xref: /linux/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts (revision 26bda0dff9ca74ae071643e0176f248d72f43580)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include "rk3188.dtsi"
9
10/ {
11	model = "Radxa Rock";
12	compatible = "radxa,rock", "rockchip,rk3188";
13
14	aliases {
15		mmc0 = &mmc0;
16	};
17
18	memory@60000000 {
19		device_type = "memory";
20		reg = <0x60000000 0x80000000>;
21	};
22
23	gpio-keys {
24		compatible = "gpio-keys";
25		autorepeat;
26
27		key-power {
28			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
29			linux,code = <KEY_POWER>;
30			label = "GPIO Key Power";
31			linux,input-type = <1>;
32			wakeup-source;
33			debounce-interval = <100>;
34		};
35	};
36
37	gpio-leds {
38		compatible = "gpio-leds";
39
40		green_led: led-0 {
41			label = "rock:green:user1";
42			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
43			default-state = "off";
44		};
45
46		blue_led: led-1 {
47			label = "rock:blue:user2";
48			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
49			default-state = "off";
50		};
51
52		sleep_led: led-2 {
53			label = "rock:red:power";
54			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
55			default-state = "off";
56		};
57	};
58
59	sound {
60		compatible = "simple-audio-card";
61		simple-audio-card,name = "SPDIF";
62
63		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
64			cpu { sound-dai = <&spdif>; };
65			codec { sound-dai = <&spdif_out>; };
66		};
67	};
68
69	spdif_out: spdif-out {
70		compatible = "linux,spdif-dit";
71		#sound-dai-cells = <0>;
72	};
73
74	ir_recv: ir-receiver {
75		compatible = "gpio-ir-receiver";
76		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
77		pinctrl-names = "default";
78		pinctrl-0 = <&ir_recv_pin>;
79	};
80
81	vcc_otg: regulator-usb-otg {
82		compatible = "regulator-fixed";
83		enable-active-high;
84		gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
85		pinctrl-names = "default";
86		pinctrl-0 = <&otg_vbus_drv>;
87		regulator-name = "otg-vbus";
88		regulator-min-microvolt = <5000000>;
89		regulator-max-microvolt = <5000000>;
90		regulator-always-on;
91		regulator-boot-on;
92	};
93
94	vcc_sd0: regulator-sdmmc {
95		compatible = "regulator-fixed";
96		regulator-name = "sdmmc-supply";
97		regulator-min-microvolt = <3300000>;
98		regulator-max-microvolt = <3300000>;
99		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
100		pinctrl-names = "default";
101		pinctrl-0 = <&sdmmc_pwr>;
102		startup-delay-us = <100000>;
103		vin-supply = <&vcc_io>;
104	};
105
106	vcc_host: regulator-usb-host {
107		compatible = "regulator-fixed";
108		enable-active-high;
109		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
110		pinctrl-names = "default";
111		pinctrl-0 = <&host_vbus_drv>;
112		regulator-name = "host-pwr";
113		regulator-min-microvolt = <5000000>;
114		regulator-max-microvolt = <5000000>;
115		regulator-always-on;
116		regulator-boot-on;
117	};
118
119	vsys: regulator-vsys {
120		compatible = "regulator-fixed";
121		regulator-name = "vsys";
122		regulator-min-microvolt = <5000000>;
123		regulator-max-microvolt = <5000000>;
124		regulator-boot-on;
125	};
126};
127
128&emac {
129	phy = <&phy0>;
130	phy-supply = <&vcc_rmii>;
131	pinctrl-names = "default";
132	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
133	status = "okay";
134
135	mdio {
136		#address-cells = <1>;
137		#size-cells = <0>;
138
139		phy0: ethernet-phy@0 {
140			reg = <0>;
141			interrupt-parent = <&gpio3>;
142			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
143		};
144	};
145};
146
147&cpu0 {
148	cpu-supply = <&vdd_arm>;
149};
150
151&cpu1 {
152	cpu-supply = <&vdd_arm>;
153};
154
155&cpu2 {
156	cpu-supply = <&vdd_arm>;
157};
158
159&cpu3 {
160	cpu-supply = <&vdd_arm>;
161};
162
163&gpu {
164	status = "okay";
165};
166
167&i2c1 {
168	status = "okay";
169	clock-frequency = <400000>;
170
171	rtc@51 {
172		compatible = "haoyu,hym8563";
173		reg = <0x51>;
174		interrupt-parent = <&gpio0>;
175		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
176		pinctrl-names = "default";
177		pinctrl-0 = <&rtc_int>;
178		#clock-cells = <0>;
179		clock-output-names = "xin32k";
180	};
181
182	act8846: act8846@5a {
183		compatible = "active-semi,act8846";
184		reg = <0x5a>;
185		status = "okay";
186		system-power-controller;
187
188		pinctrl-names = "default";
189		pinctrl-0 = <&act8846_dvs0_ctl>;
190
191		vp1-supply = <&vsys>;
192		vp2-supply = <&vsys>;
193		vp3-supply = <&vsys>;
194		vp4-supply = <&vsys>;
195		inl1-supply = <&vcc_io>;
196		inl2-supply = <&vsys>;
197		inl3-supply = <&vsys>;
198
199		regulators {
200			vcc_ddr: REG1 {
201				regulator-name = "VCC_DDR";
202				regulator-min-microvolt = <1200000>;
203				regulator-max-microvolt = <1200000>;
204				regulator-always-on;
205			};
206
207			vdd_log: REG2 {
208				regulator-name = "VDD_LOG";
209				regulator-min-microvolt = <1000000>;
210				regulator-max-microvolt = <1000000>;
211				regulator-always-on;
212			};
213
214			vdd_arm: REG3 {
215				regulator-name = "VDD_ARM";
216				regulator-min-microvolt = <875000>;
217				regulator-max-microvolt = <1350000>;
218				regulator-always-on;
219			};
220
221			vcc_io: REG4 {
222				regulator-name = "VCC_IO";
223				regulator-min-microvolt = <3300000>;
224				regulator-max-microvolt = <3300000>;
225				regulator-always-on;
226			};
227
228			vdd_10: REG5 {
229				regulator-name = "VDD_10";
230				regulator-min-microvolt = <1000000>;
231				regulator-max-microvolt = <1000000>;
232				regulator-always-on;
233			};
234
235			vdd_hdmi: REG6 {
236				regulator-name = "VDD_HDMI";
237				regulator-min-microvolt = <2500000>;
238				regulator-max-microvolt = <2500000>;
239				regulator-always-on;
240			};
241
242			vcc18: REG7 {
243				regulator-name = "VCC_18";
244				regulator-min-microvolt = <1800000>;
245				regulator-max-microvolt = <1800000>;
246				regulator-always-on;
247			};
248
249			vcca_33: REG8 {
250				regulator-name = "VCCA_33";
251				regulator-min-microvolt = <3300000>;
252				regulator-max-microvolt = <3300000>;
253				regulator-always-on;
254			};
255
256			vcc_rmii: REG9 {
257				regulator-name = "VCC_RMII";
258				regulator-min-microvolt = <3300000>;
259				regulator-max-microvolt = <3300000>;
260			};
261
262			vccio_wl: REG10 {
263				regulator-name = "VCCIO_WL";
264				regulator-min-microvolt = <3300000>;
265				regulator-max-microvolt = <3300000>;
266				regulator-always-on;
267			};
268
269			vcc_18: REG11 {
270				regulator-name = "VCC18_IO";
271				regulator-min-microvolt = <1800000>;
272				regulator-max-microvolt = <1800000>;
273				regulator-always-on;
274			};
275
276			vcc28: REG12 {
277				regulator-name = "VCC_28";
278				regulator-min-microvolt = <2800000>;
279				regulator-max-microvolt = <2800000>;
280				regulator-always-on;
281			};
282		};
283	};
284};
285
286&mmc0 {
287	status = "okay";
288	pinctrl-names = "default";
289	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
290	vmmc-supply = <&vcc_sd0>;
291
292	bus-width = <4>;
293	cap-mmc-highspeed;
294	cap-sd-highspeed;
295	disable-wp;
296};
297
298&pwm1 {
299	status = "okay";
300};
301
302&pwm2 {
303	status = "okay";
304};
305
306&pwm3 {
307	status = "okay";
308};
309
310&pinctrl {
311	pcfg_output_low: pcfg-output-low {
312		output-low;
313	};
314
315	act8846 {
316		act8846_dvs0_ctl: act8846-dvs0-ctl {
317			rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
318		};
319	};
320
321	hym8563 {
322		rtc_int: rtc-int {
323			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
324		};
325	};
326
327	lan8720a  {
328		phy_int: phy-int {
329			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
330		};
331	};
332
333	ir-receiver {
334		ir_recv_pin: ir-recv-pin {
335			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
336		};
337	};
338
339	sd0 {
340		sdmmc_pwr: sdmmc-pwr {
341			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
342		};
343	};
344
345	usb {
346		host_vbus_drv: host-vbus-drv {
347			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
348		};
349		otg_vbus_drv: otg-vbus-drv {
350			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
351		};
352	};
353};
354
355&spdif {
356	status = "okay";
357};
358
359&uart0 {
360	status = "okay";
361};
362
363&uart1 {
364	status = "okay";
365};
366
367&uart2 {
368	status = "okay";
369};
370
371&uart3 {
372	status = "okay";
373};
374
375&usbphy {
376	status = "okay";
377};
378
379&usb_host {
380	status = "okay";
381};
382
383&usb_otg {
384	status = "okay";
385};
386
387&wdt {
388	status = "okay";
389};
390