1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2// 3// Copyright (C) 2018 emtrion GmbH 4// 5 6/ { 7 aliases { 8 boardid = &boardid; 9 mmc0 = &usdhc3; 10 mmc1 = &usdhc2; 11 mmc2 = &usdhc1; 12 mmc3 = &usdhc4; 13 }; 14 15 reg_wall_5p0: reg-wall5p0 { 16 compatible = "regulator-fixed"; 17 regulator-name = "Main-Supply"; 18 regulator-min-microvolt = <5000000>; 19 regulator-max-microvolt = <5000000>; 20 regulator-always-on; 21 regulator-boot-on; 22 }; 23 24 reg_base3p3: reg-base3p3 { 25 compatible = "regulator-fixed"; 26 vin-supply = <®_wall_5p0>; 27 regulator-name = "3V3-avari"; 28 regulator-min-microvolt = <3300000>; 29 regulator-max-microvolt = <3300000>; 30 regulator-always-on; 31 regulator-boot-on; 32 }; 33 34 reg_base1p5: reg-base1p5 { 35 compatible = "regulator-fixed"; 36 vin-supply = <®_base3p3>; 37 regulator-name = "1V5-avari"; 38 regulator-min-microvolt = <1500000>; 39 regulator-max-microvolt = <1500000>; 40 regulator-always-on; 41 regulator-boot-on; 42 }; 43 44 reg_usb_otg: reg-otgvbus { 45 compatible = "regulator-fixed"; 46 vin-supply = <®_wall_5p0>; 47 regulator-name = "OTG_VBUS"; 48 regulator-min-microvolt = <5000000>; 49 regulator-max-microvolt = <5000000>; 50 gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; 51 regulator-always-on; 52 }; 53 54 clk_codec: clock-codec { 55 compatible = "fixed-clock"; 56 #clock-cells = <0>; 57 clock-frequency = <12000000>; 58 }; 59 60 sound { 61 compatible = "fsl,imx-audio-sgtl5000"; 62 model = "emCON-avari-sgtl5000"; 63 ssi-controller = <&ssi2>; 64 audio-codec = <&sgtl5000>; 65 audio-routing = 66 "Headphone Jack", "HP_OUT"; 67 mux-int-port = <2>; 68 mux-ext-port = <3>; 69 }; 70}; 71 72&audmux { 73 pinctrl-names = "default"; 74 pinctrl-0 = <&pinctrl_audmux>; 75 status = "okay"; 76}; 77 78&can1 { 79 status = "okay"; 80}; 81 82&can2 { 83 status = "okay"; 84}; 85 86&ecspi2 { 87 status = "okay"; 88}; 89 90&hdmi { 91 ddc-i2c-bus = <&i2c2>; 92 status = "okay"; 93}; 94 95&i2c2 { 96 status = "okay"; 97}; 98 99&i2c3 { 100 clock-frequency = <100000>; 101 pinctrl-names = "default"; 102 pinctrl-0 = <&pinctrl_i2c3>; 103 status = "okay"; 104 105 sgtl5000: audio-codec@a { 106 compatible = "fsl,sgtl5000"; 107 reg = <0x0a>; 108 #sound-dai-cells = <0>; 109 clocks = <&clk_codec>; 110 VDDA-supply = <®_base3p3>; 111 VDDIO-supply = <®_base3p3>; 112 }; 113 114 captouch: touchscreen@38 { 115 compatible = "edt,edt-ft5406"; 116 reg = <0x38>; 117 pinctrl-names = "default"; 118 pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; 119 interrupt-parent = <&gpio6>; 120 interrupts = <31 IRQ_TYPE_EDGE_FALLING>; 121 wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; 122 wakeup-source; 123 }; 124 125 boardid: gpio@3a { 126 compatible = "nxp,pca8574"; 127 reg = <0x3a>; 128 gpio-controller; 129 #gpio-cells = <2>; 130 }; 131}; 132 133&pcie { 134 status = "okay"; 135}; 136 137&rgb_encoder { 138 status = "okay"; 139}; 140 141&rgb_panel { 142 compatible = "edt,etm0700g0bdh6"; 143 status = "okay"; 144}; 145 146&ssi2 { 147 status = "okay"; 148}; 149 150&uart2 { 151 status = "okay"; 152 uart-has-rtscts; 153}; 154 155&uart3 { 156 status = "okay"; 157}; 158 159&uart4 { 160 status = "okay"; 161}; 162 163&uart5 { 164 status = "okay"; 165}; 166 167&usbh1 { 168 status = "okay"; 169}; 170 171&usbotg { 172 status = "okay"; 173}; 174 175&usdhc1 { 176 status = "okay"; 177}; 178