xref: /linux/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts (revision 6e7fd890f1d6ac83805409e9c346240de2705584) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the GR-Peach board
4 *
5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
6 * Copyright (C) 2016 Renesas Electronics
7 */
8
9/dts-v1/;
10#include "r7s72100.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
13
14/ {
15	model = "GR-Peach";
16	compatible = "renesas,gr-peach", "renesas,r7s72100";
17
18	aliases {
19		serial0 = &scif2;
20	};
21
22	chosen {
23		bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
24		stdout-path = "serial0:115200n8";
25	};
26
27	memory@20000000 {
28		device_type = "memory";
29		reg = <0x20000000 0x00a00000>;
30	};
31
32	flash@18000000 {
33		compatible = "mtd-rom";
34		reg = <0x18000000 0x00800000>;
35		bank-width = <4>;
36		device-width = <1>;
37
38		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
39		power-domains = <&cpg_clocks>;
40
41		#address-cells = <1>;
42		#size-cells = <1>;
43
44		rootfs@600000 {
45			label = "rootfs";
46			reg = <0x00600000 0x00200000>;
47		};
48	};
49
50	leds {
51		status = "okay";
52		compatible = "gpio-leds";
53
54		led1 {
55			gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
56		};
57	};
58};
59
60&pinctrl {
61	scif2_pins: serial2 {
62		/* P6_2 as RxD2; P6_3 as TxD2 */
63		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
64	};
65
66	ether_pins: ether {
67		/* Ethernet on Ports 1,3,5,10 */
68		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
69			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
70			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
71			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
72			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
73			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
74			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
75			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
76			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
77			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
78			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
79			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
80			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
81			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
82			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
83			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
84			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
85			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
86	};
87};
88
89&extal_clk {
90	clock-frequency = <13333000>;
91};
92
93&usb_x1_clk {
94	clock-frequency = <48000000>;
95};
96
97&mtu2 {
98	status = "okay";
99};
100
101&ostm0 {
102	status = "okay";
103};
104
105&ostm1 {
106	status = "okay";
107};
108
109&scif2 {
110	pinctrl-names = "default";
111	pinctrl-0 = <&scif2_pins>;
112
113	status = "okay";
114};
115
116&ether {
117	pinctrl-names = "default";
118	pinctrl-0 = <&ether_pins>;
119
120	status = "okay";
121
122	renesas,no-ether-link;
123	phy-handle = <&phy0>;
124
125	phy0: ethernet-phy@0 {
126		compatible = "ethernet-phy-id0007.c0f0",
127			     "ethernet-phy-ieee802.3-c22";
128		reg = <0>;
129
130		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
131		reset-delay-us = <5>;
132	};
133};
134