1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7 8/ { 9 model = "Phytec phyFLEX-i.MX6 Quad"; 10 compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; 11 12 memory@10000000 { 13 device_type = "memory"; 14 reg = <0x10000000 0x80000000>; 15 }; 16 17 reg_usb_otg_vbus: regulator-usb-otg-vbus { 18 compatible = "regulator-fixed"; 19 regulator-name = "usb_otg_vbus"; 20 regulator-min-microvolt = <5000000>; 21 regulator-max-microvolt = <5000000>; 22 gpio = <&gpio4 15 0>; 23 enable-active-high; 24 }; 25 26 reg_usb_h1_vbus: regulator-usb-h1-vbus { 27 compatible = "regulator-fixed"; 28 pinctrl-names = "default"; 29 pinctrl-0 = <&pinctrl_usbh1_vbus>; 30 regulator-name = "usb_h1_vbus"; 31 regulator-min-microvolt = <5000000>; 32 regulator-max-microvolt = <5000000>; 33 gpio = <&gpio1 0 0>; 34 enable-active-high; 35 }; 36 37 gpio_leds: leds { 38 pinctrl-names = "default"; 39 pinctrl-0 = <&pinctrl_leds>; 40 compatible = "gpio-leds"; 41 42 led_green: led-green { 43 label = "phyflex:green"; 44 gpios = <&gpio1 30 0>; 45 }; 46 47 led_red: led-red { 48 label = "phyflex:red"; 49 gpios = <&gpio2 31 0>; 50 }; 51 }; 52}; 53 54&audmux { 55 pinctrl-names = "default"; 56 pinctrl-0 = <&pinctrl_audmux>; 57 status = "disabled"; 58}; 59 60&can1 { 61 pinctrl-names = "default"; 62 pinctrl-0 = <&pinctrl_flexcan1>; 63 status = "disabled"; 64}; 65 66&ecspi3 { 67 pinctrl-names = "default"; 68 pinctrl-0 = <&pinctrl_ecspi3>; 69 status = "okay"; 70 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 71 72 som_flash: flash@0 { 73 compatible = "m25p80", "jedec,spi-nor"; 74 spi-max-frequency = <20000000>; 75 reg = <0>; 76 }; 77}; 78 79&fec { 80 pinctrl-names = "default"; 81 pinctrl-0 = <&pinctrl_enet>; 82 phy-handle = <ðphy>; 83 phy-mode = "rgmii"; 84 phy-reset-duration = <10>; /* in msecs */ 85 phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 86 phy-supply = <&vdd_eth_io_reg>; 87 status = "disabled"; 88 89 fec_mdio: mdio { 90 #address-cells = <1>; 91 #size-cells = <0>; 92 93 ethphy: ethernet-phy@0 { 94 compatible = "ethernet-phy-ieee802.3-c22"; 95 reg = <0>; 96 txc-skew-ps = <1680>; 97 rxc-skew-ps = <1860>; 98 }; 99 }; 100}; 101 102&gpmi { 103 pinctrl-names = "default"; 104 pinctrl-0 = <&pinctrl_gpmi_nand>; 105 nand-on-flash-bbt; 106 status = "okay"; 107}; 108 109&i2c1 { 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_i2c1>; 112 status = "okay"; 113 114 som_eeprom: eeprom@50 { 115 compatible = "catalyst,24c32", "atmel,24c32"; 116 pagesize = <32>; 117 reg = <0x50>; 118 }; 119 120 pmic@58 { 121 pinctrl-names = "default"; 122 pinctrl-0 = <&pinctrl_pmic>; 123 compatible = "dlg,da9063"; 124 reg = <0x58>; 125 interrupt-parent = <&gpio2>; 126 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ 127 #interrupt-cells = <2>; 128 interrupt-controller; 129 130 regulators { 131 vddcore_reg: bcore1 { 132 regulator-min-microvolt = <730000>; 133 regulator-max-microvolt = <1380000>; 134 regulator-always-on; 135 }; 136 137 vddsoc_reg: bcore2 { 138 regulator-min-microvolt = <730000>; 139 regulator-max-microvolt = <1380000>; 140 regulator-always-on; 141 }; 142 143 vdd_ddr3_reg: bpro { 144 regulator-min-microvolt = <1500000>; 145 regulator-max-microvolt = <1500000>; 146 regulator-always-on; 147 }; 148 149 vdd_3v3_reg: bperi { 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 regulator-always-on; 153 }; 154 155 vdd_buckmem_reg: bmem { 156 regulator-min-microvolt = <3300000>; 157 regulator-max-microvolt = <3300000>; 158 regulator-always-on; 159 }; 160 161 vdd_eth_reg: bio { 162 regulator-min-microvolt = <1200000>; 163 regulator-max-microvolt = <1200000>; 164 regulator-always-on; 165 }; 166 167 vdd_eth_io_reg: ldo4 { 168 regulator-min-microvolt = <2500000>; 169 regulator-max-microvolt = <2500000>; 170 regulator-always-on; 171 }; 172 173 vdd_mx6_snvs_reg: ldo5 { 174 regulator-min-microvolt = <3000000>; 175 regulator-max-microvolt = <3000000>; 176 regulator-always-on; 177 }; 178 179 vdd_3v3_pmic_io_reg: ldo6 { 180 regulator-min-microvolt = <3300000>; 181 regulator-max-microvolt = <3300000>; 182 regulator-always-on; 183 }; 184 185 vdd_sd0_reg: ldo9 { 186 regulator-min-microvolt = <3300000>; 187 regulator-max-microvolt = <3300000>; 188 }; 189 190 vdd_sd1_reg: ldo10 { 191 regulator-min-microvolt = <3300000>; 192 regulator-max-microvolt = <3300000>; 193 }; 194 195 vdd_mx6_high_reg: ldo11 { 196 regulator-min-microvolt = <3000000>; 197 regulator-max-microvolt = <3000000>; 198 regulator-always-on; 199 }; 200 }; 201 202 da9063_rtc: rtc { 203 compatible = "dlg,da9063-rtc"; 204 }; 205 206 da9063_wdog: watchdog { 207 compatible = "dlg,da9063-watchdog"; 208 }; 209 210 onkey { 211 compatible = "dlg,da9063-onkey"; 212 status = "disabled"; 213 }; 214 }; 215}; 216 217&i2c2 { 218 pinctrl-names = "default"; 219 pinctrl-0 = <&pinctrl_i2c2>; 220 clock-frequency = <100000>; 221}; 222 223&i2c3 { 224 pinctrl-names = "default"; 225 pinctrl-0 = <&pinctrl_i2c3>; 226 clock-frequency = <100000>; 227}; 228 229&iomuxc { 230 pinctrl_ecspi3: ecspi3grp { 231 fsl,pins = < 232 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 233 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 234 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 235 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ 236 >; 237 }; 238 239 pinctrl_enet: enetgrp { 240 fsl,pins = < 241 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 242 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 243 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 244 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 245 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 246 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 247 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 248 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 249 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 250 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 251 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 252 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 253 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 254 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 255 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 256 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 257 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ 258 >; 259 }; 260 261 pinctrl_flexcan1: flexcan1grp { 262 fsl,pins = < 263 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 264 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 265 >; 266 }; 267 268 pinctrl_gpmi_nand: gpminandgrp { 269 fsl,pins = < 270 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 271 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 272 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 273 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 274 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 275 MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 276 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 277 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 278 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 279 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 280 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 281 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 282 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 283 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 284 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 285 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 286 MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 287 >; 288 }; 289 290 pinctrl_i2c1: i2c1grp { 291 fsl,pins = < 292 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 293 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 294 >; 295 }; 296 297 pinctrl_i2c2: i2c2grp { 298 fsl,pins = < 299 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 300 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 301 >; 302 }; 303 304 pinctrl_i2c3: i2c3grp { 305 fsl,pins = < 306 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 307 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 308 >; 309 }; 310 311 pinctrl_leds: ledsgrp { 312 fsl,pins = < 313 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ 314 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ 315 >; 316 }; 317 318 pinctrl_pcie: pciegrp { 319 fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; 320 }; 321 322 pinctrl_pmic: pmicgrp { 323 fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ 324 }; 325 326 pinctrl_uart3: uart3grp { 327 fsl,pins = < 328 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 329 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 330 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 331 MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 332 >; 333 }; 334 335 pinctrl_uart4: uart4grp { 336 fsl,pins = < 337 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 338 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 339 >; 340 }; 341 342 pinctrl_usbh1_vbus: usbh1vbusgrp { 343 fsl,pins = < 344 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 345 >; 346 }; 347 348 pinctrl_usbotg: usbotggrp { 349 fsl,pins = < 350 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 351 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 352 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 353 >; 354 }; 355 356 pinctrl_usdhc2: usdhc2grp { 357 fsl,pins = < 358 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 359 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 360 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 361 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 362 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 363 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 364 >; 365 }; 366 367 pinctrl_usdhc3: usdhc3grp { 368 fsl,pins = < 369 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 370 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 371 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 372 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 373 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 374 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 375 >; 376 }; 377 378 pinctrl_usdhc3_cdwp: usdhc3cdwpgrp { 379 fsl,pins = < 380 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 381 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 382 >; 383 }; 384 385 pinctrl_audmux: audmuxgrp { 386 fsl,pins = < 387 MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 388 MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 389 MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 390 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 391 >; 392 }; 393}; 394 395&pcie { 396 pinctrl-names = "default"; 397 pinctrl-0 = <&pinctrl_pcie>; 398 reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>; 399 status = "disabled"; 400}; 401 402®_arm { 403 vin-supply = <&vddcore_reg>; 404}; 405 406®_pu { 407 vin-supply = <&vddsoc_reg>; 408}; 409 410®_soc { 411 vin-supply = <&vddsoc_reg>; 412}; 413 414&uart3 { 415 pinctrl-names = "default"; 416 pinctrl-0 = <&pinctrl_uart3>; 417 uart-has-rtscts; 418 status = "disabled"; 419}; 420 421&uart4 { 422 pinctrl-names = "default"; 423 pinctrl-0 = <&pinctrl_uart4>; 424 status = "disabled"; 425}; 426 427&usbh1 { 428 vbus-supply = <®_usb_h1_vbus>; 429 status = "disabled"; 430}; 431 432&usbotg { 433 vbus-supply = <®_usb_otg_vbus>; 434 pinctrl-names = "default"; 435 pinctrl-0 = <&pinctrl_usbotg>; 436 disable-over-current; 437 status = "disabled"; 438}; 439 440&usdhc2 { 441 pinctrl-names = "default"; 442 pinctrl-0 = <&pinctrl_usdhc2>; 443 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 444 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; 445 vmmc-supply = <&vdd_sd1_reg>; 446 status = "disabled"; 447}; 448 449&usdhc3 { 450 pinctrl-names = "default"; 451 pinctrl-0 = <&pinctrl_usdhc3 452 &pinctrl_usdhc3_cdwp>; 453 cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; 454 wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; 455 vmmc-supply = <&vdd_sd0_reg>; 456 status = "disabled"; 457}; 458 459&wdog1 { 460 /* 461 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also 462 * used for reboot, does not reset all external PMIC voltages on reset. 463 */ 464 status = "disabled"; 465}; 466