xref: /linux/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts (revision 6e7fd890f1d6ac83805409e9c346240de2705584)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2016 NXP Semiconductors.
4 * Author: Fabio Estevam <fabio.estevam@nxp.com>
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/input/input.h>
10#include "imx7s.dtsi"
11
12/ {
13	model = "Element14 Warp i.MX7 Board";
14	compatible = "element14,imx7s-warp", "fsl,imx7s";
15
16	memory@80000000 {
17		device_type = "memory";
18		reg = <0x80000000 0x20000000>;
19	};
20
21	gpio-keys {
22		compatible = "gpio-keys";
23		pinctrl-0 = <&pinctrl_gpio>;
24		autorepeat;
25
26		back {
27			label = "Back";
28			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
29			linux,code = <KEY_BACK>;
30			wakeup-source;
31		};
32	};
33
34	reg_brcm: regulator-brcm {
35		compatible = "regulator-fixed";
36		enable-active-high;
37		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
38		pinctrl-names = "default";
39		pinctrl-0 = <&pinctrl_brcm_reg>;
40		regulator-name = "brcm_reg";
41		regulator-min-microvolt = <3300000>;
42		regulator-max-microvolt = <3300000>;
43		startup-delay-us = <200000>;
44	};
45
46	reg_bt: regulator-bt {
47		compatible = "regulator-fixed";
48		pinctrl-names = "default";
49		pinctrl-0 = <&pinctrl_bt_reg>;
50		enable-active-high;
51		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
52		regulator-name = "bt_reg";
53		regulator-min-microvolt = <3300000>;
54		regulator-max-microvolt = <3300000>;
55		regulator-always-on;
56	};
57
58	reg_peri_3p15v: regulator-peri-3p15v {
59		compatible = "regulator-fixed";
60		regulator-name = "peri_3p15v_reg";
61		regulator-min-microvolt = <3150000>;
62		regulator-max-microvolt = <3150000>;
63		regulator-always-on;
64	};
65
66	sound {
67		compatible = "simple-audio-card";
68		simple-audio-card,name = "imx7-sgtl5000";
69		simple-audio-card,format = "i2s";
70		simple-audio-card,bitclock-master = <&dailink_master>;
71		simple-audio-card,frame-master = <&dailink_master>;
72		simple-audio-card,cpu {
73			sound-dai = <&sai1>;
74		};
75
76		dailink_master: simple-audio-card,codec {
77			sound-dai = <&codec>;
78			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
79		};
80	};
81};
82
83&clks {
84	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
85	assigned-clock-rates = <884736000>;
86};
87
88&csi {
89	status = "okay";
90};
91
92&i2c1 {
93	pinctrl-names = "default";
94	pinctrl-0 = <&pinctrl_i2c1>;
95	status = "okay";
96
97	pmic: pmic@8 {
98		compatible = "fsl,pfuze3000";
99		reg = <0x08>;
100
101		regulators {
102			sw1a_reg: sw1a {
103				regulator-min-microvolt = <700000>;
104				regulator-max-microvolt = <1475000>;
105				regulator-boot-on;
106				regulator-always-on;
107				regulator-ramp-delay = <6250>;
108			};
109
110			/* use sw1c_reg to align with pfuze100/pfuze200 */
111			sw1c_reg: sw1b {
112				regulator-min-microvolt = <700000>;
113				regulator-max-microvolt = <1475000>;
114				regulator-boot-on;
115				regulator-always-on;
116				regulator-ramp-delay = <6250>;
117			};
118
119			sw2_reg: sw2 {
120				regulator-min-microvolt = <1500000>;
121				regulator-max-microvolt = <1850000>;
122				regulator-boot-on;
123				regulator-always-on;
124			};
125
126			sw3a_reg: sw3 {
127				regulator-min-microvolt = <900000>;
128				regulator-max-microvolt = <1650000>;
129				regulator-boot-on;
130				regulator-always-on;
131			};
132
133			swbst_reg: swbst {
134				regulator-min-microvolt = <5000000>;
135				regulator-max-microvolt = <5150000>;
136				regulator-boot-on;
137				regulator-always-on;
138			};
139
140			snvs_reg: vsnvs {
141				regulator-min-microvolt = <1000000>;
142				regulator-max-microvolt = <3000000>;
143				regulator-boot-on;
144				regulator-always-on;
145			};
146
147			vref_reg: vrefddr {
148				regulator-boot-on;
149				regulator-always-on;
150			};
151
152			vgen1_reg: vldo1 {
153				regulator-min-microvolt = <1800000>;
154				regulator-max-microvolt = <3300000>;
155				regulator-always-on;
156			};
157
158			vgen2_reg: vldo2 {
159				regulator-min-microvolt = <800000>;
160				regulator-max-microvolt = <1550000>;
161			};
162
163			vgen3_reg: vccsd {
164				regulator-min-microvolt = <2850000>;
165				regulator-max-microvolt = <3300000>;
166				regulator-always-on;
167			};
168
169			vgen4_reg: v33 {
170				regulator-min-microvolt = <2850000>;
171				regulator-max-microvolt = <3300000>;
172				regulator-always-on;
173			};
174
175			vgen5_reg: vldo3 {
176				regulator-min-microvolt = <1800000>;
177				regulator-max-microvolt = <3300000>;
178				regulator-always-on;
179			};
180
181			vgen6_reg: vldo4 {
182				regulator-min-microvolt = <1800000>;
183				regulator-max-microvolt = <3300000>;
184				regulator-always-on;
185			};
186		};
187	};
188};
189
190&i2c2 {
191	clock-frequency = <100000>;
192	pinctrl-names = "default";
193	pinctrl-0 = <&pinctrl_i2c2>;
194	status = "okay";
195
196	ov2680: camera@36 {
197		compatible = "ovti,ov2680";
198		pinctrl-names = "default";
199		pinctrl-0 = <&pinctrl_ov2680>;
200		reg = <0x36>;
201		clocks = <&osc>;
202		clock-names = "xvclk";
203		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
204		DOVDD-supply = <&sw2_reg>;
205		DVDD-supply = <&sw2_reg>;
206		AVDD-supply = <&reg_peri_3p15v>;
207
208		port {
209			ov2680_to_mipi: endpoint {
210				remote-endpoint = <&mipi_from_sensor>;
211				clock-lanes = <0>;
212				data-lanes = <1>;
213				link-frequencies = /bits/ 64 <330000000>;
214			};
215		};
216	};
217};
218
219&i2c3 {
220	clock-frequency = <100000>;
221	pinctrl-names = "default";
222	pinctrl-0 = <&pinctrl_i2c3>;
223	status = "okay";
224};
225
226&i2c4 {
227	clock-frequency = <100000>;
228	pinctrl-names = "default";
229	pinctrl-0 = <&pinctrl_i2c4>;
230	status = "okay";
231
232	codec: sgtl5000@a {
233		#sound-dai-cells = <0>;
234		reg = <0x0a>;
235		compatible = "fsl,sgtl5000";
236		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
237		pinctrl-names = "default";
238		pinctrl-0 = <&pinctrl_sai1_mclk>;
239		VDDA-supply = <&vgen4_reg>;
240		VDDIO-supply = <&vgen4_reg>;
241		VDDD-supply = <&vgen2_reg>;
242	};
243
244	mpl3115@60 {
245		compatible = "fsl,mpl3115";
246		reg = <0x60>;
247	};
248};
249
250&mipi_csi {
251	clock-frequency = <166000000>;
252	status = "okay";
253
254	ports {
255		port@0 {
256			reg = <0>;
257
258			mipi_from_sensor: endpoint {
259				remote-endpoint = <&ov2680_to_mipi>;
260				data-lanes = <1>;
261			};
262		};
263	};
264};
265
266&sai1 {
267	pinctrl-names = "default";
268	pinctrl-0 = <&pinctrl_sai1>;
269	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
270			  <&clks IMX7D_SAI1_ROOT_CLK>;
271	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
272	assigned-clock-rates = <0>, <36864000>;
273	status = "okay";
274};
275
276&uart1 {
277	pinctrl-names = "default";
278	pinctrl-0 = <&pinctrl_uart1>;
279	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
280	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
281	status = "okay";
282};
283
284&uart3  {
285	pinctrl-names = "default";
286	pinctrl-0 = <&pinctrl_uart3>;
287	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
288	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
289	uart-has-rtscts;
290	status = "okay";
291};
292
293&uart6 {
294	pinctrl-names = "default";
295	pinctrl-0 = <&pinctrl_uart6>;
296	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
297	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
298	fsl,dte-mode;
299	status = "okay";
300};
301
302&usbotg1 {
303	dr_mode = "peripheral";
304	status = "okay";
305};
306
307&usdhc1 {
308	pinctrl-names = "default";
309	pinctrl-0 = <&pinctrl_usdhc1>;
310	bus-width = <4>;
311	keep-power-in-suspend;
312	no-1-8-v;
313	non-removable;
314	vmmc-supply = <&reg_brcm>;
315	status = "okay";
316};
317
318&usdhc3 {
319	pinctrl-names = "default", "state_100mhz", "state_200mhz";
320	pinctrl-0 = <&pinctrl_usdhc3>;
321	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
322	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
323	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
324	assigned-clock-rates = <400000000>;
325	bus-width = <8>;
326	no-1-8-v;
327	fsl,tuning-step = <2>;
328	non-removable;
329	status = "okay";
330};
331
332&video_mux {
333	status = "okay";
334};
335
336&wdog1 {
337	pinctrl-names = "default";
338	pinctrl-0 = <&pinctrl_wdog>;
339	fsl,ext-reset-output;
340	status = "okay";
341};
342
343&iomuxc {
344	pinctrl_brcm_reg: brcmreggrp {
345		fsl,pins = <
346			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
347		>;
348	};
349
350	pinctrl_bt_reg: btreggrp {
351		fsl,pins = <
352			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
353		>;
354	};
355
356	pinctrl_gpio: gpiogrp {
357		fsl,pins = <
358			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
359		>;
360	};
361
362	pinctrl_i2c1: i2c1grp {
363		fsl,pins = <
364			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
365			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
366		>;
367	};
368
369	pinctrl_i2c2: i2c2grp {
370		fsl,pins = <
371			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
372			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
373		>;
374	};
375
376	pinctrl_i2c3: i2c3grp {
377		fsl,pins = <
378			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
379			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
380		>;
381	};
382
383	pinctrl_i2c4: i2c4grp {
384		fsl,pins = <
385			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
386			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
387		>;
388	};
389
390	pinctrl_ov2680: ov2660grp {
391		fsl,pins = <
392			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
393		>;
394	};
395
396	pinctrl_sai1: sai1grp {
397		fsl,pins = <
398			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
399			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
400			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
401			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
402		>;
403	};
404
405	pinctrl_sai1_mclk: sai1mclkgrp {
406		fsl,pins = <
407			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
408		>;
409	};
410
411	pinctrl_uart1: uart1grp {
412		fsl,pins = <
413			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
414			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
415		>;
416	};
417
418	pinctrl_uart3: uart3grp {
419		fsl,pins = <
420			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
421			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
422			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
423			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
424		>;
425	};
426
427	pinctrl_uart6: uart6grp {
428		fsl,pins = <
429			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
430			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
431		>;
432	};
433
434	pinctrl_usdhc1: usdhc1grp {
435		fsl,pins = <
436			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
437			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
438			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
439			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
440			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
441			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
442			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
443		>;
444	};
445
446	pinctrl_usdhc3: usdhc3grp {
447		fsl,pins = <
448			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
449			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
450			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
451			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
452			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
453			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
454			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
455			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
456			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
457			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
458			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
459		>;
460	};
461
462	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
463		fsl,pins = <
464			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
465			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
466			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
467			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
468			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
469			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
470			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
471			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
472			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
473			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
474			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
475		>;
476	};
477
478	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
479		fsl,pins = <
480			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
481			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
482			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
483			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
484			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
485			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
486			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
487			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
488			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
489			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
490			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
491		>;
492	};
493};
494
495&iomuxc_lpsr {
496	pinctrl_wdog: wdoggrp {
497		fsl,pins = <
498			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
499		>;
500	};
501};
502