xref: /linux/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts (revision 55d0969c451159cff86949b38c39171cab962069) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7791.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Koelsch";
45	compatible = "renesas,koelsch", "renesas,r8a7791";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scif1;
50		i2c9 = &gpioi2c1;
51		i2c10 = &gpioi2c2;
52		i2c11 = &gpioi2c4;
53		i2c12 = &i2cexio1;
54		i2c13 = &i2chdmi;
55		i2c14 = &i2cexio4;
56		mmc0 = &sdhi0;
57		mmc1 = &sdhi1;
58		mmc2 = &sdhi2;
59	};
60
61	chosen {
62		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
63		stdout-path = "serial0:115200n8";
64	};
65
66	memory@40000000 {
67		device_type = "memory";
68		reg = <0 0x40000000 0 0x40000000>;
69	};
70
71	memory@200000000 {
72		device_type = "memory";
73		reg = <2 0x00000000 0 0x40000000>;
74	};
75
76	keyboard {
77		compatible = "gpio-keys";
78
79		pinctrl-0 = <&keyboard_pins>;
80		pinctrl-names = "default";
81
82		key-1 {
83			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
84			linux,code = <KEY_1>;
85			label = "SW2-1";
86			wakeup-source;
87			debounce-interval = <20>;
88		};
89		key-2 {
90			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
91			linux,code = <KEY_2>;
92			label = "SW2-2";
93			wakeup-source;
94			debounce-interval = <20>;
95		};
96		key-3 {
97			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
98			linux,code = <KEY_3>;
99			label = "SW2-3";
100			wakeup-source;
101			debounce-interval = <20>;
102		};
103		key-4 {
104			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
105			linux,code = <KEY_4>;
106			label = "SW2-4";
107			wakeup-source;
108			debounce-interval = <20>;
109		};
110		key-a {
111			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
112			linux,code = <KEY_A>;
113			label = "SW30";
114			wakeup-source;
115			debounce-interval = <20>;
116		};
117		key-b {
118			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
119			linux,code = <KEY_B>;
120			label = "SW31";
121			wakeup-source;
122			debounce-interval = <20>;
123		};
124		key-c {
125			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
126			linux,code = <KEY_C>;
127			label = "SW32";
128			wakeup-source;
129			debounce-interval = <20>;
130		};
131		key-d {
132			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
133			linux,code = <KEY_D>;
134			label = "SW33";
135			wakeup-source;
136			debounce-interval = <20>;
137		};
138		key-e {
139			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
140			linux,code = <KEY_E>;
141			label = "SW34";
142			wakeup-source;
143			debounce-interval = <20>;
144		};
145		key-f {
146			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
147			linux,code = <KEY_F>;
148			label = "SW35";
149			wakeup-source;
150			debounce-interval = <20>;
151		};
152		key-g {
153			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
154			linux,code = <KEY_G>;
155			label = "SW36";
156			wakeup-source;
157			debounce-interval = <20>;
158		};
159	};
160
161	leds {
162		compatible = "gpio-leds";
163		led6 {
164			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
165			label = "LED6";
166		};
167		led7 {
168			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
169			label = "LED7";
170		};
171		led8 {
172			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
173			label = "LED8";
174		};
175	};
176
177	reg_1p8v: regulator-1v8 {
178		compatible = "regulator-fixed";
179		regulator-name = "fixed-1.8V";
180		regulator-min-microvolt = <1800000>;
181		regulator-max-microvolt = <1800000>;
182		regulator-boot-on;
183		regulator-always-on;
184	};
185
186	reg_3p3v: regulator-3v3 {
187		compatible = "regulator-fixed";
188		regulator-name = "fixed-3.3V";
189		regulator-min-microvolt = <3300000>;
190		regulator-max-microvolt = <3300000>;
191		regulator-boot-on;
192		regulator-always-on;
193	};
194
195	vcc_sdhi0: regulator-vcc-sdhi0 {
196		compatible = "regulator-fixed";
197
198		regulator-name = "SDHI0 Vcc";
199		regulator-min-microvolt = <3300000>;
200		regulator-max-microvolt = <3300000>;
201
202		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
203		enable-active-high;
204	};
205
206	vccq_sdhi0: regulator-vccq-sdhi0 {
207		compatible = "regulator-gpio";
208
209		regulator-name = "SDHI0 VccQ";
210		regulator-min-microvolt = <1800000>;
211		regulator-max-microvolt = <3300000>;
212
213		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
214		gpios-states = <1>;
215		states = <3300000 1>, <1800000 0>;
216	};
217
218	vcc_sdhi1: regulator-vcc-sdhi1 {
219		compatible = "regulator-fixed";
220
221		regulator-name = "SDHI1 Vcc";
222		regulator-min-microvolt = <3300000>;
223		regulator-max-microvolt = <3300000>;
224
225		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
226		enable-active-high;
227	};
228
229	vccq_sdhi1: regulator-vccq-sdhi1 {
230		compatible = "regulator-gpio";
231
232		regulator-name = "SDHI1 VccQ";
233		regulator-min-microvolt = <1800000>;
234		regulator-max-microvolt = <3300000>;
235
236		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
237		gpios-states = <1>;
238		states = <3300000 1>, <1800000 0>;
239	};
240
241	vcc_sdhi2: regulator-vcc-sdhi2 {
242		compatible = "regulator-fixed";
243
244		regulator-name = "SDHI2 Vcc";
245		regulator-min-microvolt = <3300000>;
246		regulator-max-microvolt = <3300000>;
247
248		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
249		enable-active-high;
250	};
251
252	vccq_sdhi2: regulator-vccq-sdhi2 {
253		compatible = "regulator-gpio";
254
255		regulator-name = "SDHI2 VccQ";
256		regulator-min-microvolt = <1800000>;
257		regulator-max-microvolt = <3300000>;
258
259		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
260		gpios-states = <1>;
261		states = <3300000 1>, <1800000 0>;
262	};
263
264	audio_clock: audio_clock {
265		compatible = "fixed-clock";
266		#clock-cells = <0>;
267		clock-frequency = <11289600>;
268	};
269
270	rsnd_ak4643: sound {
271		compatible = "simple-audio-card";
272
273		simple-audio-card,format = "left_j";
274		simple-audio-card,bitclock-master = <&sndcodec>;
275		simple-audio-card,frame-master = <&sndcodec>;
276
277		sndcpu: simple-audio-card,cpu {
278			sound-dai = <&rcar_sound>;
279		};
280
281		sndcodec: simple-audio-card,codec {
282			sound-dai = <&ak4643>;
283			clocks = <&audio_clock>;
284		};
285	};
286
287	hdmi-in {
288		compatible = "hdmi-connector";
289		type = "a";
290
291		port {
292			hdmi_con_in: endpoint {
293				remote-endpoint = <&adv7612_in>;
294			};
295		};
296	};
297
298	cec_clock: cec-clock {
299		compatible = "fixed-clock";
300		#clock-cells = <0>;
301		clock-frequency = <12000000>;
302	};
303
304	hdmi-out {
305		compatible = "hdmi-connector";
306		type = "a";
307
308		port {
309			hdmi_con_out: endpoint {
310				remote-endpoint = <&adv7511_out>;
311			};
312		};
313	};
314
315	x2_clk: x2-clock {
316		compatible = "fixed-clock";
317		#clock-cells = <0>;
318		clock-frequency = <74250000>;
319	};
320
321	x13_clk: x13-clock {
322		compatible = "fixed-clock";
323		#clock-cells = <0>;
324		clock-frequency = <148500000>;
325	};
326
327	gpioi2c1: i2c-9 {
328		#address-cells = <1>;
329		#size-cells = <0>;
330		compatible = "i2c-gpio";
331		status = "disabled";
332		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
333		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
334		i2c-gpio,delay-us = <5>;
335	};
336
337	gpioi2c2: i2c-10 {
338		#address-cells = <1>;
339		#size-cells = <0>;
340		compatible = "i2c-gpio";
341		status = "disabled";
342		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
343		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
344		i2c-gpio,delay-us = <5>;
345	};
346
347	gpioi2c4: i2c-11 {
348		#address-cells = <1>;
349		#size-cells = <0>;
350		compatible = "i2c-gpio";
351		status = "disabled";
352		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
353		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
354		i2c-gpio,delay-us = <5>;
355	};
356
357	/*
358	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
359	 * A fallback to GPIO is provided.
360	 */
361	i2cexio1: i2c-mux1 {
362		compatible = "i2c-demux-pinctrl";
363		i2c-parent = <&i2c1>, <&gpioi2c1>;
364		i2c-bus-name = "i2c-exio1";
365		#address-cells = <1>;
366		#size-cells = <0>;
367	};
368
369	/*
370	 * A fallback to GPIO is provided for I2C2.
371	 */
372	i2chdmi: i2c-mux2 {
373		compatible = "i2c-demux-pinctrl";
374		i2c-parent = <&i2c2>, <&gpioi2c2>;
375		i2c-bus-name = "i2c-hdmi";
376		#address-cells = <1>;
377		#size-cells = <0>;
378
379		ak4643: codec@12 {
380			compatible = "asahi-kasei,ak4643";
381			#sound-dai-cells = <0>;
382			reg = <0x12>;
383		};
384
385		composite-in@20 {
386			compatible = "adi,adv7180";
387			reg = <0x20>;
388
389			port {
390				adv7180: endpoint {
391					bus-width = <8>;
392					remote-endpoint = <&vin1ep>;
393				};
394			};
395		};
396
397		hdmi@39 {
398			compatible = "adi,adv7511w";
399			reg = <0x39>;
400			interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>;
401			clocks = <&cec_clock>;
402			clock-names = "cec";
403
404			avdd-supply = <&reg_1p8v>;
405			dvdd-supply = <&reg_1p8v>;
406			pvdd-supply = <&reg_1p8v>;
407			dvdd-3v-supply = <&reg_3p3v>;
408			bgvdd-supply = <&reg_1p8v>;
409
410			adi,input-depth = <8>;
411			adi,input-colorspace = "rgb";
412			adi,input-clock = "1x";
413
414			ports {
415				#address-cells = <1>;
416				#size-cells = <0>;
417
418				port@0 {
419					reg = <0>;
420					adv7511_in: endpoint {
421						remote-endpoint = <&du_out_rgb>;
422					};
423				};
424
425				port@1 {
426					reg = <1>;
427					adv7511_out: endpoint {
428						remote-endpoint = <&hdmi_con_out>;
429					};
430				};
431			};
432		};
433
434		hdmi-in@4c {
435			compatible = "adi,adv7612";
436			reg = <0x4c>;
437			interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>;
438			default-input = <0>;
439
440			ports {
441				#address-cells = <1>;
442				#size-cells = <0>;
443
444				port@0 {
445					reg = <0>;
446					adv7612_in: endpoint {
447						remote-endpoint = <&hdmi_con_in>;
448					};
449				};
450
451				port@2 {
452					reg = <2>;
453					adv7612_out: endpoint {
454						remote-endpoint = <&vin0ep2>;
455					};
456				};
457			};
458		};
459
460		eeprom@50 {
461			compatible = "renesas,r1ex24002", "atmel,24c02";
462			reg = <0x50>;
463			pagesize = <16>;
464		};
465	};
466
467	/*
468	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
469	 * A fallback to GPIO is provided.
470	 */
471	i2cexio4: i2c-mux3 {
472		compatible = "i2c-demux-pinctrl";
473		i2c-parent = <&i2c4>, <&gpioi2c4>;
474		i2c-bus-name = "i2c-exio4";
475		#address-cells = <1>;
476		#size-cells = <0>;
477	};
478};
479
480&du {
481	pinctrl-0 = <&du_pins>;
482	pinctrl-names = "default";
483	status = "okay";
484
485	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
486		 <&x13_clk>, <&x2_clk>;
487	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
488
489	ports {
490		port@0 {
491			endpoint {
492				remote-endpoint = <&adv7511_in>;
493			};
494		};
495	};
496};
497
498&lvds0 {
499	ports {
500		port@1 {
501			lvds_connector: endpoint {
502			};
503		};
504	};
505};
506
507&extal_clk {
508	clock-frequency = <20000000>;
509};
510
511&pfc {
512	pinctrl-0 = <&scif_clk_pins>;
513	pinctrl-names = "default";
514
515	i2c1_pins: i2c1 {
516		groups = "i2c1";
517		function = "i2c1";
518	};
519
520	i2c2_pins: i2c2 {
521		groups = "i2c2";
522		function = "i2c2";
523	};
524
525	i2c4_pins: i2c4 {
526		groups = "i2c4_c";
527		function = "i2c4";
528	};
529
530	du_pins: du {
531		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
532		function = "du";
533	};
534
535	scif0_pins: scif0 {
536		groups = "scif0_data_d";
537		function = "scif0";
538	};
539
540	scif1_pins: scif1 {
541		groups = "scif1_data_d";
542		function = "scif1";
543	};
544
545	scif_clk_pins: scif_clk {
546		groups = "scif_clk";
547		function = "scif_clk";
548	};
549
550	ether_pins: ether {
551		groups = "eth_link", "eth_mdio", "eth_rmii";
552		function = "eth";
553	};
554
555	phy1_pins: phy1 {
556		groups = "intc_irq0";
557		function = "intc";
558	};
559
560	pmic_irq_pins: pmicirq {
561		groups = "intc_irq2";
562		function = "intc";
563	};
564
565	sdhi0_pins: sd0 {
566		groups = "sdhi0_data4", "sdhi0_ctrl";
567		function = "sdhi0";
568		power-source = <3300>;
569	};
570
571	sdhi0_pins_uhs: sd0_uhs {
572		groups = "sdhi0_data4", "sdhi0_ctrl";
573		function = "sdhi0";
574		power-source = <1800>;
575	};
576
577	sdhi1_pins: sd1 {
578		groups = "sdhi1_data4", "sdhi1_ctrl";
579		function = "sdhi1";
580		power-source = <3300>;
581	};
582
583	sdhi1_pins_uhs: sd1_uhs {
584		groups = "sdhi1_data4", "sdhi1_ctrl";
585		function = "sdhi1";
586		power-source = <1800>;
587	};
588
589	sdhi2_pins: sd2 {
590		groups = "sdhi2_data4", "sdhi2_ctrl";
591		function = "sdhi2";
592		power-source = <3300>;
593	};
594
595	sdhi2_pins_uhs: sd2_uhs {
596		groups = "sdhi2_data4", "sdhi2_ctrl";
597		function = "sdhi2";
598		power-source = <1800>;
599	};
600
601	qspi_pins: qspi {
602		groups = "qspi_ctrl", "qspi_data4";
603		function = "qspi";
604	};
605
606	msiof0_pins: msiof0 {
607		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
608				 "msiof0_tx";
609		function = "msiof0";
610	};
611
612	usb0_pins: usb0 {
613		groups = "usb0";
614		function = "usb0";
615	};
616
617	usb1_pins: usb1 {
618		groups = "usb1";
619		function = "usb1";
620	};
621
622	vin0_pins: vin0 {
623		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
624		function = "vin0";
625	};
626
627	vin1_pins: vin1 {
628		groups = "vin1_data8", "vin1_clk";
629		function = "vin1";
630	};
631
632	sound_pins: sound {
633		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
634		function = "ssi";
635	};
636
637	sound_clk_pins: sound_clk {
638		groups = "audio_clk_a";
639		function = "audio_clk";
640	};
641
642	keyboard_pins: keyboard {
643		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
644		bias-pull-up;
645	};
646};
647
648&ether {
649	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
650	pinctrl-names = "default";
651
652	phy-handle = <&phy1>;
653	renesas,ether-link-active-low;
654	status = "okay";
655
656	phy1: ethernet-phy@1 {
657		compatible = "ethernet-phy-id0022.1537",
658			     "ethernet-phy-ieee802.3-c22";
659		reg = <1>;
660		interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
661		micrel,led-mode = <1>;
662		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
663	};
664};
665
666&cmt0 {
667	status = "okay";
668};
669
670&rwdt {
671	timeout-sec = <60>;
672	status = "okay";
673};
674
675&sata0 {
676	status = "okay";
677};
678
679&scif0 {
680	pinctrl-0 = <&scif0_pins>;
681	pinctrl-names = "default";
682
683	status = "okay";
684};
685
686&scif1 {
687	pinctrl-0 = <&scif1_pins>;
688	pinctrl-names = "default";
689
690	status = "okay";
691};
692
693&scif_clk {
694	clock-frequency = <14745600>;
695};
696
697&sdhi0 {
698	pinctrl-0 = <&sdhi0_pins>;
699	pinctrl-1 = <&sdhi0_pins_uhs>;
700	pinctrl-names = "default", "state_uhs";
701
702	vmmc-supply = <&vcc_sdhi0>;
703	vqmmc-supply = <&vccq_sdhi0>;
704	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
705	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
706	sd-uhs-sdr50;
707	sd-uhs-sdr104;
708	status = "okay";
709};
710
711&sdhi1 {
712	pinctrl-0 = <&sdhi1_pins>;
713	pinctrl-1 = <&sdhi1_pins_uhs>;
714	pinctrl-names = "default", "state_uhs";
715
716	vmmc-supply = <&vcc_sdhi1>;
717	vqmmc-supply = <&vccq_sdhi1>;
718	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
719	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
720	sd-uhs-sdr50;
721	status = "okay";
722};
723
724&sdhi2 {
725	pinctrl-0 = <&sdhi2_pins>;
726	pinctrl-1 = <&sdhi2_pins_uhs>;
727	pinctrl-names = "default", "state_uhs";
728
729	vmmc-supply = <&vcc_sdhi2>;
730	vqmmc-supply = <&vccq_sdhi2>;
731	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
732	sd-uhs-sdr50;
733	status = "okay";
734};
735
736&qspi {
737	pinctrl-0 = <&qspi_pins>;
738	pinctrl-names = "default";
739
740	status = "okay";
741
742	flash: flash@0 {
743		compatible = "spansion,s25fl512s", "jedec,spi-nor";
744		reg = <0>;
745		spi-max-frequency = <30000000>;
746		spi-tx-bus-width = <4>;
747		spi-rx-bus-width = <4>;
748		spi-cpha;
749		spi-cpol;
750		m25p,fast-read;
751
752		partitions {
753			compatible = "fixed-partitions";
754			#address-cells = <1>;
755			#size-cells = <1>;
756
757			partition@0 {
758				label = "loader";
759				reg = <0x00000000 0x00080000>;
760				read-only;
761			};
762			partition@80000 {
763				label = "user";
764				reg = <0x00080000 0x00580000>;
765				read-only;
766			};
767			partition@600000 {
768				label = "flash";
769				reg = <0x00600000 0x03a00000>;
770			};
771		};
772	};
773};
774
775&msiof0 {
776	pinctrl-0 = <&msiof0_pins>;
777	pinctrl-names = "default";
778
779	status = "okay";
780
781	pmic: pmic@0 {
782		compatible = "renesas,r2a11302ft";
783		reg = <0>;
784		spi-max-frequency = <6000000>;
785		spi-cpol;
786		spi-cpha;
787	};
788};
789
790&i2c1 {
791	pinctrl-0 = <&i2c1_pins>;
792	pinctrl-names = "i2c-exio1";
793};
794
795&i2c2 {
796	pinctrl-0 = <&i2c2_pins>;
797	pinctrl-names = "i2c-hdmi";
798
799	clock-frequency = <100000>;
800};
801
802&i2c4 {
803	pinctrl-0 = <&i2c4_pins>;
804	pinctrl-names = "i2c-exio4";
805};
806
807&i2c6 {
808	pinctrl-names = "default";
809	pinctrl-0 = <&pmic_irq_pins>;
810	status = "okay";
811	clock-frequency = <100000>;
812
813	pmic@58 {
814		compatible = "dlg,da9063";
815		reg = <0x58>;
816		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
817		interrupt-controller;
818		#interrupt-cells = <2>;
819
820		rtc {
821			compatible = "dlg,da9063-rtc";
822		};
823
824		watchdog {
825			compatible = "dlg,da9063-watchdog";
826		};
827	};
828
829	vdd_dvfs: regulator@68 {
830		compatible = "dlg,da9210";
831		reg = <0x68>;
832		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
833
834		regulator-min-microvolt = <1000000>;
835		regulator-max-microvolt = <1000000>;
836		regulator-boot-on;
837		regulator-always-on;
838	};
839};
840
841&pci0 {
842	status = "okay";
843	pinctrl-0 = <&usb0_pins>;
844	pinctrl-names = "default";
845};
846
847&pci1 {
848	status = "okay";
849	pinctrl-0 = <&usb1_pins>;
850	pinctrl-names = "default";
851};
852
853&hsusb {
854	status = "okay";
855	pinctrl-0 = <&usb0_pins>;
856	pinctrl-names = "default";
857	renesas,enable-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
858};
859
860&usbphy {
861	status = "okay";
862};
863
864&pcie_bus_clk {
865	clock-frequency = <100000000>;
866};
867
868&pciec {
869	status = "okay";
870};
871
872&cpu0 {
873	cpu0-supply = <&vdd_dvfs>;
874};
875
876/* HDMI video input */
877&vin0 {
878	status = "okay";
879	pinctrl-0 = <&vin0_pins>;
880	pinctrl-names = "default";
881
882	port {
883		vin0ep2: endpoint {
884			remote-endpoint = <&adv7612_out>;
885			bus-width = <24>;
886			hsync-active = <0>;
887			vsync-active = <0>;
888			pclk-sample = <1>;
889			data-active = <1>;
890		};
891	};
892};
893
894/* composite video input */
895&vin1 {
896	status = "okay";
897	pinctrl-0 = <&vin1_pins>;
898	pinctrl-names = "default";
899
900	port {
901		vin1ep: endpoint {
902			remote-endpoint = <&adv7180>;
903			bus-width = <8>;
904		};
905	};
906};
907
908&rcar_sound {
909	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
910	pinctrl-names = "default";
911
912	/* Single DAI */
913	#sound-dai-cells = <0>;
914
915	status = "okay";
916
917	rcar_sound,dai {
918		dai0 {
919			playback = <&ssi0>, <&src2>, <&dvc0>;
920			capture  = <&ssi1>, <&src3>, <&dvc1>;
921		};
922	};
923};
924
925&ssi1 {
926	shared-pin;
927};
928