1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the Lager board 4 * 5 * Copyright (C) 2013-2014 Renesas Solutions Corp. 6 * Copyright (C) 2014 Cogent Embedded, Inc. 7 * Copyright (C) 2015-2016 Renesas Electronics Corporation 8 */ 9 10/* 11 * SSI-AK4643 12 * 13 * SW1: 1: AK4643 14 * 2: CN22 15 * 3: ADV7511 16 * 17 * This command is required when Playback/Capture 18 * 19 * amixer set "LINEOUT Mixer DACL" on 20 * amixer set "DVC Out" 100% 21 * amixer set "DVC In" 100% 22 * 23 * You can use Mute 24 * 25 * amixer set "DVC Out Mute" on 26 * amixer set "DVC In Mute" on 27 * 28 * You can use Volume Ramp 29 * 30 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" 31 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" 32 * amixer set "DVC Out Ramp" on 33 * aplay xxx.wav & 34 * amixer set "DVC Out" 80% // Volume Down 35 * amixer set "DVC Out" 100% // Volume Up 36 */ 37 38/dts-v1/; 39#include "r8a7790.dtsi" 40#include <dt-bindings/gpio/gpio.h> 41#include <dt-bindings/input/input.h> 42 43/ { 44 model = "Lager"; 45 compatible = "renesas,lager", "renesas,r8a7790"; 46 47 aliases { 48 serial0 = &scif0; 49 serial1 = &scifa1; 50 i2c8 = &gpioi2c1; 51 i2c9 = &gpioi2c2; 52 i2c10 = &i2cexio0; 53 i2c11 = &i2cexio1; 54 i2c12 = &i2chdmi; 55 i2c13 = &i2cpwr; 56 mmc0 = &mmcif1; 57 mmc1 = &sdhi0; 58 mmc2 = &sdhi2; 59 }; 60 61 chosen { 62 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 63 stdout-path = "serial0:115200n8"; 64 }; 65 66 memory@40000000 { 67 device_type = "memory"; 68 reg = <0 0x40000000 0 0x40000000>; 69 }; 70 71 memory@140000000 { 72 device_type = "memory"; 73 reg = <1 0x40000000 0 0xc0000000>; 74 }; 75 76 keyboard { 77 compatible = "gpio-keys"; 78 79 pinctrl-0 = <&keyboard_pins>; 80 pinctrl-names = "default"; 81 82 key-1 { 83 linux,code = <KEY_1>; 84 label = "SW2-1"; 85 wakeup-source; 86 debounce-interval = <20>; 87 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; 88 }; 89 key-2 { 90 linux,code = <KEY_2>; 91 label = "SW2-2"; 92 wakeup-source; 93 debounce-interval = <20>; 94 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; 95 }; 96 key-3 { 97 linux,code = <KEY_3>; 98 label = "SW2-3"; 99 wakeup-source; 100 debounce-interval = <20>; 101 gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; 102 }; 103 key-4 { 104 linux,code = <KEY_4>; 105 label = "SW2-4"; 106 wakeup-source; 107 debounce-interval = <20>; 108 gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; 109 }; 110 }; 111 112 leds { 113 compatible = "gpio-leds"; 114 led6 { 115 gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; 116 }; 117 led7 { 118 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; 119 }; 120 led8 { 121 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; 122 }; 123 }; 124 125 fixedregulator1v8: regulator-1v8 { 126 compatible = "regulator-fixed"; 127 regulator-name = "fixed-1.8V"; 128 regulator-min-microvolt = <1800000>; 129 regulator-max-microvolt = <1800000>; 130 regulator-boot-on; 131 regulator-always-on; 132 }; 133 134 fixedregulator3v3: regulator-3v3 { 135 compatible = "regulator-fixed"; 136 regulator-name = "fixed-3.3V"; 137 regulator-min-microvolt = <3300000>; 138 regulator-max-microvolt = <3300000>; 139 regulator-boot-on; 140 regulator-always-on; 141 }; 142 143 vcc_sdhi0: regulator-vcc-sdhi0 { 144 compatible = "regulator-fixed"; 145 146 regulator-name = "SDHI0 Vcc"; 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 150 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; 151 enable-active-high; 152 }; 153 154 vccq_sdhi0: regulator-vccq-sdhi0 { 155 compatible = "regulator-gpio"; 156 157 regulator-name = "SDHI0 VccQ"; 158 regulator-min-microvolt = <1800000>; 159 regulator-max-microvolt = <3300000>; 160 161 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; 162 gpios-states = <1>; 163 states = <3300000 1>, <1800000 0>; 164 }; 165 166 vcc_sdhi2: regulator-vcc-sdhi2 { 167 compatible = "regulator-fixed"; 168 169 regulator-name = "SDHI2 Vcc"; 170 regulator-min-microvolt = <3300000>; 171 regulator-max-microvolt = <3300000>; 172 173 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; 174 enable-active-high; 175 }; 176 177 vccq_sdhi2: regulator-vccq-sdhi2 { 178 compatible = "regulator-gpio"; 179 180 regulator-name = "SDHI2 VccQ"; 181 regulator-min-microvolt = <1800000>; 182 regulator-max-microvolt = <3300000>; 183 184 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; 185 gpios-states = <1>; 186 states = <3300000 1>, <1800000 0>; 187 }; 188 189 audio_clock: audio_clock { 190 compatible = "fixed-clock"; 191 #clock-cells = <0>; 192 clock-frequency = <11289600>; 193 }; 194 195 rsnd_ak4643: sound { 196 compatible = "simple-audio-card"; 197 198 simple-audio-card,format = "left_j"; 199 simple-audio-card,bitclock-master = <&sndcodec>; 200 simple-audio-card,frame-master = <&sndcodec>; 201 202 sndcpu: simple-audio-card,cpu { 203 sound-dai = <&rcar_sound>; 204 }; 205 206 sndcodec: simple-audio-card,codec { 207 sound-dai = <&ak4643>; 208 clocks = <&audio_clock>; 209 }; 210 }; 211 212 vga-encoder { 213 compatible = "adi,adv7123"; 214 215 ports { 216 #address-cells = <1>; 217 #size-cells = <0>; 218 219 port@0 { 220 reg = <0>; 221 adv7123_in: endpoint { 222 remote-endpoint = <&du_out_rgb>; 223 }; 224 }; 225 port@1 { 226 reg = <1>; 227 adv7123_out: endpoint { 228 remote-endpoint = <&vga_in>; 229 }; 230 }; 231 }; 232 }; 233 234 vga { 235 compatible = "vga-connector"; 236 237 port { 238 vga_in: endpoint { 239 remote-endpoint = <&adv7123_out>; 240 }; 241 }; 242 }; 243 244 hdmi-in { 245 compatible = "hdmi-connector"; 246 type = "a"; 247 248 port { 249 hdmi_con_in: endpoint { 250 remote-endpoint = <&adv7612_in>; 251 }; 252 }; 253 }; 254 255 cec_clock: cec-clock { 256 compatible = "fixed-clock"; 257 #clock-cells = <0>; 258 clock-frequency = <12000000>; 259 }; 260 261 hdmi-out { 262 compatible = "hdmi-connector"; 263 type = "a"; 264 265 port { 266 hdmi_con_out: endpoint { 267 remote-endpoint = <&adv7511_out>; 268 }; 269 }; 270 }; 271 272 x2_clk: x2-clock { 273 compatible = "fixed-clock"; 274 #clock-cells = <0>; 275 clock-frequency = <148500000>; 276 }; 277 278 x13_clk: x13-clock { 279 compatible = "fixed-clock"; 280 #clock-cells = <0>; 281 clock-frequency = <148500000>; 282 }; 283 284 gpioi2c1: i2c-8 { 285 #address-cells = <1>; 286 #size-cells = <0>; 287 compatible = "i2c-gpio"; 288 status = "disabled"; 289 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 290 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 291 i2c-gpio,delay-us = <5>; 292 }; 293 294 gpioi2c2: i2c-9 { 295 #address-cells = <1>; 296 #size-cells = <0>; 297 compatible = "i2c-gpio"; 298 status = "disabled"; 299 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 300 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 301 i2c-gpio,delay-us = <5>; 302 }; 303 304 /* 305 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 306 * We use the I2C demuxer, so the desired IP core can be selected at runtime 307 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 308 * Note: For testing the I2C slave feature, it is convenient to connect this 309 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 310 * instantiate the slave device at runtime according to the documentation. 311 * You can then communicate with the slave via IIC3. 312 * 313 * IIC0/I2C0 does not appear to support fallback to GPIO. 314 */ 315 i2cexio0: i2c-mux1 { 316 compatible = "i2c-demux-pinctrl"; 317 i2c-parent = <&iic0>, <&i2c0>; 318 i2c-bus-name = "i2c-exio0"; 319 #address-cells = <1>; 320 #size-cells = <0>; 321 }; 322 323 /* 324 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). 325 * This is similar to the arangement described for i2cexio0 (above) 326 * with a fallback to GPIO also provided. 327 */ 328 i2cexio1: i2c-mux2 { 329 compatible = "i2c-demux-pinctrl"; 330 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; 331 i2c-bus-name = "i2c-exio1"; 332 #address-cells = <1>; 333 #size-cells = <0>; 334 }; 335 336 /* 337 * IIC2 and I2C2 may be switched using pinmux. 338 * A fallback to GPIO is also provided. 339 */ 340 i2chdmi: i2c-mux3 { 341 compatible = "i2c-demux-pinctrl"; 342 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; 343 i2c-bus-name = "i2c-hdmi"; 344 #address-cells = <1>; 345 #size-cells = <0>; 346 347 ak4643: codec@12 { 348 compatible = "asahi-kasei,ak4643"; 349 #sound-dai-cells = <0>; 350 reg = <0x12>; 351 }; 352 353 composite-in@20 { 354 compatible = "adi,adv7180"; 355 reg = <0x20>; 356 357 port { 358 adv7180: endpoint { 359 bus-width = <8>; 360 remote-endpoint = <&vin1ep0>; 361 }; 362 }; 363 }; 364 365 hdmi@39 { 366 compatible = "adi,adv7511w"; 367 reg = <0x39>; 368 interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; 369 clocks = <&cec_clock>; 370 clock-names = "cec"; 371 372 avdd-supply = <&fixedregulator1v8>; 373 dvdd-supply = <&fixedregulator1v8>; 374 pvdd-supply = <&fixedregulator1v8>; 375 dvdd-3v-supply = <&fixedregulator3v3>; 376 bgvdd-supply = <&fixedregulator1v8>; 377 378 adi,input-depth = <8>; 379 adi,input-colorspace = "rgb"; 380 adi,input-clock = "1x"; 381 382 ports { 383 #address-cells = <1>; 384 #size-cells = <0>; 385 386 port@0 { 387 reg = <0>; 388 adv7511_in: endpoint { 389 remote-endpoint = <&lvds0_out>; 390 }; 391 }; 392 393 port@1 { 394 reg = <1>; 395 adv7511_out: endpoint { 396 remote-endpoint = <&hdmi_con_out>; 397 }; 398 }; 399 }; 400 }; 401 402 hdmi-in@4c { 403 compatible = "adi,adv7612"; 404 reg = <0x4c>; 405 interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; 406 default-input = <0>; 407 408 ports { 409 #address-cells = <1>; 410 #size-cells = <0>; 411 412 port@0 { 413 reg = <0>; 414 adv7612_in: endpoint { 415 remote-endpoint = <&hdmi_con_in>; 416 }; 417 }; 418 419 port@2 { 420 reg = <2>; 421 adv7612_out: endpoint { 422 remote-endpoint = <&vin0ep2>; 423 }; 424 }; 425 }; 426 }; 427 }; 428 429 /* 430 * IIC3 and I2C3 may be switched using pinmux. 431 * IIC3/I2C3 does not appear to support fallback to GPIO. 432 */ 433 i2cpwr: i2c-mux4 { 434 compatible = "i2c-demux-pinctrl"; 435 pinctrl-names = "default"; 436 pinctrl-0 = <&pmic_irq_pins>; 437 i2c-parent = <&iic3>, <&i2c3>; 438 i2c-bus-name = "i2c-pwr"; 439 #address-cells = <1>; 440 #size-cells = <0>; 441 442 pmic@58 { 443 compatible = "dlg,da9063"; 444 reg = <0x58>; 445 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; 446 interrupt-controller; 447 #interrupt-cells = <2>; 448 449 rtc { 450 compatible = "dlg,da9063-rtc"; 451 }; 452 453 watchdog { 454 compatible = "dlg,da9063-watchdog"; 455 }; 456 }; 457 458 vdd_dvfs: regulator@68 { 459 compatible = "dlg,da9210"; 460 reg = <0x68>; 461 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; 462 463 regulator-min-microvolt = <1000000>; 464 regulator-max-microvolt = <1000000>; 465 regulator-boot-on; 466 regulator-always-on; 467 }; 468 }; 469}; 470 471&du { 472 pinctrl-0 = <&du_pins>; 473 pinctrl-names = "default"; 474 status = "okay"; 475 476 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, 477 <&x13_clk>, <&x2_clk>; 478 clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; 479 480 ports { 481 port@0 { 482 endpoint { 483 remote-endpoint = <&adv7123_in>; 484 }; 485 }; 486 }; 487}; 488 489&lvds0 { 490 status = "okay"; 491 492 ports { 493 port@1 { 494 endpoint { 495 remote-endpoint = <&adv7511_in>; 496 }; 497 }; 498 }; 499}; 500 501&lvds1 { 502 ports { 503 port@1 { 504 lvds_connector: endpoint { 505 }; 506 }; 507 }; 508}; 509 510&extal_clk { 511 clock-frequency = <20000000>; 512}; 513 514&pfc { 515 pinctrl-0 = <&scif_clk_pins>; 516 pinctrl-names = "default"; 517 518 du_pins: du { 519 groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; 520 function = "du"; 521 }; 522 523 scif0_pins: scif0 { 524 groups = "scif0_data"; 525 function = "scif0"; 526 }; 527 528 scif_clk_pins: scif_clk { 529 groups = "scif_clk"; 530 function = "scif_clk"; 531 }; 532 533 ether_pins: ether { 534 groups = "eth_link", "eth_mdio", "eth_rmii"; 535 function = "eth"; 536 }; 537 538 phy1_pins: phy1 { 539 groups = "intc_irq0"; 540 function = "intc"; 541 }; 542 543 scifa1_pins: scifa1 { 544 groups = "scifa1_data"; 545 function = "scifa1"; 546 }; 547 548 sdhi0_pins: sd0 { 549 groups = "sdhi0_data4", "sdhi0_ctrl"; 550 function = "sdhi0"; 551 power-source = <3300>; 552 }; 553 554 sdhi0_pins_uhs: sd0_uhs { 555 groups = "sdhi0_data4", "sdhi0_ctrl"; 556 function = "sdhi0"; 557 power-source = <1800>; 558 }; 559 560 sdhi2_pins: sd2 { 561 groups = "sdhi2_data4", "sdhi2_ctrl"; 562 function = "sdhi2"; 563 power-source = <3300>; 564 }; 565 566 sdhi2_pins_uhs: sd2_uhs { 567 groups = "sdhi2_data4", "sdhi2_ctrl"; 568 function = "sdhi2"; 569 power-source = <1800>; 570 }; 571 572 mmc1_pins: mmc1 { 573 groups = "mmc1_data8", "mmc1_ctrl"; 574 function = "mmc1"; 575 }; 576 577 qspi_pins: qspi { 578 groups = "qspi_ctrl", "qspi_data4"; 579 function = "qspi"; 580 }; 581 582 msiof1_pins: msiof1 { 583 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", 584 "msiof1_tx"; 585 function = "msiof1"; 586 }; 587 588 i2c0_pins: i2c0 { 589 groups = "i2c0"; 590 function = "i2c0"; 591 }; 592 593 iic0_pins: iic0 { 594 groups = "iic0"; 595 function = "iic0"; 596 }; 597 598 i2c1_pins: i2c1 { 599 groups = "i2c1"; 600 function = "i2c1"; 601 }; 602 603 iic1_pins: iic1 { 604 groups = "iic1"; 605 function = "iic1"; 606 }; 607 608 i2c2_pins: i2c2 { 609 groups = "i2c2"; 610 function = "i2c2"; 611 }; 612 613 iic2_pins: iic2 { 614 groups = "iic2"; 615 function = "iic2"; 616 }; 617 618 i2c3_pins: i2c3 { 619 groups = "i2c3"; 620 function = "i2c3"; 621 }; 622 623 iic3_pins: iic3 { 624 groups = "iic3"; 625 function = "iic3"; 626 }; 627 628 pmic_irq_pins: pmicirq { 629 groups = "intc_irq2"; 630 function = "intc"; 631 }; 632 633 hsusb_pins: hsusb { 634 groups = "usb0_ovc_vbus"; 635 function = "usb0"; 636 }; 637 638 usb0_pins: usb0 { 639 groups = "usb0"; 640 function = "usb0"; 641 }; 642 643 usb1_pins: usb1 { 644 groups = "usb1"; 645 function = "usb1"; 646 }; 647 648 usb2_pins: usb2 { 649 groups = "usb2"; 650 function = "usb2"; 651 }; 652 653 vin0_pins: vin0 { 654 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; 655 function = "vin0"; 656 }; 657 658 vin1_pins: vin1 { 659 groups = "vin1_data8", "vin1_clk"; 660 function = "vin1"; 661 }; 662 663 sound_pins: sound { 664 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; 665 function = "ssi"; 666 }; 667 668 sound_clk_pins: sound_clk { 669 groups = "audio_clk_a"; 670 function = "audio_clk"; 671 }; 672 673 keyboard_pins: keyboard { 674 pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28"; 675 bias-pull-up; 676 }; 677}; 678 679ðer { 680 pinctrl-0 = <ðer_pins>, <&phy1_pins>; 681 pinctrl-names = "default"; 682 683 phy-handle = <&phy1>; 684 renesas,ether-link-active-low; 685 status = "okay"; 686 687 phy1: ethernet-phy@1 { 688 compatible = "ethernet-phy-id0022.1537", 689 "ethernet-phy-ieee802.3-c22"; 690 reg = <1>; 691 interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; 692 micrel,led-mode = <1>; 693 reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; 694 }; 695}; 696 697&cmt0 { 698 status = "okay"; 699}; 700 701&mmcif1 { 702 pinctrl-0 = <&mmc1_pins>; 703 pinctrl-names = "default"; 704 705 vmmc-supply = <&fixedregulator3v3>; 706 bus-width = <8>; 707 non-removable; 708 status = "okay"; 709}; 710 711&sata1 { 712 status = "okay"; 713}; 714 715&qspi { 716 pinctrl-0 = <&qspi_pins>; 717 pinctrl-names = "default"; 718 719 status = "okay"; 720 721 flash: flash@0 { 722 compatible = "spansion,s25fl512s", "jedec,spi-nor"; 723 reg = <0>; 724 spi-max-frequency = <30000000>; 725 spi-tx-bus-width = <4>; 726 spi-rx-bus-width = <4>; 727 spi-cpha; 728 spi-cpol; 729 m25p,fast-read; 730 731 partitions { 732 compatible = "fixed-partitions"; 733 #address-cells = <1>; 734 #size-cells = <1>; 735 736 partition@0 { 737 label = "loader"; 738 reg = <0x00000000 0x00040000>; 739 read-only; 740 }; 741 partition@40000 { 742 label = "user"; 743 reg = <0x00040000 0x00400000>; 744 read-only; 745 }; 746 partition@440000 { 747 label = "flash"; 748 reg = <0x00440000 0x03bc0000>; 749 }; 750 }; 751 }; 752}; 753 754&scif0 { 755 pinctrl-0 = <&scif0_pins>; 756 pinctrl-names = "default"; 757 758 status = "okay"; 759}; 760 761&scifa1 { 762 pinctrl-0 = <&scifa1_pins>; 763 pinctrl-names = "default"; 764 765 status = "okay"; 766}; 767 768&scif_clk { 769 clock-frequency = <14745600>; 770}; 771 772&msiof1 { 773 pinctrl-0 = <&msiof1_pins>; 774 pinctrl-names = "default"; 775 776 status = "okay"; 777 778 pmic: pmic@0 { 779 compatible = "renesas,r2a11302ft"; 780 reg = <0>; 781 spi-max-frequency = <6000000>; 782 spi-cpol; 783 spi-cpha; 784 }; 785}; 786 787&sdhi0 { 788 pinctrl-0 = <&sdhi0_pins>; 789 pinctrl-1 = <&sdhi0_pins_uhs>; 790 pinctrl-names = "default", "state_uhs"; 791 792 vmmc-supply = <&vcc_sdhi0>; 793 vqmmc-supply = <&vccq_sdhi0>; 794 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; 795 sd-uhs-sdr50; 796 sd-uhs-sdr104; 797 status = "okay"; 798}; 799 800&sdhi2 { 801 pinctrl-0 = <&sdhi2_pins>; 802 pinctrl-1 = <&sdhi2_pins_uhs>; 803 pinctrl-names = "default", "state_uhs"; 804 805 vmmc-supply = <&vcc_sdhi2>; 806 vqmmc-supply = <&vccq_sdhi2>; 807 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; 808 sd-uhs-sdr50; 809 status = "okay"; 810}; 811 812&cpu0 { 813 cpu0-supply = <&vdd_dvfs>; 814}; 815 816&i2c0 { 817 pinctrl-0 = <&i2c0_pins>; 818 pinctrl-names = "i2c-exio0"; 819}; 820 821&iic0 { 822 pinctrl-0 = <&iic0_pins>; 823 pinctrl-names = "i2c-exio0"; 824}; 825 826&i2c1 { 827 pinctrl-0 = <&i2c1_pins>; 828 pinctrl-names = "i2c-exio1"; 829}; 830 831&iic1 { 832 pinctrl-0 = <&iic1_pins>; 833 pinctrl-names = "i2c-exio1"; 834}; 835 836&i2c2 { 837 pinctrl-0 = <&i2c2_pins>; 838 pinctrl-names = "i2c-hdmi"; 839 840 clock-frequency = <100000>; 841}; 842 843&iic2 { 844 pinctrl-0 = <&iic2_pins>; 845 pinctrl-names = "i2c-hdmi"; 846 847 clock-frequency = <100000>; 848}; 849 850&i2c3 { 851 pinctrl-0 = <&i2c3_pins>; 852 pinctrl-names = "i2c-pwr"; 853}; 854 855&iic3 { 856 pinctrl-0 = <&iic3_pins>; 857 pinctrl-names = "i2c-pwr"; 858}; 859 860&pci0 { 861 status = "okay"; 862 pinctrl-0 = <&usb0_pins>; 863 pinctrl-names = "default"; 864}; 865 866&pci1 { 867 status = "okay"; 868 pinctrl-0 = <&usb1_pins>; 869 pinctrl-names = "default"; 870}; 871 872&xhci { 873 status = "okay"; 874 pinctrl-0 = <&usb2_pins>; 875 pinctrl-names = "default"; 876}; 877 878&pci2 { 879 status = "okay"; 880 pinctrl-0 = <&usb2_pins>; 881 pinctrl-names = "default"; 882}; 883 884&hsusb { 885 status = "okay"; 886 pinctrl-0 = <&hsusb_pins>; 887 pinctrl-names = "default"; 888 renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; 889}; 890 891&usbphy { 892 status = "okay"; 893}; 894 895/* HDMI video input */ 896&vin0 { 897 pinctrl-0 = <&vin0_pins>; 898 pinctrl-names = "default"; 899 900 status = "okay"; 901 902 port { 903 vin0ep2: endpoint { 904 remote-endpoint = <&adv7612_out>; 905 bus-width = <24>; 906 hsync-active = <0>; 907 vsync-active = <0>; 908 pclk-sample = <1>; 909 data-active = <1>; 910 }; 911 }; 912}; 913 914/* composite video input */ 915&vin1 { 916 pinctrl-0 = <&vin1_pins>; 917 pinctrl-names = "default"; 918 919 status = "okay"; 920 921 port { 922 vin1ep0: endpoint { 923 remote-endpoint = <&adv7180>; 924 bus-width = <8>; 925 }; 926 }; 927}; 928 929&rcar_sound { 930 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; 931 pinctrl-names = "default"; 932 933 /* Single DAI */ 934 #sound-dai-cells = <0>; 935 936 status = "okay"; 937 938 rcar_sound,dai { 939 dai0 { 940 playback = <&ssi0>, <&src2>, <&dvc0>; 941 capture = <&ssi1>, <&src3>, <&dvc1>; 942 }; 943 }; 944}; 945 946&rwdt { 947 timeout-sec = <60>; 948 status = "okay"; 949}; 950 951&ssi1 { 952 shared-pin; 953}; 954