1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> 4 */ 5 6/dts-v1/; 7 8#include "qcom-msm8226.dtsi" 9#include "qcom-pm8226.dtsi" 10#include <dt-bindings/input/ti-drv260x.h> 11 12/delete-node/ &adsp_region; 13 14/ { 15 model = "Huawei Watch"; 16 compatible = "huawei,sturgeon", "qcom,apq8026"; 17 chassis-type = "watch"; 18 qcom,msm-id = <199 0x20000>; 19 qcom,board-id = <8 4>; 20 21 reserved-memory { 22 sbl_region: sbl@2f00000 { 23 reg = <0x02f00000 0x100000>; 24 no-map; 25 }; 26 27 external_image_region: external-image@3100000 { 28 reg = <0x3100000 0x200000>; 29 no-map; 30 }; 31 32 peripheral_region: peripheral@3300000 { 33 reg = <0x3300000 0x600000>; 34 no-map; 35 }; 36 37 adsp_region: adsp@3900000 { 38 reg = <0x3900000 0x1400000>; 39 no-map; 40 }; 41 42 modem_region: modem@4d00000 { 43 reg = <0x4d00000 0x1b00000>; 44 no-map; 45 }; 46 47 modem_efs_region: modem-efs@7f00000 { 48 reg = <0x7f00000 0x100000>; 49 no-map; 50 }; 51 }; 52 53 vreg_wlan: wlan-regulator { 54 compatible = "regulator-fixed"; 55 56 regulator-name = "wl-reg"; 57 regulator-min-microvolt = <2950000>; 58 regulator-max-microvolt = <2950000>; 59 60 gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; 61 enable-active-high; 62 63 pinctrl-names = "default"; 64 pinctrl-0 = <&wlan_regulator_default_state>; 65 }; 66}; 67 68&adsp { 69 status = "okay"; 70}; 71 72&blsp1_i2c2 { 73 clock-frequency = <384000>; 74 75 status = "okay"; 76 77 vibrator@5a { 78 compatible = "ti,drv2605"; 79 reg = <0x5a>; 80 enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; 81 82 mode = <DRV260X_ERM_MODE>; 83 library-sel = <DRV260X_ERM_LIB_D>; 84 vib-rated-mv = <2765>; 85 vib-overdrive-mv = <3525>; 86 87 pinctrl-0 = <&vibrator_default_state>; 88 pinctrl-names = "default"; 89 }; 90}; 91 92&blsp1_i2c5 { 93 clock-frequency = <384000>; 94 95 status = "okay"; 96 97 touchscreen@20 { 98 compatible = "syna,rmi4-i2c"; 99 reg = <0x20>; 100 101 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; 102 vdd-supply = <&pm8226_l19>; 103 vio-supply = <&pm8226_lvs1>; 104 105 pinctrl-names = "default"; 106 pinctrl-0 = <&touch_default_state>; 107 108 syna,startup-delay-ms = <160>; 109 110 #address-cells = <1>; 111 #size-cells = <0>; 112 113 rmi4-f01@1 { 114 reg = <0x1>; 115 syna,nosleep-mode = <1>; 116 }; 117 118 rmi4-f12@12 { 119 reg = <0x12>; 120 syna,sensor-type = <1>; 121 }; 122 }; 123}; 124 125&blsp1_uart4 { 126 pinctrl-names = "default"; 127 pinctrl-0 = <&blsp1_uart4_default_state>; 128 129 status = "okay"; 130 131 bluetooth { 132 compatible = "brcm,bcm43430a0-bt"; 133 max-speed = <3000000>; 134 135 pinctrl-names = "default"; 136 pinctrl-0 = <&bluetooth_default_state>; 137 138 host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; 139 device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; 140 shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; 141 }; 142}; 143 144&rpm_requests { 145 regulators { 146 compatible = "qcom,rpm-pm8226-regulators"; 147 148 pm8226_s3: s3 { 149 regulator-min-microvolt = <1200000>; 150 regulator-max-microvolt = <1300000>; 151 }; 152 153 pm8226_s4: s4 { 154 regulator-min-microvolt = <1800000>; 155 regulator-max-microvolt = <2200000>; 156 }; 157 158 pm8226_s5: s5 { 159 regulator-min-microvolt = <1150000>; 160 regulator-max-microvolt = <1150000>; 161 }; 162 163 pm8226_l1: l1 { 164 regulator-min-microvolt = <1225000>; 165 regulator-max-microvolt = <1225000>; 166 }; 167 168 pm8226_l2: l2 { 169 regulator-min-microvolt = <1200000>; 170 regulator-max-microvolt = <1200000>; 171 }; 172 173 pm8226_l3: l3 { 174 regulator-min-microvolt = <750000>; 175 regulator-max-microvolt = <1337500>; 176 }; 177 178 pm8226_l4: l4 { 179 regulator-min-microvolt = <1200000>; 180 regulator-max-microvolt = <1200000>; 181 }; 182 183 pm8226_l5: l5 { 184 regulator-min-microvolt = <1200000>; 185 regulator-max-microvolt = <1200000>; 186 }; 187 188 pm8226_l6: l6 { 189 regulator-min-microvolt = <1800000>; 190 regulator-max-microvolt = <1800000>; 191 }; 192 193 pm8226_l7: l7 { 194 regulator-min-microvolt = <1850000>; 195 regulator-max-microvolt = <1850000>; 196 }; 197 198 pm8226_l8: l8 { 199 regulator-min-microvolt = <1800000>; 200 regulator-max-microvolt = <1800000>; 201 }; 202 203 pm8226_l9: l9 { 204 regulator-min-microvolt = <2050000>; 205 regulator-max-microvolt = <2050000>; 206 }; 207 208 pm8226_l10: l10 { 209 regulator-min-microvolt = <1800000>; 210 regulator-max-microvolt = <1800000>; 211 }; 212 213 pm8226_l12: l12 { 214 regulator-min-microvolt = <1800000>; 215 regulator-max-microvolt = <1800000>; 216 }; 217 218 pm8226_l14: l14 { 219 regulator-min-microvolt = <2750000>; 220 regulator-max-microvolt = <2750000>; 221 }; 222 223 pm8226_l15: l15 { 224 regulator-min-microvolt = <2800000>; 225 regulator-max-microvolt = <2800000>; 226 }; 227 228 pm8226_l16: l16 { 229 regulator-min-microvolt = <3000000>; 230 regulator-max-microvolt = <3350000>; 231 }; 232 233 pm8226_l17: l17 { 234 regulator-min-microvolt = <2950000>; 235 regulator-max-microvolt = <2950000>; 236 }; 237 238 pm8226_l18: l18 { 239 regulator-min-microvolt = <2950000>; 240 regulator-max-microvolt = <2950000>; 241 }; 242 243 pm8226_l19: l19 { 244 regulator-min-microvolt = <2850000>; 245 regulator-max-microvolt = <2850000>; 246 }; 247 248 pm8226_l20: l20 { 249 regulator-min-microvolt = <3075000>; 250 regulator-max-microvolt = <3075000>; 251 }; 252 253 pm8226_l21: l21 { 254 regulator-min-microvolt = <1800000>; 255 regulator-max-microvolt = <2950000>; 256 }; 257 258 pm8226_l22: l22 { 259 regulator-min-microvolt = <1800000>; 260 regulator-max-microvolt = <2950000>; 261 }; 262 263 pm8226_l23: l23 { 264 regulator-min-microvolt = <1800000>; 265 regulator-max-microvolt = <2950000>; 266 }; 267 268 pm8226_l24: l24 { 269 regulator-min-microvolt = <1300000>; 270 regulator-max-microvolt = <1350000>; 271 }; 272 273 pm8226_l25: l25 { 274 regulator-min-microvolt = <1775000>; 275 regulator-max-microvolt = <2125000>; 276 }; 277 278 pm8226_l26: l26 { 279 regulator-min-microvolt = <1225000>; 280 regulator-max-microvolt = <1225000>; 281 }; 282 283 pm8226_l27: l27 { 284 regulator-min-microvolt = <2050000>; 285 regulator-max-microvolt = <2050000>; 286 }; 287 288 pm8226_l28: l28 { 289 regulator-min-microvolt = <1800000>; 290 regulator-max-microvolt = <2950000>; 291 }; 292 293 pm8226_lvs1: lvs1 {}; 294 }; 295}; 296 297&sdhc_1 { 298 vmmc-supply = <&pm8226_l17>; 299 vqmmc-supply = <&pm8226_l6>; 300 301 bus-width = <8>; 302 non-removable; 303 304 status = "okay"; 305}; 306 307&sdhc_3 { 308 max-frequency = <100000000>; 309 non-removable; 310 311 vmmc-supply = <&vreg_wlan>; 312 vqmmc-supply = <&pm8226_l6>; 313 314 #address-cells = <1>; 315 #size-cells = <0>; 316 317 status = "okay"; 318 319 wifi@1 { 320 compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; 321 reg = <1>; 322 323 interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; 324 interrupt-names = "host-wake"; 325 326 pinctrl-names = "default"; 327 pinctrl-0 = <&wlan_hostwake_default_state>; 328 }; 329}; 330 331&smbb { 332 qcom,fast-charge-safe-voltage = <4370000>; 333 qcom,fast-charge-high-threshold-voltage = <4350000>; 334 qcom,minimum-input-voltage = <4350000>; 335 qcom,fast-charge-current-limit = <300000>; 336 qcom,fast-charge-safe-current = <600000>; 337 qcom,auto-recharge-threshold-voltage = <4240000>; 338}; 339 340&tlmm { 341 blsp1_uart4_default_state: blsp1-uart4-default-state { 342 pins = "gpio12", "gpio13", "gpio14", "gpio15"; 343 function = "blsp_uart4"; 344 drive-strength = <8>; 345 bias-disable; 346 }; 347 348 bluetooth_default_state: bluetooth-default-state { 349 pins = "gpio63", "gpio64"; 350 function = "gpio"; 351 drive-strength = <2>; 352 bias-pull-down; 353 }; 354 355 touch_default_state: touch-default-state { 356 irq-pins { 357 pins = "gpio17"; 358 function = "gpio"; 359 drive-strength = <8>; 360 bias-pull-up; 361 }; 362 363 reset-pins { 364 pins = "gpio16"; 365 function = "gpio"; 366 drive-strength = <6>; 367 bias-pull-up; 368 }; 369 }; 370 371 vibrator_default_state: vibrator-default-state { 372 pins = "gpio59", "gpio60"; 373 function = "gpio"; 374 drive-strength = <2>; 375 bias-pull-down; 376 }; 377 378 wlan_hostwake_default_state: wlan-hostwake-default-state { 379 pins = "gpio66"; 380 function = "gpio"; 381 drive-strength = <2>; 382 bias-disable; 383 }; 384 385 wlan_regulator_default_state: wlan-regulator-default-state { 386 pins = "gpio110"; 387 function = "gpio"; 388 drive-strength = <2>; 389 bias-pull-down; 390 }; 391}; 392 393&usb { 394 extcon = <&smbb>; 395 dr_mode = "peripheral"; 396 status = "okay"; 397}; 398 399&usb_hs_phy { 400 extcon = <&smbb>; 401 v1p8-supply = <&pm8226_l10>; 402 v3p3-supply = <&pm8226_l20>; 403}; 404