1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright 2013 Pavel Machek <pavel@denx.de> 4 */ 5 6/dts-v1/; 7#include "imx6q.dtsi" 8 9/ { 10 model = "MicroSys sbc6x board"; 11 compatible = "microsys,sbc6x", "fsl,imx6q"; 12 13 memory@10000000 { 14 device_type = "memory"; 15 reg = <0x10000000 0x80000000>; 16 }; 17}; 18 19 20&fec { 21 pinctrl-names = "default"; 22 pinctrl-0 = <&pinctrl_enet>; 23 phy-mode = "rgmii"; 24 status = "okay"; 25}; 26 27&iomuxc { 28 imx6q-sbc6x { 29 pinctrl_enet: enetgrp { 30 fsl,pins = < 31 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 32 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 33 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 34 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 35 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 36 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 37 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 38 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 39 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 40 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 41 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 42 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 43 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 44 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 45 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 46 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 47 >; 48 }; 49 50 pinctrl_uart1: uart1grp { 51 fsl,pins = < 52 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 53 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 54 >; 55 }; 56 57 pinctrl_usbotg: usbotggrp { 58 fsl,pins = < 59 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 60 >; 61 }; 62 63 pinctrl_usdhc3: usdhc3grp { 64 fsl,pins = < 65 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 66 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 67 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 68 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 69 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 70 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 71 >; 72 }; 73 }; 74}; 75 76&uart1 { 77 pinctrl-names = "default"; 78 pinctrl-0 = <&pinctrl_uart1>; 79 status = "okay"; 80}; 81 82&usbotg { 83 pinctrl-names = "default"; 84 pinctrl-0 = <&pinctrl_usbotg>; 85 disable-over-current; 86 status = "okay"; 87}; 88 89&usdhc3 { 90 pinctrl-names = "default"; 91 pinctrl-0 = <&pinctrl_usdhc3>; 92 status = "okay"; 93}; 94