1/* 2 * Copyright 2017 Gateworks Corporation 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include <dt-bindings/gpio/gpio.h> 49#include <dt-bindings/input/linux-event-codes.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51 52/ { 53 /* these are used by bootloader for disabling nodes */ 54 aliases { 55 ethernet0 = &fec; 56 ethernet1 = &lan1; 57 ethernet2 = &lan2; 58 ethernet3 = &lan3; 59 ethernet4 = &lan4; 60 led0 = &led0; 61 led1 = &led1; 62 led2 = &led2; 63 usb0 = &usbh1; 64 usb1 = &usbotg; 65 }; 66 67 chosen { 68 stdout-path = &uart2; 69 }; 70 71 backlight { 72 compatible = "pwm-backlight"; 73 pwms = <&pwm4 0 5000000 0>; 74 brightness-levels = <0 4 8 16 32 64 128 255>; 75 default-brightness-level = <7>; 76 }; 77 78 gpio-keys { 79 compatible = "gpio-keys"; 80 81 user-pb { 82 label = "user_pb"; 83 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 84 linux,code = <BTN_0>; 85 }; 86 87 user-pb1x { 88 label = "user_pb1x"; 89 linux,code = <BTN_1>; 90 interrupt-parent = <&gsc>; 91 interrupts = <0>; 92 }; 93 94 key-erased { 95 label = "key-erased"; 96 linux,code = <BTN_2>; 97 interrupt-parent = <&gsc>; 98 interrupts = <1>; 99 }; 100 101 eeprom-wp { 102 label = "eeprom_wp"; 103 linux,code = <BTN_3>; 104 interrupt-parent = <&gsc>; 105 interrupts = <2>; 106 }; 107 108 tamper { 109 label = "tamper"; 110 linux,code = <BTN_4>; 111 interrupt-parent = <&gsc>; 112 interrupts = <5>; 113 }; 114 115 switch-hold { 116 label = "switch_hold"; 117 linux,code = <BTN_5>; 118 interrupt-parent = <&gsc>; 119 interrupts = <7>; 120 }; 121 }; 122 123 leds { 124 compatible = "gpio-leds"; 125 pinctrl-names = "default"; 126 pinctrl-0 = <&pinctrl_gpio_leds>; 127 128 led0: led-user1 { 129 label = "user1"; 130 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 131 default-state = "on"; 132 linux,default-trigger = "heartbeat"; 133 }; 134 135 led1: led-user2 { 136 label = "user2"; 137 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 138 default-state = "off"; 139 }; 140 141 led2: led-user3 { 142 label = "user3"; 143 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 144 default-state = "off"; 145 }; 146 }; 147 148 memory@10000000 { 149 device_type = "memory"; 150 reg = <0x10000000 0x40000000>; 151 }; 152 153 pps { 154 compatible = "pps-gpio"; 155 pinctrl-names = "default"; 156 pinctrl-0 = <&pinctrl_pps>; 157 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 158 }; 159 160 reg_1p0v: regulator-1p0v { 161 compatible = "regulator-fixed"; 162 regulator-name = "1P0V"; 163 regulator-min-microvolt = <1000000>; 164 regulator-max-microvolt = <1000000>; 165 regulator-always-on; 166 }; 167 168 reg_3p3v: regulator-3p3v { 169 compatible = "regulator-fixed"; 170 regulator-name = "3P3V"; 171 regulator-min-microvolt = <3300000>; 172 regulator-max-microvolt = <3300000>; 173 regulator-always-on; 174 }; 175 176 reg_usb_h1_vbus: regulator-usb-h1-vbus { 177 compatible = "regulator-fixed"; 178 regulator-name = "usb_h1_vbus"; 179 regulator-min-microvolt = <5000000>; 180 regulator-max-microvolt = <5000000>; 181 regulator-always-on; 182 }; 183 184 reg_usb_otg_vbus: regulator-usb-otg-vbus { 185 compatible = "regulator-fixed"; 186 regulator-name = "usb_otg_vbus"; 187 regulator-min-microvolt = <5000000>; 188 regulator-max-microvolt = <5000000>; 189 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 190 enable-active-high; 191 }; 192}; 193 194&clks { 195 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 196 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 197 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 198 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 199}; 200 201&fec { 202 pinctrl-names = "default"; 203 pinctrl-0 = <&pinctrl_enet>; 204 phy-mode = "rgmii-id"; 205 status = "okay"; 206 207 fixed-link { 208 speed = <1000>; 209 full-duplex; 210 }; 211 212 mdio { 213 #address-cells = <1>; 214 #size-cells = <0>; 215 216 switch@0 { 217 compatible = "marvell,mv88e6085"; 218 reg = <0>; 219 220 mdio { 221 #address-cells = <1>; 222 #size-cells = <0>; 223 224 sw_phy0: ethernet-phy@0 { 225 reg = <0x0>; 226 }; 227 228 sw_phy1: ethernet-phy@1 { 229 reg = <0x1>; 230 }; 231 232 sw_phy2: ethernet-phy@2 { 233 reg = <0x2>; 234 }; 235 236 sw_phy3: ethernet-phy@3 { 237 reg = <0x3>; 238 }; 239 }; 240 241 ports { 242 #address-cells = <1>; 243 #size-cells = <0>; 244 245 lan4: port@0 { 246 reg = <0>; 247 label = "lan4"; 248 phy-handle = <&sw_phy0>; 249 phy-mode = "internal"; 250 local-mac-address = [00 00 00 00 00 00]; 251 }; 252 253 lan3: port@1 { 254 reg = <1>; 255 label = "lan3"; 256 phy-handle = <&sw_phy1>; 257 phy-mode = "internal"; 258 local-mac-address = [00 00 00 00 00 00]; 259 }; 260 261 lan2: port@2 { 262 reg = <2>; 263 label = "lan2"; 264 phy-handle = <&sw_phy2>; 265 phy-mode = "internal"; 266 local-mac-address = [00 00 00 00 00 00]; 267 }; 268 269 lan1: port@3 { 270 reg = <3>; 271 label = "lan1"; 272 phy-handle = <&sw_phy3>; 273 phy-mode = "internal"; 274 local-mac-address = [00 00 00 00 00 00]; 275 }; 276 277 port@5 { 278 reg = <5>; 279 ethernet = <&fec>; 280 phy-mode = "rgmii-id"; 281 282 fixed-link { 283 speed = <1000>; 284 full-duplex; 285 }; 286 }; 287 }; 288 }; 289 }; 290}; 291 292&i2c1 { 293 clock-frequency = <100000>; 294 pinctrl-names = "default"; 295 pinctrl-0 = <&pinctrl_i2c1>; 296 status = "okay"; 297 298 gsc: gsc@20 { 299 compatible = "gw,gsc"; 300 reg = <0x20>; 301 interrupt-parent = <&gpio1>; 302 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 303 interrupt-controller; 304 #interrupt-cells = <1>; 305 #size-cells = <0>; 306 307 adc { 308 compatible = "gw,gsc-adc"; 309 #address-cells = <1>; 310 #size-cells = <0>; 311 312 channel@0 { 313 gw,mode = <0>; 314 reg = <0x00>; 315 label = "temp"; 316 }; 317 318 channel@2 { 319 gw,mode = <1>; 320 reg = <0x02>; 321 label = "vdd_vin"; 322 }; 323 324 channel@5 { 325 gw,mode = <1>; 326 reg = <0x05>; 327 label = "vdd_3p3"; 328 }; 329 330 channel@8 { 331 gw,mode = <1>; 332 reg = <0x08>; 333 label = "vdd_bat"; 334 }; 335 336 channel@b { 337 gw,mode = <1>; 338 reg = <0x0b>; 339 label = "vdd_5p0"; 340 }; 341 342 channel@e { 343 gw,mode = <1>; 344 reg = <0xe>; 345 label = "vdd_arm"; 346 }; 347 348 channel@11 { 349 gw,mode = <1>; 350 reg = <0x11>; 351 label = "vdd_soc"; 352 }; 353 354 channel@14 { 355 gw,mode = <1>; 356 reg = <0x14>; 357 label = "vdd_3p0"; 358 }; 359 360 channel@17 { 361 gw,mode = <1>; 362 reg = <0x17>; 363 label = "vdd_1p5"; 364 }; 365 366 channel@1d { 367 gw,mode = <1>; 368 reg = <0x1d>; 369 label = "vdd_1p8"; 370 }; 371 372 channel@20 { 373 gw,mode = <1>; 374 reg = <0x20>; 375 label = "vdd_an1"; 376 }; 377 378 channel@23 { 379 gw,mode = <1>; 380 reg = <0x23>; 381 label = "vdd_2p5"; 382 }; 383 }; 384 }; 385 386 gsc_gpio: gpio@23 { 387 compatible = "nxp,pca9555"; 388 reg = <0x23>; 389 gpio-controller; 390 #gpio-cells = <2>; 391 interrupt-parent = <&gsc>; 392 interrupts = <4>; 393 }; 394 395 eeprom1: eeprom@50 { 396 compatible = "atmel,24c02"; 397 reg = <0x50>; 398 pagesize = <16>; 399 }; 400 401 eeprom2: eeprom@51 { 402 compatible = "atmel,24c02"; 403 reg = <0x51>; 404 pagesize = <16>; 405 }; 406 407 eeprom3: eeprom@52 { 408 compatible = "atmel,24c02"; 409 reg = <0x52>; 410 pagesize = <16>; 411 }; 412 413 eeprom4: eeprom@53 { 414 compatible = "atmel,24c02"; 415 reg = <0x53>; 416 pagesize = <16>; 417 }; 418 419 dts1672: rtc@68 { 420 compatible = "dallas,ds1672"; 421 reg = <0x68>; 422 }; 423}; 424 425&i2c2 { 426 clock-frequency = <100000>; 427 pinctrl-names = "default"; 428 pinctrl-0 = <&pinctrl_i2c2>; 429 status = "okay"; 430 431 magn@1c { 432 compatible = "st,lsm9ds1-magn"; 433 reg = <0x1c>; 434 pinctrl-names = "default"; 435 pinctrl-0 = <&pinctrl_mag>; 436 interrupt-parent = <&gpio5>; 437 interrupts = <17 IRQ_TYPE_EDGE_RISING>; 438 }; 439 440 ltc3676: pmic@3c { 441 compatible = "lltc,ltc3676"; 442 reg = <0x3c>; 443 interrupt-parent = <&gpio1>; 444 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 445 446 regulators { 447 /* VDD_SOC (1+R1/R2 = 1.635) */ 448 reg_vdd_soc: sw1 { 449 regulator-name = "vddsoc"; 450 regulator-min-microvolt = <674400>; 451 regulator-max-microvolt = <1308000>; 452 lltc,fb-voltage-divider = <127000 200000>; 453 regulator-ramp-delay = <7000>; 454 regulator-boot-on; 455 regulator-always-on; 456 }; 457 458 /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */ 459 reg_1p8v: sw2 { 460 regulator-name = "vdd1p8"; 461 regulator-min-microvolt = <1033310>; 462 regulator-max-microvolt = <2004000>; 463 lltc,fb-voltage-divider = <301000 200000>; 464 regulator-ramp-delay = <7000>; 465 regulator-boot-on; 466 regulator-always-on; 467 }; 468 469 /* VDD_ARM (1+R1/R2 = 1.635) */ 470 reg_vdd_arm: sw3 { 471 regulator-name = "vddarm"; 472 regulator-min-microvolt = <674400>; 473 regulator-max-microvolt = <1308000>; 474 lltc,fb-voltage-divider = <127000 200000>; 475 regulator-ramp-delay = <7000>; 476 regulator-boot-on; 477 regulator-always-on; 478 }; 479 480 /* VDD_DDR (1+R1/R2 = 2.105) */ 481 reg_vdd_ddr: sw4 { 482 regulator-name = "vddddr"; 483 regulator-min-microvolt = <868310>; 484 regulator-max-microvolt = <1684000>; 485 lltc,fb-voltage-divider = <221000 200000>; 486 regulator-ramp-delay = <7000>; 487 regulator-boot-on; 488 regulator-always-on; 489 }; 490 491 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ 492 reg_2p5v: ldo2 { 493 regulator-name = "vdd2p5"; 494 regulator-min-microvolt = <2490375>; 495 regulator-max-microvolt = <2490375>; 496 lltc,fb-voltage-divider = <487000 200000>; 497 regulator-boot-on; 498 regulator-always-on; 499 }; 500 501 /* VDD_HIGH (1+R1/R2 = 4.17) */ 502 reg_3p0v: ldo4 { 503 regulator-name = "vdd3p0"; 504 regulator-min-microvolt = <3023250>; 505 regulator-max-microvolt = <3023250>; 506 lltc,fb-voltage-divider = <634000 200000>; 507 regulator-boot-on; 508 regulator-always-on; 509 }; 510 }; 511 }; 512 513 crypto@60 { 514 compatible = "atmel,atecc508a"; 515 reg = <0x60>; 516 }; 517 518 imu@6a { 519 compatible = "st,lsm9ds1-imu"; 520 reg = <0x6a>; 521 st,drdy-int-pin = <1>; 522 pinctrl-names = "default"; 523 pinctrl-0 = <&pinctrl_imu>; 524 interrupt-parent = <&gpio4>; 525 interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; 526 }; 527}; 528 529&i2c3 { 530 clock-frequency = <100000>; 531 pinctrl-names = "default"; 532 pinctrl-0 = <&pinctrl_i2c3>; 533 status = "okay"; 534 535 egalax_ts: touchscreen@4 { 536 compatible = "eeti,egalax_ts"; 537 reg = <0x04>; 538 interrupt-parent = <&gpio1>; 539 interrupts = <11 IRQ_TYPE_EDGE_FALLING>; 540 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; 541 }; 542}; 543 544&ldb { 545 status = "okay"; 546 547 lvds-channel@0 { 548 fsl,data-mapping = "spwg"; 549 fsl,data-width = <18>; 550 status = "okay"; 551 552 display-timings { 553 native-mode = <&timing0>; 554 timing0: timing-hsd100pxn1 { 555 clock-frequency = <65000000>; 556 hactive = <1024>; 557 vactive = <768>; 558 hback-porch = <220>; 559 hfront-porch = <40>; 560 vback-porch = <21>; 561 vfront-porch = <7>; 562 hsync-len = <60>; 563 vsync-len = <10>; 564 }; 565 }; 566 }; 567}; 568 569&pcie { 570 pinctrl-names = "default"; 571 pinctrl-0 = <&pinctrl_pcie>; 572 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; 573 status = "okay"; 574}; 575 576&pwm2 { 577 pinctrl-names = "default"; 578 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 579 status = "disabled"; 580}; 581 582&pwm3 { 583 pinctrl-names = "default"; 584 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 585 status = "disabled"; 586}; 587 588&pwm4 { 589 pinctrl-names = "default"; 590 pinctrl-0 = <&pinctrl_pwm4>; 591 status = "okay"; 592}; 593 594&uart1 { 595 pinctrl-names = "default"; 596 pinctrl-0 = <&pinctrl_uart1>; 597 status = "okay"; 598}; 599 600&uart2 { 601 pinctrl-names = "default"; 602 pinctrl-0 = <&pinctrl_uart2>; 603 status = "okay"; 604}; 605 606&uart3 { 607 pinctrl-names = "default"; 608 pinctrl-0 = <&pinctrl_uart3>; 609 uart-has-rtscts; 610 status = "okay"; 611}; 612 613&uart4 { 614 pinctrl-names = "default"; 615 pinctrl-0 = <&pinctrl_uart4>; 616 uart-has-rtscts; 617 status = "okay"; 618}; 619 620&uart5 { 621 pinctrl-names = "default"; 622 pinctrl-0 = <&pinctrl_uart5>; 623 status = "okay"; 624}; 625 626&usbotg { 627 vbus-supply = <®_usb_otg_vbus>; 628 pinctrl-names = "default"; 629 pinctrl-0 = <&pinctrl_usbotg>; 630 disable-over-current; 631 status = "okay"; 632}; 633 634&usbh1 { 635 vbus-supply = <®_usb_h1_vbus>; 636 status = "okay"; 637}; 638 639&usdhc3 { 640 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 641 pinctrl-0 = <&pinctrl_usdhc3>; 642 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 643 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 644 non-removable; 645 vmmc-supply = <®_3p3v>; 646 keep-power-in-suspend; 647 status = "okay"; 648}; 649 650&wdog1 { 651 pinctrl-names = "default"; 652 pinctrl-0 = <&pinctrl_wdog>; 653 fsl,ext-reset-output; 654}; 655 656&iomuxc { 657 pinctrl_enet: enetgrp { 658 fsl,pins = < 659 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 660 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 661 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 662 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 663 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 664 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 665 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 666 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 667 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 668 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 669 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 670 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 671 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 672 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 673 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 674 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 675 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ 676 >; 677 }; 678 679 pinctrl_gpio_leds: gpioledsgrp { 680 fsl,pins = < 681 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 682 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 683 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 684 >; 685 }; 686 687 pinctrl_i2c1: i2c1grp { 688 fsl,pins = < 689 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 690 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 691 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ 692 >; 693 }; 694 695 pinctrl_i2c2: i2c2grp { 696 fsl,pins = < 697 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 698 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 699 >; 700 }; 701 702 pinctrl_i2c3: i2c3grp { 703 fsl,pins = < 704 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 705 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 706 >; 707 }; 708 709 pinctrl_imu: imugrp { 710 fsl,pins = < 711 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 712 >; 713 }; 714 715 pinctrl_mag: maggrp { 716 fsl,pins = < 717 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 718 >; 719 }; 720 721 pinctrl_pcie: pciegrp { 722 fsl,pins = < 723 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ 724 >; 725 }; 726 727 pinctrl_pmic: pmicgrp { 728 fsl,pins = < 729 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ 730 >; 731 }; 732 733 pinctrl_pps: ppsgrp { 734 fsl,pins = < 735 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 736 >; 737 }; 738 739 pinctrl_pwm2: pwm2grp { 740 fsl,pins = < 741 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 742 >; 743 }; 744 745 pinctrl_pwm3: pwm3grp { 746 fsl,pins = < 747 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 748 >; 749 }; 750 751 pinctrl_pwm4: pwm4grp { 752 fsl,pins = < 753 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 754 >; 755 }; 756 757 pinctrl_uart1: uart1grp { 758 fsl,pins = < 759 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 760 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 761 >; 762 }; 763 764 pinctrl_uart2: uart2grp { 765 fsl,pins = < 766 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 767 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 768 >; 769 }; 770 771 pinctrl_uart3: uart3grp { 772 fsl,pins = < 773 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 774 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 775 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 776 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 777 >; 778 }; 779 780 pinctrl_uart4: uart4grp { 781 fsl,pins = < 782 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 783 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 784 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 785 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 786 >; 787 }; 788 789 pinctrl_uart5: uart5grp { 790 fsl,pins = < 791 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 792 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 793 >; 794 }; 795 796 pinctrl_usbotg: usbotggrp { 797 fsl,pins = < 798 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 799 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ 800 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ 801 >; 802 }; 803 804 pinctrl_usdhc3: usdhc3grp { 805 fsl,pins = < 806 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 807 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 808 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 809 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 810 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 811 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 812 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 813 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 814 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 815 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 816 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 817 >; 818 }; 819 820 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { 821 fsl,pins = < 822 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 823 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 824 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 825 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 826 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 827 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 828 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 829 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 830 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 831 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 832 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 833 >; 834 }; 835 836 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { 837 fsl,pins = < 838 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 839 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 840 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 841 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 842 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 843 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 844 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 845 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 846 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 847 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 848 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 849 >; 850 }; 851 852 pinctrl_wdog: wdoggrp { 853 fsl,pins = < 854 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 855 >; 856 }; 857}; 858