xref: /linux/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2019 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11	/* these are used by bootloader for disabling nodes */
12	aliases {
13		led0 = &led0;
14		led1 = &led1;
15		nand = &gpmi;
16		usb0 = &usbh1;
17		usb1 = &usbotg;
18	};
19
20	chosen {
21		stdout-path = &uart2;
22	};
23
24	gpio-keys {
25		compatible = "gpio-keys";
26
27		user-pb {
28			label = "user_pb";
29			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
30			linux,code = <BTN_0>;
31		};
32
33		user-pb1x {
34			label = "user_pb1x";
35			linux,code = <BTN_1>;
36			interrupt-parent = <&gsc>;
37			interrupts = <0>;
38		};
39
40		key-erased {
41			label = "key-erased";
42			linux,code = <BTN_2>;
43			interrupt-parent = <&gsc>;
44			interrupts = <1>;
45		};
46
47		eeprom-wp {
48			label = "eeprom_wp";
49			linux,code = <BTN_3>;
50			interrupt-parent = <&gsc>;
51			interrupts = <2>;
52		};
53
54		tamper {
55			label = "tamper";
56			linux,code = <BTN_4>;
57			interrupt-parent = <&gsc>;
58			interrupts = <5>;
59		};
60
61		switch-hold {
62			label = "switch_hold";
63			linux,code = <BTN_5>;
64			interrupt-parent = <&gsc>;
65			interrupts = <7>;
66		};
67	};
68
69	leds {
70		compatible = "gpio-leds";
71		pinctrl-names = "default";
72		pinctrl-0 = <&pinctrl_gpio_leds>;
73
74		led0: led-user1 {
75			label = "user1";
76			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
77			default-state = "on";
78			linux,default-trigger = "heartbeat";
79		};
80
81		led1: led-user2 {
82			label = "user2";
83			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
84			default-state = "off";
85		};
86	};
87
88	memory@10000000 {
89		device_type = "memory";
90		reg = <0x10000000 0x20000000>;
91	};
92
93	pps {
94		compatible = "pps-gpio";
95		pinctrl-names = "default";
96		pinctrl-0 = <&pinctrl_pps>;
97		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
98		status = "okay";
99	};
100
101	reg_3p3v: regulator-3p3v {
102		compatible = "regulator-fixed";
103		regulator-name = "3P3V";
104		regulator-min-microvolt = <3300000>;
105		regulator-max-microvolt = <3300000>;
106		regulator-always-on;
107	};
108
109	reg_5p0v: regulator-5p0v {
110		compatible = "regulator-fixed";
111		regulator-name = "5P0V";
112		regulator-min-microvolt = <5000000>;
113		regulator-max-microvolt = <5000000>;
114		regulator-always-on;
115	};
116};
117
118&fec {
119	pinctrl-names = "default";
120	pinctrl-0 = <&pinctrl_enet>;
121	phy-mode = "rgmii-id";
122	status = "okay";
123};
124
125&gpmi {
126	pinctrl-names = "default";
127	pinctrl-0 = <&pinctrl_gpmi_nand>;
128	status = "okay";
129};
130
131&i2c1 {
132	clock-frequency = <100000>;
133	pinctrl-names = "default";
134	pinctrl-0 = <&pinctrl_i2c1>;
135	status = "okay";
136
137	gsc: gsc@20 {
138		compatible = "gw,gsc";
139		reg = <0x20>;
140		interrupt-parent = <&gpio1>;
141		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
142		interrupt-controller;
143		#interrupt-cells = <1>;
144		#size-cells = <0>;
145
146		adc {
147			compatible = "gw,gsc-adc";
148			#address-cells = <1>;
149			#size-cells = <0>;
150
151			channel@6 {
152				gw,mode = <0>;
153				reg = <0x06>;
154				label = "temp";
155			};
156
157			channel@8 {
158				gw,mode = <3>;
159				reg = <0x08>;
160				label = "vdd_bat";
161			};
162
163			channel@82 {
164				gw,mode = <2>;
165				reg = <0x82>;
166				label = "vdd_vin";
167				gw,voltage-divider-ohms = <22100 1000>;
168				gw,voltage-offset-microvolt = <800000>;
169			};
170
171			channel@84 {
172				gw,mode = <2>;
173				reg = <0x84>;
174				label = "vdd_5p0";
175				gw,voltage-divider-ohms = <22100 10000>;
176			};
177
178			channel@86 {
179				gw,mode = <2>;
180				reg = <0x86>;
181				label = "vdd_3p3";
182				gw,voltage-divider-ohms = <10000 10000>;
183			};
184
185			channel@88 {
186				gw,mode = <2>;
187				reg = <0x88>;
188				label = "vdd_2p5";
189				gw,voltage-divider-ohms = <10000 10000>;
190			};
191
192			channel@8c {
193				gw,mode = <2>;
194				reg = <0x8c>;
195				label = "vdd_arm";
196			};
197
198			channel@8e {
199				gw,mode = <2>;
200				reg = <0x8e>;
201				label = "vdd_soc";
202			};
203
204			channel@90 {
205				gw,mode = <2>;
206				reg = <0x90>;
207				label = "vdd_1p5";
208			};
209
210			channel@92 {
211				gw,mode = <2>;
212				reg = <0x92>;
213				label = "vdd_1p0";
214			};
215
216			channel@98 {
217				gw,mode = <2>;
218				reg = <0x98>;
219				label = "vdd_3p0";
220			};
221
222			channel@9a {
223				gw,mode = <2>;
224				reg = <0x9a>;
225				label = "vdd_an1";
226				gw,voltage-divider-ohms = <10000 10000>;
227			};
228
229			channel@a2 {
230				gw,mode = <2>;
231				reg = <0xa2>;
232				label = "vdd_gsc";
233				gw,voltage-divider-ohms = <10000 10000>;
234			};
235		};
236	};
237
238	gsc_gpio: gpio@23 {
239		compatible = "nxp,pca9555";
240		reg = <0x23>;
241		gpio-controller;
242		#gpio-cells = <2>;
243		interrupt-parent = <&gsc>;
244		interrupts = <4>;
245	};
246
247	eeprom@50 {
248		compatible = "atmel,24c02";
249		reg = <0x50>;
250		pagesize = <16>;
251	};
252
253	eeprom@51 {
254		compatible = "atmel,24c02";
255		reg = <0x51>;
256		pagesize = <16>;
257	};
258
259	eeprom@52 {
260		compatible = "atmel,24c02";
261		reg = <0x52>;
262		pagesize = <16>;
263	};
264
265	eeprom@53 {
266		compatible = "atmel,24c02";
267		reg = <0x53>;
268		pagesize = <16>;
269	};
270
271	rtc@68 {
272		compatible = "dallas,ds1672";
273		reg = <0x68>;
274	};
275};
276
277&i2c2 {
278	clock-frequency = <100000>;
279	pinctrl-names = "default";
280	pinctrl-0 = <&pinctrl_i2c2>;
281	status = "okay";
282};
283
284&i2c3 {
285	clock-frequency = <100000>;
286	pinctrl-names = "default";
287	pinctrl-0 = <&pinctrl_i2c3>;
288	status = "okay";
289};
290
291&pcie {
292	pinctrl-names = "default";
293	pinctrl-0 = <&pinctrl_pcie>;
294	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
295	status = "okay";
296};
297
298&pwm2 {
299	pinctrl-names = "default";
300	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
301	status = "disabled";
302};
303
304&pwm3 {
305	pinctrl-names = "default";
306	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
307	status = "disabled";
308};
309
310&pwm4 {
311	pinctrl-names = "default";
312	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
313	status = "disabled";
314};
315
316&uart1 {
317	pinctrl-names = "default";
318	pinctrl-0 = <&pinctrl_uart1>;
319	status = "okay";
320};
321
322&uart2 {
323	pinctrl-names = "default";
324	pinctrl-0 = <&pinctrl_uart2>;
325	status = "okay";
326};
327
328&uart3 {
329	pinctrl-names = "default";
330	pinctrl-0 = <&pinctrl_uart3>;
331	status = "okay";
332};
333
334&uart5 {
335	pinctrl-names = "default";
336	pinctrl-0 = <&pinctrl_uart5>;
337	status = "okay";
338};
339
340&usbotg {
341	pinctrl-names = "default";
342	pinctrl-0 = <&pinctrl_usbotg>;
343	disable-over-current;
344	status = "okay";
345};
346
347&usbh1 {
348	status = "okay";
349};
350
351&wdog1 {
352	pinctrl-names = "default";
353	pinctrl-0 = <&pinctrl_wdog>;
354	fsl,ext-reset-output;
355};
356
357&iomuxc {
358	pinctrl_enet: enetgrp {
359		fsl,pins = <
360			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
361			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
362			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
363			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
364			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
365			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
366			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
367			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
368			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
369			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
370			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
371			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
372			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
373			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
374			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
375			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
376			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
377		>;
378	};
379
380	pinctrl_gpio_leds: gpioledsgrp {
381		fsl,pins = <
382			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
383			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
384		>;
385	};
386
387	pinctrl_gpmi_nand: gpminandgrp {
388		fsl,pins = <
389			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
390			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
391			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
392			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
393			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
394			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
395			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
396			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
397			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
398			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
399			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
400			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
401			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
402			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
403			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
404		>;
405	};
406
407	pinctrl_i2c1: i2c1grp {
408		fsl,pins = <
409			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
410			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
411			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
412		>;
413	};
414
415	pinctrl_i2c2: i2c2grp {
416		fsl,pins = <
417			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
418			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
419		>;
420	};
421
422	pinctrl_i2c3: i2c3grp {
423		fsl,pins = <
424			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
425			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
426		>;
427	};
428
429	pinctrl_pcie: pciegrp {
430		fsl,pins = <
431			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
432		>;
433	};
434
435	pinctrl_pps: ppsgrp {
436		fsl,pins = <
437			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
438		>;
439	};
440
441	pinctrl_pwm2: pwm2grp {
442		fsl,pins = <
443			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
444		>;
445	};
446
447	pinctrl_pwm3: pwm3grp {
448		fsl,pins = <
449			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
450		>;
451	};
452
453	pinctrl_pwm4: pwm4grp {
454		fsl,pins = <
455			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
456		>;
457	};
458
459	pinctrl_uart1: uart1grp {
460		fsl,pins = <
461			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
462			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
463		>;
464	};
465
466	pinctrl_uart2: uart2grp {
467		fsl,pins = <
468			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
469			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
470		>;
471	};
472
473	pinctrl_uart3: uart3grp {
474		fsl,pins = <
475			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
476			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
477		>;
478	};
479
480	pinctrl_uart5: uart5grp {
481		fsl,pins = <
482			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
483			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
484		>;
485	};
486
487	pinctrl_usbotg: usbotggrp {
488		fsl,pins = <
489			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
490		>;
491	};
492
493	pinctrl_wdog: wdoggrp {
494		fsl,pins = <
495			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
496		>;
497	};
498};
499