xref: /linux/arch/arm/boot/dts/rockchip/rk3xxx.dtsi (revision bf36793fa260cb68cc817f311f1f683788261796)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2013 MundoReader S.L.
4 * Author: Heiko Stuebner <heiko@sntech.de>
5 */
6
7#include <dt-bindings/interrupt-controller/irq.h>
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9#include <dt-bindings/soc/rockchip,boot-mode.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14
15	interrupt-parent = <&gic>;
16
17	aliases {
18		ethernet0 = &emac;
19		gpio0 = &gpio0;
20		gpio1 = &gpio1;
21		gpio2 = &gpio2;
22		gpio3 = &gpio3;
23		i2c0 = &i2c0;
24		i2c1 = &i2c1;
25		i2c2 = &i2c2;
26		i2c3 = &i2c3;
27		i2c4 = &i2c4;
28		serial0 = &uart0;
29		serial1 = &uart1;
30		serial2 = &uart2;
31		serial3 = &uart3;
32		spi0 = &spi0;
33		spi1 = &spi1;
34	};
35
36	xin24m: oscillator {
37		compatible = "fixed-clock";
38		clock-frequency = <24000000>;
39		#clock-cells = <0>;
40		clock-output-names = "xin24m";
41	};
42
43	gpu: gpu@10090000 {
44		compatible = "arm,mali-400";
45		reg = <0x10090000 0x10000>;
46		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
47		clock-names = "bus", "core";
48		assigned-clocks = <&cru ACLK_GPU>;
49		assigned-clock-rates = <100000000>;
50		resets = <&cru SRST_GPU>;
51		status = "disabled";
52	};
53
54	vpu: video-codec@10104000 {
55		compatible = "rockchip,rk3066-vpu";
56		reg = <0x10104000 0x800>;
57		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
58			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
59		interrupt-names = "vepu", "vdpu";
60		clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
61			 <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
62		clock-names = "aclk_vdpu", "hclk_vdpu",
63			      "aclk_vepu", "hclk_vepu";
64	};
65
66	L2: cache-controller@10138000 {
67		compatible = "arm,pl310-cache";
68		reg = <0x10138000 0x1000>;
69		cache-unified;
70		cache-level = <2>;
71	};
72
73	scu@1013c000 {
74		compatible = "arm,cortex-a9-scu";
75		reg = <0x1013c000 0x100>;
76	};
77
78	global_timer: global-timer@1013c200 {
79		compatible = "arm,cortex-a9-global-timer";
80		reg = <0x1013c200 0x20>;
81		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
82		clocks = <&cru CORE_PERI>;
83		status = "disabled";
84		/* The clock source and the sched_clock provided by the arm_global_timer
85		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
86		 * depend on the CPU frequency.
87		 * Keep the arm_global_timer disabled in order to have the
88		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
89		 */
90	};
91
92	local_timer: local-timer@1013c600 {
93		compatible = "arm,cortex-a9-twd-timer";
94		reg = <0x1013c600 0x20>;
95		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
96		clocks = <&cru CORE_PERI>;
97	};
98
99	gic: interrupt-controller@1013d000 {
100		compatible = "arm,cortex-a9-gic";
101		interrupt-controller;
102		#interrupt-cells = <3>;
103		reg = <0x1013d000 0x1000>,
104		      <0x1013c100 0x0100>;
105	};
106
107	uart0: serial@10124000 {
108		compatible = "snps,dw-apb-uart";
109		reg = <0x10124000 0x400>;
110		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
111		reg-shift = <2>;
112		reg-io-width = <1>;
113		clock-names = "baudclk", "apb_pclk";
114		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
115		status = "disabled";
116	};
117
118	uart1: serial@10126000 {
119		compatible = "snps,dw-apb-uart";
120		reg = <0x10126000 0x400>;
121		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
122		reg-shift = <2>;
123		reg-io-width = <1>;
124		clock-names = "baudclk", "apb_pclk";
125		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
126		status = "disabled";
127	};
128
129	qos_gpu: qos@1012d000 {
130		compatible = "rockchip,rk3066-qos", "syscon";
131		reg = <0x1012d000 0x20>;
132	};
133
134	qos_vpu: qos@1012e000 {
135		compatible = "rockchip,rk3066-qos", "syscon";
136		reg = <0x1012e000 0x20>;
137	};
138
139	qos_lcdc0: qos@1012f000 {
140		compatible = "rockchip,rk3066-qos", "syscon";
141		reg = <0x1012f000 0x20>;
142	};
143
144	qos_cif0: qos@1012f080 {
145		compatible = "rockchip,rk3066-qos", "syscon";
146		reg = <0x1012f080 0x20>;
147	};
148
149	qos_ipp: qos@1012f100 {
150		compatible = "rockchip,rk3066-qos", "syscon";
151		reg = <0x1012f100 0x20>;
152	};
153
154	qos_lcdc1: qos@1012f180 {
155		compatible = "rockchip,rk3066-qos", "syscon";
156		reg = <0x1012f180 0x20>;
157	};
158
159	qos_cif1: qos@1012f200 {
160		compatible = "rockchip,rk3066-qos", "syscon";
161		reg = <0x1012f200 0x20>;
162	};
163
164	qos_rga: qos@1012f280 {
165		compatible = "rockchip,rk3066-qos", "syscon";
166		reg = <0x1012f280 0x20>;
167	};
168
169	usb_otg: usb@10180000 {
170		compatible = "rockchip,rk3066-usb", "snps,dwc2";
171		reg = <0x10180000 0x40000>;
172		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
173		clocks = <&cru HCLK_OTG0>;
174		clock-names = "otg";
175		dr_mode = "otg";
176		g-np-tx-fifo-size = <16>;
177		g-rx-fifo-size = <275>;
178		g-tx-fifo-size = <256 128 128 64 64 32>;
179		phys = <&usbphy0>;
180		phy-names = "usb2-phy";
181		status = "disabled";
182	};
183
184	usb_host: usb@101c0000 {
185		compatible = "snps,dwc2";
186		reg = <0x101c0000 0x40000>;
187		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
188		clocks = <&cru HCLK_OTG1>;
189		clock-names = "otg";
190		dr_mode = "host";
191		phys = <&usbphy1>;
192		phy-names = "usb2-phy";
193		status = "disabled";
194	};
195
196	emac: ethernet@10204000 {
197		compatible = "rockchip,rk3066-emac";
198		reg = <0x10204000 0x3c>;
199		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
200		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
201		clock-names = "hclk", "macref";
202		max-speed = <100>;
203		phy-mode = "rmii";
204		rockchip,grf = <&grf>;
205		status = "disabled";
206	};
207
208	mmc0: mmc@10214000 {
209		compatible = "rockchip,rk2928-dw-mshc";
210		reg = <0x10214000 0x1000>;
211		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
212		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
213		clock-names = "biu", "ciu";
214		dmas = <&dmac2 1>;
215		dma-names = "rx-tx";
216		fifo-depth = <256>;
217		resets = <&cru SRST_SDMMC>;
218		reset-names = "reset";
219		status = "disabled";
220	};
221
222	mmc1: mmc@10218000 {
223		compatible = "rockchip,rk2928-dw-mshc";
224		reg = <0x10218000 0x1000>;
225		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
226		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
227		clock-names = "biu", "ciu";
228		dmas = <&dmac2 3>;
229		dma-names = "rx-tx";
230		fifo-depth = <256>;
231		resets = <&cru SRST_SDIO>;
232		reset-names = "reset";
233		status = "disabled";
234	};
235
236	emmc: mmc@1021c000 {
237		compatible = "rockchip,rk2928-dw-mshc";
238		reg = <0x1021c000 0x1000>;
239		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
240		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
241		clock-names = "biu", "ciu";
242		dmas = <&dmac2 4>;
243		dma-names = "rx-tx";
244		fifo-depth = <256>;
245		resets = <&cru SRST_EMMC>;
246		reset-names = "reset";
247		status = "disabled";
248	};
249
250	nfc: nand-controller@10500000 {
251		compatible = "rockchip,rk2928-nfc";
252		reg = <0x10500000 0x4000>;
253		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
254		clocks = <&cru HCLK_NANDC0>;
255		clock-names = "ahb";
256		status = "disabled";
257	};
258
259	pmu: pmu@20004000 {
260		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
261		reg = <0x20004000 0x100>;
262
263		reboot-mode {
264			compatible = "syscon-reboot-mode";
265			offset = <0x40>;
266			mode-normal = <BOOT_NORMAL>;
267			mode-recovery = <BOOT_RECOVERY>;
268			mode-bootloader = <BOOT_FASTBOOT>;
269			mode-loader = <BOOT_BL_DOWNLOAD>;
270		};
271	};
272
273	grf: grf@20008000 {
274		compatible = "syscon", "simple-mfd";
275		reg = <0x20008000 0x200>;
276	};
277
278	dmac1_s: dma-controller@20018000 {
279		compatible = "arm,pl330", "arm,primecell";
280		reg = <0x20018000 0x4000>;
281		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
282			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
283		#dma-cells = <1>;
284		arm,pl330-broken-no-flushp;
285		arm,pl330-periph-burst;
286		clocks = <&cru ACLK_DMA1>;
287		clock-names = "apb_pclk";
288	};
289
290	dmac1_ns: dma-controller@2001c000 {
291		compatible = "arm,pl330", "arm,primecell";
292		reg = <0x2001c000 0x4000>;
293		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
294			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
295		#dma-cells = <1>;
296		arm,pl330-broken-no-flushp;
297		arm,pl330-periph-burst;
298		clocks = <&cru ACLK_DMA1>;
299		clock-names = "apb_pclk";
300		status = "disabled";
301	};
302
303	i2c0: i2c@2002d000 {
304		compatible = "rockchip,rk3066-i2c";
305		reg = <0x2002d000 0x1000>;
306		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
307		#address-cells = <1>;
308		#size-cells = <0>;
309
310		rockchip,grf = <&grf>;
311
312		clock-names = "i2c";
313		clocks = <&cru PCLK_I2C0>;
314
315		status = "disabled";
316	};
317
318	i2c1: i2c@2002f000 {
319		compatible = "rockchip,rk3066-i2c";
320		reg = <0x2002f000 0x1000>;
321		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
322		#address-cells = <1>;
323		#size-cells = <0>;
324
325		rockchip,grf = <&grf>;
326
327		clocks = <&cru PCLK_I2C1>;
328		clock-names = "i2c";
329
330		status = "disabled";
331	};
332
333	pwm0: pwm@20030000 {
334		compatible = "rockchip,rk2928-pwm";
335		reg = <0x20030000 0x10>;
336		#pwm-cells = <2>;
337		clocks = <&cru PCLK_PWM01>;
338		status = "disabled";
339	};
340
341	pwm1: pwm@20030010 {
342		compatible = "rockchip,rk2928-pwm";
343		reg = <0x20030010 0x10>;
344		#pwm-cells = <2>;
345		clocks = <&cru PCLK_PWM01>;
346		status = "disabled";
347	};
348
349	wdt: watchdog@2004c000 {
350		compatible = "snps,dw-wdt";
351		reg = <0x2004c000 0x100>;
352		clocks = <&cru PCLK_WDT>;
353		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
354		status = "disabled";
355	};
356
357	pwm2: pwm@20050020 {
358		compatible = "rockchip,rk2928-pwm";
359		reg = <0x20050020 0x10>;
360		#pwm-cells = <2>;
361		clocks = <&cru PCLK_PWM23>;
362		status = "disabled";
363	};
364
365	pwm3: pwm@20050030 {
366		compatible = "rockchip,rk2928-pwm";
367		reg = <0x20050030 0x10>;
368		#pwm-cells = <2>;
369		clocks = <&cru PCLK_PWM23>;
370		status = "disabled";
371	};
372
373	i2c2: i2c@20056000 {
374		compatible = "rockchip,rk3066-i2c";
375		reg = <0x20056000 0x1000>;
376		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
377		#address-cells = <1>;
378		#size-cells = <0>;
379
380		rockchip,grf = <&grf>;
381
382		clocks = <&cru PCLK_I2C2>;
383		clock-names = "i2c";
384
385		status = "disabled";
386	};
387
388	i2c3: i2c@2005a000 {
389		compatible = "rockchip,rk3066-i2c";
390		reg = <0x2005a000 0x1000>;
391		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
392		#address-cells = <1>;
393		#size-cells = <0>;
394
395		rockchip,grf = <&grf>;
396
397		clocks = <&cru PCLK_I2C3>;
398		clock-names = "i2c";
399
400		status = "disabled";
401	};
402
403	i2c4: i2c@2005e000 {
404		compatible = "rockchip,rk3066-i2c";
405		reg = <0x2005e000 0x1000>;
406		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
407		#address-cells = <1>;
408		#size-cells = <0>;
409
410		rockchip,grf = <&grf>;
411
412		clocks = <&cru PCLK_I2C4>;
413		clock-names = "i2c";
414
415		status = "disabled";
416	};
417
418	uart2: serial@20064000 {
419		compatible = "snps,dw-apb-uart";
420		reg = <0x20064000 0x400>;
421		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
422		reg-shift = <2>;
423		reg-io-width = <1>;
424		clock-names = "baudclk", "apb_pclk";
425		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
426		status = "disabled";
427	};
428
429	uart3: serial@20068000 {
430		compatible = "snps,dw-apb-uart";
431		reg = <0x20068000 0x400>;
432		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
433		reg-shift = <2>;
434		reg-io-width = <1>;
435		clock-names = "baudclk", "apb_pclk";
436		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
437		status = "disabled";
438	};
439
440	saradc: saradc@2006c000 {
441		compatible = "rockchip,saradc";
442		reg = <0x2006c000 0x100>;
443		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
444		#io-channel-cells = <1>;
445		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
446		clock-names = "saradc", "apb_pclk";
447		resets = <&cru SRST_SARADC>;
448		reset-names = "saradc-apb";
449		status = "disabled";
450	};
451
452	spi0: spi@20070000 {
453		compatible = "rockchip,rk3066-spi";
454		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
455		clock-names = "spiclk", "apb_pclk";
456		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
457		reg = <0x20070000 0x1000>;
458		#address-cells = <1>;
459		#size-cells = <0>;
460		dmas = <&dmac2 10>, <&dmac2 11>;
461		dma-names = "tx", "rx";
462		status = "disabled";
463	};
464
465	spi1: spi@20074000 {
466		compatible = "rockchip,rk3066-spi";
467		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
468		clock-names = "spiclk", "apb_pclk";
469		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
470		reg = <0x20074000 0x1000>;
471		#address-cells = <1>;
472		#size-cells = <0>;
473		dmas = <&dmac2 12>, <&dmac2 13>;
474		dma-names = "tx", "rx";
475		status = "disabled";
476	};
477
478	dmac2: dma-controller@20078000 {
479		compatible = "arm,pl330", "arm,primecell";
480		reg = <0x20078000 0x4000>;
481		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
482			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
483		#dma-cells = <1>;
484		arm,pl330-broken-no-flushp;
485		arm,pl330-periph-burst;
486		clocks = <&cru ACLK_DMA2>;
487		clock-names = "apb_pclk";
488	};
489};
490