1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 3#include "qcom-ipq4019.dtsi" 4#include <dt-bindings/gpio/gpio.h> 5#include <dt-bindings/input/input.h> 6 7/ { 8 model = "ALFA Network AP120C-AC"; 9 compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; 10 11 aliases { 12 serial0 = &blsp1_uart1; 13 }; 14 15 chosen { 16 stdout-path = "serial0:115200n8"; 17 }; 18 19 keys { 20 compatible = "gpio-keys"; 21 22 key-reset { 23 label = "reset"; 24 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; 25 linux,code = <KEY_RESTART>; 26 }; 27 }; 28}; 29 30&tlmm { 31 i2c0_pins: i2c0_pinmux { 32 mux_i2c { 33 function = "blsp_i2c0"; 34 pins = "gpio58", "gpio59"; 35 drive-strength = <16>; 36 bias-disable; 37 }; 38 }; 39 40 mdio_pins: mdio_pinmux { 41 mux_mdio { 42 pins = "gpio53"; 43 function = "mdio"; 44 bias-pull-up; 45 }; 46 47 mux_mdc { 48 pins = "gpio52"; 49 function = "mdc"; 50 bias-pull-up; 51 }; 52 }; 53 54 serial0_pins: serial0_pinmux { 55 mux_uart { 56 pins = "gpio60", "gpio61"; 57 function = "blsp_uart0"; 58 bias-disable; 59 }; 60 }; 61 62 spi0_pins: spi0_pinmux { 63 mux_spi { 64 function = "blsp_spi0"; 65 pins = "gpio55", "gpio56", "gpio57"; 66 drive-strength = <12>; 67 bias-disable; 68 }; 69 70 mux_cs { 71 function = "gpio"; 72 pins = "gpio54", "gpio4"; 73 drive-strength = <2>; 74 bias-disable; 75 output-high; 76 }; 77 }; 78 79 usb-power-hog { 80 line-name = "USB-power"; 81 gpios = <1 GPIO_ACTIVE_HIGH>; 82 gpio-hog; 83 output-high; 84 }; 85}; 86 87&watchdog { 88 status = "okay"; 89}; 90 91&prng { 92 status = "okay"; 93}; 94 95&blsp_dma { 96 status = "okay"; 97}; 98 99&blsp1_i2c3 { 100 status = "okay"; 101 102 pinctrl-0 = <&i2c0_pins>; 103 pinctrl-names = "default"; 104 105 tpm@29 { 106 compatible = "atmel,at97sc3204t"; 107 reg = <0x29>; 108 }; 109}; 110 111&blsp1_spi1 { 112 status = "okay"; 113 114 pinctrl-0 = <&spi0_pins>; 115 pinctrl-names = "default"; 116 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; 117 118 flash@0 { 119 compatible = "jedec,spi-nor"; 120 reg = <0>; 121 spi-max-frequency = <24000000>; 122 123 partitions { 124 compatible = "fixed-partitions"; 125 #address-cells = <1>; 126 #size-cells = <1>; 127 128 partition@0 { 129 label = "SBL1"; 130 reg = <0x00000000 0x00040000>; 131 read-only; 132 }; 133 134 partition@40000 { 135 label = "MIBIB"; 136 reg = <0x00040000 0x00020000>; 137 read-only; 138 }; 139 140 partition@60000 { 141 label = "QSEE"; 142 reg = <0x00060000 0x00060000>; 143 read-only; 144 }; 145 146 partition@c0000 { 147 label = "CDT"; 148 reg = <0x000c0000 0x00010000>; 149 read-only; 150 }; 151 152 partition@d0000 { 153 label = "DDRPARAMS"; 154 reg = <0x000d0000 0x00010000>; 155 read-only; 156 }; 157 158 partition@e0000 { 159 label = "u-boot-env"; 160 reg = <0x000e0000 0x00010000>; 161 }; 162 163 partition@f0000 { 164 label = "u-boot"; 165 reg = <0x000f0000 0x00080000>; 166 read-only; 167 }; 168 169 partition@170000 { 170 label = "ART"; 171 reg = <0x00170000 0x00010000>; 172 read-only; 173 compatible = "nvmem-cells"; 174 #address-cells = <1>; 175 #size-cells = <1>; 176 177 precal_art_1000: precal@1000 { 178 reg = <0x1000 0x2f20>; 179 }; 180 181 precal_art_5000: precal@5000 { 182 reg = <0x5000 0x2f20>; 183 }; 184 }; 185 186 partition@180000 { 187 label = "priv_data1"; 188 reg = <0x00180000 0x00010000>; 189 read-only; 190 }; 191 192 partition@190000 { 193 label = "priv_data2"; 194 reg = <0x00190000 0x00010000>; 195 read-only; 196 }; 197 }; 198 }; 199 200 flash@1 { 201 compatible = "spi-nand"; 202 reg = <1>; 203 spi-max-frequency = <40000000>; 204 205 partitions { 206 compatible = "fixed-partitions"; 207 #address-cells = <1>; 208 #size-cells = <1>; 209 210 partition@0 { 211 label = "ubi1"; 212 reg = <0x00000000 0x04000000>; 213 }; 214 215 partition@4000000 { 216 label = "ubi2"; 217 reg = <0x04000000 0x04000000>; 218 }; 219 }; 220 }; 221}; 222 223&blsp1_uart1 { 224 status = "okay"; 225 226 pinctrl-0 = <&serial0_pins>; 227 pinctrl-names = "default"; 228}; 229 230&cryptobam { 231 status = "okay"; 232}; 233 234&crypto { 235 status = "okay"; 236}; 237 238&mdio { 239 status = "okay"; 240 241 pinctrl-0 = <&mdio_pins>; 242 pinctrl-names = "default"; 243}; 244 245&wifi0 { 246 status = "okay"; 247 nvmem-cell-names = "pre-calibration"; 248 nvmem-cells = <&precal_art_1000>; 249}; 250 251&wifi1 { 252 status = "okay"; 253 nvmem-cell-names = "pre-calibration"; 254 nvmem-cells = <&precal_art_5000>; 255 qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; 256}; 257 258&usb3_hs_phy { 259 status = "okay"; 260}; 261 262&usb3 { 263 status = "okay"; 264 265 }; 266 267&usb3_dwc { 268 phys = <&usb3_hs_phy>; 269 phy-names = "usb2-phy"; 270}; 271 272&usb2_hs_phy { 273 status = "okay"; 274}; 275 276&usb2 { 277 status = "okay"; 278}; 279