xref: /linux/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of
12 *     the License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/linux-event-codes.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53	chosen {
54		stdout-path = &uart2;
55	};
56
57	backlight {
58		compatible = "pwm-backlight";
59		pwms = <&pwm1 0 5000000 0>;
60		brightness-levels = <
61			0  1  2  3  4  5  6  7  8  9
62			10 11 12 13 14 15 16 17 18 19
63			20 21 22 23 24 25 26 27 28 29
64			30 31 32 33 34 35 36 37 38 39
65			40 41 42 43 44 45 46 47 48 49
66			50 51 52 53 54 55 56 57 58 59
67			60 61 62 63 64 65 66 67 68 69
68			70 71 72 73 74 75 76 77 78 79
69			80 81 82 83 84 85 86 87 88 89
70			90 91 92 93 94 95 96 97 98 99
71			100
72			>;
73		default-brightness-level = <100>;
74	};
75
76	gpio-keys {
77		compatible = "gpio-keys";
78
79		user-pb {
80			label = "user_pb";
81			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
82			linux,code = <BTN_0>;
83		};
84
85		user-pb1x {
86			label = "user_pb1x";
87			linux,code = <BTN_1>;
88			interrupt-parent = <&gsc>;
89			interrupts = <0>;
90		};
91
92		key-erased {
93			label = "key-erased";
94			linux,code = <BTN_2>;
95			interrupt-parent = <&gsc>;
96			interrupts = <1>;
97		};
98
99		eeprom-wp {
100			label = "eeprom_wp";
101			linux,code = <BTN_3>;
102			interrupt-parent = <&gsc>;
103			interrupts = <2>;
104		};
105
106		tamper {
107			label = "tamper";
108			linux,code = <BTN_4>;
109			interrupt-parent = <&gsc>;
110			interrupts = <5>;
111		};
112
113		switch-hold {
114			label = "switch_hold";
115			linux,code = <BTN_5>;
116			interrupt-parent = <&gsc>;
117			interrupts = <7>;
118		};
119	};
120
121	leds {
122		compatible = "gpio-leds";
123		pinctrl-names = "default";
124		pinctrl-0 = <&pinctrl_gpio_leds>;
125
126		led0: led-user1 {
127			label = "user1";
128			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
129			default-state = "off";
130		};
131	};
132
133	memory@10000000 {
134		device_type = "memory";
135		reg = <0x10000000 0x40000000>;
136	};
137
138	reg_5p0v: regulator-5p0v {
139		compatible = "regulator-fixed";
140		regulator-name = "5P0V";
141		regulator-min-microvolt = <5000000>;
142		regulator-max-microvolt = <5000000>;
143		regulator-always-on;
144	};
145
146	reg_3p3v: regulator-3p3v {
147		compatible = "regulator-fixed";
148		regulator-name = "3P3V";
149		regulator-min-microvolt = <3300000>;
150		regulator-max-microvolt = <3300000>;
151		regulator-always-on;
152	};
153
154	reg_2p5v: regulator-2p5v {
155		compatible = "regulator-fixed";
156		regulator-name = "2P5V";
157		regulator-min-microvolt = <2500000>;
158		regulator-max-microvolt = <2500000>;
159		regulator-always-on;
160	};
161
162	reg_usb_h1_vbus: regulator-usb-h1-vbus {
163		compatible = "regulator-fixed";
164		regulator-name = "usb_h1_vbus";
165		regulator-min-microvolt = <5000000>;
166		regulator-max-microvolt = <5000000>;
167		gpio = <&gpio3 30 0>;
168		enable-active-high;
169	};
170
171	reg_usb_otg_vbus: regulator-usb-otg-vbus {
172		compatible = "regulator-fixed";
173		regulator-name = "usb_otg_vbus";
174		regulator-min-microvolt = <5000000>;
175		regulator-max-microvolt = <5000000>;
176		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
177		enable-active-high;
178	};
179
180	reg_12p0: regulator-12p0v {
181		compatible = "regulator-fixed";
182		regulator-name = "12P0V";
183		regulator-min-microvolt = <12000000>;
184		regulator-max-microvolt = <12000000>;
185		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
186		enable-active-high;
187	};
188
189	sound {
190		compatible = "fsl,imx-audio-tlv320";
191		model = "imx-tlv320";
192		ssi-controller = <&ssi1>;
193		audio-codec = <&tlv320aic3105>;
194		/* routing of sink, source */
195		audio-routing =
196			/* TLV320 LINE1L pin <-> Mic Jack connector */
197			"LINE1L", "Mic Jack",
198			/* board Headphone Jack <-> HPOUT */
199			"Headphone Jack", "HPLOUT",
200			"Headphone Jack", "HPROUT",
201			"Mic Jack", "Mic Bias";
202		mux-int-port = <1>;
203		mux-ext-port = <6>;
204	};
205};
206
207&audmux {
208	pinctrl-names = "default";
209	pinctrl-0 = <&pinctrl_audmux>;
210	status = "okay";
211};
212
213&clks {
214	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
215			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
216	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
217				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
218};
219
220&fec {
221	pinctrl-names = "default";
222	pinctrl-0 = <&pinctrl_enet>;
223	phy-mode = "rgmii-id";
224	status = "okay";
225};
226
227&i2c1 {
228	clock-frequency = <100000>;
229	pinctrl-names = "default";
230	pinctrl-0 = <&pinctrl_i2c1>;
231	status = "okay";
232
233	gsc: gsc@20 {
234		compatible = "gw,gsc";
235		reg = <0x20>;
236		interrupt-parent = <&gpio1>;
237		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
238		interrupt-controller;
239		#interrupt-cells = <1>;
240		#size-cells = <0>;
241
242		adc {
243			compatible = "gw,gsc-adc";
244			#address-cells = <1>;
245			#size-cells = <0>;
246
247			channel@0 {
248				gw,mode = <0>;
249				reg = <0x00>;
250				label = "temp";
251			};
252
253			channel@2 {
254				gw,mode = <1>;
255				reg = <0x02>;
256				label = "vdd_vin";
257			};
258
259			channel@5 {
260				gw,mode = <1>;
261				reg = <0x05>;
262				label = "vdd_3p3";
263			};
264
265			channel@8 {
266				gw,mode = <1>;
267				reg = <0x08>;
268				label = "vdd_bat";
269			};
270
271			channel@b {
272				gw,mode = <1>;
273				reg = <0x0b>;
274				label = "vdd_5p0";
275			};
276
277			channel@e {
278				gw,mode = <1>;
279				reg = <0xe>;
280				label = "vdd_arm";
281			};
282
283			channel@11 {
284				gw,mode = <1>;
285				reg = <0x11>;
286				label = "vdd_soc";
287			};
288
289			channel@14 {
290				gw,mode = <1>;
291				reg = <0x14>;
292				label = "vdd_3p0";
293			};
294
295			channel@17 {
296				gw,mode = <1>;
297				reg = <0x17>;
298				label = "vdd_1p5";
299			};
300
301			channel@1d {
302				gw,mode = <1>;
303				reg = <0x1d>;
304				label = "vdd_1p8";
305			};
306
307			channel@20 {
308				gw,mode = <1>;
309				reg = <0x20>;
310				label = "vdd_an1";
311			};
312
313			channel@23 {
314				gw,mode = <1>;
315				reg = <0x23>;
316				label = "vdd_2p5";
317			};
318		};
319	};
320
321	gsc_gpio: gpio@23 {
322		compatible = "nxp,pca9555";
323		reg = <0x23>;
324		gpio-controller;
325		#gpio-cells = <2>;
326		interrupt-parent = <&gsc>;
327		interrupts = <4>;
328	};
329
330	eeprom1: eeprom@50 {
331		compatible = "atmel,24c02";
332		reg = <0x50>;
333		pagesize = <16>;
334	};
335
336	eeprom2: eeprom@51 {
337		compatible = "atmel,24c02";
338		reg = <0x51>;
339		pagesize = <16>;
340	};
341
342	eeprom3: eeprom@52 {
343		compatible = "atmel,24c02";
344		reg = <0x52>;
345		pagesize = <16>;
346	};
347
348	eeprom4: eeprom@53 {
349		compatible = "atmel,24c02";
350		reg = <0x53>;
351		pagesize = <16>;
352	};
353
354	dts1672: rtc@68 {
355		compatible = "dallas,ds1672";
356		reg = <0x68>;
357	};
358};
359
360&i2c2 {
361	clock-frequency = <400000>;
362	pinctrl-names = "default";
363	pinctrl-0 = <&pinctrl_i2c2>;
364	status = "okay";
365
366	ltc3676: pmic@3c {
367		compatible = "lltc,ltc3676";
368		reg = <0x3c>;
369		interrupt-parent = <&gpio1>;
370		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
371
372		regulators {
373			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
374			reg_1p8v: sw1 {
375				regulator-name = "vdd1p8";
376				regulator-min-microvolt = <1033310>;
377				regulator-max-microvolt = <2004000>;
378				lltc,fb-voltage-divider = <301000 200000>;
379				regulator-ramp-delay = <7000>;
380				regulator-boot-on;
381				regulator-always-on;
382			};
383
384			/* VDD_DDR (1+R1/R2 = 2.105) */
385			reg_vdd_ddr: sw2 {
386				regulator-name = "vddddr";
387				regulator-min-microvolt = <868310>;
388				regulator-max-microvolt = <1684000>;
389				lltc,fb-voltage-divider = <221000 200000>;
390				regulator-ramp-delay = <7000>;
391				regulator-boot-on;
392				regulator-always-on;
393			};
394
395			/* VDD_ARM (1+R1/R2 = 1.635) */
396			reg_vdd_arm: sw3 {
397				regulator-name = "vddarm";
398				regulator-min-microvolt = <674400>;
399				regulator-max-microvolt = <1308000>;
400				lltc,fb-voltage-divider = <127000 200000>;
401				regulator-ramp-delay = <7000>;
402				regulator-boot-on;
403				regulator-always-on;
404				linux,phandle = <&reg_vdd_arm>;
405			};
406
407			/* VDD_SOC (1+R1/R2 = 1.635) */
408			reg_vdd_soc: sw4 {
409				regulator-name = "vddsoc";
410				regulator-min-microvolt = <674400>;
411				regulator-max-microvolt = <1308000>;
412				lltc,fb-voltage-divider = <127000 200000>;
413				regulator-ramp-delay = <7000>;
414				regulator-boot-on;
415				regulator-always-on;
416				linux,phandle = <&reg_vdd_soc>;
417			};
418
419			/* VDD_1P0 (1+R1/R2 = 1.38): */
420			reg_1p0v: ldo2 {
421				regulator-name = "vdd1p0";
422				regulator-min-microvolt = <1002777>;
423				regulator-max-microvolt = <1002777>;
424				lltc,fb-voltage-divider = <100000 261000>;
425				regulator-boot-on;
426				regulator-always-on;
427			};
428
429			/* VDD_HIGH (1+R1/R2 = 4.17) */
430			reg_3p0v: ldo4 {
431				regulator-name = "vdd3p0";
432				regulator-min-microvolt = <3023250>;
433				regulator-max-microvolt = <3023250>;
434				lltc,fb-voltage-divider = <634000 200000>;
435				regulator-boot-on;
436				regulator-always-on;
437			};
438		};
439	};
440};
441
442&i2c3 {
443	clock-frequency = <400000>;
444	pinctrl-names = "default";
445	pinctrl-0 = <&pinctrl_i2c3>;
446	status = "okay";
447
448	tlv320aic3105: codec@18 {
449		compatible = "ti,tlv320aic3x";
450		reg = <0x18>;
451		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
452		clocks = <&clks IMX6QDL_CLK_CKO>;
453		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
454		/* Regulators */
455		DRVDD-supply = <&reg_3p3v>;
456		AVDD-supply = <&reg_3p3v>;
457		IOVDD-supply = <&reg_3p3v>;
458		DVDD-supply = <&reg_1p8v>;
459	};
460
461	accelerometer@1d {
462		compatible = "fsl,mma8451";
463		reg = <0x1d>;
464		interrupt-parent = <&gpio7>;
465		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
466		interrupt-names = "INT2";
467	};
468
469	/* headphone detect */
470	ts3a227e@3b {
471		compatible = "ti,ts3a227e";
472		reg = <0x3b>;
473		interrupt-parent = <&gpio5>;
474		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
475		ti,micbias = <4>; /* 2.5V micbias */
476	};
477};
478
479&ldb {
480	status = "okay";
481
482	lvds-channel@0 {
483		fsl,data-mapping = "spwg";
484		fsl,data-width = <18>;
485		status = "okay";
486
487		display-timings {
488			native-mode = <&timing0>;
489			timing0: timing-g101evn010 {
490				clock-frequency = <68930000>;
491				hactive = <1280>;
492				vactive = <800>;
493				hback-porch = <220>;
494				hfront-porch = <40>;
495				vback-porch = <21>;
496				vfront-porch = <7>;
497				hsync-len = <60>;
498				vsync-len = <10>;
499			};
500		};
501	};
502};
503
504&pwm1 {
505	pinctrl-names = "default";
506	pinctrl-0 = <&pinctrl_pwm1>;
507	status = "okay";
508};
509
510&ssi1 {
511	status = "okay";
512};
513
514&uart1 {
515	pinctrl-names = "default";
516	pinctrl-0 = <&pinctrl_uart1>;
517	status = "okay";
518};
519
520&uart2 {
521	pinctrl-names = "default";
522	pinctrl-0 = <&pinctrl_uart2>;
523	status = "okay";
524};
525
526&usbotg {
527	vbus-supply = <&reg_usb_otg_vbus>;
528	pinctrl-names = "default";
529	pinctrl-0 = <&pinctrl_usbotg>;
530	disable-over-current;
531	status = "okay";
532};
533
534&usbh1 {
535	vbus-supply = <&reg_usb_h1_vbus>;
536	status = "okay";
537};
538
539&usdhc1 {
540	pinctrl-names = "default";
541	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
542	vmmc-supply = <&reg_3p3v>;
543	non-removable;
544	bus-width = <4>;
545	status = "okay";
546};
547
548&usdhc2 {
549	pinctrl-names = "default", "state_100mhz", "state_200mhz";
550	pinctrl-0 = <&pinctrl_usdhc2>;
551	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
552	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
553	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
554	vmmc-supply = <&reg_3p3v>;
555	max-frequency = <100000000>;
556	status = "okay";
557};
558
559&usdhc3 {
560	pinctrl-names = "default", "state_100mhz", "state_200mhz";
561	pinctrl-0 = <&pinctrl_usdhc3>;
562	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
563	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
564	non-removable;
565	vmmc-supply = <&reg_3p3v>;
566	keep-power-in-suspend;
567	status = "okay";
568};
569
570&wdog1 {
571	pinctrl-names = "default";
572	pinctrl-0 = <&pinctrl_wdog>;
573	fsl,ext-reset-output;
574};
575
576&iomuxc {
577	pinctrl_audmux: audmuxgrp {
578		fsl,pins = <
579			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
580			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
581			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
582			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
583			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
584		>;
585	};
586
587	pinctrl_enet: enetgrp {
588		fsl,pins = <
589			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
590			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
591			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
592			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
593			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
594			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
595			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
596			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
597			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
598			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
599			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
600			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
601			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
602			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
603			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
604			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
605			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
606		>;
607	};
608
609	pinctrl_gpio_leds: gpioledsgrp {
610		fsl,pins = <
611			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
612		>;
613	};
614
615	pinctrl_i2c1: i2c1grp {
616		fsl,pins = <
617			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
618			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
619			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
620		>;
621	};
622
623	pinctrl_i2c2: i2c2grp {
624		fsl,pins = <
625			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
626			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
627			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
628		>;
629	};
630
631	pinctrl_i2c3: i2c3grp {
632		fsl,pins = <
633			/* I2C3 */
634			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
635			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
636
637			/* Headphone Detect */
638			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
639			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
640
641			/* Codec */
642			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
643
644			/* Touch Controller */
645			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
646			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
647
648			/* Stow Sensor */
649			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
650			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
651		>;
652	};
653
654	pinctrl_pwm1: pwm1grp {
655		fsl,pins = <
656			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
657		>;
658	};
659
660	pinctrl_uart1: uart1grp {
661		fsl,pins = <
662			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
663			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
664			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
665		>;
666	};
667
668	pinctrl_uart2: uart2grp {
669		fsl,pins = <
670			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
671			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
672		>;
673	};
674
675	pinctrl_usbotg: usbotggrp {
676		fsl,pins = <
677			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
678			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
679			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
680		>;
681	};
682
683	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
684		fsl,pins = <
685			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
686			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
687			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
688			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
689			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
690
691			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
692			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
693			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
694			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
695			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
696			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
697		>;
698	};
699
700	pinctrl_usdhc2: usdhc2grp {
701		fsl,pins = <
702			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
703			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
704			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
705			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
706			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
707			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
708			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
709			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
710		>;
711	};
712
713	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
714		fsl,pins = <
715			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
716			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
717			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
718			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
719			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
720			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
721			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
722			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
723		>;
724	};
725
726	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
727		fsl,pins = <
728			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
729			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
730			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
731			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
732			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
733			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
734			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
735			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
736		>;
737	};
738
739	pinctrl_usdhc3: usdhc3grp {
740		fsl,pins = <
741			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
742			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
743			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
744			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
745			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
746			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
747			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
748			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
749			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
750			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
751			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
752		>;
753	};
754
755	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
756		fsl,pins = <
757			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
758			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
759			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
760			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
761			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
762			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
763			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
764			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
765			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
766			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
767			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
768		>;
769	};
770
771	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
772		fsl,pins = <
773			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
774			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
775			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
776			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
777			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
778			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
779			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
780			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
781			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
782			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
783			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
784		>;
785	};
786
787	pinctrl_wdog: wdoggrp {
788		fsl,pins = <
789			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
790		>;
791	};
792};
793