1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2021 PHYTEC Messtechnik GmbH 4 * Author: Yunus Bas <y.bas@phytec.de> 5 */ 6 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 reg_wl_en: regulator-wl-en { 12 compatible = "regulator-fixed"; 13 regulator-name = "wlan_en"; 14 regulator-min-microvolt = <3300000>; 15 regulator-max-microvolt = <3300000>; 16 pinctrl-names = "default"; 17 pinctrl-0 = <&pinctrl_wl>; 18 gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; 19 enable-active-high; 20 startup-delay-us = <100>; 21 status = "disabled"; 22 }; 23}; 24 25&iomuxc { 26 pinctrl_bt: btgrp { 27 fsl,pins = < 28 MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3031 /* BT ENABLE */ 29 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3031 /* HOST WAKEUP */ 30 MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x3031 /* DEV WAKEUP */ 31 >; 32 }; 33 34 pinctrl_uart2_bt: uart2-bt-grp { 35 fsl,pins = < 36 MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059 37 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059 38 MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x17059 39 MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x17059 40 >; 41 }; 42 43 pinctrl_usdhc2_wl: usdhc2-wl-grp { 44 fsl,pins = < 45 MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051 46 MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061 47 MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x10051 48 MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x10051 49 MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x10051 50 MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x10051 51 >; 52 }; 53 54 pinctrl_wl: wlgrp { 55 fsl,pins = < 56 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 /* WLAN ENABLE */ 57 >; 58 }; 59}; 60 61&uart2 { 62 pinctrl-names = "default"; 63 pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>; 64 uart-has-rtscts; 65 status = "disabled"; 66 67 bluetooth { 68 compatible = "brcm,bcm43438-bt"; 69 shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; 70 device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; 71 host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; 72 }; 73}; 74 75&usdhc2 { 76 #address-cells = <1>; 77 #size-cells = <0>; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_usdhc2_wl>; 80 vmmc-supply = <®_wl_en>; 81 bus-width = <4>; 82 non-removable; 83 no-1-8-v; 84 status = "disabled"; 85 86 brmcf: wifi@1 { 87 compatible = "brcm,bcm4329-fmac"; 88 reg = <1>; 89 }; 90}; 91