xref: /linux/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi (revision 4b911a9690d72641879ea6d13cce1de31d346d79)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
5 */
6
7/ {
8	aliases {
9		ethernet0 = &gmac;
10		mmc0 = &emmc;
11		mmc1 = &sdio;
12		mmc2 = &sdmmc;
13	};
14
15	chosen {
16		stdout-path = "serial2:1500000n8";
17	};
18
19	vcc5v0_sys: regulator-vcc5v0-sys {
20		compatible = "regulator-fixed";
21		regulator-name = "vcc5v0_sys";
22		regulator-always-on;
23		regulator-boot-on;
24		regulator-min-microvolt = <5000000>;
25		regulator-max-microvolt = <5000000>;
26	};
27
28	sdio_pwrseq: pwrseq-sdio {
29		compatible = "mmc-pwrseq-simple";
30		clocks = <&rk809 1>;
31		clock-names = "ext_clock";
32		pinctrl-names = "default";
33		pinctrl-0 = <&wifi_enable_h>;
34		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
35	};
36};
37
38&emmc {
39	bus-width = <8>;
40	cap-mmc-highspeed;
41	mmc-hs200-1_8v;
42	non-removable;
43	pinctrl-names = "default";
44	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
45	rockchip,default-sample-phase = <90>;
46	vmmc-supply = <&vcc_3v3>;
47	vqmmc-supply = <&vcc_1v8>;
48	status = "okay";
49};
50
51&i2c0 {
52	clock-frequency = <400000>;
53	status = "okay";
54
55	rk809: pmic@20 {
56		compatible = "rockchip,rk809";
57		reg = <0x20>;
58		interrupt-parent = <&gpio0>;
59		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
60		#clock-cells = <1>;
61		clock-output-names = "rk808-clkout1", "rk808-clkout2";
62		pinctrl-names = "default";
63		pinctrl-0 = <&pmic_int_l>;
64		rockchip,system-power-controller;
65		wakeup-source;
66
67		vcc1-supply = <&vcc5v0_sys>;
68		vcc2-supply = <&vcc5v0_sys>;
69		vcc3-supply = <&vcc5v0_sys>;
70		vcc4-supply = <&vcc5v0_sys>;
71		vcc5-supply = <&vcc_buck5>;
72		vcc6-supply = <&vcc_buck5>;
73		vcc7-supply = <&vcc5v0_sys>;
74		vcc8-supply = <&vcc3v3_sys>;
75		vcc9-supply = <&vcc5v0_sys>;
76
77		regulators {
78			vdd_npu_vepu: DCDC_REG1 {
79				regulator-name = "vdd_npu_vepu";
80				regulator-always-on;
81				regulator-boot-on;
82				regulator-initial-mode = <0x2>;
83				regulator-min-microvolt = <650000>;
84				regulator-max-microvolt = <950000>;
85				regulator-ramp-delay = <6001>;
86				regulator-state-mem {
87					regulator-off-in-suspend;
88				};
89			};
90
91			vdd_arm: DCDC_REG2 {
92				regulator-name = "vdd_arm";
93				regulator-always-on;
94				regulator-boot-on;
95				regulator-initial-mode = <0x2>;
96				regulator-min-microvolt = <725000>;
97				regulator-max-microvolt = <1350000>;
98				regulator-ramp-delay = <6001>;
99				regulator-state-mem {
100					regulator-off-in-suspend;
101				};
102			};
103
104			vcc_ddr: DCDC_REG3 {
105				regulator-name = "vcc_ddr";
106				regulator-always-on;
107				regulator-boot-on;
108				regulator-initial-mode = <0x2>;
109				regulator-state-mem {
110					regulator-on-in-suspend;
111				};
112			};
113
114			vcc3v3_sys: DCDC_REG4 {
115				regulator-name = "vcc3v3_sys";
116				regulator-always-on;
117				regulator-boot-on;
118				regulator-initial-mode = <0x2>;
119				regulator-min-microvolt = <3300000>;
120				regulator-max-microvolt = <3300000>;
121				regulator-state-mem {
122					regulator-on-in-suspend;
123					regulator-suspend-microvolt = <3300000>;
124				};
125			};
126
127			vcc_buck5: DCDC_REG5 {
128				regulator-name = "vcc_buck5";
129				regulator-always-on;
130				regulator-boot-on;
131				regulator-min-microvolt = <2200000>;
132				regulator-max-microvolt = <2200000>;
133				regulator-state-mem {
134					regulator-on-in-suspend;
135					regulator-suspend-microvolt = <2200000>;
136				};
137			};
138
139			vcc_0v8: LDO_REG1 {
140				regulator-name = "vcc_0v8";
141				regulator-always-on;
142				regulator-boot-on;
143				regulator-min-microvolt = <800000>;
144				regulator-max-microvolt = <800000>;
145				regulator-state-mem {
146					regulator-off-in-suspend;
147				};
148			};
149
150			vcc1v8_pmu: LDO_REG2 {
151				regulator-name = "vcc1v8_pmu";
152				regulator-always-on;
153				regulator-boot-on;
154				regulator-min-microvolt = <1800000>;
155				regulator-max-microvolt = <1800000>;
156				regulator-state-mem {
157					regulator-on-in-suspend;
158					regulator-suspend-microvolt = <1800000>;
159				};
160			};
161
162			vdd0v8_pmu: LDO_REG3 {
163				regulator-name = "vcc0v8_pmu";
164				regulator-always-on;
165				regulator-boot-on;
166				regulator-min-microvolt = <800000>;
167				regulator-max-microvolt = <800000>;
168				regulator-state-mem {
169					regulator-on-in-suspend;
170					regulator-suspend-microvolt = <800000>;
171				};
172			};
173
174			vcc_1v8: LDO_REG4 {
175				regulator-name = "vcc_1v8";
176				regulator-always-on;
177				regulator-boot-on;
178				regulator-min-microvolt = <1800000>;
179				regulator-max-microvolt = <1800000>;
180				regulator-state-mem {
181					regulator-on-in-suspend;
182					regulator-suspend-microvolt = <1800000>;
183				};
184			};
185
186			vcc_dovdd: LDO_REG5 {
187				regulator-name = "vcc_dovdd";
188				regulator-always-on;
189				regulator-boot-on;
190				regulator-min-microvolt = <1800000>;
191				regulator-max-microvolt = <1800000>;
192				regulator-state-mem {
193					regulator-off-in-suspend;
194				};
195			};
196
197			vcc_dvdd: LDO_REG6 {
198				regulator-name = "vcc_dvdd";
199				regulator-min-microvolt = <1200000>;
200				regulator-max-microvolt = <1200000>;
201				regulator-state-mem {
202					regulator-off-in-suspend;
203				};
204			};
205
206			vcc_avdd: LDO_REG7 {
207				regulator-name = "vcc_avdd";
208				regulator-min-microvolt = <2800000>;
209				regulator-max-microvolt = <2800000>;
210				regulator-state-mem {
211					regulator-off-in-suspend;
212				};
213			};
214
215			vccio_sd: LDO_REG8 {
216				regulator-name = "vccio_sd";
217				regulator-always-on;
218				regulator-boot-on;
219				regulator-min-microvolt = <1800000>;
220				regulator-max-microvolt = <3300000>;
221				regulator-state-mem {
222					regulator-off-in-suspend;
223				};
224			};
225
226			vcc3v3_sd: LDO_REG9 {
227				regulator-name = "vcc3v3_sd";
228				regulator-always-on;
229				regulator-boot-on;
230				regulator-min-microvolt = <3300000>;
231				regulator-max-microvolt = <3300000>;
232				regulator-state-mem {
233					regulator-off-in-suspend;
234				};
235			};
236
237			vcc_5v0: SWITCH_REG1 {
238				regulator-name = "vcc_5v0";
239			};
240
241			vcc_3v3: SWITCH_REG2 {
242				regulator-name = "vcc_3v3";
243				regulator-always-on;
244				regulator-boot-on;
245			};
246		};
247	};
248};
249
250&i2c2 {
251	status = "okay";
252	clock-frequency = <400000>;
253
254	pcf8563: rtc@51 {
255		compatible = "nxp,pcf8563";
256		reg = <0x51>;
257		#clock-cells = <0>;
258		interrupt-parent = <&gpio0>;
259		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
260		clock-output-names = "xin32k";
261	};
262};
263
264&gmac {
265	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
266			  <&cru CLK_GMAC_TX_RX>;
267	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
268				 <&cru RMII_MODE_CLK>;
269	assigned-clock-rates = <0>, <50000000>;
270	clock_in_out = "output";
271	phy-handle = <&phy>;
272	phy-mode = "rmii";
273	phy-supply = <&vcc_3v3>;
274	pinctrl-names = "default";
275	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
276	status = "okay";
277};
278
279&mdio {
280	phy: ethernet-phy@0 {
281		compatible = "ethernet-phy-ieee802.3-c22";
282		reg = <0x0>;
283		pinctrl-names = "default";
284		pinctrl-0 = <&eth_phy_rst>;
285		reset-active-low;
286		reset-assert-us = <50000>;
287		reset-deassert-us = <10000>;
288		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
289	};
290};
291
292&pinctrl {
293	ethernet {
294		eth_phy_rst: eth-phy-rst {
295			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
296		};
297	};
298	bt {
299		bt_enable: bt-enable {
300			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
301		};
302
303		bt_wake_dev: bt-wake-dev {
304			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
305		};
306
307		bt_wake_host: bt-wake-host {
308			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
309		};
310	};
311
312	pmic {
313		pmic_int_l: pmic-int-l {
314			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
315		};
316	};
317
318	wifi {
319		wifi_enable_h: wifi-enable-h {
320			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
321		};
322	};
323};
324
325&pmu_io_domains {
326	pmuio0-supply = <&vcc1v8_pmu>;
327	pmuio1-supply = <&vcc3v3_sys>;
328	vccio1-supply = <&vcc_1v8>;
329	vccio2-supply = <&vccio_sd>;
330	vccio3-supply = <&vcc3v3_sd>;
331	vccio4-supply = <&vcc_dovdd>;
332	vccio5-supply = <&vcc_1v8>;
333	vccio6-supply = <&vcc_1v8>;
334	vccio7-supply = <&vcc_dovdd>;
335	status = "okay";
336};
337
338&saradc {
339	vref-supply = <&vcc_1v8>;
340	status = "okay";
341};
342
343&sdio {
344	bus-width = <4>;
345	cap-sd-highspeed;
346	cap-sdio-irq;
347	keep-power-in-suspend;
348	max-frequency = <50000000>;
349	mmc-pwrseq = <&sdio_pwrseq>;
350	non-removable;
351	pinctrl-names = "default";
352	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
353	rockchip,default-sample-phase = <90>;
354	sd-uhs-sdr50;
355	vmmc-supply = <&vcc3v3_sd>;
356	vqmmc-supply = <&vcc_1v8>;
357	status = "okay";
358};
359
360&sdmmc {
361	bus-width = <4>;
362	cap-mmc-highspeed;
363	cap-sd-highspeed;
364	card-detect-delay = <200>;
365	pinctrl-names = "default";
366	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
367	rockchip,default-sample-phase = <90>;
368	sd-uhs-sdr12;
369	sd-uhs-sdr25;
370	sd-uhs-sdr104;
371	vqmmc-supply = <&vccio_sd>;
372	status = "okay";
373};
374
375&uart0 {
376	pinctrl-names = "default";
377	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
378	uart-has-rtscts;
379	status = "okay";
380
381	bluetooth {
382		compatible = "realtek,rtl8723ds-bt";
383		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
384		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
385		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
386		max-speed = <2000000>;
387		pinctrl-names = "default";
388		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
389	};
390};
391
392&uart2 {
393	status = "okay";
394};
395
396&uart3 {
397	pinctrl-names = "default";
398	pinctrl-0 = <&uart3m2_xfer>;
399	status = "okay";
400};
401
402&uart4 {
403	pinctrl-names = "default";
404	pinctrl-0 = <&uart4m2_xfer>;
405	status = "okay";
406};
407