1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2021 Dillon Min <dillon.minfei@gmail.com> 4// 5// Based on imx6qdl-sabresd.dtsi which is: 6// Copyright 2012 Freescale Semiconductor, Inc. 7// Copyright 2011 Linaro Ltd. 8 9#include <dt-bindings/clock/imx6qdl-clock.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/input/input.h> 12 13/ { 14 chosen { 15 stdout-path = &uart4; 16 }; 17 18 memory@10000000 { 19 device_type = "memory"; 20 reg = <0x10000000 0x80000000>; 21 }; 22 23 reg_usb_otg_vbus: regulator-usb-otg-vbus { 24 compatible = "regulator-fixed"; 25 regulator-name = "usb_otg_vbus"; 26 regulator-min-microvolt = <5000000>; 27 regulator-max-microvolt = <5000000>; 28 }; 29 30 reg_usb_h1_vbus: regulator-usb-h1-vbus { 31 compatible = "regulator-fixed"; 32 regulator-name = "usb_h1_vbus"; 33 regulator-min-microvolt = <5000000>; 34 regulator-max-microvolt = <5000000>; 35 }; 36 37 leds { 38 compatible = "gpio-leds"; 39 pinctrl-names = "default"; 40 pinctrl-0 = <&pinctrl_gpio_leds>; 41 42 led-0 { 43 gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; 44 default-state = "on"; 45 linux,default-trigger = "heartbeat"; 46 }; 47 }; 48}; 49 50&ipu1_csi0_from_ipu1_csi0_mux { 51 bus-width = <8>; 52 data-shift = <12>; /* Lines 19:12 used */ 53 hsync-active = <1>; 54 vsync-active = <1>; 55}; 56 57&ipu1_csi0_mux_from_parallel_sensor { 58 remote-endpoint = <&ov2659_to_ipu1_csi0_mux>; 59}; 60 61&ipu1_csi0 { 62 pinctrl-names = "default"; 63 pinctrl-0 = <&pinctrl_ipu1_csi0>; 64 status = "okay"; 65}; 66 67&ecspi1 { 68 cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; 69 pinctrl-names = "default"; 70 pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>; 71 status = "okay"; 72 73 m25p80: flash@0 { 74 #address-cells = <1>; 75 #size-cells = <1>; 76 compatible = "st,m25p80", "jedec,spi-nor"; 77 spi-max-frequency = <20000000>; 78 reg = <0>; 79 }; 80}; 81 82&fec { 83 pinctrl-names = "default"; 84 pinctrl-0 = <&pinctrl_enet>; 85 phy-mode = "rgmii-id"; 86 phy-handle = <&phy>; 87 fsl,magic-packet; 88 status = "okay"; 89 90 mdio { 91 #address-cells = <1>; 92 #size-cells = <0>; 93 94 phy: ethernet-phy@1 { 95 reg = <1>; 96 qca,clk-out-frequency = <125000000>; 97 reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; 98 reset-assert-us = <10000>; 99 }; 100 }; 101}; 102 103&hdmi { 104 pinctrl-names = "default"; 105 pinctrl-0 = <&pinctrl_hdmi_cec>; 106 ddc-i2c-bus = <&i2c3>; 107 status = "okay"; 108}; 109 110&i2c2 { 111 clock-frequency = <100000>; 112 pinctrl-names = "default"; 113 pinctrl-0 = <&pinctrl_i2c2>; 114 status = "okay"; 115 116 pfuze100: pmic@8 { 117 compatible = "fsl,pfuze100"; 118 reg = <0x08>; 119 120 regulators { 121 sw1a_reg: sw1ab { 122 regulator-min-microvolt = <300000>; 123 regulator-max-microvolt = <1875000>; 124 regulator-boot-on; 125 regulator-always-on; 126 regulator-ramp-delay = <6250>; 127 }; 128 129 sw1c_reg: sw1c { 130 regulator-min-microvolt = <300000>; 131 regulator-max-microvolt = <1875000>; 132 regulator-boot-on; 133 regulator-always-on; 134 regulator-ramp-delay = <6250>; 135 }; 136 137 sw2_reg: sw2 { 138 regulator-min-microvolt = <800000>; 139 regulator-max-microvolt = <3300000>; 140 regulator-boot-on; 141 regulator-always-on; 142 regulator-ramp-delay = <6250>; 143 }; 144 145 sw3a_reg: sw3a { 146 regulator-min-microvolt = <400000>; 147 regulator-max-microvolt = <1975000>; 148 regulator-boot-on; 149 regulator-always-on; 150 }; 151 152 sw3b_reg: sw3b { 153 regulator-min-microvolt = <400000>; 154 regulator-max-microvolt = <1975000>; 155 regulator-boot-on; 156 regulator-always-on; 157 }; 158 159 sw4_reg: sw4 { 160 regulator-min-microvolt = <800000>; 161 regulator-max-microvolt = <3300000>; 162 regulator-always-on; 163 }; 164 165 swbst_reg: swbst { 166 regulator-min-microvolt = <5000000>; 167 regulator-max-microvolt = <5150000>; 168 }; 169 170 snvs_reg: vsnvs { 171 regulator-min-microvolt = <1000000>; 172 regulator-max-microvolt = <3000000>; 173 regulator-boot-on; 174 regulator-always-on; 175 }; 176 177 vref_reg: vrefddr { 178 regulator-boot-on; 179 regulator-always-on; 180 }; 181 182 vgen1_reg: vgen1 { 183 regulator-min-microvolt = <800000>; 184 regulator-max-microvolt = <1550000>; 185 }; 186 187 vgen2_reg: vgen2 { 188 regulator-min-microvolt = <800000>; 189 regulator-max-microvolt = <1550000>; 190 }; 191 192 vgen3_reg: vgen3 { 193 regulator-min-microvolt = <1800000>; 194 regulator-max-microvolt = <3300000>; 195 }; 196 197 vgen4_reg: vgen4 { 198 regulator-min-microvolt = <1800000>; 199 regulator-max-microvolt = <3300000>; 200 regulator-always-on; 201 }; 202 203 vgen5_reg: vgen5 { 204 regulator-min-microvolt = <1800000>; 205 regulator-max-microvolt = <3300000>; 206 regulator-always-on; 207 }; 208 209 vgen6_reg: vgen6 { 210 regulator-min-microvolt = <1800000>; 211 regulator-max-microvolt = <3300000>; 212 regulator-always-on; 213 }; 214 }; 215 }; 216}; 217 218&i2c3 { 219 clock-frequency = <100000>; 220 pinctrl-names = "default"; 221 pinctrl-0 = <&pinctrl_i2c3>; 222 status = "okay"; 223 224 ov2659: camera@30 { 225 compatible = "ovti,ov2659"; 226 pinctrl-names = "default"; 227 pinctrl-0 = <&pinctrl_ov2659>; 228 clocks = <&clks IMX6QDL_CLK_CKO>; 229 clock-names = "xvclk"; 230 reg = <0x30>; 231 powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; 232 reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; 233 status = "okay"; 234 235 port { 236 ov2659_to_ipu1_csi0_mux: endpoint { 237 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; 238 link-frequencies = /bits/ 64 <70000000>; 239 bus-width = <8>; 240 hsync-active = <1>; 241 vsync-active = <1>; 242 }; 243 }; 244 }; 245}; 246 247&iomuxc { 248 pinctrl_ecspi1: ecspi1grp { 249 fsl,pins = < 250 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 251 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 252 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 253 >; 254 }; 255 256 pinctrl_ecspi1_gpio: ecspi1gpiogrp { 257 fsl,pins = < 258 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 259 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 260 >; 261 }; 262 263 pinctrl_enet: enetgrp { 264 fsl,pins = < 265 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 266 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 267 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 268 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 269 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 270 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 271 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 272 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 273 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 274 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 275 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 276 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 277 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 278 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 279 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 280 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 281 >; 282 }; 283 284 pinctrl_hdmi_cec: hdmicecgrp { 285 fsl,pins = < 286 MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 287 >; 288 }; 289 290 pinctrl_i2c2: i2c2grp { 291 fsl,pins = < 292 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 293 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 294 >; 295 }; 296 297 pinctrl_i2c3: i2c3grp { 298 fsl,pins = < 299 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 300 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 301 >; 302 }; 303 304 pinctrl_ipu1_csi0: ipu1csi0grp { 305 fsl,pins = < 306 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 307 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 308 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 309 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 310 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 311 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 312 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 313 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 314 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 315 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 316 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 317 >; 318 }; 319 320 pinctrl_ov2659: ov2659grp { 321 fsl,pins = < 322 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 323 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 324 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 325 >; 326 }; 327 328 pinctrl_uart4: uart4grp { 329 fsl,pins = < 330 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 331 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 332 >; 333 }; 334 335 pinctrl_usbotg: usbotggrp { 336 fsl,pins = < 337 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 338 >; 339 }; 340 341 pinctrl_usdhc1: usdhc1grp { 342 fsl,pins = < 343 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 344 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 345 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 346 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 347 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 348 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 349 >; 350 }; 351 352 pinctrl_usdhc1_gpio: usdhc1gpiogrp { 353 fsl,pins = < 354 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 355 >; 356 }; 357 358 pinctrl_usdhc2: usdhc2grp { 359 fsl,pins = < 360 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 361 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 362 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 363 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 364 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 365 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 366 >; 367 }; 368 369 pinctrl_usdhc2_gpio: usdhc2gpiogrp { 370 fsl,pins = < 371 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 372 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 373 >; 374 }; 375 376 pinctrl_usdhc3: usdhc3grp { 377 fsl,pins = < 378 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 379 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 380 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 381 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 382 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 383 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 384 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 385 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 386 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 387 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 388 >; 389 }; 390 391 pinctrl_wdog: wdoggrp { 392 fsl,pins = < 393 MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 394 >; 395 }; 396 397 pinctrl_gpio_leds: gpioledsgrp { 398 fsl,pins = < 399 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 400 >; 401 }; 402}; 403 404&uart4 { 405 pinctrl-names = "default"; 406 pinctrl-0 = <&pinctrl_uart4>; 407 status = "okay"; 408}; 409 410&usbh1 { 411 vbus-supply = <®_usb_h1_vbus>; 412 status = "okay"; 413}; 414 415&usbotg { 416 vbus-supply = <®_usb_otg_vbus>; 417 pinctrl-names = "default"; 418 pinctrl-0 = <&pinctrl_usbotg>; 419 disable-over-current; 420 status = "okay"; 421}; 422 423&usdhc1 { 424 pinctrl-names = "default"; 425 pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; 426 bus-width = <4>; 427 cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; 428 status = "okay"; 429}; 430 431&usdhc2 { 432 pinctrl-names = "default"; 433 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; 434 bus-width = <4>; 435 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; 436 wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; 437 status = "disabled"; 438}; 439 440&usdhc3 { 441 pinctrl-names = "default"; 442 pinctrl-0 = <&pinctrl_usdhc3>; 443 bus-width = <8>; 444 non-removable; 445 no-1-8-v; 446 status = "okay"; 447}; 448 449&wdog1 { 450 status = "disabled"; 451}; 452 453&wdog2 { 454 pinctrl-names = "default"; 455 pinctrl-0 = <&pinctrl_wdog>; 456 fsl,ext-reset-output; 457 status = "okay"; 458}; 459