xref: /linux/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2016 PHYTEC Messtechnik GmbH
4 * Author: Christian Hemp <c.hemp@phytec.de>
5 */
6
7/ {
8	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
9	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
10
11	aliases {
12		rtc0 = &i2c_rtc;
13		rtc1 = &snvs_rtc;
14	};
15
16	reg_sound_1v8: regulator-1v8 {
17		compatible = "regulator-fixed";
18		regulator-name = "i2s-audio-1v8";
19		regulator-min-microvolt = <1800000>;
20		regulator-max-microvolt = <1800000>;
21		status = "disabled";
22	};
23
24	reg_sound_3v3: regulator-3v3 {
25		compatible = "regulator-fixed";
26		regulator-name = "i2s-audio-3v3";
27		regulator-min-microvolt = <3300000>;
28		regulator-max-microvolt = <3300000>;
29		status = "disabled";
30	};
31
32	reg_can1_en: regulator-can1 {
33		compatible = "regulator-fixed";
34		pinctrl-names = "default";
35		pinctrl-0 = <&princtrl_flexcan1_en>;
36		regulator-name = "Can";
37		regulator-min-microvolt = <3300000>;
38		regulator-max-microvolt = <3300000>;
39		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
40		enable-active-high;
41		status = "disabled";
42	};
43
44	reg_adc1_vref_3v3: regulator-vref-3v3 {
45		compatible = "regulator-fixed";
46		regulator-name = "vref-3v3";
47		regulator-min-microvolt = <3300000>;
48		regulator-max-microvolt = <3300000>;
49	};
50
51	sound: sound {
52		compatible = "simple-audio-card";
53		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
54		simple-audio-card,format = "i2s";
55		simple-audio-card,bitclock-master = <&dailink_master>;
56		simple-audio-card,frame-master = <&dailink_master>;
57		simple-audio-card,widgets =
58			"Line", "Line In",
59			"Line", "Line Out",
60			"Speaker", "Speaker";
61		simple-audio-card,routing =
62			"Line Out", "LLOUT",
63			"Line Out", "RLOUT",
64			"Speaker", "SPOP",
65			"Speaker", "SPOM",
66			"LINE1L", "Line In",
67			"LINE1R", "Line In";
68		status = "disabled";
69
70		simple-audio-card,cpu {
71			sound-dai = <&sai2>;
72		};
73
74		dailink_master: simple-audio-card,codec {
75			sound-dai = <&tlv320>;
76			clocks = <&clks IMX6UL_CLK_SAI2>;
77		};
78	};
79
80};
81
82&adc1 {
83	pinctrl-names = "default";
84	pinctrl-0 = <&pinctrl_adc1>;
85	vref-supply = <&reg_adc1_vref_3v3>;
86	status = "disabled";
87};
88
89&can1 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_flexcan1>;
92	xceiver-supply = <&reg_can1_en>;
93	status = "disabled";
94};
95
96&clks {
97	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
98	assigned-clock-rates = <786432000>;
99};
100
101&ecspi3 {
102	pinctrl-names = "default";
103	pinctrl-0 = <&pinctrl_ecspi3>;
104	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
105	status = "disabled";
106};
107
108&fec2 {
109	pinctrl-names = "default";
110	pinctrl-0 = <&pinctrl_enet2>;
111	phy-mode = "rmii";
112	phy-handle = <&ethphy2>;
113	status = "disabled";
114};
115
116&i2c1 {
117	tlv320: codec@18 {
118		compatible = "ti,tlv320aic3007";
119		#sound-dai-cells = <0>;
120		reg = <0x18>;
121		AVDD-supply = <&reg_sound_3v3>;
122		IOVDD-supply = <&reg_sound_3v3>;
123		DRVDD-supply = <&reg_sound_3v3>;
124		DVDD-supply = <&reg_sound_1v8>;
125		status = "disabled";
126	};
127
128	i2c_rtc: rtc@68 {
129		pinctrl-names = "default";
130		pinctrl-0 = <&pinctrl_rtc_int>;
131		compatible = "microcrystal,rv4162";
132		reg = <0x68>;
133		interrupt-parent = <&gpio5>;
134		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
135		status = "disabled";
136	};
137};
138
139&mdio {
140	ethphy2: ethernet-phy@2 {
141		reg = <2>;
142		micrel,led-mode = <1>;
143		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
144		clock-names = "rmii-ref";
145		status = "disabled";
146	};
147};
148
149&sai2 {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pinctrl_sai2>;
152	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
153			<&clks IMX6UL_CLK_SAI2>;
154	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
155	assigned-clock-rates = <0>, <19200000>;
156	fsl,sai-mclk-direction-output;
157	status = "disabled";
158};
159
160&uart5 {
161	pinctrl-names = "default";
162	pinctrl-0 = <&pinctrl_uart5>;
163	uart-has-rtscts;
164	status = "disabled";
165};
166
167&usbotg1 {
168	pinctrl-names = "default";
169	pinctrl-0 = <&pinctrl_usb_otg1_id>;
170	dr_mode = "otg";
171	status = "disabled";
172};
173
174&usbotg2 {
175	dr_mode = "host";
176	disable-over-current;
177	status = "disabled";
178};
179
180&usdhc1 {
181	pinctrl-names = "default", "state_100mhz", "state_200mhz";
182	pinctrl-0 = <&pinctrl_usdhc1>;
183	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
184	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
185	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
186	no-1-8-v;
187	keep-power-in-suspend;
188	wakeup-source;
189	disable-wp;
190	status = "disabled";
191};
192
193&iomuxc {
194	pinctrl_adc1: adc1grp {
195		fsl,pins = <
196			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
197		>;
198	};
199
200	pinctrl_ecspi3: ecspi3grp {
201		fsl,pins = <
202			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
203			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
204			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
205			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
206		>;
207	};
208
209	pinctrl_enet2: enet2grp {
210		fsl,pins = <
211			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
212			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
213			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
214			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
215			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
216			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
217			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
218			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
219		>;
220	};
221
222	pinctrl_flexcan1: flexcan1grp {
223		fsl,pins = <
224			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
225			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
226		>;
227	};
228
229	princtrl_flexcan1_en: flexcan1engrp {
230		fsl,pins = <
231			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
232		>;
233	};
234
235	pinctrl_rtc_int: rtcintgrp {
236		fsl,pins = <
237			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
238		>;
239	};
240
241	pinctrl_sai2: sai2grp {
242		fsl,pins = <
243			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
244			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
245			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
246			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
247			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
248		>;
249	};
250
251	pinctrl_uart5: uart5grp {
252		fsl,pins = <
253			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
254			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
255			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
256			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
257		>;
258	};
259
260	pinctrl_usb_otg1_id: usbotg1idgrp {
261		fsl,pins = <
262			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
263		>;
264	};
265
266	pinctrl_usdhc1: usdhc1grp {
267		fsl,pins = <
268			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
269			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
270			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
271			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
272			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
273			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
274			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
275		>;
276	};
277
278	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
279		fsl,pins = <
280			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
281			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
282			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
283			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
284			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
285			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
286		>;
287	};
288
289	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
290		fsl,pins = <
291			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
292			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
293			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
294			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
295			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
296			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
297		>;
298	};
299};
300