1/* 2 * Copyright 2017 Gateworks Corporation 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include <dt-bindings/gpio/gpio.h> 49#include <dt-bindings/input/input.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51 52/ { 53 /* these are used by bootloader for disabling nodes */ 54 aliases { 55 led0 = &led0; 56 led1 = &led1; 57 led2 = &led2; 58 ssi0 = &ssi1; 59 usb0 = &usbh1; 60 usb1 = &usbotg; 61 }; 62 63 chosen { 64 stdout-path = &uart2; 65 }; 66 67 backlight-display { 68 compatible = "pwm-backlight"; 69 pwms = <&pwm4 0 5000000 0>; 70 brightness-levels = < 71 0 1 2 3 4 5 6 7 8 9 72 10 11 12 13 14 15 16 17 18 19 73 20 21 22 23 24 25 26 27 28 29 74 30 31 32 33 34 35 36 37 38 39 75 40 41 42 43 44 45 46 47 48 49 76 50 51 52 53 54 55 56 57 58 59 77 60 61 62 63 64 65 66 67 68 69 78 70 71 72 73 74 75 76 77 78 79 79 80 81 82 83 84 85 86 87 88 89 80 90 91 92 93 94 95 96 97 98 99 81 100 82 >; 83 default-brightness-level = <100>; 84 }; 85 86 backlight-keypad { 87 compatible = "gpio-backlight"; 88 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; 89 default-on; 90 }; 91 92 gpio-keys { 93 compatible = "gpio-keys"; 94 95 user-pb { 96 label = "user_pb"; 97 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 98 linux,code = <BTN_0>; 99 }; 100 101 user-pb1x { 102 label = "user_pb1x"; 103 linux,code = <BTN_1>; 104 interrupt-parent = <&gsc>; 105 interrupts = <0>; 106 }; 107 108 key-erased { 109 label = "key-erased"; 110 linux,code = <BTN_2>; 111 interrupt-parent = <&gsc>; 112 interrupts = <1>; 113 }; 114 115 eeprom-wp { 116 label = "eeprom_wp"; 117 linux,code = <BTN_3>; 118 interrupt-parent = <&gsc>; 119 interrupts = <2>; 120 }; 121 122 tamper { 123 label = "tamper"; 124 linux,code = <BTN_4>; 125 interrupt-parent = <&gsc>; 126 interrupts = <5>; 127 }; 128 129 switch-hold { 130 label = "switch_hold"; 131 linux,code = <BTN_5>; 132 interrupt-parent = <&gsc>; 133 interrupts = <7>; 134 }; 135 }; 136 137 leds { 138 compatible = "gpio-leds"; 139 pinctrl-names = "default"; 140 pinctrl-0 = <&pinctrl_gpio_leds>; 141 142 led0: led-user1 { 143 label = "user1"; 144 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 145 default-state = "on"; 146 linux,default-trigger = "heartbeat"; 147 }; 148 149 led1: led-user2 { 150 label = "user2"; 151 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 152 default-state = "off"; 153 }; 154 155 led2: led-user3 { 156 label = "user3"; 157 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 158 default-state = "off"; 159 }; 160 }; 161 162 memory@10000000 { 163 device_type = "memory"; 164 reg = <0x10000000 0x40000000>; 165 }; 166 167 pps { 168 compatible = "pps-gpio"; 169 pinctrl-names = "default"; 170 pinctrl-0 = <&pinctrl_pps>; 171 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 172 }; 173 174 reg_2p5v: regulator-2p5v { 175 compatible = "regulator-fixed"; 176 regulator-name = "2P5V"; 177 regulator-min-microvolt = <2500000>; 178 regulator-max-microvolt = <2500000>; 179 regulator-always-on; 180 }; 181 182 reg_3p3v: regulator-3p3v { 183 compatible = "regulator-fixed"; 184 regulator-name = "3P3V"; 185 regulator-min-microvolt = <3300000>; 186 regulator-max-microvolt = <3300000>; 187 regulator-always-on; 188 }; 189 190 reg_5p0v: regulator-5p0v { 191 compatible = "regulator-fixed"; 192 regulator-name = "5P0V"; 193 regulator-min-microvolt = <5000000>; 194 regulator-max-microvolt = <5000000>; 195 regulator-always-on; 196 }; 197 198 reg_12p0v: regulator-12p0v { 199 compatible = "regulator-fixed"; 200 regulator-name = "12P0V"; 201 regulator-min-microvolt = <12000000>; 202 regulator-max-microvolt = <12000000>; 203 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; 204 enable-active-high; 205 }; 206 207 reg_1p4v: regulator-vddsoc { 208 compatible = "regulator-fixed"; 209 regulator-name = "vdd_soc"; 210 regulator-min-microvolt = <1400000>; 211 regulator-max-microvolt = <1400000>; 212 regulator-always-on; 213 }; 214 215 reg_usb_h1_vbus: regulator-usb-h1-vbus { 216 compatible = "regulator-fixed"; 217 regulator-name = "usb_h1_vbus"; 218 regulator-min-microvolt = <5000000>; 219 regulator-max-microvolt = <5000000>; 220 regulator-always-on; 221 }; 222 223 reg_usb_otg_vbus: regulator-usb-otg-vbus { 224 compatible = "regulator-fixed"; 225 regulator-name = "usb_otg_vbus"; 226 regulator-min-microvolt = <5000000>; 227 regulator-max-microvolt = <5000000>; 228 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 229 enable-active-high; 230 }; 231 232 sound { 233 compatible = "fsl,imx6q-ventana-sgtl5000", 234 "fsl,imx-audio-sgtl5000"; 235 model = "sgtl5000-audio"; 236 ssi-controller = <&ssi1>; 237 audio-codec = <&sgtl5000>; 238 audio-routing = 239 "MIC_IN", "Mic Jack", 240 "Mic Jack", "Mic Bias", 241 "Headphone Jack", "HP_OUT"; 242 mux-int-port = <1>; 243 mux-ext-port = <4>; 244 }; 245}; 246 247&audmux { 248 pinctrl-names = "default"; 249 pinctrl-0 = <&pinctrl_audmux>; 250 status = "okay"; 251}; 252 253&ecspi3 { 254 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 255 pinctrl-names = "default"; 256 pinctrl-0 = <&pinctrl_ecspi3>; 257 status = "okay"; 258}; 259 260&can1 { 261 pinctrl-names = "default"; 262 pinctrl-0 = <&pinctrl_flexcan>; 263 status = "okay"; 264}; 265 266&clks { 267 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 268 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 269 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 270 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 271}; 272 273&fec { 274 pinctrl-names = "default"; 275 pinctrl-0 = <&pinctrl_enet>; 276 phy-mode = "rgmii-id"; 277 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 278 status = "okay"; 279}; 280 281&hdmi { 282 ddc-i2c-bus = <&i2c3>; 283 status = "okay"; 284}; 285 286&i2c1 { 287 clock-frequency = <100000>; 288 pinctrl-names = "default"; 289 pinctrl-0 = <&pinctrl_i2c1>; 290 status = "okay"; 291 292 gsc: gsc@20 { 293 compatible = "gw,gsc"; 294 reg = <0x20>; 295 interrupt-parent = <&gpio1>; 296 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 297 interrupt-controller; 298 #interrupt-cells = <1>; 299 #size-cells = <0>; 300 301 adc { 302 compatible = "gw,gsc-adc"; 303 #address-cells = <1>; 304 #size-cells = <0>; 305 306 channel@0 { 307 gw,mode = <0>; 308 reg = <0x00>; 309 label = "temp"; 310 }; 311 312 channel@2 { 313 gw,mode = <1>; 314 reg = <0x02>; 315 label = "vdd_vin"; 316 }; 317 318 channel@5 { 319 gw,mode = <1>; 320 reg = <0x05>; 321 label = "vdd_3p3"; 322 }; 323 324 channel@8 { 325 gw,mode = <1>; 326 reg = <0x08>; 327 label = "vdd_bat"; 328 }; 329 330 channel@b { 331 gw,mode = <1>; 332 reg = <0x0b>; 333 label = "vdd_5p0"; 334 }; 335 336 channel@e { 337 gw,mode = <1>; 338 reg = <0xe>; 339 label = "vdd_arm"; 340 }; 341 342 channel@11 { 343 gw,mode = <1>; 344 reg = <0x11>; 345 label = "vdd_soc"; 346 }; 347 348 channel@14 { 349 gw,mode = <1>; 350 reg = <0x14>; 351 label = "vdd_3p0"; 352 }; 353 354 channel@17 { 355 gw,mode = <1>; 356 reg = <0x17>; 357 label = "vdd_1p5"; 358 }; 359 360 channel@1d { 361 gw,mode = <1>; 362 reg = <0x1d>; 363 label = "vdd_1p8"; 364 }; 365 366 channel@20 { 367 gw,mode = <1>; 368 reg = <0x20>; 369 label = "vdd_an1"; 370 }; 371 372 channel@23 { 373 gw,mode = <1>; 374 reg = <0x23>; 375 label = "vdd_2p5"; 376 }; 377 378 channel@26 { 379 gw,mode = <1>; 380 reg = <0x26>; 381 label = "vdd_gps"; 382 }; 383 384 channel@29 { 385 gw,mode = <1>; 386 reg = <0x29>; 387 label = "vdd_an2"; 388 }; 389 }; 390 }; 391 392 gsc_gpio: gpio@23 { 393 compatible = "nxp,pca9555"; 394 reg = <0x23>; 395 gpio-controller; 396 #gpio-cells = <2>; 397 interrupt-parent = <&gsc>; 398 interrupts = <4>; 399 }; 400 401 eeprom1: eeprom@50 { 402 compatible = "atmel,24c02"; 403 reg = <0x50>; 404 pagesize = <16>; 405 }; 406 407 eeprom2: eeprom@51 { 408 compatible = "atmel,24c02"; 409 reg = <0x51>; 410 pagesize = <16>; 411 }; 412 413 eeprom3: eeprom@52 { 414 compatible = "atmel,24c02"; 415 reg = <0x52>; 416 pagesize = <16>; 417 }; 418 419 eeprom4: eeprom@53 { 420 compatible = "atmel,24c02"; 421 reg = <0x53>; 422 pagesize = <16>; 423 }; 424 425 ds1672: rtc@68 { 426 compatible = "dallas,ds1672"; 427 reg = <0x68>; 428 }; 429}; 430 431&i2c2 { 432 clock-frequency = <100000>; 433 pinctrl-names = "default"; 434 pinctrl-0 = <&pinctrl_i2c2>; 435 status = "okay"; 436 437 sgtl5000: codec@a { 438 compatible = "fsl,sgtl5000"; 439 reg = <0x0a>; 440 #sound-dai-cells = <0>; 441 clocks = <&clks IMX6QDL_CLK_CKO>; 442 VDDA-supply = <®_1p8v>; 443 VDDIO-supply = <®_3p3v>; 444 }; 445 446 magn@1c { 447 compatible = "st,lsm9ds1-magn"; 448 reg = <0x1c>; 449 pinctrl-names = "default"; 450 pinctrl-0 = <&pinctrl_mag>; 451 interrupt-parent = <&gpio5>; 452 interrupts = <9 IRQ_TYPE_EDGE_RISING>; 453 }; 454 455 tca8418: keypad@34 { 456 compatible = "ti,tca8418"; 457 pinctrl-names = "default"; 458 pinctrl-0 = <&pinctrl_keypad>; 459 reg = <0x34>; 460 interrupt-parent = <&gpio5>; 461 interrupts = <11 IRQ_TYPE_EDGE_FALLING>; 462 linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) 463 MATRIX_KEY(0x00, 0x00, BTN_1) 464 MATRIX_KEY(0x01, 0x01, BTN_2) 465 MATRIX_KEY(0x01, 0x00, BTN_3) 466 MATRIX_KEY(0x02, 0x00, BTN_4) 467 MATRIX_KEY(0x00, 0x03, BTN_5) 468 MATRIX_KEY(0x00, 0x02, BTN_6) 469 MATRIX_KEY(0x01, 0x03, BTN_7) 470 MATRIX_KEY(0x01, 0x02, BTN_8) 471 MATRIX_KEY(0x02, 0x02, BTN_9) 472 >; 473 keypad,num-rows = <4>; 474 keypad,num-columns = <4>; 475 }; 476 477 ltc3676: pmic@3c { 478 compatible = "lltc,ltc3676"; 479 pinctrl-names = "default"; 480 pinctrl-0 = <&pinctrl_pmic>; 481 reg = <0x3c>; 482 interrupt-parent = <&gpio1>; 483 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 484 485 regulators { 486 /* VDD_DDR (1+R1/R2 = 2.105) */ 487 reg_vdd_ddr: sw2 { 488 regulator-name = "vddddr"; 489 regulator-min-microvolt = <868310>; 490 regulator-max-microvolt = <1684000>; 491 lltc,fb-voltage-divider = <221000 200000>; 492 regulator-ramp-delay = <7000>; 493 regulator-boot-on; 494 regulator-always-on; 495 }; 496 497 /* VDD_ARM (1+R1/R2 = 1.931) */ 498 reg_vdd_arm: sw3 { 499 regulator-name = "vddarm"; 500 regulator-min-microvolt = <796551>; 501 regulator-max-microvolt = <1544827>; 502 lltc,fb-voltage-divider = <243000 261000>; 503 regulator-ramp-delay = <7000>; 504 regulator-boot-on; 505 regulator-always-on; 506 linux,phandle = <®_vdd_arm>; 507 }; 508 509 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ 510 reg_1p8v: sw4 { 511 regulator-name = "vdd1p8"; 512 regulator-min-microvolt = <1033310>; 513 regulator-max-microvolt = <2004000>; 514 lltc,fb-voltage-divider = <301000 200000>; 515 regulator-ramp-delay = <7000>; 516 regulator-boot-on; 517 regulator-always-on; 518 }; 519 520 /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ 521 reg_1p0v: ldo2 { 522 regulator-name = "vdd1p0"; 523 regulator-min-microvolt = <950000>; 524 regulator-max-microvolt = <1050000>; 525 lltc,fb-voltage-divider = <78700 200000>; 526 regulator-boot-on; 527 regulator-always-on; 528 }; 529 530 /* VDD_AUD_1P8: Audio codec */ 531 reg_aud_1p8v: ldo3 { 532 regulator-name = "vdd1p8a"; 533 regulator-min-microvolt = <1800000>; 534 regulator-max-microvolt = <1800000>; 535 regulator-boot-on; 536 }; 537 538 /* VDD_HIGH (1+R1/R2 = 4.17) */ 539 reg_3p0v: ldo4 { 540 regulator-name = "vdd3p0"; 541 regulator-min-microvolt = <3023250>; 542 regulator-max-microvolt = <3023250>; 543 lltc,fb-voltage-divider = <634000 200000>; 544 regulator-boot-on; 545 regulator-always-on; 546 }; 547 }; 548 }; 549 550 imu@6a { 551 compatible = "st,lsm9ds1-imu"; 552 reg = <0x6a>; 553 st,drdy-int-pin = <1>; 554 pinctrl-names = "default"; 555 pinctrl-0 = <&pinctrl_imu>; 556 interrupt-parent = <&gpio5>; 557 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; 558 }; 559}; 560 561&i2c3 { 562 clock-frequency = <100000>; 563 pinctrl-names = "default"; 564 pinctrl-0 = <&pinctrl_i2c3>; 565 status = "okay"; 566 567 egalax_ts: touchscreen@4 { 568 compatible = "eeti,egalax_ts"; 569 reg = <0x04>; 570 interrupt-parent = <&gpio5>; 571 interrupts = <12 IRQ_TYPE_EDGE_FALLING>; 572 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 573 }; 574}; 575 576&ldb { 577 fsl,dual-channel; 578 status = "okay"; 579 580 lvds-channel@0 { 581 fsl,data-mapping = "spwg"; 582 fsl,data-width = <18>; 583 status = "okay"; 584 585 display-timings { 586 native-mode = <&timing0>; 587 timing0: timing-hsd100pxn1 { 588 clock-frequency = <65000000>; 589 hactive = <1024>; 590 vactive = <768>; 591 hback-porch = <220>; 592 hfront-porch = <40>; 593 vback-porch = <21>; 594 vfront-porch = <7>; 595 hsync-len = <60>; 596 vsync-len = <10>; 597 }; 598 }; 599 }; 600}; 601 602&pcie { 603 pinctrl-names = "default"; 604 pinctrl-0 = <&pinctrl_pcie>; 605 reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; 606 status = "okay"; 607}; 608 609&pwm2 { 610 pinctrl-names = "default"; 611 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 612 status = "disabled"; 613}; 614 615&pwm3 { 616 pinctrl-names = "default"; 617 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 618 status = "disabled"; 619}; 620 621&pwm4 { 622 pinctrl-names = "default"; 623 pinctrl-0 = <&pinctrl_pwm4>; 624 status = "okay"; 625}; 626 627&ssi1 { 628 status = "okay"; 629}; 630 631&uart1 { 632 pinctrl-names = "default"; 633 pinctrl-0 = <&pinctrl_uart1>; 634 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 635 status = "okay"; 636}; 637 638&uart2 { 639 pinctrl-names = "default"; 640 pinctrl-0 = <&pinctrl_uart2>; 641 status = "okay"; 642}; 643 644&uart5 { 645 pinctrl-names = "default"; 646 pinctrl-0 = <&pinctrl_uart5>; 647 status = "okay"; 648}; 649 650&usbotg { 651 vbus-supply = <®_usb_otg_vbus>; 652 pinctrl-names = "default"; 653 pinctrl-0 = <&pinctrl_usbotg>; 654 disable-over-current; 655 status = "okay"; 656}; 657 658&usbh1 { 659 vbus-supply = <®_usb_h1_vbus>; 660 pinctrl-names = "default"; 661 pinctrl-0 = <&pinctrl_usbh1>; 662 status = "okay"; 663}; 664 665&usdhc2 { 666 pinctrl-names = "default"; 667 pinctrl-0 = <&pinctrl_usdhc2>; 668 bus-width = <8>; 669 vmmc-supply = <®_3p3v>; 670 non-removable; 671 status = "okay"; 672}; 673 674&usdhc3 { 675 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 676 pinctrl-0 = <&pinctrl_usdhc3>; 677 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 678 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 679 cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 680 vmmc-supply = <®_3p3v>; 681 status = "okay"; 682}; 683 684&wdog1 { 685 pinctrl-names = "default"; 686 pinctrl-0 = <&pinctrl_wdog>; 687 fsl,ext-reset-output; 688}; 689 690&iomuxc { 691 pinctrl_audmux: audmuxgrp { 692 fsl,pins = < 693 /* AUD4 */ 694 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 695 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 696 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 697 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 698 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 699 /* AUD6 */ 700 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 701 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 702 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 703 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 704 >; 705 }; 706 707 pinctrl_ecspi3: escpi3grp { 708 fsl,pins = < 709 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 710 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 711 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 712 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 713 >; 714 }; 715 716 pinctrl_enet: enetgrp { 717 fsl,pins = < 718 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 719 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 720 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 721 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 722 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 723 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 724 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 725 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 726 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 727 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 728 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 729 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 730 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 731 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 732 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 733 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 734 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ 735 >; 736 }; 737 738 pinctrl_flexcan: flexcangrp { 739 fsl,pins = < 740 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 741 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 742 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ 743 >; 744 }; 745 746 pinctrl_gpio_leds: gpioledsgrp { 747 fsl,pins = < 748 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 749 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 750 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 751 >; 752 }; 753 754 pinctrl_i2c1: i2c1grp { 755 fsl,pins = < 756 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 757 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 758 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 759 >; 760 }; 761 762 pinctrl_i2c2: i2c2grp { 763 fsl,pins = < 764 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 765 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 766 >; 767 }; 768 769 pinctrl_i2c3: i2c3grp { 770 fsl,pins = < 771 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 772 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 773 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ 774 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ 775 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ 776 >; 777 }; 778 779 pinctrl_imu: imugrp { 780 fsl,pins = < 781 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 782 >; 783 }; 784 785 pinctrl_keypad: keypadgrp { 786 fsl,pins = < 787 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ 788 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ 789 >; 790 }; 791 792 pinctrl_mag: maggrp { 793 fsl,pins = < 794 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 795 >; 796 }; 797 798 pinctrl_pcie: pciegrp { 799 fsl,pins = < 800 MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ 801 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ 802 >; 803 }; 804 805 pinctrl_pmic: pmicgrp { 806 fsl,pins = < 807 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ 808 >; 809 }; 810 811 pinctrl_pps: ppsgrp { 812 fsl,pins = < 813 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 814 >; 815 }; 816 817 pinctrl_pwm2: pwm2grp { 818 fsl,pins = < 819 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 820 >; 821 }; 822 823 pinctrl_pwm3: pwm3grp { 824 fsl,pins = < 825 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 826 >; 827 }; 828 829 pinctrl_pwm4: pwm4grp { 830 fsl,pins = < 831 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 832 >; 833 }; 834 835 pinctrl_uart1: uart1grp { 836 fsl,pins = < 837 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 838 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 839 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ 840 >; 841 }; 842 843 pinctrl_uart2: uart2grp { 844 fsl,pins = < 845 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 846 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 847 >; 848 }; 849 850 pinctrl_uart5: uart5grp { 851 fsl,pins = < 852 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 853 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 854 >; 855 }; 856 857 pinctrl_usbh1: usbh1grp { 858 fsl,pins = < 859 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ 860 >; 861 }; 862 863 pinctrl_usbotg: usbotggrp { 864 fsl,pins = < 865 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 866 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ 867 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ 868 >; 869 }; 870 871 pinctrl_usdhc2: usdhc2grp { 872 fsl,pins = < 873 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 874 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 875 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 876 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 877 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 878 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 879 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 880 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 881 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 882 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 883 >; 884 }; 885 886 pinctrl_usdhc3: usdhc3grp { 887 fsl,pins = < 888 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 889 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 890 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 891 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 892 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 893 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 894 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 895 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 896 >; 897 }; 898 899 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { 900 fsl,pins = < 901 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 902 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 903 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 904 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 905 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 906 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 907 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 908 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 909 >; 910 }; 911 912 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { 913 fsl,pins = < 914 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 915 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 916 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 917 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 918 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 919 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 920 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 921 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 922 >; 923 }; 924 925 pinctrl_wdog: wdoggrp { 926 fsl,pins = < 927 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 928 >; 929 }; 930}; 931