1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright 2019 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 /* these are used by bootloader for disabling nodes */ 12 aliases { 13 led0 = &led0; 14 led1 = &led1; 15 led2 = &led2; 16 }; 17 18 chosen { 19 stdout-path = &uart2; 20 }; 21 22 memory@10000000 { 23 device_type = "memory"; 24 reg = <0x10000000 0x20000000>; 25 }; 26 27 gpio-keys { 28 compatible = "gpio-keys"; 29 30 user-pb { 31 label = "user_pb"; 32 gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; 33 linux,code = <BTN_0>; 34 }; 35 36 user-pb1x { 37 label = "user_pb1x"; 38 linux,code = <BTN_1>; 39 interrupt-parent = <&gsc>; 40 interrupts = <0>; 41 }; 42 43 key-erased { 44 label = "key-erased"; 45 linux,code = <BTN_2>; 46 interrupt-parent = <&gsc>; 47 interrupts = <1>; 48 }; 49 50 eeprom-wp { 51 label = "eeprom_wp"; 52 linux,code = <BTN_3>; 53 interrupt-parent = <&gsc>; 54 interrupts = <2>; 55 }; 56 57 tamper { 58 label = "tamper"; 59 linux,code = <BTN_4>; 60 interrupt-parent = <&gsc>; 61 interrupts = <5>; 62 }; 63 64 switch-hold { 65 label = "switch_hold"; 66 linux,code = <BTN_5>; 67 interrupt-parent = <&gsc>; 68 interrupts = <7>; 69 }; 70 }; 71 72 leds { 73 compatible = "gpio-leds"; 74 pinctrl-names = "default"; 75 pinctrl-0 = <&pinctrl_gpio_leds>; 76 77 led0: led-user1 { 78 label = "user1"; 79 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 80 default-state = "on"; 81 linux,default-trigger = "heartbeat"; 82 }; 83 84 led1: led-user2 { 85 label = "user2"; 86 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 87 default-state = "off"; 88 }; 89 90 led2: led-user3 { 91 label = "user3"; 92 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 93 default-state = "off"; 94 }; 95 }; 96 97 pps { 98 compatible = "pps-gpio"; 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_pps>; 101 gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; 102 status = "okay"; 103 }; 104 105 reg_3p3v: regulator-3p3v { 106 compatible = "regulator-fixed"; 107 regulator-name = "3P3V"; 108 regulator-min-microvolt = <3300000>; 109 regulator-max-microvolt = <3300000>; 110 regulator-always-on; 111 }; 112 113 reg_5p0v: regulator-5p0v { 114 compatible = "regulator-fixed"; 115 regulator-name = "5P0V"; 116 regulator-min-microvolt = <5000000>; 117 regulator-max-microvolt = <5000000>; 118 regulator-always-on; 119 }; 120 121 reg_wl: regulator-wl { 122 pinctrl-names = "default"; 123 pinctrl-0 = <&pinctrl_reg_wl>; 124 compatible = "regulator-fixed"; 125 regulator-name = "wl"; 126 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; 127 startup-delay-us = <100>; 128 enable-active-high; 129 regulator-min-microvolt = <3300000>; 130 regulator-max-microvolt = <3300000>; 131 }; 132}; 133 134 135&ecspi3 { 136 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_ecspi3>; 139 status = "okay"; 140}; 141 142&fec { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&pinctrl_enet>; 145 phy-mode = "rgmii-id"; 146 status = "okay"; 147}; 148 149&gpmi { 150 pinctrl-names = "default"; 151 pinctrl-0 = <&pinctrl_gpmi_nand>; 152 status = "okay"; 153}; 154 155&i2c1 { 156 clock-frequency = <100000>; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_i2c1>; 159 status = "okay"; 160 161 gsc: gsc@20 { 162 compatible = "gw,gsc"; 163 reg = <0x20>; 164 interrupt-parent = <&gpio1>; 165 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 166 interrupt-controller; 167 #interrupt-cells = <1>; 168 #size-cells = <0>; 169 170 adc { 171 compatible = "gw,gsc-adc"; 172 #address-cells = <1>; 173 #size-cells = <0>; 174 175 channel@6 { 176 gw,mode = <0>; 177 reg = <0x06>; 178 label = "temp"; 179 }; 180 181 channel@8 { 182 gw,mode = <3>; 183 reg = <0x08>; 184 label = "vdd_bat"; 185 }; 186 187 channel@82 { 188 gw,mode = <2>; 189 reg = <0x82>; 190 label = "vdd_vin"; 191 gw,voltage-divider-ohms = <22100 1000>; 192 gw,voltage-offset-microvolt = <800000>; 193 }; 194 195 channel@84 { 196 gw,mode = <2>; 197 reg = <0x84>; 198 label = "vdd_5p0"; 199 gw,voltage-divider-ohms = <22100 10000>; 200 }; 201 202 channel@86 { 203 gw,mode = <2>; 204 reg = <0x86>; 205 label = "vdd_3p3"; 206 gw,voltage-divider-ohms = <10000 10000>; 207 }; 208 209 channel@88 { 210 gw,mode = <2>; 211 reg = <0x88>; 212 label = "vdd_2p5"; 213 gw,voltage-divider-ohms = <10000 10000>; 214 }; 215 216 channel@8c { 217 gw,mode = <2>; 218 reg = <0x8c>; 219 label = "vdd_3p0"; 220 }; 221 222 channel@8e { 223 gw,mode = <2>; 224 reg = <0x8e>; 225 label = "vdd_arm"; 226 }; 227 228 channel@90 { 229 gw,mode = <2>; 230 reg = <0x90>; 231 label = "vdd_soc"; 232 }; 233 234 channel@92 { 235 gw,mode = <2>; 236 reg = <0x92>; 237 label = "vdd_1p5"; 238 }; 239 240 channel@98 { 241 gw,mode = <2>; 242 reg = <0x98>; 243 label = "vdd_1p8"; 244 }; 245 246 channel@9a { 247 gw,mode = <2>; 248 reg = <0x9a>; 249 label = "vdd_1p0"; 250 gw,voltage-divider-ohms = <10000 10000>; 251 }; 252 253 channel@9c { 254 gw,mode = <2>; 255 reg = <0x9c>; 256 label = "vdd_an1"; 257 gw,voltage-divider-ohms = <10000 10000>; 258 }; 259 260 channel@a2 { 261 gw,mode = <2>; 262 reg = <0xa2>; 263 label = "vdd_gsc"; 264 gw,voltage-divider-ohms = <10000 10000>; 265 }; 266 }; 267 }; 268 269 gsc_gpio: gpio@23 { 270 compatible = "nxp,pca9555"; 271 reg = <0x23>; 272 gpio-controller; 273 #gpio-cells = <2>; 274 interrupt-parent = <&gsc>; 275 interrupts = <4>; 276 }; 277 278 eeprom@50 { 279 compatible = "atmel,24c02"; 280 reg = <0x50>; 281 pagesize = <16>; 282 }; 283 284 eeprom@51 { 285 compatible = "atmel,24c02"; 286 reg = <0x51>; 287 pagesize = <16>; 288 }; 289 290 eeprom@52 { 291 compatible = "atmel,24c02"; 292 reg = <0x52>; 293 pagesize = <16>; 294 }; 295 296 eeprom@53 { 297 compatible = "atmel,24c02"; 298 reg = <0x53>; 299 pagesize = <16>; 300 }; 301 302 rtc@68 { 303 compatible = "dallas,ds1672"; 304 reg = <0x68>; 305 }; 306}; 307 308&i2c2 { 309 clock-frequency = <100000>; 310 pinctrl-names = "default"; 311 pinctrl-0 = <&pinctrl_i2c2>; 312 status = "okay"; 313}; 314 315&i2c3 { 316 clock-frequency = <100000>; 317 pinctrl-names = "default"; 318 pinctrl-0 = <&pinctrl_i2c3>; 319 status = "okay"; 320 321 accel@19 { 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_accel>; 324 compatible = "st,lis2de12"; 325 reg = <0x19>; 326 st,drdy-int-pin = <1>; 327 interrupt-parent = <&gpio7>; 328 interrupts = <13 0>; 329 }; 330}; 331 332&pcie { 333 pinctrl-names = "default"; 334 pinctrl-0 = <&pinctrl_pcie>; 335 reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; 336 status = "okay"; 337}; 338 339&pwm2 { 340 pinctrl-names = "default"; 341 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 342 status = "disabled"; 343}; 344 345&pwm3 { 346 pinctrl-names = "default"; 347 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 348 status = "disabled"; 349}; 350 351/* off-board RS232 */ 352&uart1 { 353 pinctrl-names = "default"; 354 pinctrl-0 = <&pinctrl_uart1>; 355 status = "okay"; 356}; 357 358/* serial console */ 359&uart2 { 360 pinctrl-names = "default"; 361 pinctrl-0 = <&pinctrl_uart2>; 362 status = "okay"; 363}; 364 365/* cc1352 */ 366&uart3 { 367 pinctrl-names = "default"; 368 pinctrl-0 = <&pinctrl_uart3>; 369 uart-has-rtscts; 370 status = "okay"; 371}; 372 373/* Sterling-LWB Bluetooth */ 374&uart4 { 375 pinctrl-names = "default"; 376 pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; 377 uart-has-rtscts; 378 status = "okay"; 379 380 bluetooth { 381 compatible = "brcm,bcm4330-bt"; 382 shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; 383 }; 384}; 385 386/* GPS */ 387&uart5 { 388 pinctrl-names = "default"; 389 pinctrl-0 = <&pinctrl_uart5>; 390 status = "okay"; 391}; 392 393&usbotg { 394 vbus-supply = <®_5p0v>; 395 pinctrl-names = "default"; 396 pinctrl-0 = <&pinctrl_usbotg>; 397 disable-over-current; 398 status = "okay"; 399}; 400 401&usbh1 { 402 status = "okay"; 403}; 404 405/* Sterling-LWB SDIO WiFi */ 406&usdhc2 { 407 pinctrl-names = "default"; 408 pinctrl-0 = <&pinctrl_usdhc2>; 409 vmmc-supply = <®_wl>; 410 non-removable; 411 bus-width = <4>; 412 status = "okay"; 413}; 414 415&usdhc3 { 416 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 417 pinctrl-0 = <&pinctrl_usdhc3>; 418 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 419 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 420 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 421 vmmc-supply = <®_3p3v>; 422 status = "okay"; 423}; 424 425&wdog1 { 426 pinctrl-names = "default"; 427 pinctrl-0 = <&pinctrl_wdog>; 428 fsl,ext-reset-output; 429}; 430 431&iomuxc { 432 pinctrl_accel: accelmuxgrp { 433 fsl,pins = < 434 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 435 >; 436 }; 437 438 pinctrl_bten: btengrp { 439 fsl,pins = < 440 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 441 >; 442 }; 443 444 pinctrl_ecspi3: escpi3grp { 445 fsl,pins = < 446 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 447 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 448 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 449 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 450 >; 451 }; 452 453 pinctrl_enet: enetgrp { 454 fsl,pins = < 455 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 456 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 457 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 458 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 459 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 460 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 461 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 462 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 463 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 464 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 465 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 466 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 467 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 468 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 469 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 470 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 471 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 472 >; 473 }; 474 475 pinctrl_gpio_leds: gpioledsgrp { 476 fsl,pins = < 477 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 478 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 479 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 480 >; 481 }; 482 483 pinctrl_gpmi_nand: gpminandgrp { 484 fsl,pins = < 485 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 486 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 487 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 488 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 489 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 490 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 491 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 492 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 493 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 494 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 495 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 496 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 497 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 498 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 499 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 500 >; 501 }; 502 503 pinctrl_i2c1: i2c1grp { 504 fsl,pins = < 505 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 506 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 507 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 508 >; 509 }; 510 511 pinctrl_i2c2: i2c2grp { 512 fsl,pins = < 513 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 514 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 515 >; 516 }; 517 518 pinctrl_i2c3: i2c3grp { 519 fsl,pins = < 520 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 521 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 522 >; 523 }; 524 525 pinctrl_pcie: pciegrp { 526 fsl,pins = < 527 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 528 >; 529 }; 530 531 pinctrl_pps: ppsgrp { 532 fsl,pins = < 533 MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 534 >; 535 }; 536 537 pinctrl_pwm2: pwm2grp { 538 fsl,pins = < 539 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 540 >; 541 }; 542 543 pinctrl_pwm3: pwm3grp { 544 fsl,pins = < 545 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 546 >; 547 }; 548 549 pinctrl_reg_wl: regwlgrp { 550 fsl,pins = < 551 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 552 >; 553 }; 554 555 pinctrl_uart1: uart1grp { 556 fsl,pins = < 557 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 558 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 559 >; 560 }; 561 562 pinctrl_uart2: uart2grp { 563 fsl,pins = < 564 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 565 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 566 >; 567 }; 568 569 pinctrl_uart3: uart3grp { 570 fsl,pins = < 571 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 572 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 573 MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 574 MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 575 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ 576 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ 577 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ 578 MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ 579 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ 580 MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ 581 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ 582 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ 583 >; 584 }; 585 586 pinctrl_uart4: uart4grp { 587 fsl,pins = < 588 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 589 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 590 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 591 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 592 >; 593 }; 594 595 pinctrl_uart5: uart5grp { 596 fsl,pins = < 597 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 598 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 599 >; 600 }; 601 602 pinctrl_usbotg: usbotggrp { 603 fsl,pins = < 604 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 605 >; 606 }; 607 608 pinctrl_usdhc2: usdhc2grp { 609 fsl,pins = < 610 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 611 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 612 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 613 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 614 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 615 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 616 >; 617 }; 618 619 pinctrl_usdhc3: usdhc3grp { 620 fsl,pins = < 621 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 622 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 623 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 624 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 625 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 626 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 627 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 628 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 629 >; 630 }; 631 632 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { 633 fsl,pins = < 634 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 635 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 636 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 637 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 638 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 639 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 640 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 641 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 642 >; 643 }; 644 645 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { 646 fsl,pins = < 647 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 648 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 649 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 650 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 651 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 652 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 653 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 654 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 655 >; 656 }; 657 658 pinctrl_wdog: wdoggrp { 659 fsl,pins = < 660 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 661 >; 662 }; 663}; 664