1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2/* 3 * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de> 4 */ 5 6#include "stm32mp15-pinctrl.dtsi" 7#include "stm32mp15xxaa-pinctrl.dtsi" 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/mfd/st,stpmic1.h> 10 11/ { 12 aliases { 13 ethernet0 = ðernet0; 14 ethernet1 = &ksz8851; 15 rtc0 = &hwrtc; 16 rtc1 = &rtc; 17 }; 18 19 memory@c0000000 { 20 device_type = "memory"; 21 reg = <0xC0000000 0x40000000>; 22 }; 23 24 reserved-memory { 25 #address-cells = <1>; 26 #size-cells = <1>; 27 ranges; 28 29 mcuram2: mcuram2@10000000 { 30 compatible = "shared-dma-pool"; 31 reg = <0x10000000 0x40000>; 32 no-map; 33 }; 34 35 vdev0vring0: vdev0vring0@10040000 { 36 compatible = "shared-dma-pool"; 37 reg = <0x10040000 0x1000>; 38 no-map; 39 }; 40 41 vdev0vring1: vdev0vring1@10041000 { 42 compatible = "shared-dma-pool"; 43 reg = <0x10041000 0x1000>; 44 no-map; 45 }; 46 47 vdev0buffer: vdev0buffer@10042000 { 48 compatible = "shared-dma-pool"; 49 reg = <0x10042000 0x4000>; 50 no-map; 51 }; 52 53 mcuram: mcuram@30000000 { 54 compatible = "shared-dma-pool"; 55 reg = <0x30000000 0x40000>; 56 no-map; 57 }; 58 59 retram: retram@38000000 { 60 compatible = "shared-dma-pool"; 61 reg = <0x38000000 0x10000>; 62 no-map; 63 }; 64 }; 65 66 ethernet_vio: vioregulator { 67 compatible = "regulator-fixed"; 68 regulator-name = "vio"; 69 regulator-min-microvolt = <3300000>; 70 regulator-max-microvolt = <3300000>; 71 gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; 72 regulator-always-on; 73 regulator-boot-on; 74 vin-supply = <&vdd>; 75 }; 76}; 77 78&adc { 79 vdd-supply = <&vdd>; 80 vdda-supply = <&vdda>; 81 vref-supply = <&vdda>; 82 status = "okay"; 83}; 84 85&adc1 { 86 channel@0 { 87 reg = <0>; 88 st,min-sample-time-ns = <5000>; 89 }; 90}; 91 92&adc2 { 93 channel@1 { 94 reg = <1>; 95 st,min-sample-time-ns = <5000>; 96 }; 97}; 98 99&crc1 { 100 status = "okay"; 101}; 102 103&dac { 104 pinctrl-names = "default"; 105 pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; 106 vref-supply = <&vdda>; 107 status = "okay"; 108 109 dac1: dac@1 { 110 status = "okay"; 111 }; 112 dac2: dac@2 { 113 status = "okay"; 114 }; 115}; 116 117&dts { 118 status = "okay"; 119}; 120 121ðernet0 { 122 status = "okay"; 123 pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; 124 pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; 125 pinctrl-names = "default", "sleep"; 126 phy-mode = "rmii"; 127 max-speed = <100>; 128 phy-handle = <&phy0>; 129 130 mdio { 131 #address-cells = <1>; 132 #size-cells = <0>; 133 compatible = "snps,dwmac-mdio"; 134 135 phy0: ethernet-phy@1 { 136 reg = <1>; 137 /* LAN8710Ai */ 138 compatible = "ethernet-phy-id0007.c0f0", 139 "ethernet-phy-ieee802.3-c22"; 140 clocks = <&rcc CK_MCO2>; 141 reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; 142 reset-assert-us = <500>; 143 reset-deassert-us = <500>; 144 smsc,disable-energy-detect; 145 interrupt-parent = <&gpioi>; 146 interrupts = <11 IRQ_TYPE_LEVEL_LOW>; 147 }; 148 }; 149}; 150 151&fmc { 152 pinctrl-names = "default", "sleep"; 153 pinctrl-0 = <&fmc_pins_b>; 154 pinctrl-1 = <&fmc_sleep_pins_b>; 155 status = "okay"; 156 157 ksz8851: ethernet@1,0 { 158 compatible = "micrel,ks8851-mll"; 159 reg = <1 0x0 0x2>, <1 0x2 0x20000>; 160 interrupt-parent = <&gpioc>; 161 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 162 bank-width = <2>; 163 164 /* Timing values are in nS */ 165 st,fmc2-ebi-cs-mux-enable; 166 st,fmc2-ebi-cs-transaction-type = <4>; 167 st,fmc2-ebi-cs-buswidth = <16>; 168 st,fmc2-ebi-cs-address-setup-ns = <5>; 169 st,fmc2-ebi-cs-address-hold-ns = <5>; 170 st,fmc2-ebi-cs-bus-turnaround-ns = <5>; 171 st,fmc2-ebi-cs-data-setup-ns = <45>; 172 st,fmc2-ebi-cs-data-hold-ns = <1>; 173 st,fmc2-ebi-cs-write-address-setup-ns = <5>; 174 st,fmc2-ebi-cs-write-address-hold-ns = <5>; 175 st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; 176 st,fmc2-ebi-cs-write-data-setup-ns = <45>; 177 st,fmc2-ebi-cs-write-data-hold-ns = <1>; 178 }; 179}; 180 181&gpioa { 182 gpio-line-names = "", "", "", "", 183 "", "", "DHCOM-K", "", 184 "", "", "", "", 185 "", "", "", ""; 186}; 187 188&gpiob { 189 gpio-line-names = "", "", "", "", 190 "", "", "", "", 191 "DHCOM-Q", "", "", "", 192 "", "", "", ""; 193}; 194 195&gpioc { 196 gpio-line-names = "", "", "", "", 197 "", "", "DHCOM-E", "", 198 "", "", "", "", 199 "", "", "", ""; 200}; 201 202&gpiod { 203 gpio-line-names = "", "", "", "", 204 "", "", "DHCOM-B", "", 205 "", "", "", "DHCOM-F", 206 "DHCOM-D", "", "", ""; 207}; 208 209&gpioe { 210 gpio-line-names = "", "", "", "", 211 "", "", "DHCOM-P", "", 212 "", "", "", "", 213 "", "", "", ""; 214}; 215 216&gpiof { 217 gpio-line-names = "", "", "", "DHCOM-A", 218 "", "", "", "", 219 "", "", "", "", 220 "", "", "", ""; 221}; 222 223&gpiog { 224 gpio-line-names = "DHCOM-C", "", "", "", 225 "", "", "", "", 226 "DHCOM-L", "", "", "", 227 "", "", "", ""; 228}; 229 230&gpioh { 231 gpio-line-names = "", "", "", "", 232 "", "", "", "DHCOM-N", 233 "DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U", 234 "DHCOM-T", "", "DHCOM-S", ""; 235}; 236 237&gpioi { 238 gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I", 239 "DHCOM-R", "DHCOM-M", "", "", 240 "", "", "", "", 241 "", "", "", ""; 242}; 243 244&i2c4 { 245 pinctrl-names = "default"; 246 pinctrl-0 = <&i2c4_pins_a>; 247 i2c-scl-rising-time-ns = <185>; 248 i2c-scl-falling-time-ns = <20>; 249 status = "okay"; 250 /* spare dmas for other usage */ 251 /delete-property/dmas; 252 /delete-property/dma-names; 253 254 hwrtc: rtc@32 { 255 compatible = "microcrystal,rv8803"; 256 reg = <0x32>; 257 }; 258 259 pmic: stpmic@33 { 260 compatible = "st,stpmic1"; 261 reg = <0x33>; 262 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; 263 interrupt-controller; 264 #interrupt-cells = <2>; 265 status = "okay"; 266 267 regulators { 268 compatible = "st,stpmic1-regulators"; 269 ldo1-supply = <&v3v3>; 270 ldo2-supply = <&v3v3>; 271 ldo3-supply = <&vdd_ddr>; 272 ldo5-supply = <&v3v3>; 273 ldo6-supply = <&v3v3>; 274 pwr_sw1-supply = <&bst_out>; 275 pwr_sw2-supply = <&bst_out>; 276 277 vddcore: buck1 { 278 regulator-name = "vddcore"; 279 regulator-min-microvolt = <800000>; 280 regulator-max-microvolt = <1350000>; 281 regulator-always-on; 282 regulator-initial-mode = <0>; 283 regulator-over-current-protection; 284 }; 285 286 vdd_ddr: buck2 { 287 regulator-name = "vdd_ddr"; 288 regulator-min-microvolt = <1350000>; 289 regulator-max-microvolt = <1350000>; 290 regulator-always-on; 291 regulator-initial-mode = <0>; 292 regulator-over-current-protection; 293 }; 294 295 vdd: buck3 { 296 regulator-name = "vdd"; 297 regulator-min-microvolt = <3300000>; 298 regulator-max-microvolt = <3300000>; 299 regulator-always-on; 300 st,mask-reset; 301 regulator-initial-mode = <0>; 302 regulator-over-current-protection; 303 }; 304 305 v3v3: buck4 { 306 regulator-name = "v3v3"; 307 regulator-min-microvolt = <3300000>; 308 regulator-max-microvolt = <3300000>; 309 regulator-always-on; 310 regulator-over-current-protection; 311 regulator-initial-mode = <0>; 312 }; 313 314 vdda: ldo1 { 315 regulator-name = "vdda"; 316 regulator-always-on; 317 regulator-min-microvolt = <2900000>; 318 regulator-max-microvolt = <2900000>; 319 interrupts = <IT_CURLIM_LDO1 0>; 320 }; 321 322 v2v8: ldo2 { 323 regulator-name = "v2v8"; 324 regulator-min-microvolt = <2800000>; 325 regulator-max-microvolt = <2800000>; 326 interrupts = <IT_CURLIM_LDO2 0>; 327 }; 328 329 vtt_ddr: ldo3 { 330 regulator-name = "vtt_ddr"; 331 regulator-min-microvolt = <500000>; 332 regulator-max-microvolt = <750000>; 333 regulator-always-on; 334 regulator-over-current-protection; 335 }; 336 337 vdd_usb: ldo4 { 338 regulator-name = "vdd_usb"; 339 interrupts = <IT_CURLIM_LDO4 0>; 340 }; 341 342 vdd_sd: ldo5 { 343 regulator-name = "vdd_sd"; 344 regulator-min-microvolt = <2900000>; 345 regulator-max-microvolt = <2900000>; 346 interrupts = <IT_CURLIM_LDO5 0>; 347 regulator-boot-on; 348 }; 349 350 v1v8: ldo6 { 351 regulator-name = "v1v8"; 352 regulator-min-microvolt = <1800000>; 353 regulator-max-microvolt = <1800000>; 354 interrupts = <IT_CURLIM_LDO6 0>; 355 }; 356 357 vref_ddr: vref_ddr { 358 regulator-name = "vref_ddr"; 359 regulator-always-on; 360 }; 361 362 bst_out: boost { 363 regulator-name = "bst_out"; 364 interrupts = <IT_OCP_BOOST 0>; 365 }; 366 367 vbus_otg: pwr_sw1 { 368 regulator-name = "vbus_otg"; 369 interrupts = <IT_OCP_OTG 0>; 370 }; 371 372 vbus_sw: pwr_sw2 { 373 regulator-name = "vbus_sw"; 374 interrupts = <IT_OCP_SWOUT 0>; 375 regulator-active-discharge = <1>; 376 }; 377 }; 378 379 onkey { 380 compatible = "st,stpmic1-onkey"; 381 interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; 382 interrupt-names = "onkey-falling", "onkey-rising"; 383 power-off-time-sec = <10>; 384 status = "okay"; 385 }; 386 387 watchdog { 388 compatible = "st,stpmic1-wdt"; 389 status = "disabled"; 390 }; 391 }; 392 393 touchscreen@49 { 394 compatible = "ti,tsc2004"; 395 reg = <0x49>; 396 vio-supply = <&v3v3>; 397 interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>; 398 }; 399 400 eeprom@50 { 401 compatible = "atmel,24c02"; 402 reg = <0x50>; 403 pagesize = <16>; 404 }; 405}; 406 407&ipcc { 408 status = "okay"; 409}; 410 411&iwdg2 { 412 timeout-sec = <32>; 413 status = "okay"; 414}; 415 416&m4_rproc { 417 memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, 418 <&vdev0vring1>, <&vdev0buffer>; 419 mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; 420 mbox-names = "vq0", "vq1", "shutdown", "detach"; 421 interrupt-parent = <&exti>; 422 interrupts = <68 1>; 423 status = "okay"; 424}; 425 426&pwr_regulators { 427 vdd-supply = <&vdd>; 428 vdd_3v3_usbfs-supply = <&vdd_usb>; 429}; 430 431&qspi { 432 pinctrl-names = "default", "sleep"; 433 pinctrl-0 = <&qspi_clk_pins_a 434 &qspi_bk1_pins_a 435 &qspi_cs1_pins_a>; 436 pinctrl-1 = <&qspi_clk_sleep_pins_a 437 &qspi_bk1_sleep_pins_a 438 &qspi_cs1_sleep_pins_a>; 439 reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; 440 #address-cells = <1>; 441 #size-cells = <0>; 442 status = "okay"; 443 444 flash0: flash@0 { 445 compatible = "jedec,spi-nor"; 446 reg = <0>; 447 spi-rx-bus-width = <4>; 448 spi-max-frequency = <108000000>; 449 #address-cells = <1>; 450 #size-cells = <1>; 451 }; 452}; 453 454&rcc { 455 /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ 456 clocks = <&rcc CK_MCO2>; 457 clock-names = "ETH_RX_CLK/ETH_REF_CLK"; 458 459 /* 460 * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, 461 * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, 462 * so that MCO2 behaves as a divider for the ETHRX clock here. 463 */ 464 assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; 465 assigned-clock-parents = <&rcc PLL4_P>; 466 assigned-clock-rates = <50000000>, <100000000>; 467}; 468 469&rng1 { 470 status = "okay"; 471}; 472 473&rtc { 474 status = "okay"; 475}; 476 477&sdmmc1 { 478 pinctrl-names = "default", "opendrain", "sleep", "init"; 479 pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; 480 pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; 481 pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; 482 pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>; 483 cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; 484 disable-wp; 485 st,sig-dir; 486 st,neg-edge; 487 st,use-ckin; 488 st,cmd-gpios = <&gpiod 2 0>; 489 st,ck-gpios = <&gpioc 12 0>; 490 st,ckin-gpios = <&gpioe 4 0>; 491 bus-width = <4>; 492 vmmc-supply = <&vdd_sd>; 493 status = "okay"; 494}; 495 496&sdmmc1_b4_pins_a { 497 /* 498 * SD bus pull-up resistors: 499 * - optional on SoMs with SD voltage translator 500 * - mandatory on SoMs without SD voltage translator 501 */ 502 pins1 { 503 bias-pull-up; 504 }; 505 pins2 { 506 bias-pull-up; 507 }; 508}; 509 510&sdmmc2 { 511 pinctrl-names = "default", "opendrain", "sleep"; 512 pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; 513 pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; 514 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; 515 non-removable; 516 no-sd; 517 no-sdio; 518 st,neg-edge; 519 bus-width = <8>; 520 vmmc-supply = <&v3v3>; 521 vqmmc-supply = <&v3v3>; 522 mmc-ddr-3_3v; 523 status = "okay"; 524}; 525 526&sdmmc3 { 527 pinctrl-names = "default", "opendrain", "sleep"; 528 pinctrl-0 = <&sdmmc3_b4_pins_a>; 529 pinctrl-1 = <&sdmmc3_b4_od_pins_a>; 530 pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; 531 broken-cd; 532 st,neg-edge; 533 bus-width = <4>; 534 vmmc-supply = <&v3v3>; 535 vqmmc-supply = <&v3v3>; 536 mmc-ddr-3_3v; 537 status = "okay"; 538}; 539 540&uart4 { 541 pinctrl-names = "default"; 542 pinctrl-0 = <&uart4_pins_a>; 543 /delete-property/dmas; 544 /delete-property/dma-names; 545 status = "okay"; 546}; 547