xref: /linux/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi (revision e7d759f31ca295d589f7420719c311870bb3166f) 
1/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 *
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
6 *
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
14 *
15 */
16
17#include <dt-bindings/gpio/gpio.h>
18#include "qcom-ipq4019.dtsi"
19
20/ {
21	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
22
23	aliases {
24		serial0 = &blsp1_uart1;
25	};
26
27	chosen {
28		stdout-path = "serial0:115200n8";
29	};
30
31	soc {
32		rng@22000 {
33			status = "okay";
34		};
35
36		pinctrl@1000000 {
37			serial_pins: serial_pinmux {
38				mux {
39					pins = "gpio60", "gpio61";
40					function = "blsp_uart0";
41					bias-disable;
42				};
43			};
44
45			spi_0_pins: spi_0_pinmux {
46				pinmux {
47					function = "blsp_spi0";
48					pins = "gpio55", "gpio56", "gpio57";
49				};
50				pinmux_cs {
51					function = "gpio";
52					pins = "gpio54";
53				};
54				pinconf {
55					pins = "gpio55", "gpio56", "gpio57";
56					drive-strength = <12>;
57					bias-disable;
58				};
59				pinconf_cs {
60					pins = "gpio54";
61					drive-strength = <2>;
62					bias-disable;
63					output-high;
64				};
65			};
66		};
67
68		blsp_dma: dma-controller@7884000 {
69			status = "okay";
70		};
71
72		spi@78b5000 {
73			pinctrl-0 = <&spi_0_pins>;
74			pinctrl-names = "default";
75			status = "okay";
76			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
77
78			mx25l25635e@0 {
79				#address-cells = <1>;
80				#size-cells = <1>;
81				reg = <0>;
82				compatible = "mx25l25635e";
83				spi-max-frequency = <24000000>;
84			};
85		};
86
87		serial@78af000 {
88			pinctrl-0 = <&serial_pins>;
89			pinctrl-names = "default";
90			status = "okay";
91		};
92
93		cryptobam: dma-controller@8e04000 {
94			status = "okay";
95		};
96
97		crypto@8e3a000 {
98			status = "okay";
99		};
100
101		watchdog@b017000 {
102			status = "okay";
103		};
104
105		wifi@a000000 {
106			status = "okay";
107		};
108
109		wifi@a800000 {
110			status = "okay";
111		};
112	};
113};
114