1724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0-or-later 2724ba675SRob Herring/* 3724ba675SRob Herring * Copyright 2012 ST-Ericsson AB 4724ba675SRob Herring */ 5724ba675SRob Herring 6724ba675SRob Herring/dts-v1/; 7724ba675SRob Herring#include "ste-db8500.dtsi" 8*beed2cc8SLinus Walleij#include "ste-href-ab8500.dtsi" 9724ba675SRob Herring#include "ste-hrefprev60.dtsi" 10724ba675SRob Herring#include "ste-href-stuib.dtsi" 11724ba675SRob Herring 12724ba675SRob Herring/ { 13724ba675SRob Herring model = "ST-Ericsson HREF (pre-v60) and ST UIB"; 14724ba675SRob Herring compatible = "st-ericsson,mop500", "st-ericsson,u8500"; 15724ba675SRob Herring 16724ba675SRob Herring /* ST6G3244ME level translator for 1.8/2.9 V */ 17724ba675SRob Herring vmmci: regulator-gpio { 18724ba675SRob Herring compatible = "regulator-gpio"; 19724ba675SRob Herring 20724ba675SRob Herring regulator-min-microvolt = <1800000>; 21724ba675SRob Herring regulator-max-microvolt = <2900000>; 22724ba675SRob Herring regulator-name = "mmci-reg"; 23724ba675SRob Herring regulator-type = "voltage"; 24724ba675SRob Herring 25724ba675SRob Herring startup-delay-us = <100>; 26724ba675SRob Herring 27724ba675SRob Herring states = <1800000 0x1 28724ba675SRob Herring 2900000 0x0>; 29724ba675SRob Herring 30724ba675SRob Herring gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; 31137062f1SKrzysztof Kozlowski enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; 32724ba675SRob Herring enable-active-high; 33724ba675SRob Herring }; 34724ba675SRob Herring 35724ba675SRob Herring soc { 36724ba675SRob Herring /* Reset line for the BU21013 touchscreen */ 37724ba675SRob Herring i2c@80110000 { 38724ba675SRob Herring /* Only one of these will be used */ 39724ba675SRob Herring bu21013_tp@5c { 40724ba675SRob Herring interrupt-parent = <&gpio2>; 41724ba675SRob Herring interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 42724ba675SRob Herring touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 43724ba675SRob Herring reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; 44724ba675SRob Herring }; 45724ba675SRob Herring bu21013_tp@5d { 46724ba675SRob Herring interrupt-parent = <&gpio2>; 47724ba675SRob Herring interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 48724ba675SRob Herring touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 49724ba675SRob Herring reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; 50724ba675SRob Herring }; 51724ba675SRob Herring }; 52724ba675SRob Herring }; 53724ba675SRob Herring}; 54