1// SPDX-License-Identifier: GPL-2.0 2// 3// Copyright (C) 2015 Freescale Semiconductor, Inc. 4 5#include <dt-bindings/media/video-interfaces.h> 6 7/ { 8 chosen { 9 stdout-path = &uart1; 10 }; 11 12 memory@80000000 { 13 device_type = "memory"; 14 reg = <0x80000000 0x20000000>; 15 }; 16 17 backlight_display: backlight-display { 18 compatible = "pwm-backlight"; 19 pwms = <&pwm1 0 5000000>; 20 brightness-levels = <0 4 8 16 32 64 128 255>; 21 default-brightness-level = <6>; 22 status = "okay"; 23 }; 24 25 26 reg_sd1_vmmc: regulator-sd1-vmmc { 27 compatible = "regulator-fixed"; 28 regulator-name = "VSD_3V3"; 29 regulator-min-microvolt = <3300000>; 30 regulator-max-microvolt = <3300000>; 31 gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; 32 enable-active-high; 33 }; 34 35 reg_peri_3v3: regulator-peri-3v3 { 36 compatible = "regulator-fixed"; 37 pinctrl-names = "default"; 38 pinctrl-0 = <&pinctrl_peri_3v3>; 39 regulator-name = "VPERI_3V3"; 40 regulator-min-microvolt = <3300000>; 41 regulator-max-microvolt = <3300000>; 42 gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; 43 /* 44 * If you want to want to make this dynamic please 45 * check schematics and test all affected peripherals: 46 * 47 * - sensors 48 * - ethernet phy 49 * - can 50 * - bluetooth 51 * - wm8960 audio codec 52 * - ov5640 camera 53 */ 54 regulator-always-on; 55 }; 56 57 reg_can_3v3: regulator-can-3v3 { 58 compatible = "regulator-fixed"; 59 regulator-name = "can-3v3"; 60 regulator-min-microvolt = <3300000>; 61 regulator-max-microvolt = <3300000>; 62 gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; 63 }; 64 65 sound-wm8960 { 66 compatible = "fsl,imx-audio-wm8960"; 67 model = "wm8960-audio"; 68 audio-cpu = <&sai2>; 69 audio-codec = <&codec>; 70 audio-asrc = <&asrc>; 71 hp-det-gpio = <&gpio5 4 0>; 72 audio-routing = 73 "Headphone Jack", "HP_L", 74 "Headphone Jack", "HP_R", 75 "Ext Spk", "SPK_LP", 76 "Ext Spk", "SPK_LN", 77 "Ext Spk", "SPK_RP", 78 "Ext Spk", "SPK_RN", 79 "LINPUT2", "Mic Jack", 80 "LINPUT3", "Mic Jack", 81 "RINPUT1", "AMIC", 82 "RINPUT2", "AMIC", 83 "Mic Jack", "MICB", 84 "AMIC", "MICB"; 85 }; 86 87 spi-4 { 88 compatible = "spi-gpio"; 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_spi4>; 91 status = "okay"; 92 sck-gpios = <&gpio5 11 0>; 93 mosi-gpios = <&gpio5 10 0>; 94 cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; 95 num-chipselects = <1>; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 99 gpio_spi: gpio@0 { 100 compatible = "fairchild,74hc595"; 101 gpio-controller; 102 #gpio-cells = <2>; 103 reg = <0>; 104 registers-number = <1>; 105 spi-max-frequency = <100000>; 106 enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; 107 }; 108 }; 109 110 panel { 111 compatible = "innolux,at043tn24"; 112 backlight = <&backlight_display>; 113 114 port { 115 panel_in: endpoint { 116 remote-endpoint = <&display_out>; 117 }; 118 }; 119 }; 120}; 121 122&clks { 123 assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; 124 assigned-clock-rates = <786432000>; 125}; 126 127&i2c2 { 128 clock-frequency = <100000>; 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_i2c2>; 131 status = "okay"; 132 133 codec: wm8960@1a { 134 #sound-dai-cells = <0>; 135 compatible = "wlf,wm8960"; 136 reg = <0x1a>; 137 wlf,shared-lrclk; 138 wlf,hp-cfg = <3 2 3>; 139 wlf,gpio-cfg = <1 3>; 140 clocks = <&clks IMX6UL_CLK_SAI2>; 141 clock-names = "mclk"; 142 }; 143 144 camera@3c { 145 compatible = "ovti,ov5640"; 146 reg = <0x3c>; 147 pinctrl-names = "default"; 148 pinctrl-0 = <&pinctrl_camera_clock>; 149 clocks = <&clks IMX6UL_CLK_CSI>; 150 clock-names = "xclk"; 151 powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>; 152 reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; 153 154 port { 155 ov5640_to_parallel: endpoint { 156 remote-endpoint = <¶llel_from_ov5640>; 157 bus-width = <8>; 158 data-shift = <2>; /* lines 9:2 are used */ 159 hsync-active = <0>; 160 vsync-active = <0>; 161 pclk-sample = <1>; 162 }; 163 }; 164 }; 165}; 166 167&csi { 168 pinctrl-names = "default"; 169 pinctrl-0 = <&pinctrl_csi1>; 170 status = "okay"; 171 172 port { 173 parallel_from_ov5640: endpoint { 174 remote-endpoint = <&ov5640_to_parallel>; 175 bus-type = <MEDIA_BUS_TYPE_PARALLEL>; 176 }; 177 }; 178}; 179 180&fec1 { 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_enet1>; 183 phy-mode = "rmii"; 184 phy-handle = <ðphy0>; 185 phy-supply = <®_peri_3v3>; 186 status = "okay"; 187}; 188 189&fec2 { 190 pinctrl-names = "default"; 191 pinctrl-0 = <&pinctrl_enet2>; 192 phy-mode = "rmii"; 193 phy-handle = <ðphy1>; 194 phy-supply = <®_peri_3v3>; 195 status = "okay"; 196 197 mdio { 198 #address-cells = <1>; 199 #size-cells = <0>; 200 201 ethphy0: ethernet-phy@2 { 202 compatible = "ethernet-phy-id0022.1560"; 203 reg = <2>; 204 micrel,led-mode = <1>; 205 clocks = <&clks IMX6UL_CLK_ENET_REF>; 206 clock-names = "rmii-ref"; 207 208 }; 209 210 ethphy1: ethernet-phy@1 { 211 compatible = "ethernet-phy-id0022.1560"; 212 reg = <1>; 213 micrel,led-mode = <1>; 214 clocks = <&clks IMX6UL_CLK_ENET2_REF>; 215 clock-names = "rmii-ref"; 216 }; 217 }; 218}; 219 220&can1 { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_flexcan1>; 223 xceiver-supply = <®_can_3v3>; 224 status = "okay"; 225}; 226 227&can2 { 228 pinctrl-names = "default"; 229 pinctrl-0 = <&pinctrl_flexcan2>; 230 xceiver-supply = <®_can_3v3>; 231 status = "okay"; 232}; 233 234&gpio_spi { 235 eth0-phy-hog { 236 gpio-hog; 237 gpios = <1 GPIO_ACTIVE_HIGH>; 238 output-high; 239 line-name = "eth0-phy"; 240 }; 241 242 eth1-phy-hog { 243 gpio-hog; 244 gpios = <2 GPIO_ACTIVE_HIGH>; 245 output-high; 246 line-name = "eth1-phy"; 247 }; 248}; 249 250&i2c1 { 251 clock-frequency = <100000>; 252 pinctrl-names = "default"; 253 pinctrl-0 = <&pinctrl_i2c1>; 254 status = "okay"; 255 256 magnetometer@e { 257 compatible = "fsl,mag3110"; 258 reg = <0x0e>; 259 vdd-supply = <®_peri_3v3>; 260 vddio-supply = <®_peri_3v3>; 261 }; 262}; 263 264&lcdif { 265 assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; 266 assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; 267 pinctrl-names = "default"; 268 pinctrl-0 = <&pinctrl_lcdif_dat 269 &pinctrl_lcdif_ctrl>; 270 status = "okay"; 271 272 port { 273 display_out: endpoint { 274 remote-endpoint = <&panel_in>; 275 }; 276 }; 277}; 278 279&pwm1 { 280 #pwm-cells = <2>; 281 pinctrl-names = "default"; 282 pinctrl-0 = <&pinctrl_pwm1>; 283 status = "okay"; 284}; 285 286&qspi { 287 pinctrl-names = "default"; 288 pinctrl-0 = <&pinctrl_qspi>; 289 status = "okay"; 290 291 flash0: flash@0 { 292 #address-cells = <1>; 293 #size-cells = <1>; 294 compatible = "micron,n25q256a", "jedec,spi-nor"; 295 spi-max-frequency = <29000000>; 296 spi-rx-bus-width = <4>; 297 spi-tx-bus-width = <1>; 298 reg = <0>; 299 }; 300}; 301 302&sai2 { 303 pinctrl-names = "default"; 304 pinctrl-0 = <&pinctrl_sai2>; 305 assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, 306 <&clks IMX6UL_CLK_SAI2>; 307 assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; 308 assigned-clock-rates = <0>, <12288000>; 309 fsl,sai-mclk-direction-output; 310 status = "okay"; 311}; 312 313&snvs_poweroff { 314 status = "okay"; 315}; 316 317&snvs_pwrkey { 318 status = "okay"; 319}; 320 321&tsc { 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_tsc>; 324 xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; 325 measure-delay-time = <0xffff>; 326 pre-charge-time = <0xfff>; 327 status = "okay"; 328}; 329 330&uart1 { 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pinctrl_uart1>; 333 status = "okay"; 334}; 335 336&uart2 { 337 pinctrl-names = "default"; 338 pinctrl-0 = <&pinctrl_uart2>; 339 uart-has-rtscts; 340 status = "okay"; 341}; 342 343&usbotg1 { 344 dr_mode = "otg"; 345 pinctrl-names = "default"; 346 pinctrl-0 = <&pinctrl_usb_otg1>; 347 status = "okay"; 348}; 349 350&usbotg2 { 351 dr_mode = "host"; 352 disable-over-current; 353 status = "okay"; 354}; 355 356&usbphy1 { 357 fsl,tx-d-cal = <106>; 358}; 359 360&usbphy2 { 361 fsl,tx-d-cal = <106>; 362}; 363 364&usdhc1 { 365 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 366 pinctrl-0 = <&pinctrl_usdhc1>; 367 pinctrl-1 = <&pinctrl_usdhc1_100mhz>; 368 pinctrl-2 = <&pinctrl_usdhc1_200mhz>; 369 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; 370 keep-power-in-suspend; 371 wakeup-source; 372 vmmc-supply = <®_sd1_vmmc>; 373 status = "okay"; 374}; 375 376&usdhc2 { 377 pinctrl-names = "default"; 378 pinctrl-0 = <&pinctrl_usdhc2>; 379 no-1-8-v; 380 broken-cd; 381 keep-power-in-suspend; 382 wakeup-source; 383 status = "okay"; 384}; 385 386&wdog1 { 387 pinctrl-names = "default"; 388 pinctrl-0 = <&pinctrl_wdog>; 389 fsl,ext-reset-output; 390}; 391 392&iomuxc { 393 pinctrl-names = "default"; 394 395 pinctrl_camera_clock: cameraclockgrp { 396 fsl,pins = < 397 MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 398 >; 399 }; 400 401 pinctrl_csi1: csi1grp { 402 fsl,pins = < 403 MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 404 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 405 MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 406 MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 407 MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 408 MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 409 MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 410 MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 411 MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 412 MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 413 MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 414 >; 415 }; 416 417 pinctrl_enet1: enet1grp { 418 fsl,pins = < 419 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 420 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 421 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 422 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 423 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 424 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 425 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 426 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 427 >; 428 }; 429 430 pinctrl_enet2: enet2grp { 431 fsl,pins = < 432 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 433 MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 434 MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 435 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 436 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 437 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 438 MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 439 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 440 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 441 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 442 >; 443 }; 444 445 pinctrl_flexcan1: flexcan1grp { 446 fsl,pins = < 447 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 448 MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 449 >; 450 }; 451 452 pinctrl_flexcan2: flexcan2grp { 453 fsl,pins = < 454 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 455 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 456 >; 457 }; 458 459 pinctrl_i2c1: i2c1grp { 460 fsl,pins = < 461 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 462 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 463 >; 464 }; 465 466 pinctrl_i2c2: i2c2grp { 467 fsl,pins = < 468 MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 469 MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 470 >; 471 }; 472 473 pinctrl_lcdif_dat: lcdifdatgrp { 474 fsl,pins = < 475 MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 476 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 477 MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 478 MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 479 MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 480 MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 481 MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 482 MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 483 MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 484 MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 485 MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 486 MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 487 MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 488 MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 489 MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 490 MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 491 MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 492 MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 493 MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 494 MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 495 MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 496 MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 497 MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 498 MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 499 >; 500 }; 501 502 pinctrl_lcdif_ctrl: lcdifctrlgrp { 503 fsl,pins = < 504 MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 505 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 506 MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 507 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 508 /* used for lcd reset */ 509 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 510 >; 511 }; 512 513 pinctrl_qspi: qspigrp { 514 fsl,pins = < 515 MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 516 MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 517 MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 518 MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 519 MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 520 MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 521 >; 522 }; 523 524 pinctrl_sai2: sai2grp { 525 fsl,pins = < 526 MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 527 MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 528 MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 529 MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 530 MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 531 MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 532 >; 533 }; 534 535 pinctrl_peri_3v3: peri3v3grp { 536 fsl,pins = < 537 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 538 >; 539 }; 540 541 pinctrl_pwm1: pwm1grp { 542 fsl,pins = < 543 MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 544 >; 545 }; 546 547 pinctrl_sim2: sim2grp { 548 fsl,pins = < 549 MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 550 MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 551 MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 552 MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 553 MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 554 MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 555 >; 556 }; 557 558 pinctrl_spi4: spi4grp { 559 fsl,pins = < 560 MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 561 MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 562 MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 563 MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 564 >; 565 }; 566 567 pinctrl_tsc: tscgrp { 568 fsl,pins = < 569 MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 570 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 571 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 572 MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 573 >; 574 }; 575 576 pinctrl_uart1: uart1grp { 577 fsl,pins = < 578 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 579 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 580 >; 581 }; 582 583 pinctrl_uart2: uart2grp { 584 fsl,pins = < 585 MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 586 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 587 MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 588 MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 589 >; 590 }; 591 592 pinctrl_usb_otg1: usbotg1grp { 593 fsl,pins = < 594 MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 595 >; 596 }; 597 598 pinctrl_usdhc1: usdhc1grp { 599 fsl,pins = < 600 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 601 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 602 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 603 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 604 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 605 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 606 MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ 607 MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ 608 MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ 609 >; 610 }; 611 612 pinctrl_usdhc1_100mhz: usdhc1grp100mhz { 613 fsl,pins = < 614 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 615 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 616 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 617 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 618 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 619 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 620 621 >; 622 }; 623 624 pinctrl_usdhc1_200mhz: usdhc1grp200mhz { 625 fsl,pins = < 626 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 627 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 628 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 629 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 630 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 631 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 632 >; 633 }; 634 635 pinctrl_usdhc2: usdhc2grp { 636 fsl,pins = < 637 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 638 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 639 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 640 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 641 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 642 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 643 >; 644 }; 645 646 pinctrl_wdog: wdoggrp { 647 fsl,pins = < 648 MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 649 >; 650 }; 651}; 652