xref: /linux/arch/arm/boot/dts/samsung/exynos5260.dtsi (revision e7d759f31ca295d589f7420719c311870bb3166f)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung Exynos5260 SoC device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 *		http://www.samsung.com
7 */
8
9#include <dt-bindings/clock/exynos5260-clk.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12
13/ {
14	compatible = "samsung,exynos5260", "samsung,exynos5";
15	interrupt-parent = <&gic>;
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		i2c0 = &hsi2c_0;
21		i2c1 = &hsi2c_1;
22		i2c2 = &hsi2c_2;
23		i2c3 = &hsi2c_3;
24		pinctrl0 = &pinctrl_0;
25		pinctrl1 = &pinctrl_1;
26		pinctrl2 = &pinctrl_2;
27		serial0 = &uart0;
28		serial1 = &uart1;
29		serial2 = &uart2;
30		serial3 = &uart3;
31	};
32
33	cpus {
34		#address-cells = <1>;
35		#size-cells = <0>;
36
37		cpu-map {
38			cluster0 {
39				core0 {
40					cpu = <&cpu0>;
41				};
42				core1 {
43					cpu = <&cpu1>;
44				};
45			};
46
47			cluster1 {
48				core0 {
49					cpu = <&cpu2>;
50				};
51				core1 {
52					cpu = <&cpu3>;
53				};
54				core2 {
55					cpu = <&cpu4>;
56				};
57				core3 {
58					cpu = <&cpu5>;
59				};
60			};
61		};
62
63		cpu0: cpu@0 {
64			device_type = "cpu";
65			compatible = "arm,cortex-a15";
66			reg = <0x0>;
67			cci-control-port = <&cci_control1>;
68		};
69
70		cpu1: cpu@1 {
71			device_type = "cpu";
72			compatible = "arm,cortex-a15";
73			reg = <0x1>;
74			cci-control-port = <&cci_control1>;
75		};
76
77		cpu2: cpu@100 {
78			device_type = "cpu";
79			compatible = "arm,cortex-a7";
80			reg = <0x100>;
81			cci-control-port = <&cci_control0>;
82		};
83
84		cpu3: cpu@101 {
85			device_type = "cpu";
86			compatible = "arm,cortex-a7";
87			reg = <0x101>;
88			cci-control-port = <&cci_control0>;
89		};
90
91		cpu4: cpu@102 {
92			device_type = "cpu";
93			compatible = "arm,cortex-a7";
94			reg = <0x102>;
95			cci-control-port = <&cci_control0>;
96		};
97
98		cpu5: cpu@103 {
99			device_type = "cpu";
100			compatible = "arm,cortex-a7";
101			reg = <0x103>;
102			cci-control-port = <&cci_control0>;
103		};
104	};
105
106	soc: soc {
107		compatible = "simple-bus";
108		#address-cells = <1>;
109		#size-cells = <1>;
110		ranges;
111
112		clock_top: clock-controller@10010000 {
113			compatible = "samsung,exynos5260-clock-top";
114			reg = <0x10010000 0x10000>;
115			#clock-cells = <1>;
116			clocks = <&fin_pll>,
117				 <&clock_mif MIF_DOUT_MEM_PLL>,
118				 <&clock_mif MIF_DOUT_BUS_PLL>,
119				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
120			clock-names = "fin_pll",
121				      "dout_mem_pll",
122				      "dout_bus_pll",
123				      "dout_media_pll";
124		};
125
126		clock_peri: clock-controller@10200000 {
127			compatible = "samsung,exynos5260-clock-peri";
128			reg = <0x10200000 0x10000>;
129			#clock-cells = <1>;
130			clocks = <&fin_pll>,
131				 <&ioclk_pcm>,
132				 <&ioclk_i2s>,
133				 <&ioclk_spdif>,
134				 <&fin_pll>,
135				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
136				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
137				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
138				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
139				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
140				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
141				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
142				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
143			clock-names = "fin_pll",
144				      "ioclk_pcm_extclk",
145				      "ioclk_i2s_cdclk",
146				      "ioclk_spdif_extclk",
147				      "phyclk_hdmi_phy_ref_cko",
148				      "dout_aclk_peri_66",
149				      "dout_sclk_peri_uart0",
150				      "dout_sclk_peri_uart1",
151				      "dout_sclk_peri_uart2",
152				      "dout_sclk_peri_spi0_b",
153				      "dout_sclk_peri_spi1_b",
154				      "dout_sclk_peri_spi2_b",
155				      "dout_aclk_peri_aud";
156		};
157
158		clock_egl: clock-controller@10600000 {
159			compatible = "samsung,exynos5260-clock-egl";
160			reg = <0x10600000 0x10000>;
161			#clock-cells = <1>;
162			clocks = <&fin_pll>,
163				 <&clock_mif MIF_DOUT_BUS_PLL>;
164			clock-names = "fin_pll",
165				      "dout_bus_pll";
166		};
167
168		clock_kfc: clock-controller@10700000 {
169			compatible = "samsung,exynos5260-clock-kfc";
170			reg = <0x10700000 0x10000>;
171			#clock-cells = <1>;
172			clocks = <&fin_pll>,
173				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
174			clock-names = "fin_pll",
175				      "dout_media_pll";
176		};
177
178		clock_g2d: clock-controller@10a00000 {
179			compatible = "samsung,exynos5260-clock-g2d";
180			reg = <0x10a00000 0x10000>;
181			#clock-cells = <1>;
182			clocks = <&fin_pll>,
183				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
184			clock-names = "fin_pll",
185				      "dout_aclk_g2d_333";
186		};
187
188		clock_mif: clock-controller@10ce0000 {
189			compatible = "samsung,exynos5260-clock-mif";
190			reg = <0x10ce0000 0x10000>;
191			#clock-cells = <1>;
192			clocks = <&fin_pll>;
193			clock-names = "fin_pll";
194		};
195
196		clock_mfc: clock-controller@11090000 {
197			compatible = "samsung,exynos5260-clock-mfc";
198			reg = <0x11090000 0x10000>;
199			#clock-cells = <1>;
200			clocks = <&fin_pll>,
201				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
202			clock-names = "fin_pll",
203				      "dout_aclk_mfc_333";
204		};
205
206		clock_g3d: clock-controller@11830000 {
207			compatible = "samsung,exynos5260-clock-g3d";
208			reg = <0x11830000 0x10000>;
209			#clock-cells = <1>;
210			clocks = <&fin_pll>;
211			clock-names = "fin_pll";
212		};
213
214		clock_fsys: clock-controller@122e0000 {
215			compatible = "samsung,exynos5260-clock-fsys";
216			reg = <0x122e0000 0x10000>;
217			#clock-cells = <1>;
218			clocks = <&fin_pll>,
219				 <&fin_pll>,
220				 <&fin_pll>,
221				 <&fin_pll>,
222				 <&fin_pll>,
223				 <&fin_pll>,
224				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
225			clock-names = "fin_pll",
226				      "phyclk_usbhost20_phy_phyclock",
227				      "phyclk_usbhost20_phy_freeclk",
228				      "phyclk_usbhost20_phy_clk48mohci",
229				      "phyclk_usbdrd30_udrd30_pipe_pclk",
230				      "phyclk_usbdrd30_udrd30_phyclock",
231				      "dout_aclk_fsys_200";
232		};
233
234		clock_aud: clock-controller@128c0000 {
235			compatible = "samsung,exynos5260-clock-aud";
236			reg = <0x128c0000 0x10000>;
237			#clock-cells = <1>;
238			clocks = <&fin_pll>,
239				 <&clock_top TOP_FOUT_AUD_PLL>,
240				 <&ioclk_i2s>,
241				 <&ioclk_pcm>;
242			clock-names = "fin_pll",
243				      "fout_aud_pll",
244				      "ioclk_i2s_cdclk",
245				      "ioclk_pcm_extclk";
246		};
247
248		clock_isp: clock-controller@133c0000 {
249			compatible = "samsung,exynos5260-clock-isp";
250			reg = <0x133c0000 0x10000>;
251			#clock-cells = <1>;
252			clocks = <&fin_pll>,
253				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
254				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
255				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
256			clock-names = "fin_pll",
257				      "dout_aclk_isp1_266",
258				      "dout_aclk_isp1_400",
259				      "mout_aclk_isp1_266";
260		};
261
262		clock_gscl: clock-controller@13f00000 {
263			compatible = "samsung,exynos5260-clock-gscl";
264			reg = <0x13f00000 0x10000>;
265			#clock-cells = <1>;
266			clocks = <&fin_pll>,
267				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
268				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
269			clock-names = "fin_pll",
270				      "dout_aclk_gscl_400",
271				      "dout_aclk_gscl_333";
272		};
273
274		clock_disp: clock-controller@14550000 {
275			compatible = "samsung,exynos5260-clock-disp";
276			reg = <0x14550000 0x10000>;
277			#clock-cells = <1>;
278			clocks = <&fin_pll>,
279				 <&fin_pll>,
280				 <&fin_pll>,
281				 <&fin_pll>,
282				 <&fin_pll>,
283				 <&fin_pll>,
284				 <&fin_pll>,
285				 <&fin_pll>,
286				 <&fin_pll>,
287				 <&fin_pll>,
288				 <&fin_pll>,
289				 <&fin_pll>,
290				 <&fin_pll>,
291				 <&fin_pll>,
292				 <&ioclk_spdif>,
293				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
294				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
295				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
296				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
297			clock-names = "fin_pll",
298				      "phyclk_dptx_phy_ch3_txd_clk",
299				      "phyclk_dptx_phy_ch2_txd_clk",
300				      "phyclk_dptx_phy_ch1_txd_clk",
301				      "phyclk_dptx_phy_ch0_txd_clk",
302				      "phyclk_hdmi_phy_tmds_clko",
303				      "phyclk_hdmi_phy_ref_clko",
304				      "phyclk_hdmi_phy_pixel_clko",
305				      "phyclk_hdmi_link_o_tmds_clkhi",
306				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
307				      "phyclk_dptx_phy_o_ref_clk_24m",
308				      "phyclk_dptx_phy_clk_div2",
309				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
310				      "phyclk_hdmi_phy_ref_cko",
311				      "ioclk_spdif_extclk",
312				      "dout_aclk_peri_aud",
313				      "dout_aclk_disp_222",
314				      "dout_sclk_disp_pixel",
315				      "dout_aclk_disp_333";
316		};
317
318		gic: interrupt-controller@10481000 {
319			compatible = "arm,gic-400", "arm,cortex-a15-gic";
320			#interrupt-cells = <3>;
321			interrupt-controller;
322			reg = <0x10481000 0x1000>,
323				<0x10482000 0x2000>,
324				<0x10484000 0x2000>,
325				<0x10486000 0x2000>;
326			interrupts = <GIC_PPI 9
327					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
328		};
329
330		chipid: chipid@10000000 {
331			compatible = "samsung,exynos4210-chipid";
332			reg = <0x10000000 0x100>;
333		};
334
335		mct: timer@100b0000 {
336			compatible = "samsung,exynos5260-mct",
337				     "samsung,exynos4210-mct";
338			reg = <0x100b0000 0x1000>;
339			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
340			clock-names = "fin_pll", "mct";
341			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
342				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
343				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
344				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
345				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
346				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
347				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
348				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
349				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
350				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
351				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
352				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
353		};
354
355		cci: cci@10f00000 {
356			compatible = "arm,cci-400";
357			#address-cells = <1>;
358			#size-cells = <1>;
359			reg = <0x10f00000 0x1000>;
360			ranges = <0x0 0x10f00000 0x6000>;
361
362			cci_control0: slave-if@4000 {
363				compatible = "arm,cci-400-ctrl-if";
364				interface-type = "ace";
365				reg = <0x4000 0x1000>;
366			};
367
368			cci_control1: slave-if@5000 {
369				compatible = "arm,cci-400-ctrl-if";
370				interface-type = "ace";
371				reg = <0x5000 0x1000>;
372			};
373		};
374
375		pinctrl_0: pinctrl@11600000 {
376			compatible = "samsung,exynos5260-pinctrl";
377			reg = <0x11600000 0x1000>;
378			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
379
380			wakeup-interrupt-controller {
381				compatible = "samsung,exynos4210-wakeup-eint";
382				interrupt-parent = <&gic>;
383				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
384			};
385		};
386
387		pinctrl_1: pinctrl@12290000 {
388			compatible = "samsung,exynos5260-pinctrl";
389			reg = <0x12290000 0x1000>;
390			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
391		};
392
393		pinctrl_2: pinctrl@128b0000 {
394			compatible = "samsung,exynos5260-pinctrl";
395			reg = <0x128b0000 0x1000>;
396			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
397		};
398
399		pmu_system_controller: system-controller@10d50000 {
400			compatible = "samsung,exynos5260-pmu", "syscon";
401			reg = <0x10d50000 0x10000>;
402		};
403
404		uart0: serial@12c00000 {
405			compatible = "samsung,exynos4210-uart";
406			reg = <0x12c00000 0x100>;
407			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
408			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
409			clock-names = "uart", "clk_uart_baud0";
410			status = "disabled";
411		};
412
413		uart1: serial@12c10000 {
414			compatible = "samsung,exynos4210-uart";
415			reg = <0x12c10000 0x100>;
416			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
417			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
418			clock-names = "uart", "clk_uart_baud0";
419			status = "disabled";
420		};
421
422		uart2: serial@12c20000 {
423			compatible = "samsung,exynos4210-uart";
424			reg = <0x12c20000 0x100>;
425			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
426			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
427			clock-names = "uart", "clk_uart_baud0";
428			status = "disabled";
429		};
430
431		uart3: serial@12860000 {
432			compatible = "samsung,exynos4210-uart";
433			reg = <0x12860000 0x100>;
434			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
435			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
436			clock-names = "uart", "clk_uart_baud0";
437			status = "disabled";
438		};
439
440		mmc_0: mmc@12140000 {
441			compatible = "samsung,exynos5250-dw-mshc";
442			reg = <0x12140000 0x2000>;
443			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
444			#address-cells = <1>;
445			#size-cells = <0>;
446			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
447			clock-names = "biu", "ciu";
448			assigned-clocks =
449				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
450				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
451				<&clock_top TOP_SCLK_MMC0>;
452			assigned-clock-parents =
453				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
454				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
455			assigned-clock-rates = <0>, <0>, <800000000>;
456			fifo-depth = <64>;
457			status = "disabled";
458		};
459
460		mmc_1: mmc@12150000 {
461			compatible = "samsung,exynos5250-dw-mshc";
462			reg = <0x12150000 0x2000>;
463			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
464			#address-cells = <1>;
465			#size-cells = <0>;
466			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
467			clock-names = "biu", "ciu";
468			assigned-clocks =
469				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
470				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
471				<&clock_top TOP_SCLK_MMC1>;
472			assigned-clock-parents =
473				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
474				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
475			assigned-clock-rates = <0>, <0>, <800000000>;
476			fifo-depth = <64>;
477			status = "disabled";
478		};
479
480		mmc_2: mmc@12160000 {
481			compatible = "samsung,exynos5250-dw-mshc";
482			reg = <0x12160000 0x2000>;
483			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
484			#address-cells = <1>;
485			#size-cells = <0>;
486			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
487			clock-names = "biu", "ciu";
488			assigned-clocks =
489				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
490				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
491				<&clock_top TOP_SCLK_MMC2>;
492			assigned-clock-parents =
493				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
494				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
495			assigned-clock-rates = <0>, <0>, <800000000>;
496			fifo-depth = <64>;
497			status = "disabled";
498		};
499
500		hsi2c_0: i2c@12da0000 {
501			compatible = "samsung,exynos5260-hsi2c";
502			reg = <0x12da0000 0x1000>;
503			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
504			#address-cells = <1>;
505			#size-cells = <0>;
506			pinctrl-names = "default";
507			pinctrl-0 = <&i2c0_hs_bus>;
508			clocks = <&clock_peri PERI_CLK_HSIC0>;
509			clock-names = "hsi2c";
510			status = "disabled";
511		};
512
513		hsi2c_1: i2c@12db0000 {
514			compatible = "samsung,exynos5260-hsi2c";
515			reg = <0x12db0000 0x1000>;
516			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
517			#address-cells = <1>;
518			#size-cells = <0>;
519			pinctrl-names = "default";
520			pinctrl-0 = <&i2c1_hs_bus>;
521			clocks = <&clock_peri PERI_CLK_HSIC1>;
522			clock-names = "hsi2c";
523			status = "disabled";
524		};
525
526		hsi2c_2: i2c@12dc0000 {
527			compatible = "samsung,exynos5260-hsi2c";
528			reg = <0x12dc0000 0x1000>;
529			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
530			#address-cells = <1>;
531			#size-cells = <0>;
532			pinctrl-names = "default";
533			pinctrl-0 = <&i2c2_hs_bus>;
534			clocks = <&clock_peri PERI_CLK_HSIC2>;
535			clock-names = "hsi2c";
536			status = "disabled";
537		};
538
539		hsi2c_3: i2c@12dd0000 {
540			compatible = "samsung,exynos5260-hsi2c";
541			reg = <0x12dd0000 0x1000>;
542			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
543			#address-cells = <1>;
544			#size-cells = <0>;
545			pinctrl-names = "default";
546			pinctrl-0 = <&i2c3_hs_bus>;
547			clocks = <&clock_peri PERI_CLK_HSIC3>;
548			clock-names = "hsi2c";
549			status = "disabled";
550		};
551	};
552};
553
554#include "exynos5260-pinctrl.dtsi"
555