1/* 2 * Copyright 2015 Technologic Systems 3 * Copyright 2017 Savoir-Faire Linux 4 * 5 * This file is dual-licensed: you can use it either under the terms 6 * of the GPL or the X11 license, at your option. Note that this dual 7 * licensing only applies to this file, and not this project as a 8 * whole. 9 * 10 * a) This file is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * version 2 as published by the Free Software Foundation. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include <dt-bindings/gpio/gpio.h> 44#include <dt-bindings/interrupt-controller/irq.h> 45 46/ { 47 leds { 48 pinctrl-names = "default"; 49 pinctrl-0 = <&pinctrl_leds1>; 50 compatible = "gpio-leds"; 51 52 green-led { 53 label = "green-led"; 54 gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; 55 default-state = "on"; 56 }; 57 58 red-led { 59 label = "red-led"; 60 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; 61 default-state = "off"; 62 }; 63 64 yel-led { 65 label = "yellow-led"; 66 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; 67 default-state = "off"; 68 }; 69 70 blue-led { 71 label = "blue-led"; 72 gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; 73 default-state = "off"; 74 }; 75 76 en-usb-5v-led { 77 label = "en-usb-5v"; 78 gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; 79 default-state = "on"; 80 }; 81 82 sel-dc-usb-led { 83 label = "sel_dc_usb"; 84 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; 85 default-state = "off"; 86 }; 87 88 }; 89 90 reg_3p3v: regulator-3p3v { 91 compatible = "regulator-fixed"; 92 regulator-name = "3p3v"; 93 regulator-min-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>; 95 regulator-always-on; 96 }; 97 98 reg_can1_3v3: reg_can1_3v3 { 99 compatible = "regulator-fixed"; 100 regulator-name = "reg_can1_3v3"; 101 regulator-min-microvolt = <3300000>; 102 regulator-max-microvolt = <3300000>; 103 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; 104 enable-active-high; 105 }; 106 107 reg_can2_3v3: en-reg_can2_3v3 { 108 compatible = "regulator-fixed"; 109 regulator-name = "reg_can2_3v3"; 110 regulator-min-microvolt = <3300000>; 111 regulator-max-microvolt = <3300000>; 112 gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; 113 enable-active-high; 114 }; 115 116 reg_usb_otg_vbus: regulator-usb-otg-vbus { 117 compatible = "regulator-fixed"; 118 regulator-name = "usb_otg_vbus"; 119 regulator-min-microvolt = <5000000>; 120 regulator-max-microvolt = <5000000>; 121 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 122 enable-active-high; 123 }; 124 125 reg_wlan_vmmc: regulator_wlan_vmmc { 126 compatible = "regulator-fixed"; 127 regulator-name = "wlan_vmmc"; 128 regulator-min-microvolt = <1800000>; 129 regulator-max-microvolt = <1800000>; 130 gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>; 131 startup-delay-us = <70000>; 132 enable-active-high; 133 }; 134 135 sound-sgtl5000 { 136 audio-codec = <&sgtl5000>; 137 audio-routing = 138 "MIC_IN", "Mic Jack", 139 "Mic Jack", "Mic Bias", 140 "Headphone Jack", "HP_OUT"; 141 compatible = "fsl,imx-audio-sgtl5000"; 142 model = "On-board Codec"; 143 mux-ext-port = <3>; 144 mux-int-port = <1>; 145 ssi-controller = <&ssi1>; 146 }; 147}; 148 149&audmux { 150 status = "okay"; 151}; 152 153&can1 { 154 pinctrl-names = "default"; 155 pinctrl-0 = <&pinctrl_flexcan1>; 156 xceiver-supply = <®_can1_3v3>; 157 status = "okay"; 158}; 159 160&can2 { 161 pinctrl-names = "default"; 162 pinctrl-0 = <&pinctrl_flexcan2>; 163 xceiver-supply = <®_can2_3v3>; 164 status = "okay"; 165}; 166 167&ecspi1 { 168 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 169 pinctrl-names = "default"; 170 pinctrl-0 = <&pinctrl_ecspi1>; 171 status = "okay"; 172 173 n25q064: flash@0 { 174 compatible = "micron,n25q064", "jedec,spi-nor"; 175 reg = <0>; 176 spi-max-frequency = <20000000>; 177 }; 178}; 179 180&ecspi2 { 181 cs-gpios = < 182 &gpio5 31 GPIO_ACTIVE_LOW 183 &gpio7 12 GPIO_ACTIVE_LOW 184 &gpio5 18 GPIO_ACTIVE_LOW 185 >; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&pinctrl_ecspi2>; 188 status = "okay"; 189}; 190 191&fec { 192 pinctrl-names = "default"; 193 pinctrl-0 = <&pinctrl_enet>; 194 phy-mode = "rgmii"; 195 /delete-property/ interrupts; 196 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, 197 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; 198 fsl,err006687-workaround-present; 199 status = "okay"; 200}; 201 202&hdmi { 203 status = "okay"; 204}; 205 206&i2c1 { 207 clock-frequency = <100000>; 208 pinctrl-names = "default", "gpio"; 209 pinctrl-0 = <&pinctrl_i2c1>; 210 pinctrl-1 = <&pinctrl_i2c1_gpio>; 211 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 212 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 213 status = "okay"; 214 215 m41t00s: rtc@68 { 216 compatible = "m41t00"; 217 reg = <0x68>; 218 }; 219 220 isl12022: rtc@6f { 221 compatible = "isl,isl12022"; 222 reg = <0x6f>; 223 }; 224 225 gpio8: gpio@28 { 226 compatible = "technologic,ts7970-gpio"; 227 reg = <0x28>; 228 #gpio-cells = <2>; 229 gpio-controller; 230 ngpios = <62>; 231 }; 232 233 sgtl5000: codec@a { 234 compatible = "fsl,sgtl5000"; 235 pinctrl-names = "default"; 236 pinctrl-0 = <&pinctrl_sgtl5000>; 237 reg = <0x0a>; 238 clocks = <&clks IMX6QDL_CLK_CKO>; 239 VDDA-supply = <®_3p3v>; 240 VDDIO-supply = <®_3p3v>; 241 }; 242}; 243 244&i2c2 { 245 clock-frequency = <100000>; 246 pinctrl-names = "default", "gpio"; 247 pinctrl-0 = <&pinctrl_i2c2>; 248 pinctrl-1 = <&pinctrl_i2c2_gpio>; 249 scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; 250 sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; 251 status = "okay"; 252}; 253 254&iomuxc { 255 pinctrl-names = "default"; 256 pinctrl-0 = <&pinctrl_hog>; 257 258 pinctrl_ecspi1: ecspi1grp { 259 fsl,pins = < 260 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 261 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 262 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 263 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard Flash CS */ 264 >; 265 }; 266 267 pinctrl_ecspi2: ecspi2 { 268 fsl,pins = < 269 MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 270 MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 271 MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 272 MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x100b1 /* FPGA_SPI_CS0 */ 273 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x100b1 /* FPGA_SPI_CS1 */ 274 MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 /* HD1_SPI_CS */ 275 MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b088 /* FPGA_RESET */ 276 MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */ 277 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b088 /* FPGA_IRQ_0 */ 278 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b088 /* FPGA_IRQ_1 */ 279 >; 280 }; 281 282 pinctrl_enet: enet { 283 fsl,pins = < 284 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 285 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 286 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 287 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 288 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 289 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 290 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 291 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 292 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 293 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 294 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 295 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 296 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 297 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 298 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 299 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b088 300 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b088 /* ETH_PHY_RESET */ 301 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 302 >; 303 }; 304 305 pinctrl_flexcan1: flexcan1grp { 306 fsl,pins = < 307 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b088 308 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b088 309 MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b088 /* EN_CAN_1 */ 310 >; 311 }; 312 313 pinctrl_flexcan2: flexcan2grp { 314 fsl,pins = < 315 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b088 316 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b088 317 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b088 /* EN_CAN_2 */ 318 >; 319 }; 320 321 pinctrl_hog: hoggrp { 322 fsl,pins = < 323 /* Onboard */ 324 MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b088 /* USB_HUB_RESET */ 325 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b088 /* SEL_DC_USB */ 326 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b088 /* EN_USB_5V */ 327 MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b088 /* JTAG_FPGA_TMS */ 328 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b088 /* JTAG_FPGA_TCK */ 329 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b088 /* JTAG_FPGA_TDO */ 330 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b088 /* JTAG_FPGA_TDI */ 331 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b088 /* GYRO_INT */ 332 MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b088 /* MODBUS_FAULT */ 333 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b088 /* BUS_DIR/JP_SD_BOOT */ 334 MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b088 /* EN_MODBUS_24V */ 335 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b088 /* EN_MODBUS_3V */ 336 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b088 /* I210_RESET */ 337 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b088 /* EN_RTC_PWR */ 338 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b088 /* REVSTRAP1 */ 339 340 /* Offboard */ 341 MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b088 /* LCD_D09 */ 342 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b088 /* HD1_IRQ */ 343 MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b088 /* LCD_D10 */ 344 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b088 /* LCD_D11 */ 345 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b088 /* BUS_BHE */ 346 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b088 /* BUS_ALE */ 347 MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b088 /* BUS_CS */ 348 MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b088 /* DIO_20 */ 349 MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b088 /* BUS_WAIT */ 350 MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b088 /* MUX_AD_00 */ 351 MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b088 /* MUX_AD_01 */ 352 MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b088 /* MUX_AD_02 */ 353 MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b088 /* MUX_AD_03 */ 354 MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b088 /* MUX_AD_04 */ 355 MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b088 /* MUX_AD_05 */ 356 MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b088 /* MUX_AD_06 */ 357 MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b088 /* MUX_AD_07 */ 358 MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b088 /* MUX_AD_08 */ 359 MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b088 /* MUX_AD_09 */ 360 MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b088 /* MUX_AD_10 */ 361 MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b088 /* MUX_AD_11 */ 362 MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b088 /* MUX_AD_12 */ 363 MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b088 /* MUX_AD_13 */ 364 MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b088 /* MUX_AD_14 */ 365 MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b088 /* MUX_AD_15 */ 366 367 /* Strapping only */ 368 MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b088 369 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b088 370 >; 371 }; 372 373 pinctrl_i2c1: i2c1grp { 374 fsl,pins = < 375 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 376 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 377 >; 378 }; 379 380 pinctrl_i2c1_gpio: i2c1gpiogrp { 381 fsl,pins = < 382 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 383 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 384 >; 385 }; 386 387 pinctrl_i2c2: i2c2grp { 388 fsl,pins = < 389 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 390 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 391 >; 392 }; 393 394 pinctrl_i2c2_gpio: i2c2gpiogrp { 395 fsl,pins = < 396 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 397 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 398 >; 399 }; 400 401 pinctrl_leds1: leds1grp { 402 fsl,pins = < 403 MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b088 /* GREEN_LED */ 404 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b088 /* RED_LED */ 405 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b088 /* YEL_LED */ 406 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b088 /* IMX6_BLUE_LED */ 407 >; 408 }; 409 410 pinctrl_sgtl5000: sgtl5000grp { 411 fsl,pins = < 412 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 413 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 414 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 415 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 416 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */ 417 >; 418 }; 419 420 pinctrl_uart1: uart1grp { 421 fsl,pins = < 422 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b088 423 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b088 424 >; 425 }; 426 427 pinctrl_uart2: uart2grp { 428 fsl,pins = < 429 MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b088 430 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b088 431 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b088 432 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b088 433 >; 434 }; 435 436 pinctrl_uart3: uart3grp { 437 fsl,pins = < 438 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b088 439 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b088 440 MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b088 441 MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b088 442 >; 443 }; 444 445 pinctrl_uart4: uart4grp { 446 fsl,pins = < 447 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b088 448 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b088 449 >; 450 }; 451 452 pinctrl_uart5: uart5grp { 453 fsl,pins = < 454 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b088 455 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b088 456 >; 457 }; 458 459 pinctrl_usbotg: usbotggrp { 460 fsl,pins = < 461 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 462 >; 463 }; 464 465 pinctrl_usdhc1: usdhc1grp { 466 fsl,pins = < 467 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 468 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 469 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 470 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 471 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 472 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 473 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */ 474 >; 475 }; 476 477 pinctrl_usdhc2: usdhc2grp { 478 fsl,pins = < 479 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 480 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 481 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 482 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 483 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 484 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 485 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b088 /* EN_SD_POWER */ 486 >; 487 }; 488 489 pinctrl_usdhc3: usdhc3grp { 490 fsl,pins = < 491 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 492 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 493 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 494 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 495 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 496 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 497 >; 498 }; 499}; 500 501&pcie { 502 status = "okay"; 503}; 504 505&snvs_rtc { 506 status = "disabled"; 507}; 508 509&ssi1 { 510 status = "okay"; 511}; 512 513&uart1 { 514 pinctrl-names = "default"; 515 pinctrl-0 = <&pinctrl_uart1>; 516 status = "okay"; 517}; 518 519&uart2 { 520 pinctrl-names = "default"; 521 pinctrl-0 = <&pinctrl_uart2>; 522 uart-has-rtscts; 523 status = "okay"; 524}; 525 526&uart3 { 527 pinctrl-names = "default"; 528 pinctrl-0 = <&pinctrl_uart3>; 529 status = "okay"; 530}; 531 532&uart4 { 533 pinctrl-names = "default"; 534 pinctrl-0 = <&pinctrl_uart4>; 535 status = "okay"; 536}; 537 538&uart5 { 539 pinctrl-names = "default"; 540 pinctrl-0 = <&pinctrl_uart5>; 541 status = "okay"; 542}; 543 544&usbh1 { 545 status = "okay"; 546}; 547 548&usbotg { 549 vbus-supply = <®_usb_otg_vbus>; 550 pinctrl-names = "default"; 551 pinctrl-0 = <&pinctrl_usbotg>; 552 disable-over-current; 553 status = "okay"; 554}; 555 556/* WIFI */ 557&usdhc1 { 558 pinctrl-names = "default"; 559 pinctrl-0 = <&pinctrl_usdhc1>; 560 vmmc-supply = <®_wlan_vmmc>; 561 bus-width = <4>; 562 non-removable; 563 #address-cells = <1>; 564 #size-cells = <0>; 565 status = "okay"; 566 567 wlcore: wlcore@2 { 568 compatible = "ti,wl1271"; 569 reg = <2>; 570 interrupt-parent = <&gpio1>; 571 interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; 572 ref-clock-frequency = <38400000>; 573 }; 574}; 575 576/* SD */ 577&usdhc2 { 578 pinctrl-names = "default"; 579 pinctrl-0 = <&pinctrl_usdhc2>; 580 vmmc-supply = <®_3p3v>; 581 bus-width = <4>; 582 fsl,wp-controller; 583 status = "okay"; 584}; 585 586/* eMMC */ 587&usdhc3 { 588 pinctrl-names = "default"; 589 pinctrl-0 = <&pinctrl_usdhc3>; 590 vmmc-supply = <®_3p3v>; 591 bus-width = <4>; 592 non-removable; 593 status = "okay"; 594}; 595