1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9#include <dt-bindings/sound/fsl-imx-audmux.h> 10 11/ { 12 /* these are used by bootloader for disabling nodes */ 13 aliases { 14 led0 = &led0; 15 led1 = &led1; 16 led2 = &led2; 17 nand = &gpmi; 18 ssi0 = &ssi1; 19 usb0 = &usbh1; 20 usb1 = &usbotg; 21 }; 22 23 chosen { 24 bootargs = "console=ttymxc1,115200"; 25 }; 26 27 backlight { 28 compatible = "pwm-backlight"; 29 pwms = <&pwm4 0 5000000 0>; 30 brightness-levels = <0 4 8 16 32 64 128 255>; 31 default-brightness-level = <7>; 32 }; 33 34 gpio-keys { 35 compatible = "gpio-keys"; 36 37 user-pb { 38 label = "user_pb"; 39 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 40 linux,code = <BTN_0>; 41 }; 42 43 user-pb1x { 44 label = "user_pb1x"; 45 linux,code = <BTN_1>; 46 interrupt-parent = <&gsc>; 47 interrupts = <0>; 48 }; 49 50 key-erased { 51 label = "key-erased"; 52 linux,code = <BTN_2>; 53 interrupt-parent = <&gsc>; 54 interrupts = <1>; 55 }; 56 57 eeprom-wp { 58 label = "eeprom_wp"; 59 linux,code = <BTN_3>; 60 interrupt-parent = <&gsc>; 61 interrupts = <2>; 62 }; 63 64 tamper { 65 label = "tamper"; 66 linux,code = <BTN_4>; 67 interrupt-parent = <&gsc>; 68 interrupts = <5>; 69 }; 70 71 switch-hold { 72 label = "switch_hold"; 73 linux,code = <BTN_5>; 74 interrupt-parent = <&gsc>; 75 interrupts = <7>; 76 }; 77 }; 78 79 leds { 80 compatible = "gpio-leds"; 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pinctrl_gpio_leds>; 83 84 led0: led-user1 { 85 label = "user1"; 86 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 87 default-state = "on"; 88 linux,default-trigger = "heartbeat"; 89 }; 90 91 led1: led-user2 { 92 label = "user2"; 93 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 94 default-state = "off"; 95 }; 96 97 led2: led-user3 { 98 label = "user3"; 99 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 100 default-state = "off"; 101 }; 102 }; 103 104 memory@10000000 { 105 device_type = "memory"; 106 reg = <0x10000000 0x40000000>; 107 }; 108 109 pps { 110 compatible = "pps-gpio"; 111 pinctrl-names = "default"; 112 pinctrl-0 = <&pinctrl_pps>; 113 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 114 status = "okay"; 115 }; 116 117 reg_1p0v: regulator-1p0v { 118 compatible = "regulator-fixed"; 119 regulator-name = "1P0V"; 120 regulator-min-microvolt = <1000000>; 121 regulator-max-microvolt = <1000000>; 122 regulator-always-on; 123 }; 124 125 reg_3p3v: regulator-3p3v { 126 compatible = "regulator-fixed"; 127 regulator-name = "3P3V"; 128 regulator-min-microvolt = <3300000>; 129 regulator-max-microvolt = <3300000>; 130 regulator-always-on; 131 }; 132 133 reg_can1_stby: regulator-can1-stby { 134 compatible = "regulator-fixed"; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pinctrl_reg_can1>; 137 regulator-name = "can1_stby"; 138 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; 139 regulator-min-microvolt = <3300000>; 140 regulator-max-microvolt = <3300000>; 141 }; 142 143 reg_usb_h1_vbus: regulator-usb-h1-vbus { 144 compatible = "regulator-fixed"; 145 regulator-name = "usb_h1_vbus"; 146 regulator-min-microvolt = <5000000>; 147 regulator-max-microvolt = <5000000>; 148 regulator-always-on; 149 }; 150 151 reg_usb_otg_vbus: regulator-usb-otg-vbus { 152 compatible = "regulator-fixed"; 153 regulator-name = "usb_otg_vbus"; 154 regulator-min-microvolt = <5000000>; 155 regulator-max-microvolt = <5000000>; 156 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 157 enable-active-high; 158 }; 159 160 sound-analog { 161 compatible = "fsl,imx6q-ventana-sgtl5000", 162 "fsl,imx-audio-sgtl5000"; 163 model = "sgtl5000-audio"; 164 ssi-controller = <&ssi1>; 165 audio-codec = <&sgtl5000>; 166 audio-routing = 167 "MIC_IN", "Mic Jack", 168 "Mic Jack", "Mic Bias", 169 "Headphone Jack", "HP_OUT"; 170 mux-int-port = <1>; 171 mux-ext-port = <4>; 172 }; 173}; 174 175&audmux { 176 pinctrl-names = "default"; 177 pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ 178 status = "okay"; 179 180 mux-ssi2 { 181 fsl,audmux-port = <1>; 182 fsl,port-config = < 183 (IMX_AUDMUX_V2_PTCR_TFSDIR | 184 IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */ 185 IMX_AUDMUX_V2_PTCR_TCLKDIR | 186 IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */ 187 IMX_AUDMUX_V2_PTCR_SYN) 188 IMX_AUDMUX_V2_PDCR_RXDSEL(4) 189 >; 190 }; 191 192 mux-aud5 { 193 fsl,audmux-port = <4>; 194 fsl,port-config = < 195 IMX_AUDMUX_V2_PTCR_SYN 196 IMX_AUDMUX_V2_PDCR_RXDSEL(1)>; 197 }; 198}; 199 200&can1 { 201 pinctrl-names = "default"; 202 pinctrl-0 = <&pinctrl_flexcan1>; 203 xceiver-supply = <®_can1_stby>; 204 status = "okay"; 205}; 206 207&clks { 208 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 209 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 210 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 211 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 212}; 213 214&ecspi2 { 215 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 216 pinctrl-names = "default"; 217 pinctrl-0 = <&pinctrl_ecspi2>; 218 status = "okay"; 219}; 220 221&fec { 222 pinctrl-names = "default"; 223 pinctrl-0 = <&pinctrl_enet>; 224 phy-mode = "rgmii-id"; 225 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 226 status = "okay"; 227}; 228 229&gpmi { 230 pinctrl-names = "default"; 231 pinctrl-0 = <&pinctrl_gpmi_nand>; 232 status = "okay"; 233}; 234 235&hdmi { 236 ddc-i2c-bus = <&i2c3>; 237 status = "okay"; 238}; 239 240&i2c1 { 241 clock-frequency = <100000>; 242 pinctrl-names = "default"; 243 pinctrl-0 = <&pinctrl_i2c1>; 244 status = "okay"; 245 246 gsc: gsc@20 { 247 compatible = "gw,gsc"; 248 reg = <0x20>; 249 interrupt-parent = <&gpio1>; 250 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 251 interrupt-controller; 252 #interrupt-cells = <1>; 253 #address-cells = <1>; 254 #size-cells = <0>; 255 256 adc { 257 compatible = "gw,gsc-adc"; 258 #address-cells = <1>; 259 #size-cells = <0>; 260 261 channel@0 { 262 gw,mode = <0>; 263 reg = <0x00>; 264 label = "temp"; 265 }; 266 267 channel@2 { 268 gw,mode = <1>; 269 reg = <0x02>; 270 label = "vdd_vin"; 271 }; 272 273 channel@5 { 274 gw,mode = <1>; 275 reg = <0x05>; 276 label = "vdd_3p3"; 277 }; 278 279 channel@8 { 280 gw,mode = <1>; 281 reg = <0x08>; 282 label = "vdd_bat"; 283 }; 284 285 channel@b { 286 gw,mode = <1>; 287 reg = <0x0b>; 288 label = "vdd_5p0"; 289 }; 290 291 channel@e { 292 gw,mode = <1>; 293 reg = <0xe>; 294 label = "vdd_arm"; 295 }; 296 297 channel@11 { 298 gw,mode = <1>; 299 reg = <0x11>; 300 label = "vdd_soc"; 301 }; 302 303 channel@14 { 304 gw,mode = <1>; 305 reg = <0x14>; 306 label = "vdd_3p0"; 307 }; 308 309 channel@17 { 310 gw,mode = <1>; 311 reg = <0x17>; 312 label = "vdd_1p5"; 313 }; 314 315 channel@1d { 316 gw,mode = <1>; 317 reg = <0x1d>; 318 label = "vdd_1p8"; 319 }; 320 321 channel@20 { 322 gw,mode = <1>; 323 reg = <0x20>; 324 label = "vdd_1p0"; 325 }; 326 327 channel@23 { 328 gw,mode = <1>; 329 reg = <0x23>; 330 label = "vdd_2p5"; 331 }; 332 333 channel@26 { 334 gw,mode = <1>; 335 reg = <0x26>; 336 label = "vdd_gps"; 337 }; 338 }; 339 340 fan-controller@2c { 341 compatible = "gw,gsc-fan"; 342 reg = <0x2c>; 343 }; 344 }; 345 346 gsc_gpio: gpio@23 { 347 compatible = "nxp,pca9555"; 348 reg = <0x23>; 349 gpio-controller; 350 #gpio-cells = <2>; 351 interrupt-parent = <&gsc>; 352 interrupts = <4>; 353 }; 354 355 eeprom1: eeprom@50 { 356 compatible = "atmel,24c02"; 357 reg = <0x50>; 358 pagesize = <16>; 359 }; 360 361 eeprom2: eeprom@51 { 362 compatible = "atmel,24c02"; 363 reg = <0x51>; 364 pagesize = <16>; 365 }; 366 367 eeprom3: eeprom@52 { 368 compatible = "atmel,24c02"; 369 reg = <0x52>; 370 pagesize = <16>; 371 }; 372 373 eeprom4: eeprom@53 { 374 compatible = "atmel,24c02"; 375 reg = <0x53>; 376 pagesize = <16>; 377 }; 378 379 rtc: ds1672@68 { 380 compatible = "dallas,ds1672"; 381 reg = <0x68>; 382 }; 383}; 384 385&i2c2 { 386 clock-frequency = <100000>; 387 pinctrl-names = "default"; 388 pinctrl-0 = <&pinctrl_i2c2>; 389 status = "okay"; 390 391 pmic: pmic@8 { 392 compatible = "fsl,pfuze100"; 393 reg = <0x08>; 394 395 regulators { 396 sw1a_reg: sw1ab { 397 regulator-min-microvolt = <300000>; 398 regulator-max-microvolt = <1875000>; 399 regulator-boot-on; 400 regulator-always-on; 401 regulator-ramp-delay = <6250>; 402 }; 403 404 sw1c_reg: sw1c { 405 regulator-min-microvolt = <300000>; 406 regulator-max-microvolt = <1875000>; 407 regulator-boot-on; 408 regulator-always-on; 409 regulator-ramp-delay = <6250>; 410 }; 411 412 sw2_reg: sw2 { 413 regulator-min-microvolt = <800000>; 414 regulator-max-microvolt = <3950000>; 415 regulator-boot-on; 416 regulator-always-on; 417 }; 418 419 sw3a_reg: sw3a { 420 regulator-min-microvolt = <400000>; 421 regulator-max-microvolt = <1975000>; 422 regulator-boot-on; 423 regulator-always-on; 424 }; 425 426 sw3b_reg: sw3b { 427 regulator-min-microvolt = <400000>; 428 regulator-max-microvolt = <1975000>; 429 regulator-boot-on; 430 regulator-always-on; 431 }; 432 433 sw4_reg: sw4 { 434 regulator-min-microvolt = <800000>; 435 regulator-max-microvolt = <3300000>; 436 }; 437 438 swbst_reg: swbst { 439 regulator-min-microvolt = <5000000>; 440 regulator-max-microvolt = <5150000>; 441 regulator-boot-on; 442 regulator-always-on; 443 }; 444 445 snvs_reg: vsnvs { 446 regulator-min-microvolt = <1000000>; 447 regulator-max-microvolt = <3000000>; 448 regulator-boot-on; 449 regulator-always-on; 450 }; 451 452 vref_reg: vrefddr { 453 regulator-boot-on; 454 regulator-always-on; 455 }; 456 457 vgen1_reg: vgen1 { 458 regulator-min-microvolt = <800000>; 459 regulator-max-microvolt = <1550000>; 460 }; 461 462 vgen2_reg: vgen2 { 463 regulator-min-microvolt = <800000>; 464 regulator-max-microvolt = <1550000>; 465 }; 466 467 vgen3_reg: vgen3 { 468 regulator-min-microvolt = <1800000>; 469 regulator-max-microvolt = <3300000>; 470 }; 471 472 vgen4_reg: vgen4 { 473 regulator-min-microvolt = <1800000>; 474 regulator-max-microvolt = <3300000>; 475 regulator-always-on; 476 }; 477 478 vgen5_reg: vgen5 { 479 regulator-min-microvolt = <1800000>; 480 regulator-max-microvolt = <3300000>; 481 regulator-always-on; 482 }; 483 484 vgen6_reg: vgen6 { 485 regulator-min-microvolt = <1800000>; 486 regulator-max-microvolt = <3300000>; 487 regulator-always-on; 488 }; 489 }; 490 }; 491}; 492 493&i2c3 { 494 clock-frequency = <100000>; 495 pinctrl-names = "default"; 496 pinctrl-0 = <&pinctrl_i2c3>; 497 status = "okay"; 498 499 sgtl5000: audio-codec@a { 500 compatible = "fsl,sgtl5000"; 501 reg = <0x0a>; 502 #sound-dai-cells = <0>; 503 clocks = <&clks IMX6QDL_CLK_CKO>; 504 VDDA-supply = <&sw4_reg>; 505 VDDIO-supply = <®_3p3v>; 506 }; 507 508 touchscreen: egalax_ts@4 { 509 compatible = "eeti,egalax_ts"; 510 reg = <0x04>; 511 interrupt-parent = <&gpio7>; 512 interrupts = <12 2>; 513 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; 514 }; 515 516 accel@1e { 517 compatible = "nxp,fxos8700"; 518 reg = <0x1e>; 519 }; 520}; 521 522&ldb { 523 status = "okay"; 524 525 lvds-channel@0 { 526 fsl,data-mapping = "spwg"; 527 fsl,data-width = <18>; 528 status = "okay"; 529 530 display-timings { 531 native-mode = <&timing0>; 532 timing0: timing-hsd100pxn1 { 533 clock-frequency = <65000000>; 534 hactive = <1024>; 535 vactive = <768>; 536 hback-porch = <220>; 537 hfront-porch = <40>; 538 vback-porch = <21>; 539 vfront-porch = <7>; 540 hsync-len = <60>; 541 vsync-len = <10>; 542 }; 543 }; 544 }; 545}; 546 547&pcie { 548 pinctrl-names = "default"; 549 pinctrl-0 = <&pinctrl_pcie>; 550 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; 551 status = "okay"; 552}; 553 554&pwm1 { 555 pinctrl-names = "default"; 556 pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */ 557 status = "disabled"; 558}; 559 560&pwm2 { 561 pinctrl-names = "default"; 562 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 563 status = "disabled"; 564}; 565 566&pwm3 { 567 pinctrl-names = "default"; 568 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 569 status = "disabled"; 570}; 571 572&pwm4 { 573 pinctrl-names = "default", "state_dio"; 574 pinctrl-0 = <&pinctrl_pwm4_backlight>; 575 pinctrl-1 = <&pinctrl_pwm4_dio>; 576 status = "okay"; 577}; 578 579&ssi1 { 580 status = "okay"; 581}; 582 583&ssi2 { 584 status = "okay"; 585}; 586 587&uart1 { 588 pinctrl-names = "default"; 589 pinctrl-0 = <&pinctrl_uart1>; 590 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 591 status = "okay"; 592}; 593 594&uart2 { 595 pinctrl-names = "default"; 596 pinctrl-0 = <&pinctrl_uart2>; 597 status = "okay"; 598}; 599 600&uart5 { 601 pinctrl-names = "default"; 602 pinctrl-0 = <&pinctrl_uart5>; 603 status = "okay"; 604}; 605 606&usbotg { 607 vbus-supply = <®_usb_otg_vbus>; 608 pinctrl-names = "default"; 609 pinctrl-0 = <&pinctrl_usbotg>; 610 disable-over-current; 611 status = "okay"; 612}; 613 614&usbh1 { 615 vbus-supply = <®_usb_h1_vbus>; 616 status = "okay"; 617}; 618 619&usdhc3 { 620 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 621 pinctrl-0 = <&pinctrl_usdhc3>; 622 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 623 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 624 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 625 vmmc-supply = <®_3p3v>; 626 no-1-8-v; /* firmware will remove if board revision supports */ 627 status = "okay"; 628}; 629 630&wdog1 { 631 status = "disabled"; 632}; 633 634&wdog2 { 635 pinctrl-names = "default"; 636 pinctrl-0 = <&pinctrl_wdog>; 637 fsl,ext-reset-output; 638 status = "okay"; 639}; 640 641&iomuxc { 642 pinctrl_audmux: audmuxgrp { 643 fsl,pins = < 644 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 645 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 646 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 647 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 648 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 649 MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0 650 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 651 MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0 652 >; 653 }; 654 655 pinctrl_enet: enetgrp { 656 fsl,pins = < 657 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 658 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 659 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 660 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 661 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 662 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 663 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 664 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 665 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 666 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 667 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 668 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 669 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 670 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 671 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 672 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 673 >; 674 }; 675 676 pinctrl_ecspi2: escpi2grp { 677 fsl,pins = < 678 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 679 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 680 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 681 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 682 >; 683 }; 684 685 pinctrl_flexcan1: flexcan1grp { 686 fsl,pins = < 687 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 688 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 689 >; 690 }; 691 692 pinctrl_gpio_leds: gpioledsgrp { 693 fsl,pins = < 694 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 695 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 696 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 697 >; 698 }; 699 700 pinctrl_gpmi_nand: gpminandgrp { 701 fsl,pins = < 702 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 703 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 704 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 705 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 706 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 707 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 708 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 709 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 710 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 711 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 712 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 713 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 714 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 715 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 716 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 717 >; 718 }; 719 720 pinctrl_i2c1: i2c1grp { 721 fsl,pins = < 722 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 723 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 724 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 725 >; 726 }; 727 728 pinctrl_i2c2: i2c2grp { 729 fsl,pins = < 730 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 731 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 732 >; 733 }; 734 735 pinctrl_i2c3: i2c3grp { 736 fsl,pins = < 737 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 738 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 739 >; 740 }; 741 742 pinctrl_pcie: pciegrp { 743 fsl,pins = < 744 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ 745 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ 746 >; 747 }; 748 749 pinctrl_pps: ppsgrp { 750 fsl,pins = < 751 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 752 >; 753 }; 754 755 pinctrl_pwm1: pwm1grp { 756 fsl,pins = < 757 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 758 >; 759 }; 760 761 pinctrl_pwm2: pwm2grp { 762 fsl,pins = < 763 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 764 >; 765 }; 766 767 pinctrl_pwm3: pwm3grp { 768 fsl,pins = < 769 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 770 >; 771 }; 772 773 pinctrl_pwm4_backlight: pwm4backlightgrp { 774 fsl,pins = < 775 /* LVDS_PWM J6.5 */ 776 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 777 >; 778 }; 779 780 pinctrl_pwm4_dio: pwm4diogrp { 781 fsl,pins = < 782 /* DIO3 J16.4 */ 783 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 784 >; 785 }; 786 787 pinctrl_reg_can1: regcan1grp { 788 fsl,pins = < 789 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ 790 >; 791 }; 792 793 pinctrl_uart1: uart1grp { 794 fsl,pins = < 795 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 796 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 797 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ 798 >; 799 }; 800 801 pinctrl_uart2: uart2grp { 802 fsl,pins = < 803 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 804 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 805 >; 806 }; 807 808 pinctrl_uart5: uart5grp { 809 fsl,pins = < 810 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 811 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 812 >; 813 }; 814 815 pinctrl_usbotg: usbotggrp { 816 fsl,pins = < 817 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 818 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ 819 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059 820 >; 821 }; 822 823 pinctrl_usdhc3: usdhc3grp { 824 fsl,pins = < 825 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 826 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 827 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 828 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 829 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 830 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 831 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 832 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 833 >; 834 }; 835 836 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { 837 fsl,pins = < 838 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 839 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 840 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 841 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 842 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 843 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 844 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 845 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 846 >; 847 }; 848 849 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { 850 fsl,pins = < 851 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 852 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 853 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 854 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 855 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 856 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 857 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 858 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 859 >; 860 }; 861 862 pinctrl_wdog: wdoggrp { 863 fsl,pins = < 864 MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 865 >; 866 }; 867}; 868