1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2012 Freescale Semiconductor, Inc. 4 5#include <dt-bindings/gpio/gpio.h> 6#include "imx28-pinfunc.h" 7 8/ { 9 #address-cells = <1>; 10 #size-cells = <1>; 11 12 interrupt-parent = <&icoll>; 13 /* 14 * The decompressor and also some bootloaders rely on a 15 * pre-existing /chosen node to be available to insert the 16 * command line and merge other ATAGS info. 17 */ 18 chosen {}; 19 20 aliases { 21 ethernet0 = &mac0; 22 ethernet1 = &mac1; 23 gpio0 = &gpio0; 24 gpio1 = &gpio1; 25 gpio2 = &gpio2; 26 gpio3 = &gpio3; 27 gpio4 = &gpio4; 28 saif0 = &saif0; 29 saif1 = &saif1; 30 serial0 = &auart0; 31 serial1 = &auart1; 32 serial2 = &auart2; 33 serial3 = &auart3; 34 serial4 = &auart4; 35 spi0 = &ssp1; 36 spi1 = &ssp2; 37 usbphy0 = &usbphy0; 38 usbphy1 = &usbphy1; 39 }; 40 41 cpus { 42 #address-cells = <1>; 43 #size-cells = <0>; 44 45 cpu@0 { 46 compatible = "arm,arm926ej-s"; 47 device_type = "cpu"; 48 reg = <0>; 49 }; 50 }; 51 52 apb@80000000 { 53 compatible = "simple-bus"; 54 #address-cells = <1>; 55 #size-cells = <1>; 56 reg = <0x80000000 0x80000>; 57 ranges; 58 59 apbh-bus@80000000 { 60 compatible = "simple-bus"; 61 #address-cells = <1>; 62 #size-cells = <1>; 63 reg = <0x80000000 0x3c900>; 64 ranges; 65 66 icoll: interrupt-controller@80000000 { 67 compatible = "fsl,imx28-icoll", "fsl,icoll"; 68 interrupt-controller; 69 #interrupt-cells = <1>; 70 reg = <0x80000000 0x2000>; 71 }; 72 73 hsadc: hsadc@80002000 { 74 reg = <0x80002000 0x2000>; 75 interrupts = <13>; 76 dmas = <&dma_apbh 12>; 77 dma-names = "rx"; 78 status = "disabled"; 79 }; 80 81 dma_apbh: dma-controller@80004000 { 82 compatible = "fsl,imx28-dma-apbh"; 83 reg = <0x80004000 0x2000>; 84 interrupts = <82>, <83>, <84>, <85>, 85 <88>, <88>, <88>, <88>, 86 <88>, <88>, <88>, <88>, 87 <87>, <86>, <0>, <0>; 88 #dma-cells = <1>; 89 dma-channels = <16>; 90 clocks = <&clks 25>; 91 }; 92 93 perfmon: perfmon@80006000 { 94 reg = <0x80006000 0x800>; 95 interrupts = <27>; 96 status = "disabled"; 97 }; 98 99 gpmi: nand-controller@8000c000 { 100 compatible = "fsl,imx28-gpmi-nand"; 101 #address-cells = <1>; 102 #size-cells = <1>; 103 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; 104 reg-names = "gpmi-nand", "bch"; 105 interrupts = <41>; 106 interrupt-names = "bch"; 107 clocks = <&clks 50>; 108 clock-names = "gpmi_io"; 109 assigned-clocks = <&clks 13>; 110 assigned-clock-parents = <&clks 10>; 111 dmas = <&dma_apbh 4>; 112 dma-names = "rx-tx"; 113 status = "disabled"; 114 }; 115 116 ssp0: spi@80010000 { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 reg = <0x80010000 0x2000>; 120 interrupts = <96>; 121 clocks = <&clks 46>; 122 dmas = <&dma_apbh 0>; 123 dma-names = "rx-tx"; 124 status = "disabled"; 125 }; 126 127 ssp1: spi@80012000 { 128 #address-cells = <1>; 129 #size-cells = <0>; 130 reg = <0x80012000 0x2000>; 131 interrupts = <97>; 132 clocks = <&clks 47>; 133 dmas = <&dma_apbh 1>; 134 dma-names = "rx-tx"; 135 status = "disabled"; 136 }; 137 138 ssp2: spi@80014000 { 139 #address-cells = <1>; 140 #size-cells = <0>; 141 reg = <0x80014000 0x2000>; 142 interrupts = <98>; 143 clocks = <&clks 48>; 144 dmas = <&dma_apbh 2>; 145 dma-names = "rx-tx"; 146 status = "disabled"; 147 }; 148 149 ssp3: spi@80016000 { 150 #address-cells = <1>; 151 #size-cells = <0>; 152 reg = <0x80016000 0x2000>; 153 interrupts = <99>; 154 clocks = <&clks 49>; 155 dmas = <&dma_apbh 3>; 156 dma-names = "rx-tx"; 157 status = "disabled"; 158 }; 159 160 pinctrl: pinctrl@80018000 { 161 #address-cells = <1>; 162 #size-cells = <0>; 163 compatible = "fsl,imx28-pinctrl", "simple-bus"; 164 reg = <0x80018000 0x2000>; 165 166 gpio0: gpio@0 { 167 compatible = "fsl,imx28-gpio"; 168 reg = <0>; 169 interrupts = <127>; 170 gpio-controller; 171 #gpio-cells = <2>; 172 interrupt-controller; 173 #interrupt-cells = <2>; 174 }; 175 176 gpio1: gpio@1 { 177 compatible = "fsl,imx28-gpio"; 178 reg = <1>; 179 interrupts = <126>; 180 gpio-controller; 181 #gpio-cells = <2>; 182 interrupt-controller; 183 #interrupt-cells = <2>; 184 }; 185 186 gpio2: gpio@2 { 187 compatible = "fsl,imx28-gpio"; 188 reg = <2>; 189 interrupts = <125>; 190 gpio-controller; 191 #gpio-cells = <2>; 192 interrupt-controller; 193 #interrupt-cells = <2>; 194 }; 195 196 gpio3: gpio@3 { 197 compatible = "fsl,imx28-gpio"; 198 reg = <3>; 199 interrupts = <124>; 200 gpio-controller; 201 #gpio-cells = <2>; 202 interrupt-controller; 203 #interrupt-cells = <2>; 204 }; 205 206 gpio4: gpio@4 { 207 compatible = "fsl,imx28-gpio"; 208 reg = <4>; 209 interrupts = <123>; 210 gpio-controller; 211 #gpio-cells = <2>; 212 interrupt-controller; 213 #interrupt-cells = <2>; 214 }; 215 216 duart_pins_a: duart@0 { 217 reg = <0>; 218 fsl,pinmux-ids = < 219 MX28_PAD_PWM0__DUART_RX 220 MX28_PAD_PWM1__DUART_TX 221 >; 222 fsl,drive-strength = <MXS_DRIVE_4mA>; 223 fsl,voltage = <MXS_VOLTAGE_HIGH>; 224 fsl,pull-up = <MXS_PULL_DISABLE>; 225 }; 226 227 duart_pins_b: duart@1 { 228 reg = <1>; 229 fsl,pinmux-ids = < 230 MX28_PAD_AUART0_CTS__DUART_RX 231 MX28_PAD_AUART0_RTS__DUART_TX 232 >; 233 fsl,drive-strength = <MXS_DRIVE_4mA>; 234 fsl,voltage = <MXS_VOLTAGE_HIGH>; 235 fsl,pull-up = <MXS_PULL_DISABLE>; 236 }; 237 238 duart_4pins_a: duart-4pins@0 { 239 reg = <0>; 240 fsl,pinmux-ids = < 241 MX28_PAD_AUART0_CTS__DUART_RX 242 MX28_PAD_AUART0_RTS__DUART_TX 243 MX28_PAD_AUART0_RX__DUART_CTS 244 MX28_PAD_AUART0_TX__DUART_RTS 245 >; 246 fsl,drive-strength = <MXS_DRIVE_4mA>; 247 fsl,voltage = <MXS_VOLTAGE_HIGH>; 248 fsl,pull-up = <MXS_PULL_DISABLE>; 249 }; 250 251 gpmi_pins_a: gpmi-nand@0 { 252 reg = <0>; 253 fsl,pinmux-ids = < 254 MX28_PAD_GPMI_D00__GPMI_D0 255 MX28_PAD_GPMI_D01__GPMI_D1 256 MX28_PAD_GPMI_D02__GPMI_D2 257 MX28_PAD_GPMI_D03__GPMI_D3 258 MX28_PAD_GPMI_D04__GPMI_D4 259 MX28_PAD_GPMI_D05__GPMI_D5 260 MX28_PAD_GPMI_D06__GPMI_D6 261 MX28_PAD_GPMI_D07__GPMI_D7 262 MX28_PAD_GPMI_CE0N__GPMI_CE0N 263 MX28_PAD_GPMI_RDY0__GPMI_READY0 264 MX28_PAD_GPMI_RDN__GPMI_RDN 265 MX28_PAD_GPMI_WRN__GPMI_WRN 266 MX28_PAD_GPMI_ALE__GPMI_ALE 267 MX28_PAD_GPMI_CLE__GPMI_CLE 268 MX28_PAD_GPMI_RESETN__GPMI_RESETN 269 >; 270 fsl,drive-strength = <MXS_DRIVE_4mA>; 271 fsl,voltage = <MXS_VOLTAGE_HIGH>; 272 fsl,pull-up = <MXS_PULL_DISABLE>; 273 }; 274 275 gpmi_status_cfg: gpmi-status-cfg@0 { 276 reg = <0>; 277 fsl,pinmux-ids = < 278 MX28_PAD_GPMI_RDN__GPMI_RDN 279 MX28_PAD_GPMI_WRN__GPMI_WRN 280 MX28_PAD_GPMI_RESETN__GPMI_RESETN 281 >; 282 fsl,drive-strength = <MXS_DRIVE_12mA>; 283 }; 284 285 auart0_pins_a: auart0@0 { 286 reg = <0>; 287 fsl,pinmux-ids = < 288 MX28_PAD_AUART0_RX__AUART0_RX 289 MX28_PAD_AUART0_TX__AUART0_TX 290 MX28_PAD_AUART0_CTS__AUART0_CTS 291 MX28_PAD_AUART0_RTS__AUART0_RTS 292 >; 293 fsl,drive-strength = <MXS_DRIVE_4mA>; 294 fsl,voltage = <MXS_VOLTAGE_HIGH>; 295 fsl,pull-up = <MXS_PULL_DISABLE>; 296 }; 297 298 auart0_2pins_a: auart0-2pins@0 { 299 reg = <0>; 300 fsl,pinmux-ids = < 301 MX28_PAD_AUART0_RX__AUART0_RX 302 MX28_PAD_AUART0_TX__AUART0_TX 303 >; 304 fsl,drive-strength = <MXS_DRIVE_4mA>; 305 fsl,voltage = <MXS_VOLTAGE_HIGH>; 306 fsl,pull-up = <MXS_PULL_DISABLE>; 307 }; 308 309 auart1_pins_a: auart1@0 { 310 reg = <0>; 311 fsl,pinmux-ids = < 312 MX28_PAD_AUART1_RX__AUART1_RX 313 MX28_PAD_AUART1_TX__AUART1_TX 314 MX28_PAD_AUART1_CTS__AUART1_CTS 315 MX28_PAD_AUART1_RTS__AUART1_RTS 316 >; 317 fsl,drive-strength = <MXS_DRIVE_4mA>; 318 fsl,voltage = <MXS_VOLTAGE_HIGH>; 319 fsl,pull-up = <MXS_PULL_DISABLE>; 320 }; 321 322 auart1_2pins_a: auart1-2pins@0 { 323 reg = <0>; 324 fsl,pinmux-ids = < 325 MX28_PAD_AUART1_RX__AUART1_RX 326 MX28_PAD_AUART1_TX__AUART1_TX 327 >; 328 fsl,drive-strength = <MXS_DRIVE_4mA>; 329 fsl,voltage = <MXS_VOLTAGE_HIGH>; 330 fsl,pull-up = <MXS_PULL_DISABLE>; 331 }; 332 333 auart2_2pins_a: auart2-2pins@0 { 334 reg = <0>; 335 fsl,pinmux-ids = < 336 MX28_PAD_SSP2_SCK__AUART2_RX 337 MX28_PAD_SSP2_MOSI__AUART2_TX 338 >; 339 fsl,drive-strength = <MXS_DRIVE_4mA>; 340 fsl,voltage = <MXS_VOLTAGE_HIGH>; 341 fsl,pull-up = <MXS_PULL_DISABLE>; 342 }; 343 344 auart2_2pins_b: auart2-2pins@1 { 345 reg = <1>; 346 fsl,pinmux-ids = < 347 MX28_PAD_AUART2_RX__AUART2_RX 348 MX28_PAD_AUART2_TX__AUART2_TX 349 >; 350 fsl,drive-strength = <MXS_DRIVE_4mA>; 351 fsl,voltage = <MXS_VOLTAGE_HIGH>; 352 fsl,pull-up = <MXS_PULL_DISABLE>; 353 }; 354 355 auart2_pins_a: auart2-pins@0 { 356 reg = <0>; 357 fsl,pinmux-ids = < 358 MX28_PAD_AUART2_RX__AUART2_RX 359 MX28_PAD_AUART2_TX__AUART2_TX 360 MX28_PAD_AUART2_CTS__AUART2_CTS 361 MX28_PAD_AUART2_RTS__AUART2_RTS 362 >; 363 fsl,drive-strength = <MXS_DRIVE_4mA>; 364 fsl,voltage = <MXS_VOLTAGE_HIGH>; 365 fsl,pull-up = <MXS_PULL_DISABLE>; 366 }; 367 368 auart3_pins_a: auart3@0 { 369 reg = <0>; 370 fsl,pinmux-ids = < 371 MX28_PAD_AUART3_RX__AUART3_RX 372 MX28_PAD_AUART3_TX__AUART3_TX 373 MX28_PAD_AUART3_CTS__AUART3_CTS 374 MX28_PAD_AUART3_RTS__AUART3_RTS 375 >; 376 fsl,drive-strength = <MXS_DRIVE_4mA>; 377 fsl,voltage = <MXS_VOLTAGE_HIGH>; 378 fsl,pull-up = <MXS_PULL_DISABLE>; 379 }; 380 381 auart3_2pins_a: auart3-2pins@0 { 382 reg = <0>; 383 fsl,pinmux-ids = < 384 MX28_PAD_SSP2_MISO__AUART3_RX 385 MX28_PAD_SSP2_SS0__AUART3_TX 386 >; 387 fsl,drive-strength = <MXS_DRIVE_4mA>; 388 fsl,voltage = <MXS_VOLTAGE_HIGH>; 389 fsl,pull-up = <MXS_PULL_DISABLE>; 390 }; 391 392 auart3_2pins_b: auart3-2pins@1 { 393 reg = <1>; 394 fsl,pinmux-ids = < 395 MX28_PAD_AUART3_RX__AUART3_RX 396 MX28_PAD_AUART3_TX__AUART3_TX 397 >; 398 fsl,drive-strength = <MXS_DRIVE_4mA>; 399 fsl,voltage = <MXS_VOLTAGE_HIGH>; 400 fsl,pull-up = <MXS_PULL_DISABLE>; 401 }; 402 403 auart4_2pins_a: auart4@0 { 404 reg = <0>; 405 fsl,pinmux-ids = < 406 MX28_PAD_SSP3_SCK__AUART4_TX 407 MX28_PAD_SSP3_MOSI__AUART4_RX 408 >; 409 fsl,drive-strength = <MXS_DRIVE_4mA>; 410 fsl,voltage = <MXS_VOLTAGE_HIGH>; 411 fsl,pull-up = <MXS_PULL_DISABLE>; 412 }; 413 414 auart4_2pins_b: auart4@1 { 415 reg = <1>; 416 fsl,pinmux-ids = < 417 MX28_PAD_AUART0_CTS__AUART4_RX 418 MX28_PAD_AUART0_RTS__AUART4_TX 419 >; 420 fsl,drive-strength = <MXS_DRIVE_4mA>; 421 fsl,voltage = <MXS_VOLTAGE_HIGH>; 422 fsl,pull-up = <MXS_PULL_DISABLE>; 423 }; 424 425 mac0_pins_a: mac0@0 { 426 reg = <0>; 427 fsl,pinmux-ids = < 428 MX28_PAD_ENET0_MDC__ENET0_MDC 429 MX28_PAD_ENET0_MDIO__ENET0_MDIO 430 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 431 MX28_PAD_ENET0_RXD0__ENET0_RXD0 432 MX28_PAD_ENET0_RXD1__ENET0_RXD1 433 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 434 MX28_PAD_ENET0_TXD0__ENET0_TXD0 435 MX28_PAD_ENET0_TXD1__ENET0_TXD1 436 MX28_PAD_ENET_CLK__CLKCTRL_ENET 437 >; 438 fsl,drive-strength = <MXS_DRIVE_8mA>; 439 fsl,voltage = <MXS_VOLTAGE_HIGH>; 440 fsl,pull-up = <MXS_PULL_ENABLE>; 441 }; 442 443 mac0_pins_b: mac0@1 { 444 reg = <1>; 445 fsl,pinmux-ids = < 446 MX28_PAD_ENET0_MDC__ENET0_MDC 447 MX28_PAD_ENET0_MDIO__ENET0_MDIO 448 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 449 MX28_PAD_ENET0_RXD0__ENET0_RXD0 450 MX28_PAD_ENET0_RXD1__ENET0_RXD1 451 MX28_PAD_ENET0_RXD2__ENET0_RXD2 452 MX28_PAD_ENET0_RXD3__ENET0_RXD3 453 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 454 MX28_PAD_ENET0_TXD0__ENET0_TXD0 455 MX28_PAD_ENET0_TXD1__ENET0_TXD1 456 MX28_PAD_ENET0_TXD2__ENET0_TXD2 457 MX28_PAD_ENET0_TXD3__ENET0_TXD3 458 MX28_PAD_ENET_CLK__CLKCTRL_ENET 459 MX28_PAD_ENET0_COL__ENET0_COL 460 MX28_PAD_ENET0_CRS__ENET0_CRS 461 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 462 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 463 >; 464 fsl,drive-strength = <MXS_DRIVE_8mA>; 465 fsl,voltage = <MXS_VOLTAGE_HIGH>; 466 fsl,pull-up = <MXS_PULL_ENABLE>; 467 }; 468 469 mac1_pins_a: mac1@0 { 470 reg = <0>; 471 fsl,pinmux-ids = < 472 MX28_PAD_ENET0_CRS__ENET1_RX_EN 473 MX28_PAD_ENET0_RXD2__ENET1_RXD0 474 MX28_PAD_ENET0_RXD3__ENET1_RXD1 475 MX28_PAD_ENET0_COL__ENET1_TX_EN 476 MX28_PAD_ENET0_TXD2__ENET1_TXD0 477 MX28_PAD_ENET0_TXD3__ENET1_TXD1 478 >; 479 fsl,drive-strength = <MXS_DRIVE_8mA>; 480 fsl,voltage = <MXS_VOLTAGE_HIGH>; 481 fsl,pull-up = <MXS_PULL_ENABLE>; 482 }; 483 484 mmc0_8bit_pins_a: mmc0-8bit@0 { 485 reg = <0>; 486 fsl,pinmux-ids = < 487 MX28_PAD_SSP0_DATA0__SSP0_D0 488 MX28_PAD_SSP0_DATA1__SSP0_D1 489 MX28_PAD_SSP0_DATA2__SSP0_D2 490 MX28_PAD_SSP0_DATA3__SSP0_D3 491 MX28_PAD_SSP0_DATA4__SSP0_D4 492 MX28_PAD_SSP0_DATA5__SSP0_D5 493 MX28_PAD_SSP0_DATA6__SSP0_D6 494 MX28_PAD_SSP0_DATA7__SSP0_D7 495 MX28_PAD_SSP0_CMD__SSP0_CMD 496 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 497 MX28_PAD_SSP0_SCK__SSP0_SCK 498 >; 499 fsl,drive-strength = <MXS_DRIVE_8mA>; 500 fsl,voltage = <MXS_VOLTAGE_HIGH>; 501 fsl,pull-up = <MXS_PULL_ENABLE>; 502 }; 503 504 mmc0_4bit_pins_a: mmc0-4bit@0 { 505 reg = <0>; 506 fsl,pinmux-ids = < 507 MX28_PAD_SSP0_DATA0__SSP0_D0 508 MX28_PAD_SSP0_DATA1__SSP0_D1 509 MX28_PAD_SSP0_DATA2__SSP0_D2 510 MX28_PAD_SSP0_DATA3__SSP0_D3 511 MX28_PAD_SSP0_CMD__SSP0_CMD 512 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 513 MX28_PAD_SSP0_SCK__SSP0_SCK 514 >; 515 fsl,drive-strength = <MXS_DRIVE_8mA>; 516 fsl,voltage = <MXS_VOLTAGE_HIGH>; 517 fsl,pull-up = <MXS_PULL_ENABLE>; 518 }; 519 520 mmc0_cd_cfg: mmc0-cd-cfg@0 { 521 reg = <0>; 522 fsl,pinmux-ids = < 523 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 524 >; 525 fsl,pull-up = <MXS_PULL_DISABLE>; 526 }; 527 528 mmc0_sck_cfg: mmc0-sck-cfg@0 { 529 reg = <0>; 530 fsl,pinmux-ids = < 531 MX28_PAD_SSP0_SCK__SSP0_SCK 532 >; 533 fsl,drive-strength = <MXS_DRIVE_12mA>; 534 fsl,pull-up = <MXS_PULL_DISABLE>; 535 }; 536 537 mmc1_4bit_pins_a: mmc1-4bit@0 { 538 reg = <0>; 539 fsl,pinmux-ids = < 540 MX28_PAD_GPMI_D00__SSP1_D0 541 MX28_PAD_GPMI_D01__SSP1_D1 542 MX28_PAD_GPMI_D02__SSP1_D2 543 MX28_PAD_GPMI_D03__SSP1_D3 544 MX28_PAD_GPMI_RDY1__SSP1_CMD 545 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 546 MX28_PAD_GPMI_WRN__SSP1_SCK 547 >; 548 fsl,drive-strength = <MXS_DRIVE_8mA>; 549 fsl,voltage = <MXS_VOLTAGE_HIGH>; 550 fsl,pull-up = <MXS_PULL_ENABLE>; 551 }; 552 553 mmc1_cd_cfg: mmc1-cd-cfg@0 { 554 reg = <0>; 555 fsl,pinmux-ids = < 556 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 557 >; 558 fsl,pull-up = <MXS_PULL_DISABLE>; 559 }; 560 561 mmc1_sck_cfg: mmc1-sck-cfg@0 { 562 reg = <0>; 563 fsl,pinmux-ids = < 564 MX28_PAD_GPMI_WRN__SSP1_SCK 565 >; 566 fsl,drive-strength = <MXS_DRIVE_12mA>; 567 fsl,pull-up = <MXS_PULL_DISABLE>; 568 }; 569 570 571 mmc2_4bit_pins_a: mmc2-4bit@0 { 572 reg = <0>; 573 fsl,pinmux-ids = < 574 MX28_PAD_SSP0_DATA4__SSP2_D0 575 MX28_PAD_SSP1_SCK__SSP2_D1 576 MX28_PAD_SSP1_CMD__SSP2_D2 577 MX28_PAD_SSP0_DATA5__SSP2_D3 578 MX28_PAD_SSP0_DATA6__SSP2_CMD 579 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 580 MX28_PAD_SSP0_DATA7__SSP2_SCK 581 >; 582 fsl,drive-strength = <MXS_DRIVE_8mA>; 583 fsl,voltage = <MXS_VOLTAGE_HIGH>; 584 fsl,pull-up = <MXS_PULL_ENABLE>; 585 }; 586 587 mmc2_4bit_pins_b: mmc2-4bit@1 { 588 reg = <1>; 589 fsl,pinmux-ids = < 590 MX28_PAD_SSP2_SCK__SSP2_SCK 591 MX28_PAD_SSP2_MOSI__SSP2_CMD 592 MX28_PAD_SSP2_MISO__SSP2_D0 593 MX28_PAD_SSP2_SS0__SSP2_D3 594 MX28_PAD_SSP2_SS1__SSP2_D1 595 MX28_PAD_SSP2_SS2__SSP2_D2 596 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 597 >; 598 fsl,drive-strength = <MXS_DRIVE_8mA>; 599 fsl,voltage = <MXS_VOLTAGE_HIGH>; 600 fsl,pull-up = <MXS_PULL_ENABLE>; 601 }; 602 603 mmc2_cd_cfg: mmc2-cd-cfg@0 { 604 reg = <0>; 605 fsl,pinmux-ids = < 606 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 607 >; 608 fsl,pull-up = <MXS_PULL_DISABLE>; 609 }; 610 611 mmc2_sck_cfg_a: mmc2-sck-cfg@0 { 612 reg = <0>; 613 fsl,pinmux-ids = < 614 MX28_PAD_SSP0_DATA7__SSP2_SCK 615 >; 616 fsl,drive-strength = <MXS_DRIVE_12mA>; 617 fsl,pull-up = <MXS_PULL_DISABLE>; 618 }; 619 620 mmc2_sck_cfg_b: mmc2-sck-cfg@1 { 621 reg = <1>; 622 fsl,pinmux-ids = < 623 MX28_PAD_SSP2_SCK__SSP2_SCK 624 >; 625 fsl,drive-strength = <MXS_DRIVE_12mA>; 626 fsl,pull-up = <MXS_PULL_DISABLE>; 627 }; 628 629 i2c0_pins_a: i2c0@0 { 630 reg = <0>; 631 fsl,pinmux-ids = < 632 MX28_PAD_I2C0_SCL__I2C0_SCL 633 MX28_PAD_I2C0_SDA__I2C0_SDA 634 >; 635 fsl,drive-strength = <MXS_DRIVE_8mA>; 636 fsl,voltage = <MXS_VOLTAGE_HIGH>; 637 fsl,pull-up = <MXS_PULL_ENABLE>; 638 }; 639 640 i2c0_pins_b: i2c0@1 { 641 reg = <1>; 642 fsl,pinmux-ids = < 643 MX28_PAD_AUART0_RX__I2C0_SCL 644 MX28_PAD_AUART0_TX__I2C0_SDA 645 >; 646 fsl,drive-strength = <MXS_DRIVE_8mA>; 647 fsl,voltage = <MXS_VOLTAGE_HIGH>; 648 fsl,pull-up = <MXS_PULL_ENABLE>; 649 }; 650 651 i2c1_pins_a: i2c1@0 { 652 reg = <0>; 653 fsl,pinmux-ids = < 654 MX28_PAD_PWM0__I2C1_SCL 655 MX28_PAD_PWM1__I2C1_SDA 656 >; 657 fsl,drive-strength = <MXS_DRIVE_8mA>; 658 fsl,voltage = <MXS_VOLTAGE_HIGH>; 659 fsl,pull-up = <MXS_PULL_ENABLE>; 660 }; 661 662 i2c1_pins_b: i2c1@1 { 663 reg = <1>; 664 fsl,pinmux-ids = < 665 MX28_PAD_AUART2_CTS__I2C1_SCL 666 MX28_PAD_AUART2_RTS__I2C1_SDA 667 >; 668 fsl,drive-strength = <MXS_DRIVE_8mA>; 669 fsl,voltage = <MXS_VOLTAGE_HIGH>; 670 fsl,pull-up = <MXS_PULL_ENABLE>; 671 }; 672 673 saif0_pins_a: saif0@0 { 674 reg = <0>; 675 fsl,pinmux-ids = < 676 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 677 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 678 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 679 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 680 >; 681 fsl,drive-strength = <MXS_DRIVE_12mA>; 682 fsl,voltage = <MXS_VOLTAGE_HIGH>; 683 fsl,pull-up = <MXS_PULL_ENABLE>; 684 }; 685 686 saif0_pins_b: saif0@1 { 687 reg = <1>; 688 fsl,pinmux-ids = < 689 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 690 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 691 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 692 >; 693 fsl,drive-strength = <MXS_DRIVE_12mA>; 694 fsl,voltage = <MXS_VOLTAGE_HIGH>; 695 fsl,pull-up = <MXS_PULL_ENABLE>; 696 }; 697 698 saif1_pins_a: saif1@0 { 699 reg = <0>; 700 fsl,pinmux-ids = < 701 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 702 >; 703 fsl,drive-strength = <MXS_DRIVE_12mA>; 704 fsl,voltage = <MXS_VOLTAGE_HIGH>; 705 fsl,pull-up = <MXS_PULL_ENABLE>; 706 }; 707 708 pwm0_pins_a: pwm0@0 { 709 reg = <0>; 710 fsl,pinmux-ids = < 711 MX28_PAD_PWM0__PWM_0 712 >; 713 fsl,drive-strength = <MXS_DRIVE_4mA>; 714 fsl,voltage = <MXS_VOLTAGE_HIGH>; 715 fsl,pull-up = <MXS_PULL_DISABLE>; 716 }; 717 718 pwm2_pins_a: pwm2@0 { 719 reg = <0>; 720 fsl,pinmux-ids = < 721 MX28_PAD_PWM2__PWM_2 722 >; 723 fsl,drive-strength = <MXS_DRIVE_4mA>; 724 fsl,voltage = <MXS_VOLTAGE_HIGH>; 725 fsl,pull-up = <MXS_PULL_DISABLE>; 726 }; 727 728 pwm3_pins_a: pwm3@0 { 729 reg = <0>; 730 fsl,pinmux-ids = < 731 MX28_PAD_PWM3__PWM_3 732 >; 733 fsl,drive-strength = <MXS_DRIVE_4mA>; 734 fsl,voltage = <MXS_VOLTAGE_HIGH>; 735 fsl,pull-up = <MXS_PULL_DISABLE>; 736 }; 737 738 pwm3_pins_b: pwm3@1 { 739 reg = <1>; 740 fsl,pinmux-ids = < 741 MX28_PAD_SAIF0_MCLK__PWM_3 742 >; 743 fsl,drive-strength = <MXS_DRIVE_4mA>; 744 fsl,voltage = <MXS_VOLTAGE_HIGH>; 745 fsl,pull-up = <MXS_PULL_DISABLE>; 746 }; 747 748 pwm4_pins_a: pwm4@0 { 749 reg = <0>; 750 fsl,pinmux-ids = < 751 MX28_PAD_PWM4__PWM_4 752 >; 753 fsl,drive-strength = <MXS_DRIVE_4mA>; 754 fsl,voltage = <MXS_VOLTAGE_HIGH>; 755 fsl,pull-up = <MXS_PULL_DISABLE>; 756 }; 757 758 lcdif_24bit_pins_a: lcdif-24bit@0 { 759 reg = <0>; 760 fsl,pinmux-ids = < 761 MX28_PAD_LCD_D00__LCD_D0 762 MX28_PAD_LCD_D01__LCD_D1 763 MX28_PAD_LCD_D02__LCD_D2 764 MX28_PAD_LCD_D03__LCD_D3 765 MX28_PAD_LCD_D04__LCD_D4 766 MX28_PAD_LCD_D05__LCD_D5 767 MX28_PAD_LCD_D06__LCD_D6 768 MX28_PAD_LCD_D07__LCD_D7 769 MX28_PAD_LCD_D08__LCD_D8 770 MX28_PAD_LCD_D09__LCD_D9 771 MX28_PAD_LCD_D10__LCD_D10 772 MX28_PAD_LCD_D11__LCD_D11 773 MX28_PAD_LCD_D12__LCD_D12 774 MX28_PAD_LCD_D13__LCD_D13 775 MX28_PAD_LCD_D14__LCD_D14 776 MX28_PAD_LCD_D15__LCD_D15 777 MX28_PAD_LCD_D16__LCD_D16 778 MX28_PAD_LCD_D17__LCD_D17 779 MX28_PAD_LCD_D18__LCD_D18 780 MX28_PAD_LCD_D19__LCD_D19 781 MX28_PAD_LCD_D20__LCD_D20 782 MX28_PAD_LCD_D21__LCD_D21 783 MX28_PAD_LCD_D22__LCD_D22 784 MX28_PAD_LCD_D23__LCD_D23 785 >; 786 fsl,drive-strength = <MXS_DRIVE_4mA>; 787 fsl,voltage = <MXS_VOLTAGE_HIGH>; 788 fsl,pull-up = <MXS_PULL_DISABLE>; 789 }; 790 791 lcdif_18bit_pins_a: lcdif-18bit@0 { 792 reg = <0>; 793 fsl,pinmux-ids = < 794 MX28_PAD_LCD_D00__LCD_D0 795 MX28_PAD_LCD_D01__LCD_D1 796 MX28_PAD_LCD_D02__LCD_D2 797 MX28_PAD_LCD_D03__LCD_D3 798 MX28_PAD_LCD_D04__LCD_D4 799 MX28_PAD_LCD_D05__LCD_D5 800 MX28_PAD_LCD_D06__LCD_D6 801 MX28_PAD_LCD_D07__LCD_D7 802 MX28_PAD_LCD_D08__LCD_D8 803 MX28_PAD_LCD_D09__LCD_D9 804 MX28_PAD_LCD_D10__LCD_D10 805 MX28_PAD_LCD_D11__LCD_D11 806 MX28_PAD_LCD_D12__LCD_D12 807 MX28_PAD_LCD_D13__LCD_D13 808 MX28_PAD_LCD_D14__LCD_D14 809 MX28_PAD_LCD_D15__LCD_D15 810 MX28_PAD_LCD_D16__LCD_D16 811 MX28_PAD_LCD_D17__LCD_D17 812 >; 813 fsl,drive-strength = <MXS_DRIVE_4mA>; 814 fsl,voltage = <MXS_VOLTAGE_HIGH>; 815 fsl,pull-up = <MXS_PULL_DISABLE>; 816 }; 817 818 lcdif_16bit_pins_a: lcdif-16bit@0 { 819 reg = <0>; 820 fsl,pinmux-ids = < 821 MX28_PAD_LCD_D00__LCD_D0 822 MX28_PAD_LCD_D01__LCD_D1 823 MX28_PAD_LCD_D02__LCD_D2 824 MX28_PAD_LCD_D03__LCD_D3 825 MX28_PAD_LCD_D04__LCD_D4 826 MX28_PAD_LCD_D05__LCD_D5 827 MX28_PAD_LCD_D06__LCD_D6 828 MX28_PAD_LCD_D07__LCD_D7 829 MX28_PAD_LCD_D08__LCD_D8 830 MX28_PAD_LCD_D09__LCD_D9 831 MX28_PAD_LCD_D10__LCD_D10 832 MX28_PAD_LCD_D11__LCD_D11 833 MX28_PAD_LCD_D12__LCD_D12 834 MX28_PAD_LCD_D13__LCD_D13 835 MX28_PAD_LCD_D14__LCD_D14 836 MX28_PAD_LCD_D15__LCD_D15 837 >; 838 fsl,drive-strength = <MXS_DRIVE_4mA>; 839 fsl,voltage = <MXS_VOLTAGE_HIGH>; 840 fsl,pull-up = <MXS_PULL_DISABLE>; 841 }; 842 843 lcdif_sync_pins_a: lcdif-sync@0 { 844 reg = <0>; 845 fsl,pinmux-ids = < 846 MX28_PAD_LCD_RS__LCD_DOTCLK 847 MX28_PAD_LCD_CS__LCD_ENABLE 848 MX28_PAD_LCD_RD_E__LCD_VSYNC 849 MX28_PAD_LCD_WR_RWN__LCD_HSYNC 850 >; 851 fsl,drive-strength = <MXS_DRIVE_4mA>; 852 fsl,voltage = <MXS_VOLTAGE_HIGH>; 853 fsl,pull-up = <MXS_PULL_DISABLE>; 854 }; 855 856 can0_pins_a: can0@0 { 857 reg = <0>; 858 fsl,pinmux-ids = < 859 MX28_PAD_GPMI_RDY2__CAN0_TX 860 MX28_PAD_GPMI_RDY3__CAN0_RX 861 >; 862 fsl,drive-strength = <MXS_DRIVE_4mA>; 863 fsl,voltage = <MXS_VOLTAGE_HIGH>; 864 fsl,pull-up = <MXS_PULL_DISABLE>; 865 }; 866 867 can1_pins_a: can1@0 { 868 reg = <0>; 869 fsl,pinmux-ids = < 870 MX28_PAD_GPMI_CE2N__CAN1_TX 871 MX28_PAD_GPMI_CE3N__CAN1_RX 872 >; 873 fsl,drive-strength = <MXS_DRIVE_4mA>; 874 fsl,voltage = <MXS_VOLTAGE_HIGH>; 875 fsl,pull-up = <MXS_PULL_DISABLE>; 876 }; 877 878 spi2_pins_a: spi2@0 { 879 reg = <0>; 880 fsl,pinmux-ids = < 881 MX28_PAD_SSP2_SCK__SSP2_SCK 882 MX28_PAD_SSP2_MOSI__SSP2_CMD 883 MX28_PAD_SSP2_MISO__SSP2_D0 884 MX28_PAD_SSP2_SS0__SSP2_D3 885 >; 886 fsl,drive-strength = <MXS_DRIVE_8mA>; 887 fsl,voltage = <MXS_VOLTAGE_HIGH>; 888 fsl,pull-up = <MXS_PULL_ENABLE>; 889 }; 890 891 spi3_pins_a: spi3@0 { 892 reg = <0>; 893 fsl,pinmux-ids = < 894 MX28_PAD_AUART2_RX__SSP3_D4 895 MX28_PAD_AUART2_TX__SSP3_D5 896 MX28_PAD_SSP3_SCK__SSP3_SCK 897 MX28_PAD_SSP3_MOSI__SSP3_CMD 898 MX28_PAD_SSP3_MISO__SSP3_D0 899 MX28_PAD_SSP3_SS0__SSP3_D3 900 >; 901 fsl,drive-strength = <MXS_DRIVE_8mA>; 902 fsl,voltage = <MXS_VOLTAGE_HIGH>; 903 fsl,pull-up = <MXS_PULL_DISABLE>; 904 }; 905 906 spi3_pins_b: spi3@1 { 907 reg = <1>; 908 fsl,pinmux-ids = < 909 MX28_PAD_SSP3_SCK__SSP3_SCK 910 MX28_PAD_SSP3_MOSI__SSP3_CMD 911 MX28_PAD_SSP3_MISO__SSP3_D0 912 MX28_PAD_SSP3_SS0__SSP3_D3 913 >; 914 fsl,drive-strength = <MXS_DRIVE_8mA>; 915 fsl,voltage = <MXS_VOLTAGE_HIGH>; 916 fsl,pull-up = <MXS_PULL_ENABLE>; 917 }; 918 919 usb0_pins_a: usb0@0 { 920 reg = <0>; 921 fsl,pinmux-ids = < 922 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 923 >; 924 fsl,drive-strength = <MXS_DRIVE_12mA>; 925 fsl,voltage = <MXS_VOLTAGE_HIGH>; 926 fsl,pull-up = <MXS_PULL_DISABLE>; 927 }; 928 929 usb0_pins_b: usb0@1 { 930 reg = <1>; 931 fsl,pinmux-ids = < 932 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 933 >; 934 fsl,drive-strength = <MXS_DRIVE_12mA>; 935 fsl,voltage = <MXS_VOLTAGE_HIGH>; 936 fsl,pull-up = <MXS_PULL_DISABLE>; 937 }; 938 939 usb1_pins_a: usb1@0 { 940 reg = <0>; 941 fsl,pinmux-ids = < 942 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 943 >; 944 fsl,drive-strength = <MXS_DRIVE_12mA>; 945 fsl,voltage = <MXS_VOLTAGE_HIGH>; 946 fsl,pull-up = <MXS_PULL_DISABLE>; 947 }; 948 949 usb1_pins_b: usb1@1 { 950 reg = <1>; 951 fsl,pinmux-ids = < 952 MX28_PAD_PWM2__USB1_OVERCURRENT 953 >; 954 fsl,drive-strength = <MXS_DRIVE_12mA>; 955 fsl,voltage = <MXS_VOLTAGE_HIGH>; 956 fsl,pull-up = <MXS_PULL_DISABLE>; 957 }; 958 959 usb0_id_pins_a: usb0id@0 { 960 reg = <0>; 961 fsl,pinmux-ids = < 962 MX28_PAD_AUART1_RTS__USB0_ID 963 >; 964 fsl,drive-strength = <MXS_DRIVE_12mA>; 965 fsl,voltage = <MXS_VOLTAGE_HIGH>; 966 fsl,pull-up = <MXS_PULL_ENABLE>; 967 }; 968 969 usb0_id_pins_b: usb0id1@0 { 970 reg = <0>; 971 fsl,pinmux-ids = < 972 MX28_PAD_PWM2__USB0_ID 973 >; 974 fsl,drive-strength = <MXS_DRIVE_12mA>; 975 fsl,voltage = <MXS_VOLTAGE_HIGH>; 976 fsl,pull-up = <MXS_PULL_ENABLE>; 977 }; 978 979 }; 980 981 digctl: digctl@8001c000 { 982 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; 983 reg = <0x8001c000 0x2000>; 984 interrupts = <89>; 985 status = "disabled"; 986 }; 987 988 etm: etm@80022000 { 989 reg = <0x80022000 0x2000>; 990 status = "disabled"; 991 }; 992 993 dma_apbx: dma-controller@80024000 { 994 compatible = "fsl,imx28-dma-apbx"; 995 reg = <0x80024000 0x2000>; 996 interrupts = <78>, <79>, <66>, <0>, 997 <80>, <81>, <68>, <69>, 998 <70>, <71>, <72>, <73>, 999 <74>, <75>, <76>, <77>; 1000 #dma-cells = <1>; 1001 dma-channels = <16>; 1002 clocks = <&clks 26>; 1003 }; 1004 1005 dcp: crypto@80028000 { 1006 compatible = "fsl,imx28-dcp"; 1007 reg = <0x80028000 0x2000>; 1008 interrupts = <52>, <53>, <54>; 1009 status = "okay"; 1010 }; 1011 1012 pxp: pxp@8002a000 { 1013 reg = <0x8002a000 0x2000>; 1014 interrupts = <39>; 1015 status = "disabled"; 1016 }; 1017 1018 ocotp: efuse@8002c000 { 1019 compatible = "fsl,imx28-ocotp", "fsl,ocotp"; 1020 #address-cells = <1>; 1021 #size-cells = <1>; 1022 reg = <0x8002c000 0x2000>; 1023 clocks = <&clks 25>; 1024 }; 1025 1026 axi-ahb@8002e000 { 1027 reg = <0x8002e000 0x2000>; 1028 status = "disabled"; 1029 }; 1030 1031 lcdif: lcdif@80030000 { 1032 compatible = "fsl,imx28-lcdif"; 1033 reg = <0x80030000 0x2000>; 1034 interrupts = <38>; 1035 clocks = <&clks 55>; 1036 dmas = <&dma_apbh 13>; 1037 dma-names = "rx"; 1038 status = "disabled"; 1039 }; 1040 1041 can0: can@80032000 { 1042 compatible = "fsl,imx28-flexcan"; 1043 reg = <0x80032000 0x2000>; 1044 interrupts = <8>; 1045 clocks = <&clks 58>, <&clks 58>; 1046 clock-names = "ipg", "per"; 1047 status = "disabled"; 1048 }; 1049 1050 can1: can@80034000 { 1051 compatible = "fsl,imx28-flexcan"; 1052 reg = <0x80034000 0x2000>; 1053 interrupts = <9>; 1054 clocks = <&clks 59>, <&clks 59>; 1055 clock-names = "ipg", "per"; 1056 status = "disabled"; 1057 }; 1058 1059 simdbg: simdbg@8003c000 { 1060 reg = <0x8003c000 0x200>; 1061 status = "disabled"; 1062 }; 1063 1064 simgpmisel: simgpmisel@8003c200 { 1065 reg = <0x8003c200 0x100>; 1066 status = "disabled"; 1067 }; 1068 1069 simsspsel: simsspsel@8003c300 { 1070 reg = <0x8003c300 0x100>; 1071 status = "disabled"; 1072 }; 1073 1074 simmemsel: simmemsel@8003c400 { 1075 reg = <0x8003c400 0x100>; 1076 status = "disabled"; 1077 }; 1078 1079 gpiomon: gpiomon@8003c500 { 1080 reg = <0x8003c500 0x100>; 1081 status = "disabled"; 1082 }; 1083 1084 simenet: simenet@8003c700 { 1085 reg = <0x8003c700 0x100>; 1086 status = "disabled"; 1087 }; 1088 1089 armjtag: armjtag@8003c800 { 1090 reg = <0x8003c800 0x100>; 1091 status = "disabled"; 1092 }; 1093 }; 1094 1095 apbx-bus@80040000 { 1096 compatible = "simple-bus"; 1097 #address-cells = <1>; 1098 #size-cells = <1>; 1099 reg = <0x80040000 0x40000>; 1100 ranges; 1101 1102 clks: clkctrl@80040000 { 1103 compatible = "fsl,imx28-clkctrl"; 1104 reg = <0x80040000 0x2000>; 1105 #clock-cells = <1>; 1106 }; 1107 1108 saif0: saif@80042000 { 1109 #sound-dai-cells = <0>; 1110 compatible = "fsl,imx28-saif"; 1111 reg = <0x80042000 0x2000>; 1112 interrupts = <59>; 1113 #clock-cells = <0>; 1114 clocks = <&clks 53>; 1115 dmas = <&dma_apbx 4>; 1116 dma-names = "rx-tx"; 1117 status = "disabled"; 1118 }; 1119 1120 power: power@80044000 { 1121 reg = <0x80044000 0x2000>; 1122 status = "disabled"; 1123 }; 1124 1125 saif1: saif@80046000 { 1126 #sound-dai-cells = <0>; 1127 compatible = "fsl,imx28-saif"; 1128 reg = <0x80046000 0x2000>; 1129 interrupts = <58>; 1130 clocks = <&clks 54>; 1131 dmas = <&dma_apbx 5>; 1132 dma-names = "rx-tx"; 1133 status = "disabled"; 1134 }; 1135 1136 lradc: lradc@80050000 { 1137 compatible = "fsl,imx28-lradc"; 1138 reg = <0x80050000 0x2000>; 1139 interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>, 1140 <20>, <21>, <22>, <23>, <24>, <25>; 1141 status = "disabled"; 1142 clocks = <&clks 41>; 1143 #io-channel-cells = <1>; 1144 }; 1145 1146 spdif: spdif@80054000 { 1147 reg = <0x80054000 0x2000>; 1148 interrupts = <45>; 1149 dmas = <&dma_apbx 2>; 1150 dma-names = "tx"; 1151 status = "disabled"; 1152 }; 1153 1154 mxs_rtc: rtc@80056000 { 1155 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; 1156 reg = <0x80056000 0x2000>; 1157 interrupts = <29>; 1158 }; 1159 1160 i2c0: i2c@80058000 { 1161 #address-cells = <1>; 1162 #size-cells = <0>; 1163 compatible = "fsl,imx28-i2c"; 1164 reg = <0x80058000 0x2000>; 1165 interrupts = <111>; 1166 clock-frequency = <100000>; 1167 dmas = <&dma_apbx 6>; 1168 dma-names = "rx-tx"; 1169 status = "disabled"; 1170 }; 1171 1172 i2c1: i2c@8005a000 { 1173 #address-cells = <1>; 1174 #size-cells = <0>; 1175 compatible = "fsl,imx28-i2c"; 1176 reg = <0x8005a000 0x2000>; 1177 interrupts = <110>; 1178 clock-frequency = <100000>; 1179 dmas = <&dma_apbx 7>; 1180 dma-names = "rx-tx"; 1181 status = "disabled"; 1182 }; 1183 1184 pwm: pwm@80064000 { 1185 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; 1186 reg = <0x80064000 0x2000>; 1187 clocks = <&clks 44>; 1188 #pwm-cells = <3>; 1189 fsl,pwm-number = <8>; 1190 status = "disabled"; 1191 }; 1192 1193 timer: timrot@80068000 { 1194 compatible = "fsl,imx28-timrot", "fsl,timrot"; 1195 reg = <0x80068000 0x2000>; 1196 interrupts = <48>, <49>, <50>, <51>; 1197 clocks = <&clks 26>; 1198 }; 1199 1200 auart0: serial@8006a000 { 1201 compatible = "fsl,imx28-auart", "fsl,imx23-auart"; 1202 reg = <0x8006a000 0x2000>; 1203 interrupts = <112>; 1204 dmas = <&dma_apbx 8>, <&dma_apbx 9>; 1205 dma-names = "rx", "tx"; 1206 clocks = <&clks 45>; 1207 status = "disabled"; 1208 }; 1209 1210 auart1: serial@8006c000 { 1211 compatible = "fsl,imx28-auart", "fsl,imx23-auart"; 1212 reg = <0x8006c000 0x2000>; 1213 interrupts = <113>; 1214 dmas = <&dma_apbx 10>, <&dma_apbx 11>; 1215 dma-names = "rx", "tx"; 1216 clocks = <&clks 45>; 1217 status = "disabled"; 1218 }; 1219 1220 auart2: serial@8006e000 { 1221 compatible = "fsl,imx28-auart", "fsl,imx23-auart"; 1222 reg = <0x8006e000 0x2000>; 1223 interrupts = <114>; 1224 dmas = <&dma_apbx 12>, <&dma_apbx 13>; 1225 dma-names = "rx", "tx"; 1226 clocks = <&clks 45>; 1227 status = "disabled"; 1228 }; 1229 1230 auart3: serial@80070000 { 1231 compatible = "fsl,imx28-auart", "fsl,imx23-auart"; 1232 reg = <0x80070000 0x2000>; 1233 interrupts = <115>; 1234 dmas = <&dma_apbx 14>, <&dma_apbx 15>; 1235 dma-names = "rx", "tx"; 1236 clocks = <&clks 45>; 1237 status = "disabled"; 1238 }; 1239 1240 auart4: serial@80072000 { 1241 compatible = "fsl,imx28-auart", "fsl,imx23-auart"; 1242 reg = <0x80072000 0x2000>; 1243 interrupts = <116>; 1244 dmas = <&dma_apbx 0>, <&dma_apbx 1>; 1245 dma-names = "rx", "tx"; 1246 clocks = <&clks 45>; 1247 status = "disabled"; 1248 }; 1249 1250 duart: serial@80074000 { 1251 compatible = "arm,pl011", "arm,primecell"; 1252 reg = <0x80074000 0x1000>; 1253 interrupts = <47>; 1254 clocks = <&clks 45>, <&clks 26>; 1255 clock-names = "uartclk", "apb_pclk"; 1256 status = "disabled"; 1257 }; 1258 1259 usbphy0: usbphy@8007c000 { 1260 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; 1261 reg = <0x8007c000 0x2000>; 1262 clocks = <&clks 62>; 1263 status = "disabled"; 1264 }; 1265 1266 usbphy1: usbphy@8007e000 { 1267 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; 1268 reg = <0x8007e000 0x2000>; 1269 clocks = <&clks 63>; 1270 status = "disabled"; 1271 }; 1272 }; 1273 }; 1274 1275 ahb@80080000 { 1276 compatible = "simple-bus"; 1277 #address-cells = <1>; 1278 #size-cells = <1>; 1279 reg = <0x80080000 0x80000>; 1280 ranges; 1281 1282 usb0: usb@80080000 { 1283 compatible = "fsl,imx28-usb", "fsl,imx27-usb"; 1284 reg = <0x80080000 0x10000>; 1285 interrupts = <93>; 1286 clocks = <&clks 60>; 1287 fsl,usbphy = <&usbphy0>; 1288 status = "disabled"; 1289 }; 1290 1291 usb1: usb@80090000 { 1292 compatible = "fsl,imx28-usb", "fsl,imx27-usb"; 1293 reg = <0x80090000 0x10000>; 1294 interrupts = <92>; 1295 clocks = <&clks 61>; 1296 fsl,usbphy = <&usbphy1>; 1297 dr_mode = "host"; 1298 status = "disabled"; 1299 }; 1300 1301 dflpt: dflpt@800c0000 { 1302 reg = <0x800c0000 0x10000>; 1303 status = "disabled"; 1304 }; 1305 1306 mac0: ethernet@800f0000 { 1307 compatible = "fsl,imx28-fec"; 1308 reg = <0x800f0000 0x4000>; 1309 interrupts = <101>; 1310 clocks = <&clks 57>, <&clks 57>, <&clks 64>; 1311 clock-names = "ipg", "ahb", "enet_out"; 1312 status = "disabled"; 1313 }; 1314 1315 mac1: ethernet@800f4000 { 1316 compatible = "fsl,imx28-fec"; 1317 reg = <0x800f4000 0x4000>; 1318 interrupts = <102>; 1319 clocks = <&clks 57>, <&clks 57>; 1320 clock-names = "ipg", "ahb"; 1321 status = "disabled"; 1322 }; 1323 1324 eth_switch: switch@800f8000 { 1325 reg = <0x800f8000 0x8000>; 1326 status = "disabled"; 1327 }; 1328 }; 1329 1330 iio-hwmon { 1331 compatible = "iio-hwmon"; 1332 io-channels = <&lradc 8>; 1333 }; 1334}; 1335