1// SPDX-License-Identifier: BSD-3-Clause 2 3/dts-v1/; 4 5#include "qcom-msm8226.dtsi" 6#include "pm8226.dtsi" 7 8/delete-node/ &smem_region; 9 10/ { 11 model = "Motorola Moto G 4G (2013)"; 12 compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; 13 chassis-type = "handset"; 14 15 aliases { 16 mmc0 = &sdhc_1; /* SDC1 eMMC slot */ 17 mmc1 = &sdhc_2; /* SDC2 SD card slot */ 18 }; 19 20 chosen { 21 #address-cells = <1>; 22 #size-cells = <1>; 23 ranges; 24 25 framebuffer0: framebuffer@3200000 { 26 compatible = "simple-framebuffer"; 27 reg = <0x03200000 0x800000>; 28 width = <720>; 29 height = <1280>; 30 stride = <(720 * 3)>; 31 format = "r8g8b8"; 32 }; 33 }; 34 35 gpio-keys { 36 compatible = "gpio-keys"; 37 38 event-hall-sensor { 39 label = "Hall Effect Sensor"; 40 gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; 41 linux,input-type = <EV_SW>; 42 linux,code = <SW_LID>; 43 linux,can-disable; 44 }; 45 46 key-volume-up { 47 label = "Volume Up"; 48 gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; 49 linux,code = <KEY_VOLUMEUP>; 50 debounce-interval = <15>; 51 }; 52 }; 53 54 reserved-memory { 55 #address-cells = <1>; 56 #size-cells = <1>; 57 ranges; 58 59 framebuffer@3200000 { 60 reg = <0x03200000 0x800000>; 61 no-map; 62 }; 63 64 smem_region: smem@fa00000 { 65 reg = <0x0fa00000 0x100000>; 66 no-map; 67 }; 68 }; 69}; 70 71&blsp1_i2c3 { 72 status = "okay"; 73 74 sensor@48 { 75 compatible = "ti,tmp108"; 76 reg = <0x48>; 77 }; 78}; 79 80&blsp1_uart3 { 81 status = "okay"; 82}; 83 84&pm8226_resin { 85 linux,code = <KEY_VOLUMEDOWN>; 86 status = "okay"; 87}; 88 89&pm8226_vib { 90 status = "okay"; 91}; 92 93&rpm_requests { 94 regulators { 95 compatible = "qcom,rpm-pm8226-regulators"; 96 97 pm8226_s3: s3 { 98 regulator-min-microvolt = <1200000>; 99 regulator-max-microvolt = <1300000>; 100 }; 101 102 pm8226_s4: s4 { 103 regulator-min-microvolt = <1800000>; 104 regulator-max-microvolt = <2200000>; 105 }; 106 107 pm8226_s5: s5 { 108 regulator-min-microvolt = <1150000>; 109 regulator-max-microvolt = <1150000>; 110 }; 111 112 pm8226_l1: l1 { 113 regulator-min-microvolt = <1225000>; 114 regulator-max-microvolt = <1225000>; 115 }; 116 117 pm8226_l2: l2 { 118 regulator-min-microvolt = <1200000>; 119 regulator-max-microvolt = <1200000>; 120 }; 121 122 pm8226_l3: l3 { 123 regulator-min-microvolt = <750000>; 124 regulator-max-microvolt = <1337500>; 125 }; 126 127 pm8226_l4: l4 { 128 regulator-min-microvolt = <1200000>; 129 regulator-max-microvolt = <1200000>; 130 }; 131 132 pm8226_l5: l5 { 133 regulator-min-microvolt = <1200000>; 134 regulator-max-microvolt = <1200000>; 135 }; 136 137 pm8226_l6: l6 { 138 regulator-min-microvolt = <1800000>; 139 regulator-max-microvolt = <1800000>; 140 regulator-allow-set-load; 141 }; 142 143 pm8226_l7: l7 { 144 regulator-min-microvolt = <1850000>; 145 regulator-max-microvolt = <1850000>; 146 }; 147 148 pm8226_l8: l8 { 149 regulator-min-microvolt = <1800000>; 150 regulator-max-microvolt = <1800000>; 151 }; 152 153 pm8226_l9: l9 { 154 regulator-min-microvolt = <2050000>; 155 regulator-max-microvolt = <2050000>; 156 }; 157 158 pm8226_l10: l10 { 159 regulator-min-microvolt = <1800000>; 160 regulator-max-microvolt = <1800000>; 161 }; 162 163 pm8226_l12: l12 { 164 regulator-min-microvolt = <1800000>; 165 regulator-max-microvolt = <1800000>; 166 }; 167 168 pm8226_l14: l14 { 169 regulator-min-microvolt = <2750000>; 170 regulator-max-microvolt = <2750000>; 171 }; 172 173 pm8226_l15: l15 { 174 regulator-min-microvolt = <2800000>; 175 regulator-max-microvolt = <2800000>; 176 }; 177 178 pm8226_l16: l16 { 179 regulator-min-microvolt = <3000000>; 180 regulator-max-microvolt = <3350000>; 181 }; 182 183 pm8226_l17: l17 { 184 regulator-min-microvolt = <2950000>; 185 regulator-max-microvolt = <2950000>; 186 }; 187 188 pm8226_l18: l18 { 189 regulator-min-microvolt = <2950000>; 190 regulator-max-microvolt = <2950000>; 191 }; 192 193 pm8226_l19: l19 { 194 regulator-min-microvolt = <2850000>; 195 regulator-max-microvolt = <2850000>; 196 }; 197 198 pm8226_l20: l20 { 199 regulator-min-microvolt = <3075000>; 200 regulator-max-microvolt = <3075000>; 201 }; 202 203 pm8226_l21: l21 { 204 regulator-min-microvolt = <1800000>; 205 regulator-max-microvolt = <2950000>; 206 regulator-allow-set-load; 207 }; 208 209 pm8226_l22: l22 { 210 regulator-min-microvolt = <1800000>; 211 regulator-max-microvolt = <2950000>; 212 }; 213 214 pm8226_l23: l23 { 215 regulator-min-microvolt = <1800000>; 216 regulator-max-microvolt = <2950000>; 217 }; 218 219 pm8226_l24: l24 { 220 regulator-min-microvolt = <1300000>; 221 regulator-max-microvolt = <1350000>; 222 }; 223 224 pm8226_l25: l25 { 225 regulator-min-microvolt = <1775000>; 226 regulator-max-microvolt = <2125000>; 227 }; 228 229 pm8226_l26: l26 { 230 regulator-min-microvolt = <1225000>; 231 regulator-max-microvolt = <1225000>; 232 }; 233 234 pm8226_l27: l27 { 235 regulator-min-microvolt = <2050000>; 236 regulator-max-microvolt = <2050000>; 237 }; 238 239 pm8226_l28: l28 { 240 regulator-min-microvolt = <1800000>; 241 regulator-max-microvolt = <3400000>; 242 regulator-boot-on; 243 }; 244 245 pm8226_lvs1: lvs1 { 246 /* Pull-up for I2C lines */ 247 regulator-always-on; 248 }; 249 }; 250}; 251 252&sdhc_1 { 253 vmmc-supply = <&pm8226_l17>; 254 vqmmc-supply = <&pm8226_l6>; 255 256 bus-width = <8>; 257 non-removable; 258 259 status = "okay"; 260}; 261 262&sdhc_2 { 263 vmmc-supply = <&pm8226_l18>; 264 vqmmc-supply = <&pm8226_l21>; 265 266 bus-width = <4>; 267 cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; 268 269 status = "okay"; 270}; 271 272&smbb { 273 qcom,fast-charge-safe-current = <2000000>; 274 qcom,fast-charge-current-limit = <1900000>; 275 qcom,fast-charge-safe-voltage = <4400000>; 276 qcom,minimum-input-voltage = <4300000>; 277 278 status = "okay"; 279}; 280 281&usb { 282 extcon = <&smbb>; 283 dr_mode = "peripheral"; 284 status = "okay"; 285}; 286 287&usb_hs_phy { 288 extcon = <&smbb>; 289 v1p8-supply = <&pm8226_l10>; 290 v3p3-supply = <&pm8226_l20>; 291}; 292