xref: /linux/arch/arm/boot/dts/st/stih407-family.dtsi (revision bf36793fa260cb68cc817f311f1f683788261796)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2014 STMicroelectronics Limited.
4 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
5 */
6#include "stih407-pinctrl.dtsi"
7#include <dt-bindings/mfd/st-lpc.h>
8#include <dt-bindings/phy/phy.h>
9#include <dt-bindings/reset/stih407-resets.h>
10#include <dt-bindings/interrupt-controller/irq-st.h>
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14
15	reserved-memory {
16		#address-cells = <1>;
17		#size-cells = <1>;
18		ranges;
19
20		gp0_reserved: rproc@45000000 {
21			compatible = "shared-dma-pool";
22			reg = <0x45000000 0x00400000>;
23			no-map;
24		};
25
26		delta_reserved: rproc@44000000 {
27			compatible = "shared-dma-pool";
28			reg = <0x44000000 0x01000000>;
29			no-map;
30		};
31	};
32
33	cpus {
34		#address-cells = <1>;
35		#size-cells = <0>;
36		cpu0: cpu@0 {
37			device_type = "cpu";
38			compatible = "arm,cortex-a9";
39			reg = <0>;
40
41			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
42			cpu-release-addr = <0x94100A4>;
43
44					 /* kHz     uV   */
45			operating-points = <1500000 0
46					    1200000 0
47					    800000  0
48					    500000  0>;
49
50			clocks = <&clk_m_a9>;
51			clock-names = "cpu";
52			clock-latency = <100000>;
53			cpu0-supply = <&pwm_regulator>;
54			st,syscfg = <&syscfg_core 0x8e0>;
55			#cooling-cells = <2>;
56		};
57		cpu1: cpu@1 {
58			device_type = "cpu";
59			compatible = "arm,cortex-a9";
60			reg = <1>;
61
62			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
63			cpu-release-addr = <0x94100A4>;
64
65					 /* kHz     uV   */
66			operating-points = <1500000 0
67					    1200000 0
68					    800000  0
69					    500000  0>;
70			#cooling-cells = <2>;
71		};
72	};
73
74	intc: interrupt-controller@8761000 {
75		compatible = "arm,cortex-a9-gic";
76		#interrupt-cells = <3>;
77		interrupt-controller;
78		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
79	};
80
81	scu@8760000 {
82		compatible = "arm,cortex-a9-scu";
83		reg = <0x08760000 0x1000>;
84	};
85
86	timer@8760200 {
87		interrupt-parent = <&intc>;
88		compatible = "arm,cortex-a9-global-timer";
89		reg = <0x08760200 0x100>;
90		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
91		clocks = <&arm_periph_clk>;
92	};
93
94	l2: cache-controller@8762000 {
95		compatible = "arm,pl310-cache";
96		reg = <0x08762000 0x1000>;
97		arm,data-latency = <3 3 3>;
98		arm,tag-latency = <2 2 2>;
99		cache-unified;
100		cache-level = <2>;
101	};
102
103	arm-pmu {
104		interrupt-parent = <&intc>;
105		compatible = "arm,cortex-a9-pmu";
106		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
107	};
108
109	pwm_regulator: pwm-regulator {
110		compatible = "pwm-regulator";
111		pwms = <&pwm1 3 8448>;
112		regulator-name = "CPU_1V0_AVS";
113		regulator-min-microvolt = <784000>;
114		regulator-max-microvolt = <1299000>;
115		regulator-always-on;
116		status = "okay";
117	};
118
119	restart: restart-controller {
120		compatible = "st,stih407-restart";
121		st,syscfg = <&syscfg_sbc_reg>;
122		status = "okay";
123	};
124
125	powerdown: powerdown-controller {
126		compatible = "st,stih407-powerdown";
127		#reset-cells = <1>;
128	};
129
130	softreset: softreset-controller {
131		compatible = "st,stih407-softreset";
132		#reset-cells = <1>;
133	};
134
135	picophyreset: picophyreset-controller {
136		compatible = "st,stih407-picophyreset";
137		#reset-cells = <1>;
138	};
139
140	irq-syscfg {
141		compatible = "st,stih407-irq-syscfg";
142		st,syscfg = <&syscfg_core>;
143		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
144				<ST_IRQ_SYSCFG_PMU_1>;
145		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
146				<ST_IRQ_SYSCFG_DISABLED>;
147	};
148
149	usb2_picophy0: phy1 {
150		compatible = "st,stih407-usb2-phy";
151		#phy-cells = <0>;
152		st,syscfg = <&syscfg_core 0x100 0xf4>;
153		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
154			 <&picophyreset STIH407_PICOPHY2_RESET>;
155		reset-names = "global", "port";
156	};
157
158	miphy28lp_phy: miphy28lp {
159		compatible = "st,miphy28lp-phy";
160		st,syscfg = <&syscfg_core>;
161		#address-cells = <1>;
162		#size-cells = <1>;
163		ranges;
164
165		phy_port0: port@9b22000 {
166			reg = <0x9b22000 0xff>,
167			      <0x9b09000 0xff>,
168			      <0x9b04000 0xff>;
169			reg-names = "sata-up",
170				    "pcie-up",
171				    "pipew";
172
173			st,syscfg = <0x114 0x818 0xe0 0xec>;
174			#phy-cells = <1>;
175
176			reset-names = "miphy-sw-rst";
177			resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
178		};
179
180		phy_port1: port@9b2a000 {
181			reg = <0x9b2a000 0xff>,
182			      <0x9b19000 0xff>,
183			      <0x9b14000 0xff>;
184			reg-names = "sata-up",
185				    "pcie-up",
186				    "pipew";
187
188			st,syscfg = <0x118 0x81c 0xe4 0xf0>;
189
190			#phy-cells = <1>;
191
192			reset-names = "miphy-sw-rst";
193			resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
194		};
195
196		phy_port2: port@8f95000 {
197			reg = <0x8f95000 0xff>,
198			      <0x8f90000 0xff>;
199			reg-names = "pipew",
200				    "usb3-up";
201
202			st,syscfg = <0x11c 0x820>;
203
204			#phy-cells = <1>;
205
206			reset-names = "miphy-sw-rst";
207			resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
208		};
209	};
210
211	st231_gp0: st231-gp0 {
212		compatible = "st,st231-rproc";
213		memory-region = <&gp0_reserved>;
214		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
215		reset-names = "sw_reset";
216		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
217		clock-frequency = <600000000>;
218		st,syscfg = <&syscfg_core 0x22c>;
219		#mbox-cells = <1>;
220		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
221		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
222	};
223
224	st231_delta: st231-delta {
225		compatible = "st,st231-rproc";
226		memory-region = <&delta_reserved>;
227		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
228		reset-names = "sw_reset";
229		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
230		clock-frequency = <600000000>;
231		st,syscfg = <&syscfg_core 0x224>;
232		#mbox-cells = <1>;
233		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
234		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
235	};
236
237	delta0 {
238		compatible = "st,st-delta";
239		clock-names = "delta",
240			      "delta-st231",
241			      "delta-flash-promip";
242		clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
243			 <&clk_s_c0_flexgen CLK_ST231_DMU>,
244			 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
245	};
246
247	soc {
248		#address-cells = <1>;
249		#size-cells = <1>;
250		interrupt-parent = <&intc>;
251		ranges;
252		compatible = "simple-bus";
253
254		syscfg_sbc: sbc-syscfg@9620000 {
255			compatible = "st,stih407-sbc-syscfg", "syscon";
256			reg = <0x9620000 0x1000>;
257		};
258
259		syscfg_front: front-syscfg@9280000 {
260			compatible = "st,stih407-front-syscfg", "syscon";
261			reg = <0x9280000 0x1000>;
262		};
263
264		syscfg_rear: rear-syscfg@9290000 {
265			compatible = "st,stih407-rear-syscfg", "syscon";
266			reg = <0x9290000 0x1000>;
267		};
268
269		syscfg_flash: flash-syscfg@92a0000 {
270			compatible = "st,stih407-flash-syscfg", "syscon";
271			reg = <0x92a0000 0x1000>;
272		};
273
274		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
275			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
276			reg = <0x9600000 0x1000>;
277		};
278
279		syscfg_core: core-syscfg@92b0000 {
280			compatible = "st,stih407-core-syscfg", "syscon";
281			reg = <0x92b0000 0x1000>;
282
283			sti_sasg_codec: sti-sasg-codec {
284				compatible = "st,stih407-sas-codec";
285				#sound-dai-cells = <1>;
286				status = "disabled";
287				st,syscfg = <&syscfg_core>;
288			};
289		};
290
291		syscfg_lpm: lpm-syscfg@94b5100 {
292			compatible = "st,stih407-lpm-syscfg", "syscon";
293			reg = <0x94b5100 0x1000>;
294		};
295
296		/* Display */
297		vtg_main: sti-vtg-main@8d02800 {
298			compatible = "st,vtg";
299			reg = <0x8d02800 0x200>;
300			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
301		};
302
303		vtg_aux: sti-vtg-aux@8d00200 {
304			compatible = "st,vtg";
305			reg = <0x8d00200 0x100>;
306			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
307		};
308
309		serial@9830000 {
310			compatible = "st,asc";
311			reg = <0x9830000 0x2c>;
312			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
313			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
314			/* Pinctrl moved out to a per-board configuration */
315
316			status = "disabled";
317		};
318
319		serial@9831000 {
320			compatible = "st,asc";
321			reg = <0x9831000 0x2c>;
322			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
323			pinctrl-names = "default";
324			pinctrl-0 = <&pinctrl_serial1>;
325			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
326
327			status = "disabled";
328		};
329
330		serial@9832000 {
331			compatible = "st,asc";
332			reg = <0x9832000 0x2c>;
333			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
334			pinctrl-names = "default";
335			pinctrl-0 = <&pinctrl_serial2>;
336			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
337
338			status = "disabled";
339		};
340
341		/* SBC_ASC0 - UART10 */
342		sbc_serial0: serial@9530000 {
343			compatible = "st,asc";
344			reg = <0x9530000 0x2c>;
345			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
346			pinctrl-names = "default";
347			pinctrl-0 = <&pinctrl_sbc_serial0>;
348			clocks = <&clk_sysin>;
349
350			status = "disabled";
351		};
352
353		serial@9531000 {
354			compatible = "st,asc";
355			reg = <0x9531000 0x2c>;
356			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
357			pinctrl-names = "default";
358			pinctrl-0 = <&pinctrl_sbc_serial1>;
359			clocks = <&clk_sysin>;
360
361			status = "disabled";
362		};
363
364		i2c@9840000 {
365			compatible = "st,comms-ssc4-i2c";
366			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
367			reg = <0x9840000 0x110>;
368			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
369			clock-names = "ssc";
370			clock-frequency = <400000>;
371			pinctrl-names = "default";
372			pinctrl-0 = <&pinctrl_i2c0_default>;
373			#address-cells = <1>;
374			#size-cells = <0>;
375
376			status = "disabled";
377		};
378
379		i2c@9841000 {
380			compatible = "st,comms-ssc4-i2c";
381			reg = <0x9841000 0x110>;
382			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
383			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
384			clock-names = "ssc";
385			clock-frequency = <400000>;
386			pinctrl-names = "default";
387			pinctrl-0 = <&pinctrl_i2c1_default>;
388			#address-cells = <1>;
389			#size-cells = <0>;
390
391			status = "disabled";
392		};
393
394		i2c@9842000 {
395			compatible = "st,comms-ssc4-i2c";
396			reg = <0x9842000 0x110>;
397			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
398			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
399			clock-names = "ssc";
400			clock-frequency = <400000>;
401			pinctrl-names = "default";
402			pinctrl-0 = <&pinctrl_i2c2_default>;
403			#address-cells = <1>;
404			#size-cells = <0>;
405
406			status = "disabled";
407		};
408
409		i2c@9843000 {
410			compatible = "st,comms-ssc4-i2c";
411			reg = <0x9843000 0x110>;
412			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
413			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
414			clock-names = "ssc";
415			clock-frequency = <400000>;
416			pinctrl-names = "default";
417			pinctrl-0 = <&pinctrl_i2c3_default>;
418			#address-cells = <1>;
419			#size-cells = <0>;
420
421			status = "disabled";
422		};
423
424		i2c@9844000 {
425			compatible = "st,comms-ssc4-i2c";
426			reg = <0x9844000 0x110>;
427			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
428			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
429			clock-names = "ssc";
430			clock-frequency = <400000>;
431			pinctrl-names = "default";
432			pinctrl-0 = <&pinctrl_i2c4_default>;
433			#address-cells = <1>;
434			#size-cells = <0>;
435
436			status = "disabled";
437		};
438
439		i2c@9845000 {
440			compatible = "st,comms-ssc4-i2c";
441			reg = <0x9845000 0x110>;
442			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
443			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
444			clock-names = "ssc";
445			clock-frequency = <400000>;
446			pinctrl-names = "default";
447			pinctrl-0 = <&pinctrl_i2c5_default>;
448			#address-cells = <1>;
449			#size-cells = <0>;
450
451			status = "disabled";
452		};
453
454
455		/* SSCs on SBC */
456		i2c@9540000 {
457			compatible = "st,comms-ssc4-i2c";
458			reg = <0x9540000 0x110>;
459			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
460			clocks = <&clk_sysin>;
461			clock-names = "ssc";
462			clock-frequency = <400000>;
463			pinctrl-names = "default";
464			pinctrl-0 = <&pinctrl_i2c10_default>;
465			#address-cells = <1>;
466			#size-cells = <0>;
467
468			status = "disabled";
469		};
470
471		i2c@9541000 {
472			compatible = "st,comms-ssc4-i2c";
473			reg = <0x9541000 0x110>;
474			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
475			clocks = <&clk_sysin>;
476			clock-names = "ssc";
477			clock-frequency = <400000>;
478			pinctrl-names = "default";
479			pinctrl-0 = <&pinctrl_i2c11_default>;
480			#address-cells = <1>;
481			#size-cells = <0>;
482
483			status = "disabled";
484		};
485
486		spi@9840000 {
487			compatible = "st,comms-ssc4-spi";
488			reg = <0x9840000 0x110>;
489			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
490			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
491			clock-names = "ssc";
492			pinctrl-0 = <&pinctrl_spi0_default>;
493			pinctrl-names = "default";
494			#address-cells = <1>;
495			#size-cells = <0>;
496
497			status = "disabled";
498		};
499
500		spi@9841000 {
501			compatible = "st,comms-ssc4-spi";
502			reg = <0x9841000 0x110>;
503			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
504			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
505			clock-names = "ssc";
506			pinctrl-names = "default";
507			pinctrl-0 = <&pinctrl_spi1_default>;
508			#address-cells = <1>;
509			#size-cells = <0>;
510
511			status = "disabled";
512		};
513
514		spi@9842000 {
515			compatible = "st,comms-ssc4-spi";
516			reg = <0x9842000 0x110>;
517			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
518			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
519			clock-names = "ssc";
520			pinctrl-names = "default";
521			pinctrl-0 = <&pinctrl_spi2_default>;
522			#address-cells = <1>;
523			#size-cells = <0>;
524
525			status = "disabled";
526		};
527
528		spi@9843000 {
529			compatible = "st,comms-ssc4-spi";
530			reg = <0x9843000 0x110>;
531			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
532			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
533			clock-names = "ssc";
534			pinctrl-names = "default";
535			pinctrl-0 = <&pinctrl_spi3_default>;
536			#address-cells = <1>;
537			#size-cells = <0>;
538
539			status = "disabled";
540		};
541
542		spi@9844000 {
543			compatible = "st,comms-ssc4-spi";
544			reg = <0x9844000 0x110>;
545			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
546			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
547			clock-names = "ssc";
548			pinctrl-names = "default";
549			pinctrl-0 = <&pinctrl_spi4_default>;
550			#address-cells = <1>;
551			#size-cells = <0>;
552
553			status = "disabled";
554		};
555
556		/* SBC SSC */
557		spi@9540000 {
558			compatible = "st,comms-ssc4-spi";
559			reg = <0x9540000 0x110>;
560			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
561			clocks = <&clk_sysin>;
562			clock-names = "ssc";
563			pinctrl-names = "default";
564			pinctrl-0 = <&pinctrl_spi10_default>;
565			#address-cells = <1>;
566			#size-cells = <0>;
567
568			status = "disabled";
569		};
570
571		spi@9541000 {
572			compatible = "st,comms-ssc4-spi";
573			reg = <0x9541000 0x110>;
574			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
575			clocks = <&clk_sysin>;
576			clock-names = "ssc";
577			pinctrl-names = "default";
578			pinctrl-0 = <&pinctrl_spi11_default>;
579			#address-cells = <1>;
580			#size-cells = <0>;
581
582			status = "disabled";
583		};
584
585		spi@9542000 {
586			compatible = "st,comms-ssc4-spi";
587			reg = <0x9542000 0x110>;
588			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
589			clocks = <&clk_sysin>;
590			clock-names = "ssc";
591			pinctrl-names = "default";
592			pinctrl-0 = <&pinctrl_spi12_default>;
593			#address-cells = <1>;
594			#size-cells = <0>;
595
596			status = "disabled";
597		};
598
599		mmc0: sdhci@9060000 {
600			compatible = "st,sdhci-stih407", "st,sdhci";
601			status = "disabled";
602			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
603			reg-names = "mmc", "top-mmc-delay";
604			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
605			interrupt-names = "mmcirq";
606			pinctrl-names = "default";
607			pinctrl-0 = <&pinctrl_mmc0>;
608			clock-names = "mmc", "icn";
609			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
610				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
611			bus-width = <8>;
612		};
613
614		mmc1: sdhci@9080000 {
615			compatible = "st,sdhci-stih407", "st,sdhci";
616			status = "disabled";
617			reg = <0x09080000 0x7ff>;
618			reg-names = "mmc";
619			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
620			interrupt-names = "mmcirq";
621			pinctrl-names = "default";
622			pinctrl-0 = <&pinctrl_sd1>;
623			clock-names = "mmc", "icn";
624			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
625				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
626			resets = <&softreset STIH407_MMC1_SOFTRESET>;
627			bus-width = <4>;
628		};
629
630		/* Watchdog and Real-Time Clock */
631		lpc@8787000 {
632			compatible = "st,stih407-lpc";
633			reg = <0x8787000 0x1000>;
634			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
635			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
636			timeout-sec = <120>;
637			st,syscfg = <&syscfg_core>;
638			st,lpc-mode = <ST_LPC_MODE_WDT>;
639		};
640
641		lpc@8788000 {
642			compatible = "st,stih407-lpc";
643			reg = <0x8788000 0x1000>;
644			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
645			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
646			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
647		};
648
649		spifsm: spifsm@9022000 {
650			compatible = "st,spi-fsm";
651			reg = <0x9022000 0x1000>;
652			reg-names = "spi-fsm";
653			clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
654			clock-names = "emi_clk";
655			pinctrl-names = "default";
656			pinctrl-0 = <&pinctrl_fsm>;
657			st,syscfg = <&syscfg_core>;
658			st,boot-device-reg = <0x8c4>;
659			st,boot-device-spi = <0x68>;
660
661			status = "disabled";
662		};
663
664		sata0: sata@9b20000 {
665			compatible = "st,ahci";
666			reg = <0x9b20000 0x1000>;
667
668			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
669			interrupt-names = "hostc";
670
671			phys = <&phy_port0 PHY_TYPE_SATA>;
672			phy-names = "ahci_phy";
673
674			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
675				 <&softreset STIH407_SATA0_SOFTRESET>,
676				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
677			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
678
679			clock-names = "ahci_clk";
680			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
681
682			ports-implemented = <0x1>;
683
684			status = "disabled";
685		};
686
687		sata1: sata@9b28000 {
688			compatible = "st,ahci";
689			reg = <0x9b28000 0x1000>;
690
691			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
692			interrupt-names = "hostc";
693
694			phys = <&phy_port1 PHY_TYPE_SATA>;
695			phy-names = "ahci_phy";
696
697			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
698				 <&softreset STIH407_SATA1_SOFTRESET>,
699				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
700			reset-names = "pwr-dwn",
701				      "sw-rst",
702				      "pwr-rst";
703
704			clock-names = "ahci_clk";
705			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
706
707			ports-implemented = <0x1>;
708
709			status = "disabled";
710		};
711
712
713		st_dwc3: dwc3@8f94000 {
714			compatible = "st,stih407-dwc3";
715			reg = <0x08f94000 0x1000>, <0x110 0x4>;
716			reg-names = "reg-glue", "syscfg-reg";
717			st,syscfg = <&syscfg_core>;
718			resets = <&powerdown STIH407_USB3_POWERDOWN>,
719				 <&softreset STIH407_MIPHY2_SOFTRESET>;
720			reset-names = "powerdown", "softreset";
721			#address-cells = <1>;
722			#size-cells = <1>;
723			pinctrl-names = "default";
724			pinctrl-0 = <&pinctrl_usb3>;
725			ranges;
726
727			status = "disabled";
728
729			dwc3: usb@9900000 {
730				compatible = "snps,dwc3";
731				reg = <0x09900000 0x100000>;
732				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
733				dr_mode = "host";
734				phy-names = "usb2-phy", "usb3-phy";
735				phys = <&usb2_picophy0>,
736				       <&phy_port2 PHY_TYPE_USB3>;
737				snps,dis_u3_susphy_quirk;
738			};
739		};
740
741		/* COMMS PWM Module */
742		pwm0: pwm@9810000 {
743			compatible = "st,sti-pwm";
744			#pwm-cells = <2>;
745			reg = <0x9810000 0x68>;
746			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
747			pinctrl-names = "default";
748			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
749			clock-names = "pwm";
750			clocks = <&clk_sysin>;
751			st,pwm-num-chan = <1>;
752
753			status = "disabled";
754		};
755
756		/* SBC PWM Module */
757		pwm1: pwm@9510000 {
758			compatible = "st,sti-pwm";
759			#pwm-cells = <2>;
760			reg = <0x9510000 0x68>;
761			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
762			pinctrl-names = "default";
763			pinctrl-0 = <&pinctrl_pwm1_chan0_default
764				     &pinctrl_pwm1_chan1_default
765				     &pinctrl_pwm1_chan2_default
766				     &pinctrl_pwm1_chan3_default>;
767			clock-names = "pwm";
768			clocks = <&clk_sysin>;
769			st,pwm-num-chan = <4>;
770
771			status = "disabled";
772		};
773
774		rng10: rng@8a89000 {
775			compatible = "st,rng";
776			reg = <0x08a89000 0x1000>;
777			clocks = <&clk_sysin>;
778			status = "okay";
779		};
780
781		rng11: rng@8a8a000 {
782			compatible = "st,rng";
783			reg = <0x08a8a000 0x1000>;
784			clocks = <&clk_sysin>;
785			status = "okay";
786		};
787
788		ethernet0: dwmac@9630000 {
789			device_type = "network";
790			status = "disabled";
791			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
792			reg = <0x9630000 0x8000>, <0x80 0x4>;
793			reg-names = "stmmaceth", "sti-ethconf";
794
795			st,syscon = <&syscfg_sbc_reg 0x80>;
796			st,gmac_en;
797			resets = <&softreset STIH407_ETH1_SOFTRESET>;
798			reset-names = "stmmaceth";
799
800			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
801				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
802			interrupt-names = "macirq", "eth_wake_irq";
803
804			/* DMA Bus Mode */
805			snps,pbl = <8>;
806
807			pinctrl-names = "default";
808			pinctrl-0 = <&pinctrl_rgmii1>;
809
810			clock-names = "stmmaceth", "sti-ethclk";
811			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
812				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
813		};
814
815		mailbox0: mailbox@8f00000  {
816			compatible = "st,stih407-mailbox";
817			reg = <0x8f00000 0x1000>;
818			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
819			#mbox-cells = <2>;
820			mbox-name = "a9";
821			status = "okay";
822		};
823
824		mailbox1: mailbox@8f01000 {
825			compatible = "st,stih407-mailbox";
826			reg = <0x8f01000 0x1000>;
827			#mbox-cells = <2>;
828			mbox-name = "st231_gp_1";
829			status = "okay";
830		};
831
832		mailbox2: mailbox@8f02000 {
833			compatible = "st,stih407-mailbox";
834			reg = <0x8f02000 0x1000>;
835			#mbox-cells = <2>;
836			mbox-name = "st231_gp_0";
837			status = "okay";
838		};
839
840		mailbox3: mailbox@8f03000 {
841			compatible = "st,stih407-mailbox";
842			reg = <0x8f03000 0x1000>;
843			#mbox-cells = <2>;
844			mbox-name = "st231_audio_video";
845			status = "okay";
846		};
847
848		/* fdma audio */
849		fdma0: dma-controller@8e20000 {
850			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
851			reg = <0x8e20000 0x8000>,
852			      <0x8e30000 0x3000>,
853			      <0x8e37000 0x1000>,
854			      <0x8e38000 0x8000>;
855			reg-names = "slimcore", "dmem", "peripherals", "imem";
856			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
857				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
858				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
859				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
860			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
861			dma-channels = <16>;
862			#dma-cells = <3>;
863		};
864
865		/* fdma app */
866		fdma1: dma-controller@8e40000 {
867			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
868			reg = <0x8e40000 0x8000>,
869			      <0x8e50000 0x3000>,
870			      <0x8e57000 0x1000>,
871			      <0x8e58000 0x8000>;
872			reg-names = "slimcore", "dmem", "peripherals", "imem";
873			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
874				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
875				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
876				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
877
878			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
879			dma-channels = <16>;
880			#dma-cells = <3>;
881
882			status = "disabled";
883		};
884
885		/* fdma free running */
886		fdma2: dma-controller@8e60000 {
887			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
888			reg = <0x8e60000 0x8000>,
889			      <0x8e70000 0x3000>,
890			      <0x8e77000 0x1000>,
891			      <0x8e78000 0x8000>;
892			reg-names = "slimcore", "dmem", "peripherals", "imem";
893			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
894			dma-channels = <16>;
895			#dma-cells = <3>;
896			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
897				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
898				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
899				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
900
901			status = "disabled";
902		};
903
904		sti_uni_player0: sti-uni-player@8d80000 {
905			compatible = "st,stih407-uni-player-hdmi";
906			#sound-dai-cells = <0>;
907			st,syscfg = <&syscfg_core>;
908			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
909			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
910			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
911			assigned-clock-rates = <50000000>;
912			reg = <0x8d80000 0x158>;
913			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
914			dmas = <&fdma0 2 0 1>;
915			dma-names = "tx";
916
917			status = "disabled";
918		};
919
920		sti_uni_player1: sti-uni-player@8d81000 {
921			compatible = "st,stih407-uni-player-pcm-out";
922			#sound-dai-cells = <0>;
923			st,syscfg = <&syscfg_core>;
924			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
925			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
926			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
927			assigned-clock-rates = <50000000>;
928			reg = <0x8d81000 0x158>;
929			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
930			dmas = <&fdma0 3 0 1>;
931			dma-names = "tx";
932
933			status = "disabled";
934		};
935
936		sti_uni_player2: sti-uni-player@8d82000 {
937			compatible = "st,stih407-uni-player-dac";
938			#sound-dai-cells = <0>;
939			st,syscfg = <&syscfg_core>;
940			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
941			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
942			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
943			assigned-clock-rates = <50000000>;
944			reg = <0x8d82000 0x158>;
945			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
946			dmas = <&fdma0 4 0 1>;
947			dma-names = "tx";
948
949			status = "disabled";
950		};
951
952		sti_uni_player3: sti-uni-player@8d85000 {
953			compatible = "st,stih407-uni-player-spdif";
954			#sound-dai-cells = <0>;
955			st,syscfg = <&syscfg_core>;
956			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
957			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
958			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
959			assigned-clock-rates = <50000000>;
960			reg = <0x8d85000 0x158>;
961			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
962			dmas = <&fdma0 7 0 1>;
963			dma-names = "tx";
964
965			status = "disabled";
966		};
967
968		sti_uni_reader0: sti-uni-reader@8d83000 {
969			compatible = "st,stih407-uni-reader-pcm_in";
970			#sound-dai-cells = <0>;
971			st,syscfg = <&syscfg_core>;
972			reg = <0x8d83000 0x158>;
973			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
974			dmas = <&fdma0 5 0 1>;
975			dma-names = "rx";
976
977			status = "disabled";
978		};
979
980		sti_uni_reader1: sti-uni-reader@8d84000 {
981			compatible = "st,stih407-uni-reader-hdmi";
982			#sound-dai-cells = <0>;
983			st,syscfg = <&syscfg_core>;
984			reg = <0x8d84000 0x158>;
985			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
986			dmas = <&fdma0 6 0 1>;
987			dma-names = "rx";
988
989			status = "disabled";
990		};
991	};
992};
993