1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-msm8974pro.dtsi" 3#include "pm8841.dtsi" 4#include "pm8941.dtsi" 5#include <dt-bindings/input/input.h> 6#include <dt-bindings/leds/common.h> 7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 8 9/ { 10 model = "Fairphone 2"; 11 compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974"; 12 chassis-type = "handset"; 13 14 aliases { 15 mmc0 = &sdhc_1; 16 mmc1 = &sdhc_2; 17 serial0 = &blsp1_uart2; 18 }; 19 20 chosen { 21 stdout-path = "serial0:115200n8"; 22 }; 23 24 gpio-keys { 25 compatible = "gpio-keys"; 26 27 pinctrl-names = "default"; 28 pinctrl-0 = <&gpio_keys_pin_a>; 29 30 key-camera-snapshot { 31 label = "camera_snapshot"; 32 gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; 33 linux,code = <KEY_CAMERA>; 34 wakeup-source; 35 debounce-interval = <15>; 36 }; 37 38 key-volume-down { 39 label = "volume_down"; 40 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; 41 linux,code = <KEY_VOLUMEDOWN>; 42 wakeup-source; 43 debounce-interval = <15>; 44 }; 45 46 key-volume-up { 47 label = "volume_up"; 48 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; 49 linux,code = <KEY_VOLUMEUP>; 50 wakeup-source; 51 debounce-interval = <15>; 52 }; 53 }; 54 55 vibrator { 56 compatible = "gpio-vibrator"; 57 enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; 58 vcc-supply = <&pm8941_l18>; 59 }; 60 61 vreg_boost: vreg-boost { 62 compatible = "regulator-fixed"; 63 64 regulator-name = "vreg-boost"; 65 regulator-min-microvolt = <3150000>; 66 regulator-max-microvolt = <3150000>; 67 68 regulator-always-on; 69 regulator-boot-on; 70 71 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; 72 enable-active-high; 73 74 pinctrl-names = "default"; 75 pinctrl-0 = <&boost_bypass_n_pin>; 76 }; 77 78 vreg_vph_pwr: vreg-vph-pwr { 79 compatible = "regulator-fixed"; 80 regulator-name = "vph-pwr"; 81 82 regulator-min-microvolt = <3600000>; 83 regulator-max-microvolt = <3600000>; 84 85 regulator-always-on; 86 }; 87}; 88 89&blsp1_i2c2 { 90 status = "okay"; 91 92 touchscreen@41 { 93 compatible = "ilitek,ili2120"; 94 reg = <0x41>; 95 interrupt-parent = <&tlmm>; 96 interrupts = <28 IRQ_TYPE_EDGE_FALLING>; 97 reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; 98 99 touchscreen-size-x = <1080>; 100 touchscreen-size-y = <1920>; 101 }; 102}; 103 104&blsp1_uart2 { 105 status = "okay"; 106}; 107 108&imem { 109 reboot-mode { 110 mode-normal = <0x77665501>; 111 mode-bootloader = <0x77665500>; 112 mode-recovery = <0x77665502>; 113 }; 114}; 115 116&pm8941_gpios { 117 gpio_keys_pin_a: gpio-keys-active-state { 118 pins = "gpio1", "gpio2", "gpio5"; 119 function = "normal"; 120 121 bias-pull-up; 122 power-source = <PM8941_GPIO_S3>; 123 }; 124}; 125 126&pm8941_lpg { 127 status = "okay"; 128 129 qcom,power-source = <1>; 130 131 multi-led { 132 color = <LED_COLOR_ID_RGB>; 133 function = LED_FUNCTION_STATUS; 134 135 #address-cells = <1>; 136 #size-cells = <0>; 137 138 led@7 { 139 reg = <7>; 140 color = <LED_COLOR_ID_RED>; 141 }; 142 143 led@6 { 144 reg = <6>; 145 color = <LED_COLOR_ID_GREEN>; 146 }; 147 148 led@5 { 149 reg = <5>; 150 color = <LED_COLOR_ID_BLUE>; 151 }; 152 }; 153}; 154 155&pronto { 156 status = "okay"; 157 158 vddmx-supply = <&pm8841_s1>; 159 vddcx-supply = <&pm8841_s2>; 160 vddpx-supply = <&pm8941_s3>; 161 162 pinctrl-names = "default"; 163 pinctrl-0 = <&wcnss_pin_a>; 164 165 iris { 166 vddxo-supply = <&pm8941_l6>; 167 vddrfa-supply = <&pm8941_l11>; 168 vddpa-supply = <&pm8941_l19>; 169 vdddig-supply = <&pm8941_s3>; 170 }; 171 172 smd-edge { 173 qcom,remote-pid = <4>; 174 label = "pronto"; 175 176 wcnss { 177 status = "okay"; 178 }; 179 }; 180}; 181 182&remoteproc_adsp { 183 status = "okay"; 184 cx-supply = <&pm8841_s2>; 185}; 186 187&remoteproc_mss { 188 status = "okay"; 189 cx-supply = <&pm8841_s2>; 190 mss-supply = <&pm8841_s3>; 191 mx-supply = <&pm8841_s1>; 192 pll-supply = <&pm8941_l12>; 193}; 194 195&rpm_requests { 196 regulators-0 { 197 compatible = "qcom,rpm-pm8841-regulators"; 198 199 pm8841_s1: s1 { 200 regulator-min-microvolt = <675000>; 201 regulator-max-microvolt = <1050000>; 202 }; 203 204 pm8841_s2: s2 { 205 regulator-min-microvolt = <500000>; 206 regulator-max-microvolt = <1050000>; 207 }; 208 209 pm8841_s3: s3 { 210 regulator-min-microvolt = <1050000>; 211 regulator-max-microvolt = <1050000>; 212 }; 213 }; 214 215 regulators-1 { 216 compatible = "qcom,rpm-pm8941-regulators"; 217 218 vdd_l1_l3-supply = <&pm8941_s1>; 219 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; 220 vdd_l4_l11-supply = <&pm8941_s1>; 221 vdd_l5_l7-supply = <&pm8941_s2>; 222 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; 223 vdd_l9_l10_l17_l22-supply = <&vreg_boost>; 224 vdd_l13_l20_l23_l24-supply = <&vreg_boost>; 225 vdd_l21-supply = <&vreg_boost>; 226 227 pm8941_s1: s1 { 228 regulator-min-microvolt = <1300000>; 229 regulator-max-microvolt = <1300000>; 230 regulator-always-on; 231 regulator-boot-on; 232 }; 233 234 pm8941_s2: s2 { 235 regulator-min-microvolt = <2150000>; 236 regulator-max-microvolt = <2150000>; 237 regulator-boot-on; 238 }; 239 240 pm8941_s3: s3 { 241 regulator-min-microvolt = <1800000>; 242 regulator-max-microvolt = <1800000>; 243 regulator-always-on; 244 regulator-boot-on; 245 }; 246 247 pm8941_l1: l1 { 248 regulator-min-microvolt = <1225000>; 249 regulator-max-microvolt = <1225000>; 250 regulator-always-on; 251 regulator-boot-on; 252 }; 253 254 pm8941_l2: l2 { 255 regulator-min-microvolt = <1200000>; 256 regulator-max-microvolt = <1200000>; 257 }; 258 259 pm8941_l3: l3 { 260 regulator-min-microvolt = <1225000>; 261 regulator-max-microvolt = <1225000>; 262 }; 263 264 pm8941_l4: l4 { 265 regulator-min-microvolt = <1225000>; 266 regulator-max-microvolt = <1225000>; 267 }; 268 269 pm8941_l5: l5 { 270 regulator-min-microvolt = <1800000>; 271 regulator-max-microvolt = <1800000>; 272 }; 273 274 pm8941_l6: l6 { 275 regulator-min-microvolt = <1800000>; 276 regulator-max-microvolt = <1800000>; 277 regulator-boot-on; 278 }; 279 280 pm8941_l7: l7 { 281 regulator-min-microvolt = <1800000>; 282 regulator-max-microvolt = <1800000>; 283 regulator-boot-on; 284 }; 285 286 pm8941_l8: l8 { 287 regulator-min-microvolt = <1800000>; 288 regulator-max-microvolt = <1800000>; 289 }; 290 291 pm8941_l9: l9 { 292 regulator-min-microvolt = <1800000>; 293 regulator-max-microvolt = <2950000>; 294 }; 295 296 pm8941_l10: l10 { 297 regulator-min-microvolt = <1800000>; 298 regulator-max-microvolt = <2950000>; 299 }; 300 301 pm8941_l11: l11 { 302 regulator-min-microvolt = <1225000>; 303 regulator-max-microvolt = <1350000>; 304 }; 305 306 pm8941_l12: l12 { 307 regulator-min-microvolt = <1800000>; 308 regulator-max-microvolt = <1800000>; 309 regulator-always-on; 310 regulator-boot-on; 311 }; 312 313 pm8941_l13: l13 { 314 regulator-min-microvolt = <1800000>; 315 regulator-max-microvolt = <2950000>; 316 regulator-boot-on; 317 }; 318 319 pm8941_l14: l14 { 320 regulator-min-microvolt = <1800000>; 321 regulator-max-microvolt = <1800000>; 322 }; 323 324 pm8941_l15: l15 { 325 regulator-min-microvolt = <2050000>; 326 regulator-max-microvolt = <2050000>; 327 }; 328 329 pm8941_l16: l16 { 330 regulator-min-microvolt = <2700000>; 331 regulator-max-microvolt = <2700000>; 332 }; 333 334 pm8941_l17: l17 { 335 regulator-min-microvolt = <2850000>; 336 regulator-max-microvolt = <2850000>; 337 }; 338 339 pm8941_l18: l18 { 340 regulator-min-microvolt = <2850000>; 341 regulator-max-microvolt = <2850000>; 342 }; 343 344 pm8941_l19: l19 { 345 regulator-min-microvolt = <2900000>; 346 regulator-max-microvolt = <3350000>; 347 }; 348 349 pm8941_l20: l20 { 350 regulator-min-microvolt = <2950000>; 351 regulator-max-microvolt = <2950000>; 352 regulator-system-load = <200000>; 353 regulator-allow-set-load; 354 regulator-boot-on; 355 }; 356 357 pm8941_l21: l21 { 358 regulator-min-microvolt = <2950000>; 359 regulator-max-microvolt = <2950000>; 360 regulator-boot-on; 361 }; 362 363 pm8941_l22: l22 { 364 regulator-min-microvolt = <3000000>; 365 regulator-max-microvolt = <3300000>; 366 }; 367 368 pm8941_l23: l23 { 369 regulator-min-microvolt = <3000000>; 370 regulator-max-microvolt = <3000000>; 371 }; 372 373 pm8941_l24: l24 { 374 regulator-min-microvolt = <3075000>; 375 regulator-max-microvolt = <3075000>; 376 regulator-boot-on; 377 }; 378 }; 379}; 380 381&sdhc_1 { 382 status = "okay"; 383 384 vmmc-supply = <&pm8941_l20>; 385 vqmmc-supply = <&pm8941_s3>; 386 387 pinctrl-names = "default", "sleep"; 388 pinctrl-0 = <&sdc1_on>; 389 pinctrl-1 = <&sdc1_off>; 390}; 391 392&sdhc_2 { 393 status = "okay"; 394 395 vmmc-supply = <&pm8941_l21>; 396 vqmmc-supply = <&pm8941_l13>; 397 398 pinctrl-names = "default", "sleep"; 399 pinctrl-0 = <&sdc2_on>; 400 pinctrl-1 = <&sdc2_off>; 401}; 402 403&smbb { 404 usb-charge-current-limit = <1500000>; 405 qcom,fast-charge-safe-current = <1500000>; 406 qcom,fast-charge-current-limit = <1500000>; 407 qcom,fast-charge-safe-voltage = <4380000>; 408 qcom,fast-charge-high-threshold-voltage = <4350000>; 409 qcom,auto-recharge-threshold-voltage = <4240000>; 410 qcom,minimum-input-voltage = <4450000>; 411 412 status = "okay"; 413}; 414 415&tlmm { 416 sdc1_on: sdc1-on-state { 417 clk-pins { 418 pins = "sdc1_clk"; 419 drive-strength = <16>; 420 bias-disable; 421 }; 422 423 cmd-data-pins { 424 pins = "sdc1_cmd", "sdc1_data"; 425 drive-strength = <10>; 426 bias-pull-up; 427 }; 428 }; 429 430 sdc2_on: sdc2-on-state { 431 clk-pins { 432 pins = "sdc2_clk"; 433 drive-strength = <10>; 434 bias-disable; 435 }; 436 437 cmd-data-pins { 438 pins = "sdc2_cmd", "sdc2_data"; 439 drive-strength = <6>; 440 bias-pull-up; 441 }; 442 }; 443 444 wcnss_pin_a: wcnss-pin-active-state { 445 wlan-pins { 446 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; 447 function = "wlan"; 448 449 drive-strength = <6>; 450 bias-pull-down; 451 }; 452 453 bt-pins { 454 pins = "gpio35", "gpio43", "gpio44"; 455 function = "bt"; 456 457 drive-strength = <2>; 458 bias-pull-down; 459 }; 460 461 fm-pins { 462 pins = "gpio41", "gpio42"; 463 function = "fm"; 464 465 drive-strength = <2>; 466 bias-pull-down; 467 }; 468 }; 469}; 470 471&usb { 472 status = "okay"; 473 474 phys = <&usb_hs1_phy>; 475 phy-select = <&tcsr 0xb000 0>; 476 extcon = <&smbb>, <&usb_id>; 477 vbus-supply = <&chg_otg>; 478 479 hnp-disable; 480 srp-disable; 481 adp-disable; 482}; 483 484&usb_hs1_phy { 485 status = "okay"; 486 487 v1p8-supply = <&pm8941_l6>; 488 v3p3-supply = <&pm8941_l24>; 489 490 extcon = <&smbb>; 491 qcom,init-seq = /bits/ 8 <0x1 0x64>; 492}; 493