1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2/* 3 * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. 4 */ 5 6/dts-v1/; 7 8#include "stm32mp157.dtsi" 9#include "stm32mp15xc.dtsi" 10#include "stm32mp15-pinctrl.dtsi" 11#include "stm32mp15xxac-pinctrl.dtsi" 12#include <dt-bindings/gpio/gpio.h> 13#include <dt-bindings/leds/common.h> 14#include <dt-bindings/mfd/st,stpmic1.h> 15 16/ { 17 model = "Seeed Studio Odyssey-STM32MP157C SOM"; 18 compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; 19 20 memory@c0000000 { 21 device_type = "memory"; 22 reg = <0xc0000000 0x20000000>; 23 }; 24 25 reserved-memory { 26 #address-cells = <1>; 27 #size-cells = <1>; 28 ranges; 29 30 mcuram2: mcuram2@10000000 { 31 compatible = "shared-dma-pool"; 32 reg = <0x10000000 0x40000>; 33 no-map; 34 }; 35 36 vdev0vring0: vdev0vring0@10040000 { 37 compatible = "shared-dma-pool"; 38 reg = <0x10040000 0x1000>; 39 no-map; 40 }; 41 42 vdev0vring1: vdev0vring1@10041000 { 43 compatible = "shared-dma-pool"; 44 reg = <0x10041000 0x1000>; 45 no-map; 46 }; 47 48 vdev0buffer: vdev0buffer@10042000 { 49 compatible = "shared-dma-pool"; 50 reg = <0x10042000 0x4000>; 51 no-map; 52 }; 53 54 mcuram: mcuram@30000000 { 55 compatible = "shared-dma-pool"; 56 reg = <0x30000000 0x40000>; 57 no-map; 58 }; 59 60 retram: retram@38000000 { 61 compatible = "shared-dma-pool"; 62 reg = <0x38000000 0x10000>; 63 no-map; 64 }; 65 }; 66 67 led { 68 compatible = "gpio-leds"; 69 led-blue { 70 color = <LED_COLOR_ID_BLUE>; 71 function = LED_FUNCTION_HEARTBEAT; 72 gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; 73 linux,default-trigger = "heartbeat"; 74 }; 75 }; 76}; 77 78&i2c2 { 79 pinctrl-names = "default"; 80 pinctrl-0 = <&i2c2_pins_a>; 81 i2c-scl-rising-time-ns = <185>; 82 i2c-scl-falling-time-ns = <20>; 83 status = "okay"; 84 /* spare dmas for other usage */ 85 /delete-property/dmas; 86 /delete-property/dma-names; 87 88 pmic: stpmic@33 { 89 compatible = "st,stpmic1"; 90 reg = <0x33>; 91 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; 92 interrupt-controller; 93 #interrupt-cells = <2>; 94 95 regulators { 96 compatible = "st,stpmic1-regulators"; 97 ldo1-supply = <&v3v3>; 98 ldo3-supply = <&vdd_ddr>; 99 ldo6-supply = <&v3v3>; 100 pwr_sw1-supply = <&bst_out>; 101 pwr_sw2-supply = <&bst_out>; 102 103 vddcore: buck1 { 104 regulator-name = "vddcore"; 105 regulator-min-microvolt = <800000>; 106 regulator-max-microvolt = <1350000>; 107 regulator-always-on; 108 regulator-initial-mode = <0>; 109 regulator-over-current-protection; 110 }; 111 112 vdd_ddr: buck2 { 113 regulator-name = "vdd_ddr"; 114 regulator-min-microvolt = <1350000>; 115 regulator-max-microvolt = <1350000>; 116 regulator-always-on; 117 regulator-initial-mode = <0>; 118 regulator-over-current-protection; 119 }; 120 121 vdd: buck3 { 122 regulator-name = "vdd"; 123 regulator-min-microvolt = <3300000>; 124 regulator-max-microvolt = <3300000>; 125 regulator-always-on; 126 st,mask-reset; 127 regulator-initial-mode = <0>; 128 regulator-over-current-protection; 129 }; 130 131 v3v3: buck4 { 132 regulator-name = "v3v3"; 133 regulator-min-microvolt = <3300000>; 134 regulator-max-microvolt = <3300000>; 135 regulator-always-on; 136 regulator-over-current-protection; 137 regulator-initial-mode = <0>; 138 }; 139 140 v1v8_audio: ldo1 { 141 regulator-name = "v1v8_audio"; 142 regulator-min-microvolt = <1800000>; 143 regulator-max-microvolt = <1800000>; 144 regulator-always-on; 145 interrupts = <IT_CURLIM_LDO1 0>; 146 }; 147 148 v3v3_hdmi: ldo2 { 149 regulator-name = "v3v3_hdmi"; 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 regulator-always-on; 153 interrupts = <IT_CURLIM_LDO2 0>; 154 }; 155 156 vtt_ddr: ldo3 { 157 regulator-name = "vtt_ddr"; 158 regulator-min-microvolt = <500000>; 159 regulator-max-microvolt = <750000>; 160 regulator-always-on; 161 regulator-over-current-protection; 162 }; 163 164 vdd_usb: ldo4 { 165 regulator-name = "vdd_usb"; 166 interrupts = <IT_CURLIM_LDO4 0>; 167 }; 168 169 vdda: ldo5 { 170 regulator-name = "vdda"; 171 regulator-min-microvolt = <2900000>; 172 regulator-max-microvolt = <2900000>; 173 interrupts = <IT_CURLIM_LDO5 0>; 174 regulator-boot-on; 175 }; 176 177 v1v2_hdmi: ldo6 { 178 regulator-name = "v1v2_hdmi"; 179 regulator-min-microvolt = <1200000>; 180 regulator-max-microvolt = <1200000>; 181 regulator-always-on; 182 interrupts = <IT_CURLIM_LDO6 0>; 183 }; 184 185 vref_ddr: vref_ddr { 186 regulator-name = "vref_ddr"; 187 regulator-always-on; 188 }; 189 190 bst_out: boost { 191 regulator-name = "bst_out"; 192 interrupts = <IT_OCP_BOOST 0>; 193 }; 194 195 vbus_otg: pwr_sw1 { 196 regulator-name = "vbus_otg"; 197 interrupts = <IT_OCP_OTG 0>; 198 }; 199 200 vbus_sw: pwr_sw2 { 201 regulator-name = "vbus_sw"; 202 interrupts = <IT_OCP_SWOUT 0>; 203 regulator-active-discharge = <1>; 204 }; 205 }; 206 207 onkey { 208 compatible = "st,stpmic1-onkey"; 209 interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; 210 interrupt-names = "onkey-falling", "onkey-rising"; 211 power-off-time-sec = <10>; 212 }; 213 214 watchdog { 215 compatible = "st,stpmic1-wdt"; 216 status = "disabled"; 217 }; 218 }; 219}; 220 221&ipcc { 222 status = "okay"; 223}; 224 225&iwdg2 { 226 timeout-sec = <32>; 227 status = "okay"; 228}; 229 230&m4_rproc { 231 memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, 232 <&vdev0vring1>, <&vdev0buffer>; 233 mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; 234 mbox-names = "vq0", "vq1", "shutdown", "detach"; 235 interrupt-parent = <&exti>; 236 interrupts = <68 1>; 237 status = "okay"; 238}; 239 240&rng1 { 241 status = "okay"; 242}; 243 244&rtc { 245 status = "okay"; 246}; 247 248&sdmmc2 { 249 pinctrl-names = "default", "opendrain", "sleep"; 250 pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>; 251 pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_d>; 252 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>; 253 non-removable; 254 no-sd; 255 no-sdio; 256 st,neg-edge; 257 bus-width = <8>; 258 vmmc-supply = <&v3v3>; 259 vqmmc-supply = <&vdd>; 260 mmc-ddr-3_3v; 261 status = "okay"; 262}; 263 264