1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Crystalfontz America, Inc. 4 * Copyright 2013 Free Electrons 5 */ 6 7/* 8 * The CFA-10058 is an expansion board for the CFA-10036 module, thus we 9 * need to include the CFA-10036 DTS. 10 */ 11#include "imx28-cfa10036.dts" 12 13/ { 14 model = "Crystalfontz CFA-10058 Board"; 15 compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; 16 17 reg_usb1_vbus: regulator-0 { 18 compatible = "regulator-fixed"; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&usb_pins_cfa10058>; 21 regulator-name = "usb1_vbus"; 22 regulator-min-microvolt = <5000000>; 23 regulator-max-microvolt = <5000000>; 24 gpio = <&gpio0 7 1>; 25 }; 26 27 backlight { 28 compatible = "pwm-backlight"; 29 pwms = <&pwm 3 5000000 0>; 30 brightness-levels = <0 4 8 16 32 64 128 255>; 31 default-brightness-level = <6>; 32 }; 33}; 34 35&lcdif { 36 pinctrl-names = "default"; 37 pinctrl-0 = <&lcdif_24bit_pins_a 38 &lcdif_pins_cfa10058>; 39 display = <&display0>; 40 status = "okay"; 41 42 display0: display0 { 43 bits-per-pixel = <32>; 44 bus-width = <24>; 45 46 display-timings { 47 native-mode = <&timing0>; 48 timing0: timing0 { 49 clock-frequency = <30000000>; 50 hactive = <800>; 51 vactive = <480>; 52 hback-porch = <40>; 53 hfront-porch = <40>; 54 vback-porch = <13>; 55 vfront-porch = <29>; 56 hsync-len = <8>; 57 vsync-len = <8>; 58 hsync-active = <0>; 59 vsync-active = <0>; 60 de-active = <1>; 61 pixelclk-active = <1>; 62 }; 63 }; 64 }; 65}; 66 67&lradc { 68 fsl,lradc-touchscreen-wires = <4>; 69 status = "okay"; 70}; 71 72&mac0 { 73 phy-mode = "rmii"; 74 pinctrl-names = "default"; 75 pinctrl-0 = <&mac0_pins_a>; 76 phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; 77 phy-reset-duration = <100>; 78 status = "okay"; 79}; 80 81&pinctrl { 82 usb_pins_cfa10058: usb-10058@0 { 83 reg = <0>; 84 fsl,pinmux-ids = < 85 MX28_PAD_GPMI_D07__GPIO_0_7 86 >; 87 fsl,drive-strength = <MXS_DRIVE_4mA>; 88 fsl,voltage = <MXS_VOLTAGE_HIGH>; 89 fsl,pull-up = <MXS_PULL_DISABLE>; 90 }; 91 92 lcdif_pins_cfa10058: lcdif-10058@0 { 93 reg = <0>; 94 fsl,pinmux-ids = < 95 MX28_PAD_LCD_RD_E__LCD_VSYNC 96 MX28_PAD_LCD_WR_RWN__LCD_HSYNC 97 MX28_PAD_LCD_RS__LCD_DOTCLK 98 MX28_PAD_LCD_CS__LCD_ENABLE 99 >; 100 fsl,drive-strength = <MXS_DRIVE_4mA>; 101 fsl,voltage = <MXS_VOLTAGE_HIGH>; 102 fsl,pull-up = <MXS_PULL_DISABLE>; 103 }; 104}; 105 106&pwm { 107 pinctrl-names = "default"; 108 pinctrl-0 = <&pwm3_pins_b>; 109 status = "okay"; 110}; 111 112&usb1 { 113 vbus-supply = <®_usb1_vbus>; 114 pinctrl-0 = <&usb1_pins_a>; 115 pinctrl-names = "default"; 116 status = "okay"; 117}; 118 119&usbphy1 { 120 status = "okay"; 121}; 122