1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2015, The Linux Foundation. All rights reserved. 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/clock/qcom,gcc-ipq4019.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/interrupt-controller/irq.h> 11 12/ { 13 #address-cells = <1>; 14 #size-cells = <1>; 15 16 model = "Qualcomm Technologies, Inc. IPQ4019"; 17 compatible = "qcom,ipq4019"; 18 interrupt-parent = <&intc>; 19 20 reserved-memory { 21 #address-cells = <0x1>; 22 #size-cells = <0x1>; 23 ranges; 24 25 smem_region: smem@87e00000 { 26 reg = <0x87e00000 0x080000>; 27 no-map; 28 }; 29 30 tz@87e80000 { 31 reg = <0x87e80000 0x180000>; 32 no-map; 33 }; 34 }; 35 36 aliases { 37 spi0 = &blsp1_spi1; 38 spi1 = &blsp1_spi2; 39 i2c0 = &blsp1_i2c3; 40 i2c1 = &blsp1_i2c4; 41 }; 42 43 cpus { 44 #address-cells = <1>; 45 #size-cells = <0>; 46 cpu@0 { 47 device_type = "cpu"; 48 compatible = "arm,cortex-a7"; 49 enable-method = "qcom,kpss-acc-v2"; 50 next-level-cache = <&L2>; 51 qcom,acc = <&acc0>; 52 qcom,saw = <&saw0>; 53 reg = <0x0>; 54 clocks = <&gcc GCC_APPS_CLK_SRC>; 55 clock-frequency = <0>; 56 clock-latency = <256000>; 57 operating-points-v2 = <&cpu0_opp_table>; 58 }; 59 60 cpu@1 { 61 device_type = "cpu"; 62 compatible = "arm,cortex-a7"; 63 enable-method = "qcom,kpss-acc-v2"; 64 next-level-cache = <&L2>; 65 qcom,acc = <&acc1>; 66 qcom,saw = <&saw1>; 67 reg = <0x1>; 68 clocks = <&gcc GCC_APPS_CLK_SRC>; 69 clock-frequency = <0>; 70 clock-latency = <256000>; 71 operating-points-v2 = <&cpu0_opp_table>; 72 }; 73 74 cpu@2 { 75 device_type = "cpu"; 76 compatible = "arm,cortex-a7"; 77 enable-method = "qcom,kpss-acc-v2"; 78 next-level-cache = <&L2>; 79 qcom,acc = <&acc2>; 80 qcom,saw = <&saw2>; 81 reg = <0x2>; 82 clocks = <&gcc GCC_APPS_CLK_SRC>; 83 clock-frequency = <0>; 84 clock-latency = <256000>; 85 operating-points-v2 = <&cpu0_opp_table>; 86 }; 87 88 cpu@3 { 89 device_type = "cpu"; 90 compatible = "arm,cortex-a7"; 91 enable-method = "qcom,kpss-acc-v2"; 92 next-level-cache = <&L2>; 93 qcom,acc = <&acc3>; 94 qcom,saw = <&saw3>; 95 reg = <0x3>; 96 clocks = <&gcc GCC_APPS_CLK_SRC>; 97 clock-frequency = <0>; 98 clock-latency = <256000>; 99 operating-points-v2 = <&cpu0_opp_table>; 100 }; 101 102 L2: l2-cache { 103 compatible = "cache"; 104 cache-level = <2>; 105 cache-unified; 106 qcom,saw = <&saw_l2>; 107 }; 108 }; 109 110 cpu0_opp_table: opp-table { 111 compatible = "operating-points-v2"; 112 opp-shared; 113 114 opp-48000000 { 115 opp-hz = /bits/ 64 <48000000>; 116 clock-latency-ns = <256000>; 117 }; 118 opp-200000000 { 119 opp-hz = /bits/ 64 <200000000>; 120 clock-latency-ns = <256000>; 121 }; 122 opp-500000000 { 123 opp-hz = /bits/ 64 <500000000>; 124 clock-latency-ns = <256000>; 125 }; 126 opp-716000000 { 127 opp-hz = /bits/ 64 <716000000>; 128 clock-latency-ns = <256000>; 129 }; 130 }; 131 132 memory { 133 device_type = "memory"; 134 reg = <0x0 0x0>; 135 }; 136 137 pmu { 138 compatible = "arm,cortex-a7-pmu"; 139 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | 140 IRQ_TYPE_LEVEL_HIGH)>; 141 }; 142 143 clocks { 144 sleep_clk: sleep_clk { 145 compatible = "fixed-clock"; 146 clock-frequency = <32000>; 147 #clock-cells = <0>; 148 }; 149 150 xo: xo { 151 compatible = "fixed-clock"; 152 clock-frequency = <48000000>; 153 #clock-cells = <0>; 154 }; 155 }; 156 157 firmware { 158 scm { 159 compatible = "qcom,scm-ipq4019", "qcom,scm"; 160 }; 161 }; 162 163 timer { 164 compatible = "arm,armv7-timer"; 165 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 166 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 167 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 168 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 169 clock-frequency = <48000000>; 170 always-on; 171 }; 172 173 soc { 174 #address-cells = <1>; 175 #size-cells = <1>; 176 ranges; 177 compatible = "simple-bus"; 178 179 intc: interrupt-controller@b000000 { 180 compatible = "qcom,msm-qgic2"; 181 interrupt-controller; 182 #interrupt-cells = <3>; 183 reg = <0x0b000000 0x1000>, 184 <0x0b002000 0x1000>; 185 }; 186 187 gcc: clock-controller@1800000 { 188 compatible = "qcom,gcc-ipq4019"; 189 #clock-cells = <1>; 190 #power-domain-cells = <1>; 191 #reset-cells = <1>; 192 reg = <0x1800000 0x60000>; 193 clocks = <&xo>, <&sleep_clk>; 194 clock-names = "xo", "sleep_clk"; 195 }; 196 197 prng: rng@22000 { 198 compatible = "qcom,prng"; 199 reg = <0x22000 0x140>; 200 clocks = <&gcc GCC_PRNG_AHB_CLK>; 201 clock-names = "core"; 202 status = "disabled"; 203 }; 204 205 tlmm: pinctrl@1000000 { 206 compatible = "qcom,ipq4019-pinctrl"; 207 reg = <0x01000000 0x300000>; 208 gpio-controller; 209 gpio-ranges = <&tlmm 0 0 100>; 210 #gpio-cells = <2>; 211 interrupt-controller; 212 #interrupt-cells = <2>; 213 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 214 }; 215 216 vqmmc: regulator@1948000 { 217 compatible = "qcom,vqmmc-ipq4019-regulator"; 218 reg = <0x01948000 0x4>; 219 regulator-name = "vqmmc"; 220 regulator-min-microvolt = <1500000>; 221 regulator-max-microvolt = <3000000>; 222 regulator-always-on; 223 status = "disabled"; 224 }; 225 226 sdhci: mmc@7824900 { 227 compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4"; 228 reg = <0x7824900 0x11c>, <0x7824000 0x800>; 229 reg-names = "hc", "core"; 230 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 231 interrupt-names = "hc_irq", "pwr_irq"; 232 bus-width = <8>; 233 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 234 <&gcc GCC_SDCC1_APPS_CLK>, 235 <&xo>; 236 clock-names = "iface", 237 "core", 238 "xo"; 239 status = "disabled"; 240 }; 241 242 blsp_dma: dma-controller@7884000 { 243 compatible = "qcom,bam-v1.7.0"; 244 reg = <0x07884000 0x23000>; 245 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 246 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 247 clock-names = "bam_clk"; 248 #dma-cells = <1>; 249 qcom,ee = <0>; 250 status = "disabled"; 251 }; 252 253 blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */ 254 compatible = "qcom,spi-qup-v2.2.1"; 255 reg = <0x78b5000 0x600>; 256 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 257 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 258 <&gcc GCC_BLSP1_AHB_CLK>; 259 clock-names = "core", "iface"; 260 #address-cells = <1>; 261 #size-cells = <0>; 262 dmas = <&blsp_dma 4>, <&blsp_dma 5>; 263 dma-names = "tx", "rx"; 264 status = "disabled"; 265 }; 266 267 blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */ 268 compatible = "qcom,spi-qup-v2.2.1"; 269 reg = <0x78b6000 0x600>; 270 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 271 clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, 272 <&gcc GCC_BLSP1_AHB_CLK>; 273 clock-names = "core", "iface"; 274 #address-cells = <1>; 275 #size-cells = <0>; 276 dmas = <&blsp_dma 6>, <&blsp_dma 7>; 277 dma-names = "tx", "rx"; 278 status = "disabled"; 279 }; 280 281 blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */ 282 compatible = "qcom,i2c-qup-v2.2.1"; 283 reg = <0x78b7000 0x600>; 284 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 285 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, 286 <&gcc GCC_BLSP1_AHB_CLK>; 287 clock-names = "core", "iface"; 288 #address-cells = <1>; 289 #size-cells = <0>; 290 dmas = <&blsp_dma 8>, <&blsp_dma 9>; 291 dma-names = "tx", "rx"; 292 status = "disabled"; 293 }; 294 295 blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */ 296 compatible = "qcom,i2c-qup-v2.2.1"; 297 reg = <0x78b8000 0x600>; 298 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 299 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 300 <&gcc GCC_BLSP1_AHB_CLK>; 301 clock-names = "core", "iface"; 302 #address-cells = <1>; 303 #size-cells = <0>; 304 dmas = <&blsp_dma 10>, <&blsp_dma 11>; 305 dma-names = "tx", "rx"; 306 status = "disabled"; 307 }; 308 309 cryptobam: dma-controller@8e04000 { 310 compatible = "qcom,bam-v1.7.0"; 311 reg = <0x08e04000 0x20000>; 312 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 313 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; 314 clock-names = "bam_clk"; 315 #dma-cells = <1>; 316 qcom,ee = <1>; 317 qcom,controlled-remotely; 318 status = "disabled"; 319 }; 320 321 crypto: crypto@8e3a000 { 322 compatible = "qcom,crypto-v5.1"; 323 reg = <0x08e3a000 0x6000>; 324 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 325 <&gcc GCC_CRYPTO_AXI_CLK>, 326 <&gcc GCC_CRYPTO_CLK>; 327 clock-names = "iface", "bus", "core"; 328 dmas = <&cryptobam 2>, <&cryptobam 3>; 329 dma-names = "rx", "tx"; 330 status = "disabled"; 331 }; 332 333 acc0: power-manager@b088000 { 334 compatible = "qcom,kpss-acc-v2"; 335 reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; 336 }; 337 338 acc1: power-manager@b098000 { 339 compatible = "qcom,kpss-acc-v2"; 340 reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; 341 }; 342 343 acc2: power-manager@b0a8000 { 344 compatible = "qcom,kpss-acc-v2"; 345 reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; 346 }; 347 348 acc3: power-manager@b0b8000 { 349 compatible = "qcom,kpss-acc-v2"; 350 reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; 351 }; 352 353 saw0: power-manager@b089000 { 354 compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; 355 reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; 356 }; 357 358 saw1: power-manager@b099000 { 359 compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; 360 reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; 361 }; 362 363 saw2: power-manager@b0a9000 { 364 compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; 365 reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; 366 }; 367 368 saw3: power-manager@b0b9000 { 369 compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; 370 reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; 371 }; 372 373 saw_l2: power-manager@b012000 { 374 compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2"; 375 reg = <0xb012000 0x1000>; 376 }; 377 378 blsp1_uart1: serial@78af000 { 379 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 380 reg = <0x78af000 0x200>; 381 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 382 status = "disabled"; 383 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 384 <&gcc GCC_BLSP1_AHB_CLK>; 385 clock-names = "core", "iface"; 386 dmas = <&blsp_dma 0>, <&blsp_dma 1>; 387 dma-names = "tx", "rx"; 388 }; 389 390 blsp1_uart2: serial@78b0000 { 391 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 392 reg = <0x78b0000 0x200>; 393 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 394 status = "disabled"; 395 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, 396 <&gcc GCC_BLSP1_AHB_CLK>; 397 clock-names = "core", "iface"; 398 dmas = <&blsp_dma 2>, <&blsp_dma 3>; 399 dma-names = "tx", "rx"; 400 }; 401 402 watchdog: watchdog@b017000 { 403 compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt"; 404 reg = <0xb017000 0x40>; 405 clocks = <&sleep_clk>; 406 timeout-sec = <10>; 407 status = "disabled"; 408 }; 409 410 restart@4ab000 { 411 compatible = "qcom,pshold"; 412 reg = <0x4ab000 0x4>; 413 }; 414 415 pcie0: pcie@40000000 { 416 compatible = "qcom,pcie-ipq4019"; 417 reg = <0x40000000 0xf1d>, 418 <0x40000f20 0xa8>, 419 <0x80000 0x2000>, 420 <0x40100000 0x1000>; 421 reg-names = "dbi", "elbi", "parf", "config"; 422 device_type = "pci"; 423 linux,pci-domain = <0>; 424 bus-range = <0x00 0xff>; 425 num-lanes = <1>; 426 #address-cells = <3>; 427 #size-cells = <2>; 428 429 ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, 430 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; 431 432 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 433 interrupt-names = "msi"; 434 #interrupt-cells = <1>; 435 interrupt-map-mask = <0 0 0 0x7>; 436 interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 437 <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 438 <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 439 <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 440 clocks = <&gcc GCC_PCIE_AHB_CLK>, 441 <&gcc GCC_PCIE_AXI_M_CLK>, 442 <&gcc GCC_PCIE_AXI_S_CLK>; 443 clock-names = "aux", 444 "master_bus", 445 "slave_bus"; 446 447 resets = <&gcc PCIE_AXI_M_ARES>, 448 <&gcc PCIE_AXI_S_ARES>, 449 <&gcc PCIE_PIPE_ARES>, 450 <&gcc PCIE_AXI_M_VMIDMT_ARES>, 451 <&gcc PCIE_AXI_S_XPU_ARES>, 452 <&gcc PCIE_PARF_XPU_ARES>, 453 <&gcc PCIE_PHY_ARES>, 454 <&gcc PCIE_AXI_M_STICKY_ARES>, 455 <&gcc PCIE_PIPE_STICKY_ARES>, 456 <&gcc PCIE_PWR_ARES>, 457 <&gcc PCIE_AHB_ARES>, 458 <&gcc PCIE_PHY_AHB_ARES>; 459 reset-names = "axi_m", 460 "axi_s", 461 "pipe", 462 "axi_m_vmid", 463 "axi_s_xpu", 464 "parf", 465 "phy", 466 "axi_m_sticky", 467 "pipe_sticky", 468 "pwr", 469 "ahb", 470 "phy_ahb"; 471 472 status = "disabled"; 473 }; 474 475 qpic_bam: dma-controller@7984000 { 476 compatible = "qcom,bam-v1.7.0"; 477 reg = <0x7984000 0x1a000>; 478 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 479 clocks = <&gcc GCC_QPIC_CLK>; 480 clock-names = "bam_clk"; 481 #dma-cells = <1>; 482 qcom,ee = <0>; 483 status = "disabled"; 484 }; 485 486 nand: nand-controller@79b0000 { 487 compatible = "qcom,ipq4019-nand"; 488 reg = <0x79b0000 0x1000>; 489 #address-cells = <1>; 490 #size-cells = <0>; 491 clocks = <&gcc GCC_QPIC_CLK>, 492 <&gcc GCC_QPIC_AHB_CLK>; 493 clock-names = "core", "aon"; 494 495 dmas = <&qpic_bam 0>, 496 <&qpic_bam 1>, 497 <&qpic_bam 2>; 498 dma-names = "tx", "rx", "cmd"; 499 status = "disabled"; 500 501 nand@0 { 502 reg = <0>; 503 504 nand-ecc-strength = <4>; 505 nand-ecc-step-size = <512>; 506 nand-bus-width = <8>; 507 }; 508 }; 509 510 wifi0: wifi@a000000 { 511 compatible = "qcom,ipq4019-wifi"; 512 reg = <0xa000000 0x200000>; 513 resets = <&gcc WIFI0_CPU_INIT_RESET>, 514 <&gcc WIFI0_RADIO_SRIF_RESET>, 515 <&gcc WIFI0_RADIO_WARM_RESET>, 516 <&gcc WIFI0_RADIO_COLD_RESET>, 517 <&gcc WIFI0_CORE_WARM_RESET>, 518 <&gcc WIFI0_CORE_COLD_RESET>; 519 reset-names = "wifi_cpu_init", "wifi_radio_srif", 520 "wifi_radio_warm", "wifi_radio_cold", 521 "wifi_core_warm", "wifi_core_cold"; 522 clocks = <&gcc GCC_WCSS2G_CLK>, 523 <&gcc GCC_WCSS2G_REF_CLK>, 524 <&gcc GCC_WCSS2G_RTC_CLK>; 525 clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", 526 "wifi_wcss_rtc"; 527 interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, 528 <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, 529 <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, 530 <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, 531 <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, 532 <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, 533 <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, 534 <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, 535 <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, 536 <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, 537 <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, 538 <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, 539 <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, 540 <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, 541 <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, 542 <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, 543 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; 544 interrupt-names = "msi0", "msi1", "msi2", "msi3", 545 "msi4", "msi5", "msi6", "msi7", 546 "msi8", "msi9", "msi10", "msi11", 547 "msi12", "msi13", "msi14", "msi15", 548 "legacy"; 549 status = "disabled"; 550 }; 551 552 wifi1: wifi@a800000 { 553 compatible = "qcom,ipq4019-wifi"; 554 reg = <0xa800000 0x200000>; 555 resets = <&gcc WIFI1_CPU_INIT_RESET>, 556 <&gcc WIFI1_RADIO_SRIF_RESET>, 557 <&gcc WIFI1_RADIO_WARM_RESET>, 558 <&gcc WIFI1_RADIO_COLD_RESET>, 559 <&gcc WIFI1_CORE_WARM_RESET>, 560 <&gcc WIFI1_CORE_COLD_RESET>; 561 reset-names = "wifi_cpu_init", "wifi_radio_srif", 562 "wifi_radio_warm", "wifi_radio_cold", 563 "wifi_core_warm", "wifi_core_cold"; 564 clocks = <&gcc GCC_WCSS5G_CLK>, 565 <&gcc GCC_WCSS5G_REF_CLK>, 566 <&gcc GCC_WCSS5G_RTC_CLK>; 567 clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", 568 "wifi_wcss_rtc"; 569 interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, 570 <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>, 571 <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>, 572 <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, 573 <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, 574 <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>, 575 <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>, 576 <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, 577 <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>, 578 <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, 579 <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>, 580 <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>, 581 <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>, 582 <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>, 583 <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>, 584 <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>, 585 <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; 586 interrupt-names = "msi0", "msi1", "msi2", "msi3", 587 "msi4", "msi5", "msi6", "msi7", 588 "msi8", "msi9", "msi10", "msi11", 589 "msi12", "msi13", "msi14", "msi15", 590 "legacy"; 591 status = "disabled"; 592 }; 593 594 mdio: mdio@90000 { 595 #address-cells = <1>; 596 #size-cells = <0>; 597 compatible = "qcom,ipq4019-mdio"; 598 reg = <0x90000 0x64>; 599 status = "disabled"; 600 601 ethphy0: ethernet-phy@0 { 602 reg = <0>; 603 }; 604 605 ethphy1: ethernet-phy@1 { 606 reg = <1>; 607 }; 608 609 ethphy2: ethernet-phy@2 { 610 reg = <2>; 611 }; 612 613 ethphy3: ethernet-phy@3 { 614 reg = <3>; 615 }; 616 617 ethphy4: ethernet-phy@4 { 618 reg = <4>; 619 }; 620 }; 621 622 usb3_ss_phy: usb-phy@9a000 { 623 compatible = "qcom,usb-ss-ipq4019-phy"; 624 #phy-cells = <0>; 625 reg = <0x9a000 0x800>; 626 reg-names = "phy_base"; 627 resets = <&gcc USB3_UNIPHY_PHY_ARES>; 628 reset-names = "por_rst"; 629 status = "disabled"; 630 }; 631 632 usb3_hs_phy: usb-phy@a6000 { 633 compatible = "qcom,usb-hs-ipq4019-phy"; 634 #phy-cells = <0>; 635 reg = <0xa6000 0x40>; 636 reg-names = "phy_base"; 637 resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; 638 reset-names = "por_rst", "srif_rst"; 639 status = "disabled"; 640 }; 641 642 usb3: usb@8af8800 { 643 compatible = "qcom,ipq4019-dwc3", "qcom,dwc3"; 644 reg = <0x8af8800 0x100>; 645 #address-cells = <1>; 646 #size-cells = <1>; 647 clocks = <&gcc GCC_USB3_MASTER_CLK>, 648 <&gcc GCC_USB3_SLEEP_CLK>, 649 <&gcc GCC_USB3_MOCK_UTMI_CLK>; 650 clock-names = "core", "sleep", "mock_utmi"; 651 ranges; 652 status = "disabled"; 653 654 usb3_dwc: usb@8a00000 { 655 compatible = "snps,dwc3"; 656 reg = <0x8a00000 0xf8000>; 657 interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; 658 phys = <&usb3_hs_phy>, <&usb3_ss_phy>; 659 phy-names = "usb2-phy", "usb3-phy"; 660 dr_mode = "host"; 661 }; 662 }; 663 664 usb2_hs_phy: usb-phy@a8000 { 665 compatible = "qcom,usb-hs-ipq4019-phy"; 666 #phy-cells = <0>; 667 reg = <0xa8000 0x40>; 668 reg-names = "phy_base"; 669 resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; 670 reset-names = "por_rst", "srif_rst"; 671 status = "disabled"; 672 }; 673 674 usb2: usb@60f8800 { 675 compatible = "qcom,ipq4019-dwc3", "qcom,dwc3"; 676 reg = <0x60f8800 0x100>; 677 #address-cells = <1>; 678 #size-cells = <1>; 679 clocks = <&gcc GCC_USB2_MASTER_CLK>, 680 <&gcc GCC_USB2_SLEEP_CLK>, 681 <&gcc GCC_USB2_MOCK_UTMI_CLK>; 682 clock-names = "core", "sleep", "mock_utmi"; 683 ranges; 684 status = "disabled"; 685 686 usb@6000000 { 687 compatible = "snps,dwc3"; 688 reg = <0x6000000 0xf8000>; 689 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; 690 phys = <&usb2_hs_phy>; 691 phy-names = "usb2-phy"; 692 dr_mode = "host"; 693 }; 694 }; 695 }; 696}; 697