1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2011 Freescale Semiconductor, Inc. 4// Copyright 2011 Linaro Ltd. 5 6#include <dt-bindings/clock/imx6qdl-clock.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/interrupt-controller/arm-gic.h> 9 10/ { 11 #address-cells = <1>; 12 #size-cells = <1>; 13 /* 14 * The decompressor and also some bootloaders rely on a 15 * pre-existing /chosen node to be available to insert the 16 * command line and merge other ATAGS info. 17 */ 18 chosen {}; 19 20 aliases { 21 ethernet0 = &fec; 22 can0 = &can1; 23 can1 = &can2; 24 gpio0 = &gpio1; 25 gpio1 = &gpio2; 26 gpio2 = &gpio3; 27 gpio3 = &gpio4; 28 gpio4 = &gpio5; 29 gpio5 = &gpio6; 30 gpio6 = &gpio7; 31 i2c0 = &i2c1; 32 i2c1 = &i2c2; 33 i2c2 = &i2c3; 34 ipu0 = &ipu1; 35 mmc0 = &usdhc1; 36 mmc1 = &usdhc2; 37 mmc2 = &usdhc3; 38 mmc3 = &usdhc4; 39 serial0 = &uart1; 40 serial1 = &uart2; 41 serial2 = &uart3; 42 serial3 = &uart4; 43 serial4 = &uart5; 44 spi0 = &ecspi1; 45 spi1 = &ecspi2; 46 spi2 = &ecspi3; 47 spi3 = &ecspi4; 48 usb0 = &usbotg; 49 usb1 = &usbh1; 50 usb2 = &usbh2; 51 usb3 = &usbh3; 52 usbphy0 = &usbphy1; 53 usbphy1 = &usbphy2; 54 }; 55 56 clocks { 57 ckil { 58 compatible = "fixed-clock"; 59 #clock-cells = <0>; 60 clock-frequency = <32768>; 61 }; 62 63 ckih1 { 64 compatible = "fixed-clock"; 65 #clock-cells = <0>; 66 clock-frequency = <0>; 67 }; 68 69 osc { 70 compatible = "fixed-clock"; 71 #clock-cells = <0>; 72 clock-frequency = <24000000>; 73 }; 74 }; 75 76 ldb: ldb { 77 #address-cells = <1>; 78 #size-cells = <0>; 79 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; 80 gpr = <&gpr>; 81 status = "disabled"; 82 83 lvds-channel@0 { 84 #address-cells = <1>; 85 #size-cells = <0>; 86 reg = <0>; 87 status = "disabled"; 88 89 port@0 { 90 reg = <0>; 91 92 lvds0_mux_0: endpoint { 93 remote-endpoint = <&ipu1_di0_lvds0>; 94 }; 95 }; 96 97 port@1 { 98 reg = <1>; 99 100 lvds0_mux_1: endpoint { 101 remote-endpoint = <&ipu1_di1_lvds0>; 102 }; 103 }; 104 }; 105 106 lvds-channel@1 { 107 #address-cells = <1>; 108 #size-cells = <0>; 109 reg = <1>; 110 status = "disabled"; 111 112 port@0 { 113 reg = <0>; 114 115 lvds1_mux_0: endpoint { 116 remote-endpoint = <&ipu1_di0_lvds1>; 117 }; 118 }; 119 120 port@1 { 121 reg = <1>; 122 123 lvds1_mux_1: endpoint { 124 remote-endpoint = <&ipu1_di1_lvds1>; 125 }; 126 }; 127 }; 128 }; 129 130 pmu: pmu { 131 compatible = "arm,cortex-a9-pmu"; 132 interrupt-parent = <&gpc>; 133 interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; 134 }; 135 136 usbphynop1: usbphynop1 { 137 compatible = "usb-nop-xceiv"; 138 #phy-cells = <0>; 139 }; 140 141 usbphynop2: usbphynop2 { 142 compatible = "usb-nop-xceiv"; 143 #phy-cells = <0>; 144 }; 145 146 soc: soc { 147 #address-cells = <1>; 148 #size-cells = <1>; 149 compatible = "simple-bus"; 150 interrupt-parent = <&gpc>; 151 ranges; 152 153 dma_apbh: dma-controller@110000 { 154 compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; 155 reg = <0x00110000 0x2000>; 156 interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, 157 <0 13 IRQ_TYPE_LEVEL_HIGH>, 158 <0 13 IRQ_TYPE_LEVEL_HIGH>, 159 <0 13 IRQ_TYPE_LEVEL_HIGH>; 160 #dma-cells = <1>; 161 dma-channels = <4>; 162 clocks = <&clks IMX6QDL_CLK_APBH_DMA>; 163 }; 164 165 gpmi: nand-controller@112000 { 166 compatible = "fsl,imx6q-gpmi-nand"; 167 reg = <0x00112000 0x2000>, <0x00114000 0x2000>; 168 reg-names = "gpmi-nand", "bch"; 169 interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; 170 interrupt-names = "bch"; 171 clocks = <&clks IMX6QDL_CLK_GPMI_IO>, 172 <&clks IMX6QDL_CLK_GPMI_APB>, 173 <&clks IMX6QDL_CLK_GPMI_BCH>, 174 <&clks IMX6QDL_CLK_GPMI_BCH_APB>, 175 <&clks IMX6QDL_CLK_PER1_BCH>; 176 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", 177 "gpmi_bch_apb", "per1_bch"; 178 dmas = <&dma_apbh 0>; 179 dma-names = "rx-tx"; 180 status = "disabled"; 181 }; 182 183 hdmi: hdmi@120000 { 184 reg = <0x00120000 0x9000>; 185 interrupts = <0 115 0x04>; 186 gpr = <&gpr>; 187 clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, 188 <&clks IMX6QDL_CLK_HDMI_ISFR>; 189 clock-names = "iahb", "isfr"; 190 status = "disabled"; 191 192 ports { 193 #address-cells = <1>; 194 #size-cells = <0>; 195 196 port@0 { 197 reg = <0>; 198 199 hdmi_mux_0: endpoint { 200 remote-endpoint = <&ipu1_di0_hdmi>; 201 }; 202 }; 203 204 port@1 { 205 reg = <1>; 206 207 hdmi_mux_1: endpoint { 208 remote-endpoint = <&ipu1_di1_hdmi>; 209 }; 210 }; 211 }; 212 }; 213 214 gpu_3d: gpu@130000 { 215 compatible = "vivante,gc"; 216 reg = <0x00130000 0x4000>; 217 interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; 218 clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, 219 <&clks IMX6QDL_CLK_GPU3D_CORE>, 220 <&clks IMX6QDL_CLK_GPU3D_SHADER>; 221 clock-names = "bus", "core", "shader"; 222 power-domains = <&pd_pu>; 223 #cooling-cells = <2>; 224 }; 225 226 gpu_2d: gpu@134000 { 227 compatible = "vivante,gc"; 228 reg = <0x00134000 0x4000>; 229 interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; 230 clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, 231 <&clks IMX6QDL_CLK_GPU2D_CORE>; 232 clock-names = "bus", "core"; 233 power-domains = <&pd_pu>; 234 #cooling-cells = <2>; 235 }; 236 237 timer@a00600 { 238 compatible = "arm,cortex-a9-twd-timer"; 239 reg = <0x00a00600 0x20>; 240 interrupts = <1 13 0xf01>; 241 interrupt-parent = <&intc>; 242 clocks = <&clks IMX6QDL_CLK_TWD>; 243 }; 244 245 intc: interrupt-controller@a01000 { 246 compatible = "arm,cortex-a9-gic"; 247 #interrupt-cells = <3>; 248 interrupt-controller; 249 reg = <0x00a01000 0x1000>, 250 <0x00a00100 0x100>; 251 interrupt-parent = <&intc>; 252 }; 253 254 L2: cache-controller@a02000 { 255 compatible = "arm,pl310-cache"; 256 reg = <0x00a02000 0x1000>; 257 interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; 258 cache-unified; 259 cache-level = <2>; 260 arm,tag-latency = <4 2 3>; 261 arm,data-latency = <4 2 3>; 262 arm,shared-override; 263 }; 264 265 pcie: pcie@1ffc000 { 266 compatible = "fsl,imx6q-pcie"; 267 reg = <0x01ffc000 0x04000>, 268 <0x01f00000 0x80000>; 269 reg-names = "dbi", "config"; 270 #address-cells = <3>; 271 #size-cells = <2>; 272 device_type = "pci"; 273 bus-range = <0x00 0xff>; 274 ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */ 275 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ 276 num-lanes = <1>; 277 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; 278 interrupt-names = "msi"; 279 #interrupt-cells = <1>; 280 interrupt-map-mask = <0 0 0 0x7>; 281 interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 282 <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, 283 <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, 284 <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; 285 clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, 286 <&clks IMX6QDL_CLK_LVDS1_GATE>, 287 <&clks IMX6QDL_CLK_PCIE_REF_125M>; 288 clock-names = "pcie", "pcie_bus", "pcie_phy"; 289 status = "disabled"; 290 }; 291 292 aips1: bus@2000000 { /* AIPS1 */ 293 compatible = "fsl,aips-bus", "simple-bus"; 294 #address-cells = <1>; 295 #size-cells = <1>; 296 reg = <0x02000000 0x100000>; 297 ranges; 298 299 spba-bus@2000000 { 300 compatible = "fsl,spba-bus", "simple-bus"; 301 #address-cells = <1>; 302 #size-cells = <1>; 303 reg = <0x02000000 0x40000>; 304 ranges; 305 306 spdif: spdif@2004000 { 307 compatible = "fsl,imx35-spdif"; 308 reg = <0x02004000 0x4000>; 309 interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; 310 dmas = <&sdma 14 18 0>, 311 <&sdma 15 18 0>; 312 dma-names = "rx", "tx"; 313 clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, 314 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, 315 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, 316 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>, 317 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; 318 clock-names = "core", "rxtx0", 319 "rxtx1", "rxtx2", 320 "rxtx3", "rxtx4", 321 "rxtx5", "rxtx6", 322 "rxtx7", "spba"; 323 status = "disabled"; 324 }; 325 326 ecspi1: spi@2008000 { 327 #address-cells = <1>; 328 #size-cells = <0>; 329 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; 330 reg = <0x02008000 0x4000>; 331 interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; 332 clocks = <&clks IMX6QDL_CLK_ECSPI1>, 333 <&clks IMX6QDL_CLK_ECSPI1>; 334 clock-names = "ipg", "per"; 335 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; 336 dma-names = "rx", "tx"; 337 status = "disabled"; 338 }; 339 340 ecspi2: spi@200c000 { 341 #address-cells = <1>; 342 #size-cells = <0>; 343 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; 344 reg = <0x0200c000 0x4000>; 345 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; 346 clocks = <&clks IMX6QDL_CLK_ECSPI2>, 347 <&clks IMX6QDL_CLK_ECSPI2>; 348 clock-names = "ipg", "per"; 349 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; 350 dma-names = "rx", "tx"; 351 status = "disabled"; 352 }; 353 354 ecspi3: spi@2010000 { 355 #address-cells = <1>; 356 #size-cells = <0>; 357 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; 358 reg = <0x02010000 0x4000>; 359 interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; 360 clocks = <&clks IMX6QDL_CLK_ECSPI3>, 361 <&clks IMX6QDL_CLK_ECSPI3>; 362 clock-names = "ipg", "per"; 363 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; 364 dma-names = "rx", "tx"; 365 status = "disabled"; 366 }; 367 368 ecspi4: spi@2014000 { 369 #address-cells = <1>; 370 #size-cells = <0>; 371 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; 372 reg = <0x02014000 0x4000>; 373 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; 374 clocks = <&clks IMX6QDL_CLK_ECSPI4>, 375 <&clks IMX6QDL_CLK_ECSPI4>; 376 clock-names = "ipg", "per"; 377 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; 378 dma-names = "rx", "tx"; 379 status = "disabled"; 380 }; 381 382 uart1: serial@2020000 { 383 compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; 384 reg = <0x02020000 0x4000>; 385 interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; 386 clocks = <&clks IMX6QDL_CLK_UART_IPG>, 387 <&clks IMX6QDL_CLK_UART_SERIAL>; 388 clock-names = "ipg", "per"; 389 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; 390 dma-names = "rx", "tx"; 391 status = "disabled"; 392 }; 393 394 esai: esai@2024000 { 395 #sound-dai-cells = <0>; 396 compatible = "fsl,imx35-esai"; 397 reg = <0x02024000 0x4000>; 398 interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; 399 clocks = <&clks IMX6QDL_CLK_ESAI_IPG>, 400 <&clks IMX6QDL_CLK_ESAI_MEM>, 401 <&clks IMX6QDL_CLK_ESAI_EXTAL>, 402 <&clks IMX6QDL_CLK_ESAI_IPG>, 403 <&clks IMX6QDL_CLK_SPBA>; 404 clock-names = "core", "mem", "extal", "fsys", "spba"; 405 dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; 406 dma-names = "rx", "tx"; 407 status = "disabled"; 408 }; 409 410 ssi1: ssi@2028000 { 411 #sound-dai-cells = <0>; 412 compatible = "fsl,imx6q-ssi", 413 "fsl,imx51-ssi"; 414 reg = <0x02028000 0x4000>; 415 interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; 416 clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, 417 <&clks IMX6QDL_CLK_SSI1>; 418 clock-names = "ipg", "baud"; 419 dmas = <&sdma 37 1 0>, 420 <&sdma 38 1 0>; 421 dma-names = "rx", "tx"; 422 fsl,fifo-depth = <15>; 423 status = "disabled"; 424 }; 425 426 ssi2: ssi@202c000 { 427 #sound-dai-cells = <0>; 428 compatible = "fsl,imx6q-ssi", 429 "fsl,imx51-ssi"; 430 reg = <0x0202c000 0x4000>; 431 interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; 432 clocks = <&clks IMX6QDL_CLK_SSI2_IPG>, 433 <&clks IMX6QDL_CLK_SSI2>; 434 clock-names = "ipg", "baud"; 435 dmas = <&sdma 41 1 0>, 436 <&sdma 42 1 0>; 437 dma-names = "rx", "tx"; 438 fsl,fifo-depth = <15>; 439 status = "disabled"; 440 }; 441 442 ssi3: ssi@2030000 { 443 #sound-dai-cells = <0>; 444 compatible = "fsl,imx6q-ssi", 445 "fsl,imx51-ssi"; 446 reg = <0x02030000 0x4000>; 447 interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; 448 clocks = <&clks IMX6QDL_CLK_SSI3_IPG>, 449 <&clks IMX6QDL_CLK_SSI3>; 450 clock-names = "ipg", "baud"; 451 dmas = <&sdma 45 1 0>, 452 <&sdma 46 1 0>; 453 dma-names = "rx", "tx"; 454 fsl,fifo-depth = <15>; 455 status = "disabled"; 456 }; 457 458 asrc: asrc@2034000 { 459 compatible = "fsl,imx53-asrc"; 460 reg = <0x02034000 0x4000>; 461 interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; 462 clocks = <&clks IMX6QDL_CLK_ASRC_IPG>, 463 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>, 464 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 465 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 466 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 467 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>, 468 <&clks IMX6QDL_CLK_SPBA>; 469 clock-names = "mem", "ipg", "asrck_0", 470 "asrck_1", "asrck_2", "asrck_3", "asrck_4", 471 "asrck_5", "asrck_6", "asrck_7", "asrck_8", 472 "asrck_9", "asrck_a", "asrck_b", "asrck_c", 473 "asrck_d", "asrck_e", "asrck_f", "spba"; 474 dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, 475 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; 476 dma-names = "rxa", "rxb", "rxc", 477 "txa", "txb", "txc"; 478 fsl,asrc-rate = <48000>; 479 fsl,asrc-width = <16>; 480 status = "okay"; 481 }; 482 483 spba-bus@203c000 { 484 reg = <0x0203c000 0x4000>; 485 }; 486 }; 487 488 vpu: vpu@2040000 { 489 compatible = "cnm,coda960"; 490 reg = <0x02040000 0x3c000>; 491 interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, 492 <0 3 IRQ_TYPE_LEVEL_HIGH>; 493 interrupt-names = "bit", "jpeg"; 494 clocks = <&clks IMX6QDL_CLK_VPU_AXI>, 495 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; 496 clock-names = "per", "ahb"; 497 power-domains = <&pd_pu>; 498 resets = <&src 1>; 499 iram = <&ocram>; 500 }; 501 502 aipstz@207c000 { /* AIPSTZ1 */ 503 reg = <0x0207c000 0x4000>; 504 }; 505 506 pwm1: pwm@2080000 { 507 #pwm-cells = <3>; 508 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; 509 reg = <0x02080000 0x4000>; 510 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; 511 clocks = <&clks IMX6QDL_CLK_IPG>, 512 <&clks IMX6QDL_CLK_PWM1>; 513 clock-names = "ipg", "per"; 514 status = "disabled"; 515 }; 516 517 pwm2: pwm@2084000 { 518 #pwm-cells = <3>; 519 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; 520 reg = <0x02084000 0x4000>; 521 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; 522 clocks = <&clks IMX6QDL_CLK_IPG>, 523 <&clks IMX6QDL_CLK_PWM2>; 524 clock-names = "ipg", "per"; 525 status = "disabled"; 526 }; 527 528 pwm3: pwm@2088000 { 529 #pwm-cells = <3>; 530 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; 531 reg = <0x02088000 0x4000>; 532 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; 533 clocks = <&clks IMX6QDL_CLK_IPG>, 534 <&clks IMX6QDL_CLK_PWM3>; 535 clock-names = "ipg", "per"; 536 status = "disabled"; 537 }; 538 539 pwm4: pwm@208c000 { 540 #pwm-cells = <3>; 541 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; 542 reg = <0x0208c000 0x4000>; 543 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; 544 clocks = <&clks IMX6QDL_CLK_IPG>, 545 <&clks IMX6QDL_CLK_PWM4>; 546 clock-names = "ipg", "per"; 547 status = "disabled"; 548 }; 549 550 can1: can@2090000 { 551 compatible = "fsl,imx6q-flexcan"; 552 reg = <0x02090000 0x4000>; 553 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; 554 clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, 555 <&clks IMX6QDL_CLK_CAN1_SERIAL>; 556 clock-names = "ipg", "per"; 557 fsl,stop-mode = <&gpr 0x34 28>; 558 status = "disabled"; 559 }; 560 561 can2: can@2094000 { 562 compatible = "fsl,imx6q-flexcan"; 563 reg = <0x02094000 0x4000>; 564 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; 565 clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, 566 <&clks IMX6QDL_CLK_CAN2_SERIAL>; 567 clock-names = "ipg", "per"; 568 fsl,stop-mode = <&gpr 0x34 29>; 569 status = "disabled"; 570 }; 571 572 gpt: timer@2098000 { 573 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; 574 reg = <0x02098000 0x4000>; 575 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; 576 clocks = <&clks IMX6QDL_CLK_GPT_IPG>, 577 <&clks IMX6QDL_CLK_GPT_IPG_PER>, 578 <&clks IMX6QDL_CLK_GPT_3M>; 579 clock-names = "ipg", "per", "osc_per"; 580 }; 581 582 gpio1: gpio@209c000 { 583 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 584 reg = <0x0209c000 0x4000>; 585 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, 586 <0 67 IRQ_TYPE_LEVEL_HIGH>; 587 gpio-controller; 588 #gpio-cells = <2>; 589 interrupt-controller; 590 #interrupt-cells = <2>; 591 }; 592 593 gpio2: gpio@20a0000 { 594 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 595 reg = <0x020a0000 0x4000>; 596 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, 597 <0 69 IRQ_TYPE_LEVEL_HIGH>; 598 gpio-controller; 599 #gpio-cells = <2>; 600 interrupt-controller; 601 #interrupt-cells = <2>; 602 }; 603 604 gpio3: gpio@20a4000 { 605 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 606 reg = <0x020a4000 0x4000>; 607 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, 608 <0 71 IRQ_TYPE_LEVEL_HIGH>; 609 gpio-controller; 610 #gpio-cells = <2>; 611 interrupt-controller; 612 #interrupt-cells = <2>; 613 }; 614 615 gpio4: gpio@20a8000 { 616 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 617 reg = <0x020a8000 0x4000>; 618 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, 619 <0 73 IRQ_TYPE_LEVEL_HIGH>; 620 gpio-controller; 621 #gpio-cells = <2>; 622 interrupt-controller; 623 #interrupt-cells = <2>; 624 }; 625 626 gpio5: gpio@20ac000 { 627 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 628 reg = <0x020ac000 0x4000>; 629 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, 630 <0 75 IRQ_TYPE_LEVEL_HIGH>; 631 gpio-controller; 632 #gpio-cells = <2>; 633 interrupt-controller; 634 #interrupt-cells = <2>; 635 }; 636 637 gpio6: gpio@20b0000 { 638 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 639 reg = <0x020b0000 0x4000>; 640 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>, 641 <0 77 IRQ_TYPE_LEVEL_HIGH>; 642 gpio-controller; 643 #gpio-cells = <2>; 644 interrupt-controller; 645 #interrupt-cells = <2>; 646 }; 647 648 gpio7: gpio@20b4000 { 649 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; 650 reg = <0x020b4000 0x4000>; 651 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>, 652 <0 79 IRQ_TYPE_LEVEL_HIGH>; 653 gpio-controller; 654 #gpio-cells = <2>; 655 interrupt-controller; 656 #interrupt-cells = <2>; 657 }; 658 659 kpp: keypad@20b8000 { 660 compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; 661 reg = <0x020b8000 0x4000>; 662 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; 663 clocks = <&clks IMX6QDL_CLK_IPG>; 664 status = "disabled"; 665 }; 666 667 wdog1: watchdog@20bc000 { 668 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; 669 reg = <0x020bc000 0x4000>; 670 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; 671 clocks = <&clks IMX6QDL_CLK_IPG>; 672 }; 673 674 wdog2: watchdog@20c0000 { 675 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; 676 reg = <0x020c0000 0x4000>; 677 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; 678 clocks = <&clks IMX6QDL_CLK_IPG>; 679 status = "disabled"; 680 }; 681 682 clks: clock-controller@20c4000 { 683 compatible = "fsl,imx6q-ccm"; 684 reg = <0x020c4000 0x4000>; 685 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, 686 <0 88 IRQ_TYPE_LEVEL_HIGH>; 687 #clock-cells = <1>; 688 }; 689 690 anatop: anatop@20c8000 { 691 compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd"; 692 reg = <0x020c8000 0x1000>; 693 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, 694 <0 54 IRQ_TYPE_LEVEL_HIGH>, 695 <0 127 IRQ_TYPE_LEVEL_HIGH>; 696 697 reg_vdd1p1: regulator-1p1 { 698 compatible = "fsl,anatop-regulator"; 699 regulator-name = "vdd1p1"; 700 regulator-min-microvolt = <1000000>; 701 regulator-max-microvolt = <1200000>; 702 regulator-always-on; 703 anatop-reg-offset = <0x110>; 704 anatop-vol-bit-shift = <8>; 705 anatop-vol-bit-width = <5>; 706 anatop-min-bit-val = <4>; 707 anatop-min-voltage = <800000>; 708 anatop-max-voltage = <1375000>; 709 anatop-enable-bit = <0>; 710 }; 711 712 reg_vdd3p0: regulator-3p0 { 713 compatible = "fsl,anatop-regulator"; 714 regulator-name = "vdd3p0"; 715 regulator-min-microvolt = <2800000>; 716 regulator-max-microvolt = <3150000>; 717 regulator-always-on; 718 anatop-reg-offset = <0x120>; 719 anatop-vol-bit-shift = <8>; 720 anatop-vol-bit-width = <5>; 721 anatop-min-bit-val = <0>; 722 anatop-min-voltage = <2625000>; 723 anatop-max-voltage = <3400000>; 724 anatop-enable-bit = <0>; 725 }; 726 727 reg_vdd2p5: regulator-2p5 { 728 compatible = "fsl,anatop-regulator"; 729 regulator-name = "vdd2p5"; 730 regulator-min-microvolt = <2250000>; 731 regulator-max-microvolt = <2750000>; 732 regulator-always-on; 733 anatop-reg-offset = <0x130>; 734 anatop-vol-bit-shift = <8>; 735 anatop-vol-bit-width = <5>; 736 anatop-min-bit-val = <0>; 737 anatop-min-voltage = <2100000>; 738 anatop-max-voltage = <2875000>; 739 anatop-enable-bit = <0>; 740 }; 741 742 reg_arm: regulator-vddcore { 743 compatible = "fsl,anatop-regulator"; 744 regulator-name = "vddarm"; 745 regulator-min-microvolt = <725000>; 746 regulator-max-microvolt = <1450000>; 747 regulator-always-on; 748 anatop-reg-offset = <0x140>; 749 anatop-vol-bit-shift = <0>; 750 anatop-vol-bit-width = <5>; 751 anatop-delay-reg-offset = <0x170>; 752 anatop-delay-bit-shift = <24>; 753 anatop-delay-bit-width = <2>; 754 anatop-min-bit-val = <1>; 755 anatop-min-voltage = <725000>; 756 anatop-max-voltage = <1450000>; 757 }; 758 759 reg_pu: regulator-vddpu { 760 compatible = "fsl,anatop-regulator"; 761 regulator-name = "vddpu"; 762 regulator-min-microvolt = <725000>; 763 regulator-max-microvolt = <1450000>; 764 regulator-enable-ramp-delay = <380>; 765 anatop-reg-offset = <0x140>; 766 anatop-vol-bit-shift = <9>; 767 anatop-vol-bit-width = <5>; 768 anatop-delay-reg-offset = <0x170>; 769 anatop-delay-bit-shift = <26>; 770 anatop-delay-bit-width = <2>; 771 anatop-min-bit-val = <1>; 772 anatop-min-voltage = <725000>; 773 anatop-max-voltage = <1450000>; 774 }; 775 776 reg_soc: regulator-vddsoc { 777 compatible = "fsl,anatop-regulator"; 778 regulator-name = "vddsoc"; 779 regulator-min-microvolt = <725000>; 780 regulator-max-microvolt = <1450000>; 781 regulator-always-on; 782 anatop-reg-offset = <0x140>; 783 anatop-vol-bit-shift = <18>; 784 anatop-vol-bit-width = <5>; 785 anatop-delay-reg-offset = <0x170>; 786 anatop-delay-bit-shift = <28>; 787 anatop-delay-bit-width = <2>; 788 anatop-min-bit-val = <1>; 789 anatop-min-voltage = <725000>; 790 anatop-max-voltage = <1450000>; 791 }; 792 793 tempmon: tempmon { 794 compatible = "fsl,imx6q-tempmon"; 795 interrupt-parent = <&gpc>; 796 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; 797 fsl,tempmon = <&anatop>; 798 nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; 799 nvmem-cell-names = "calib", "temp_grade"; 800 clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 801 #thermal-sensor-cells = <0>; 802 }; 803 }; 804 805 usbphy1: usbphy@20c9000 { 806 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; 807 reg = <0x020c9000 0x1000>; 808 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; 809 clocks = <&clks IMX6QDL_CLK_USBPHY1>; 810 fsl,anatop = <&anatop>; 811 }; 812 813 usbphy2: usbphy@20ca000 { 814 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; 815 reg = <0x020ca000 0x1000>; 816 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; 817 clocks = <&clks IMX6QDL_CLK_USBPHY2>; 818 fsl,anatop = <&anatop>; 819 }; 820 821 snvs: snvs@20cc000 { 822 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; 823 reg = <0x020cc000 0x4000>; 824 825 snvs_rtc: snvs-rtc-lp { 826 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 827 regmap = <&snvs>; 828 offset = <0x34>; 829 interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, 830 <0 20 IRQ_TYPE_LEVEL_HIGH>; 831 }; 832 833 snvs_poweroff: snvs-poweroff { 834 compatible = "syscon-poweroff"; 835 regmap = <&snvs>; 836 offset = <0x38>; 837 value = <0x60>; 838 mask = <0x60>; 839 status = "disabled"; 840 }; 841 842 snvs_pwrkey: snvs-powerkey { 843 compatible = "fsl,sec-v4.0-pwrkey"; 844 regmap = <&snvs>; 845 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 846 linux,keycode = <KEY_POWER>; 847 wakeup-source; 848 status = "disabled"; 849 }; 850 851 snvs_lpgpr: snvs-lpgpr { 852 compatible = "fsl,imx6q-snvs-lpgpr"; 853 }; 854 }; 855 856 epit1: epit@20d0000 { /* EPIT1 */ 857 reg = <0x020d0000 0x4000>; 858 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; 859 }; 860 861 epit2: epit@20d4000 { /* EPIT2 */ 862 reg = <0x020d4000 0x4000>; 863 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; 864 }; 865 866 src: reset-controller@20d8000 { 867 compatible = "fsl,imx6q-src", "fsl,imx51-src"; 868 reg = <0x020d8000 0x4000>; 869 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, 870 <0 96 IRQ_TYPE_LEVEL_HIGH>; 871 #reset-cells = <1>; 872 }; 873 874 gpc: gpc@20dc000 { 875 compatible = "fsl,imx6q-gpc"; 876 reg = <0x020dc000 0x4000>; 877 interrupt-controller; 878 #interrupt-cells = <3>; 879 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; 880 interrupt-parent = <&intc>; 881 clocks = <&clks IMX6QDL_CLK_IPG>; 882 clock-names = "ipg"; 883 884 pgc { 885 #address-cells = <1>; 886 #size-cells = <0>; 887 888 power-domain@0 { 889 reg = <0>; 890 #power-domain-cells = <0>; 891 }; 892 pd_pu: power-domain@1 { 893 reg = <1>; 894 #power-domain-cells = <0>; 895 power-supply = <®_pu>; 896 clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, 897 <&clks IMX6QDL_CLK_GPU3D_SHADER>, 898 <&clks IMX6QDL_CLK_GPU2D_CORE>, 899 <&clks IMX6QDL_CLK_GPU2D_AXI>, 900 <&clks IMX6QDL_CLK_OPENVG_AXI>, 901 <&clks IMX6QDL_CLK_VPU_AXI>; 902 }; 903 }; 904 }; 905 906 gpr: iomuxc-gpr@20e0000 { 907 compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; 908 reg = <0x20e0000 0x38>; 909 910 mux: mux-controller { 911 compatible = "mmio-mux"; 912 #mux-control-cells = <1>; 913 }; 914 }; 915 916 iomuxc: pinctrl@20e0000 { 917 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; 918 reg = <0x20e0000 0x4000>; 919 }; 920 921 dcic1: dcic@20e4000 { 922 reg = <0x020e4000 0x4000>; 923 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; 924 }; 925 926 dcic2: dcic@20e8000 { 927 reg = <0x020e8000 0x4000>; 928 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; 929 }; 930 931 sdma: dma-controller@20ec000 { 932 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; 933 reg = <0x020ec000 0x4000>; 934 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; 935 clocks = <&clks IMX6QDL_CLK_IPG>, 936 <&clks IMX6QDL_CLK_SDMA>; 937 clock-names = "ipg", "ahb"; 938 #dma-cells = <3>; 939 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; 940 }; 941 }; 942 943 aips2: bus@2100000 { /* AIPS2 */ 944 compatible = "fsl,aips-bus", "simple-bus"; 945 #address-cells = <1>; 946 #size-cells = <1>; 947 reg = <0x02100000 0x100000>; 948 ranges; 949 950 crypto: crypto@2100000 { 951 compatible = "fsl,sec-v4.0"; 952 #address-cells = <1>; 953 #size-cells = <1>; 954 reg = <0x2100000 0x10000>; 955 ranges = <0 0x2100000 0x10000>; 956 clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, 957 <&clks IMX6QDL_CLK_CAAM_ACLK>, 958 <&clks IMX6QDL_CLK_CAAM_IPG>, 959 <&clks IMX6QDL_CLK_EIM_SLOW>; 960 clock-names = "mem", "aclk", "ipg", "emi_slow"; 961 962 sec_jr0: jr@1000 { 963 compatible = "fsl,sec-v4.0-job-ring"; 964 reg = <0x1000 0x1000>; 965 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 966 }; 967 968 sec_jr1: jr@2000 { 969 compatible = "fsl,sec-v4.0-job-ring"; 970 reg = <0x2000 0x1000>; 971 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 972 }; 973 }; 974 975 aipstz@217c000 { /* AIPSTZ2 */ 976 reg = <0x0217c000 0x4000>; 977 }; 978 979 usbotg: usb@2184000 { 980 compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; 981 reg = <0x02184000 0x200>; 982 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; 983 clocks = <&clks IMX6QDL_CLK_USBOH3>; 984 fsl,usbphy = <&usbphy1>; 985 fsl,usbmisc = <&usbmisc 0>; 986 ahb-burst-config = <0x0>; 987 tx-burst-size-dword = <0x10>; 988 rx-burst-size-dword = <0x10>; 989 status = "disabled"; 990 }; 991 992 usbh1: usb@2184200 { 993 compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; 994 reg = <0x02184200 0x200>; 995 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; 996 clocks = <&clks IMX6QDL_CLK_USBOH3>; 997 fsl,usbphy = <&usbphy2>; 998 fsl,usbmisc = <&usbmisc 1>; 999 dr_mode = "host"; 1000 ahb-burst-config = <0x0>; 1001 tx-burst-size-dword = <0x10>; 1002 rx-burst-size-dword = <0x10>; 1003 status = "disabled"; 1004 }; 1005 1006 usbh2: usb@2184400 { 1007 compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; 1008 reg = <0x02184400 0x200>; 1009 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; 1010 clocks = <&clks IMX6QDL_CLK_USBOH3>; 1011 fsl,usbphy = <&usbphynop1>; 1012 phy_type = "hsic"; 1013 fsl,usbmisc = <&usbmisc 2>; 1014 dr_mode = "host"; 1015 ahb-burst-config = <0x0>; 1016 tx-burst-size-dword = <0x10>; 1017 rx-burst-size-dword = <0x10>; 1018 status = "disabled"; 1019 }; 1020 1021 usbh3: usb@2184600 { 1022 compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; 1023 reg = <0x02184600 0x200>; 1024 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; 1025 clocks = <&clks IMX6QDL_CLK_USBOH3>; 1026 fsl,usbphy = <&usbphynop2>; 1027 phy_type = "hsic"; 1028 fsl,usbmisc = <&usbmisc 3>; 1029 dr_mode = "host"; 1030 ahb-burst-config = <0x0>; 1031 tx-burst-size-dword = <0x10>; 1032 rx-burst-size-dword = <0x10>; 1033 status = "disabled"; 1034 }; 1035 1036 usbmisc: usbmisc@2184800 { 1037 #index-cells = <1>; 1038 compatible = "fsl,imx6q-usbmisc"; 1039 reg = <0x02184800 0x200>; 1040 clocks = <&clks IMX6QDL_CLK_USBOH3>; 1041 }; 1042 1043 fec: ethernet@2188000 { 1044 compatible = "fsl,imx6q-fec"; 1045 reg = <0x02188000 0x4000>; 1046 interrupt-names = "int0", "pps"; 1047 interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, 1048 <0 119 IRQ_TYPE_LEVEL_HIGH>; 1049 clocks = <&clks IMX6QDL_CLK_ENET>, 1050 <&clks IMX6QDL_CLK_ENET>, 1051 <&clks IMX6QDL_CLK_ENET_REF>, 1052 <&clks IMX6QDL_CLK_ENET_REF_SEL>; 1053 clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; 1054 fsl,stop-mode = <&gpr 0x34 27>; 1055 nvmem-cells = <&fec_mac_addr>; 1056 nvmem-cell-names = "mac-address"; 1057 status = "disabled"; 1058 }; 1059 1060 mlb@218c000 { 1061 reg = <0x0218c000 0x4000>; 1062 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>, 1063 <0 117 IRQ_TYPE_LEVEL_HIGH>, 1064 <0 126 IRQ_TYPE_LEVEL_HIGH>; 1065 }; 1066 1067 usdhc1: mmc@2190000 { 1068 compatible = "fsl,imx6q-usdhc"; 1069 reg = <0x02190000 0x4000>; 1070 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; 1071 clocks = <&clks IMX6QDL_CLK_USDHC1>, 1072 <&clks IMX6QDL_CLK_USDHC1>, 1073 <&clks IMX6QDL_CLK_USDHC1>; 1074 clock-names = "ipg", "ahb", "per"; 1075 bus-width = <4>; 1076 status = "disabled"; 1077 }; 1078 1079 usdhc2: mmc@2194000 { 1080 compatible = "fsl,imx6q-usdhc"; 1081 reg = <0x02194000 0x4000>; 1082 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; 1083 clocks = <&clks IMX6QDL_CLK_USDHC2>, 1084 <&clks IMX6QDL_CLK_USDHC2>, 1085 <&clks IMX6QDL_CLK_USDHC2>; 1086 clock-names = "ipg", "ahb", "per"; 1087 bus-width = <4>; 1088 status = "disabled"; 1089 }; 1090 1091 usdhc3: mmc@2198000 { 1092 compatible = "fsl,imx6q-usdhc"; 1093 reg = <0x02198000 0x4000>; 1094 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; 1095 clocks = <&clks IMX6QDL_CLK_USDHC3>, 1096 <&clks IMX6QDL_CLK_USDHC3>, 1097 <&clks IMX6QDL_CLK_USDHC3>; 1098 clock-names = "ipg", "ahb", "per"; 1099 bus-width = <4>; 1100 status = "disabled"; 1101 }; 1102 1103 usdhc4: mmc@219c000 { 1104 compatible = "fsl,imx6q-usdhc"; 1105 reg = <0x0219c000 0x4000>; 1106 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; 1107 clocks = <&clks IMX6QDL_CLK_USDHC4>, 1108 <&clks IMX6QDL_CLK_USDHC4>, 1109 <&clks IMX6QDL_CLK_USDHC4>; 1110 clock-names = "ipg", "ahb", "per"; 1111 bus-width = <4>; 1112 status = "disabled"; 1113 }; 1114 1115 i2c1: i2c@21a0000 { 1116 #address-cells = <1>; 1117 #size-cells = <0>; 1118 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; 1119 reg = <0x021a0000 0x4000>; 1120 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; 1121 clocks = <&clks IMX6QDL_CLK_I2C1>; 1122 status = "disabled"; 1123 }; 1124 1125 i2c2: i2c@21a4000 { 1126 #address-cells = <1>; 1127 #size-cells = <0>; 1128 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; 1129 reg = <0x021a4000 0x4000>; 1130 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; 1131 clocks = <&clks IMX6QDL_CLK_I2C2>; 1132 status = "disabled"; 1133 }; 1134 1135 i2c3: i2c@21a8000 { 1136 #address-cells = <1>; 1137 #size-cells = <0>; 1138 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; 1139 reg = <0x021a8000 0x4000>; 1140 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>; 1141 clocks = <&clks IMX6QDL_CLK_I2C3>; 1142 status = "disabled"; 1143 }; 1144 1145 romcp@21ac000 { 1146 reg = <0x021ac000 0x4000>; 1147 }; 1148 1149 mmdc0: memory-controller@21b0000 { /* MMDC0 */ 1150 compatible = "fsl,imx6q-mmdc"; 1151 reg = <0x021b0000 0x4000>; 1152 clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; 1153 }; 1154 1155 mmdc1: memory-controller@21b4000 { /* MMDC1 */ 1156 compatible = "fsl,imx6q-mmdc"; 1157 reg = <0x021b4000 0x4000>; 1158 status = "disabled"; 1159 }; 1160 1161 weim: memory-controller@21b8000 { 1162 #address-cells = <2>; 1163 #size-cells = <1>; 1164 compatible = "fsl,imx6q-weim"; 1165 reg = <0x021b8000 0x4000>; 1166 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; 1167 clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; 1168 fsl,weim-cs-gpr = <&gpr>; 1169 status = "disabled"; 1170 }; 1171 1172 ocotp: efuse@21bc000 { 1173 compatible = "fsl,imx6q-ocotp", "syscon"; 1174 reg = <0x021bc000 0x4000>; 1175 clocks = <&clks IMX6QDL_CLK_IIM>; 1176 #address-cells = <1>; 1177 #size-cells = <1>; 1178 1179 cpu_speed_grade: speed-grade@10 { 1180 reg = <0x10 4>; 1181 }; 1182 1183 tempmon_calib: calib@38 { 1184 reg = <0x38 4>; 1185 }; 1186 1187 tempmon_temp_grade: temp-grade@20 { 1188 reg = <0x20 4>; 1189 }; 1190 1191 fec_mac_addr: mac-addr@88 { 1192 reg = <0x88 6>; 1193 }; 1194 }; 1195 1196 tzasc@21d0000 { /* TZASC1 */ 1197 reg = <0x021d0000 0x4000>; 1198 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; 1199 }; 1200 1201 tzasc@21d4000 { /* TZASC2 */ 1202 reg = <0x021d4000 0x4000>; 1203 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; 1204 }; 1205 1206 audmux: audmux@21d8000 { 1207 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; 1208 reg = <0x021d8000 0x4000>; 1209 status = "disabled"; 1210 }; 1211 1212 mipi_csi: mipi@21dc000 { 1213 compatible = "fsl,imx6-mipi-csi2"; 1214 reg = <0x021dc000 0x4000>; 1215 #address-cells = <1>; 1216 #size-cells = <0>; 1217 interrupts = <0 100 0x04>, <0 101 0x04>; 1218 clocks = <&clks IMX6QDL_CLK_HSI_TX>, 1219 <&clks IMX6QDL_CLK_VIDEO_27M>, 1220 <&clks IMX6QDL_CLK_EIM_PODF>; 1221 clock-names = "dphy", "ref", "pix"; 1222 status = "disabled"; 1223 }; 1224 1225 mipi_dsi: mipi@21e0000 { 1226 reg = <0x021e0000 0x4000>; 1227 status = "disabled"; 1228 1229 ports { 1230 #address-cells = <1>; 1231 #size-cells = <0>; 1232 1233 port@0 { 1234 reg = <0>; 1235 1236 mipi_mux_0: endpoint { 1237 remote-endpoint = <&ipu1_di0_mipi>; 1238 }; 1239 }; 1240 1241 port@1 { 1242 reg = <1>; 1243 1244 mipi_mux_1: endpoint { 1245 remote-endpoint = <&ipu1_di1_mipi>; 1246 }; 1247 }; 1248 }; 1249 }; 1250 1251 vdoa@21e4000 { 1252 compatible = "fsl,imx6q-vdoa"; 1253 reg = <0x021e4000 0x4000>; 1254 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; 1255 clocks = <&clks IMX6QDL_CLK_VDOA>; 1256 }; 1257 1258 uart2: serial@21e8000 { 1259 compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; 1260 reg = <0x021e8000 0x4000>; 1261 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; 1262 clocks = <&clks IMX6QDL_CLK_UART_IPG>, 1263 <&clks IMX6QDL_CLK_UART_SERIAL>; 1264 clock-names = "ipg", "per"; 1265 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; 1266 dma-names = "rx", "tx"; 1267 status = "disabled"; 1268 }; 1269 1270 uart3: serial@21ec000 { 1271 compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; 1272 reg = <0x021ec000 0x4000>; 1273 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; 1274 clocks = <&clks IMX6QDL_CLK_UART_IPG>, 1275 <&clks IMX6QDL_CLK_UART_SERIAL>; 1276 clock-names = "ipg", "per"; 1277 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; 1278 dma-names = "rx", "tx"; 1279 status = "disabled"; 1280 }; 1281 1282 uart4: serial@21f0000 { 1283 compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; 1284 reg = <0x021f0000 0x4000>; 1285 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; 1286 clocks = <&clks IMX6QDL_CLK_UART_IPG>, 1287 <&clks IMX6QDL_CLK_UART_SERIAL>; 1288 clock-names = "ipg", "per"; 1289 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; 1290 dma-names = "rx", "tx"; 1291 status = "disabled"; 1292 }; 1293 1294 uart5: serial@21f4000 { 1295 compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; 1296 reg = <0x021f4000 0x4000>; 1297 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; 1298 clocks = <&clks IMX6QDL_CLK_UART_IPG>, 1299 <&clks IMX6QDL_CLK_UART_SERIAL>; 1300 clock-names = "ipg", "per"; 1301 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; 1302 dma-names = "rx", "tx"; 1303 status = "disabled"; 1304 }; 1305 }; 1306 1307 ipu1: ipu@2400000 { 1308 #address-cells = <1>; 1309 #size-cells = <0>; 1310 compatible = "fsl,imx6q-ipu"; 1311 reg = <0x02400000 0x400000>; 1312 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>, 1313 <0 5 IRQ_TYPE_LEVEL_HIGH>; 1314 clocks = <&clks IMX6QDL_CLK_IPU1>, 1315 <&clks IMX6QDL_CLK_IPU1_DI0>, 1316 <&clks IMX6QDL_CLK_IPU1_DI1>; 1317 clock-names = "bus", "di0", "di1"; 1318 resets = <&src 2>; 1319 1320 ipu1_csi0: port@0 { 1321 reg = <0>; 1322 1323 ipu1_csi0_from_ipu1_csi0_mux: endpoint { 1324 remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>; 1325 }; 1326 }; 1327 1328 ipu1_csi1: port@1 { 1329 reg = <1>; 1330 }; 1331 1332 ipu1_di0: port@2 { 1333 #address-cells = <1>; 1334 #size-cells = <0>; 1335 reg = <2>; 1336 1337 ipu1_di0_disp0: endpoint@0 { 1338 reg = <0>; 1339 }; 1340 1341 ipu1_di0_hdmi: endpoint@1 { 1342 reg = <1>; 1343 remote-endpoint = <&hdmi_mux_0>; 1344 }; 1345 1346 ipu1_di0_mipi: endpoint@2 { 1347 reg = <2>; 1348 remote-endpoint = <&mipi_mux_0>; 1349 }; 1350 1351 ipu1_di0_lvds0: endpoint@3 { 1352 reg = <3>; 1353 remote-endpoint = <&lvds0_mux_0>; 1354 }; 1355 1356 ipu1_di0_lvds1: endpoint@4 { 1357 reg = <4>; 1358 remote-endpoint = <&lvds1_mux_0>; 1359 }; 1360 }; 1361 1362 ipu1_di1: port@3 { 1363 #address-cells = <1>; 1364 #size-cells = <0>; 1365 reg = <3>; 1366 1367 ipu1_di1_disp1: endpoint@0 { 1368 reg = <0>; 1369 }; 1370 1371 ipu1_di1_hdmi: endpoint@1 { 1372 reg = <1>; 1373 remote-endpoint = <&hdmi_mux_1>; 1374 }; 1375 1376 ipu1_di1_mipi: endpoint@2 { 1377 reg = <2>; 1378 remote-endpoint = <&mipi_mux_1>; 1379 }; 1380 1381 ipu1_di1_lvds0: endpoint@3 { 1382 reg = <3>; 1383 remote-endpoint = <&lvds0_mux_1>; 1384 }; 1385 1386 ipu1_di1_lvds1: endpoint@4 { 1387 reg = <4>; 1388 remote-endpoint = <&lvds1_mux_1>; 1389 }; 1390 }; 1391 }; 1392 }; 1393}; 1394