xref: /linux/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1/*
2 * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License
11 *     version 2 as published by the Free Software Foundation.
12 *
13 *     This file is distributed in the hope that it will be useful,
14 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
15 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 *     GNU General Public License for more details.
17 *
18 * Or, alternatively,
19 *
20 *  b) Permission is hereby granted, free of charge, to any person
21 *     obtaining a copy of this software and associated documentation
22 *     files (the "Software"), to deal in the Software without
23 *     restriction, including without limitation the rights to use,
24 *     copy, modify, merge, publish, distribute, sublicense, and/or
25 *     sell copies of the Software, and to permit persons to whom the
26 *     Software is furnished to do so, subject to the following
27 *     conditions:
28 *
29 *     The above copyright notice and this permission notice shall be
30 *     included in all copies or substantial portions of the Software.
31 *
32 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 *     OTHER DEALINGS IN THE SOFTWARE.
40 */
41
42/dts-v1/;
43
44#include "imx6q.dtsi"
45#include "imx6qdl-sr-som.dtsi"
46#include "imx6qdl-sr-som-brcm.dtsi"
47
48/ {
49	model = "Auvidea H100";
50	compatible = "auvidea,h100", "fsl,imx6q";
51
52	/* Will be filled by the bootloader */
53	memory@10000000 {
54		device_type = "memory";
55		reg = <0x10000000 0>;
56	};
57
58	aliases {
59		rtc0 = &rtc;
60		rtc1 = &snvs_rtc;
61	};
62
63	chosen {
64		stdout-path = &uart2;
65	};
66
67	hdmi_osc: hdmi-osc {
68		compatible = "fixed-clock";
69		clock-output-names = "hdmi-osc";
70		clock-frequency = <27000000>;
71		#clock-cells = <0>;
72	};
73
74	leds {
75		compatible = "gpio-leds";
76		pinctrl-names = "default";
77		pinctrl-0 = <&pinctrl_h100_leds>;
78
79		led0: led-power {
80			label = "power";
81			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
82			default-state = "on";
83		};
84
85		led1: led-stream {
86			label = "stream";
87			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
88			default-state = "off";
89		};
90
91		led2: led-rec {
92			label = "rec";
93			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
94			default-state = "off";
95		};
96	};
97
98	reg_3p3v: regulator-3p3v {
99		compatible = "regulator-fixed";
100		regulator-name = "3P3V";
101		regulator-min-microvolt = <3300000>;
102		regulator-max-microvolt = <3300000>;
103	};
104
105	reg_hdmi: regulator-hdmi {
106		pinctrl-names = "default";
107		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
108		compatible = "regulator-fixed";
109		enable-active-high;
110		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
111		regulator-name = "V_HDMI";
112		regulator-min-microvolt = <5000000>;
113		regulator-max-microvolt = <5000000>;
114		regulator-always-on;
115	};
116
117	reg_usbh1_vbus: regulator-usb-h1-vbus {
118		compatible = "regulator-fixed";
119		enable-active-high;
120		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
121		pinctrl-names = "default";
122		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
123		regulator-name = "USB_H1_VBUS";
124		regulator-min-microvolt = <5000000>;
125		regulator-max-microvolt = <5000000>;
126	};
127
128	reg_usbotg_vbus: regulator-usb-otg-vbus {
129		compatible = "regulator-fixed";
130		enable-active-high;
131		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
132		pinctrl-names = "default";
133		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
134		regulator-name = "USB_OTG_VBUS";
135		regulator-min-microvolt = <5000000>;
136		regulator-max-microvolt = <5000000>;
137	};
138
139	sound-sgtl5000 {
140		compatible = "fsl,imx-audio-sgtl5000";
141		model = "H100 on-board codec";
142		audio-codec = <&sgtl5000>;
143		audio-routing =
144			"MIC_IN", "Mic Jack",
145			"Mic Jack", "Mic Bias",
146			"Headphone Jack", "HP_OUT";
147		mux-ext-port = <5>;
148		mux-int-port = <1>;
149		ssi-controller = <&ssi1>;
150	};
151};
152
153&audmux {
154	status = "okay";
155};
156
157&hdmi {
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_h100_hdmi>;
160	ddc-i2c-bus = <&i2c2>;
161	status = "okay";
162};
163
164&i2c1 {
165	pinctrl-names = "default";
166	pinctrl-0 = <&pinctrl_h100_i2c1>;
167	status = "okay";
168
169	eeprom: eeprom@51 {
170		compatible = "microchip,24c02", "atmel,24c02";
171		reg = <0x51>;
172	};
173
174	rtc: pcf8523@68 {
175		compatible = "nxp,pcf8523";
176		reg = <0x68>;
177	};
178
179	sgtl5000: sgtl5000@a {
180		compatible = "fsl,sgtl5000";
181		reg = <0x0a>;
182		#sound-dai-cells = <0>;
183		pinctrl-names = "default";
184		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
185		clocks = <&clks IMX6QDL_CLK_CKO>;
186		VDDA-supply = <&reg_3p3v>;
187		VDDIO-supply = <&reg_3p3v>;
188	};
189
190	tc358743: tc358743@f {
191		compatible = "toshiba,tc358743";
192		reg = <0x0f>;
193		pinctrl-names = "default";
194		pinctrl-0 = <&pinctrl_h100_tc358743>;
195		clocks = <&hdmi_osc>;
196		clock-names = "refclk";
197		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
198		/* IRQ has a wrong pull resistor which renders it useless  */
199
200		port {
201			tc358743_out: endpoint {
202				remote-endpoint = <&mipi_csi2_in>;
203				data-lanes = <1 2 3 4>;
204				clock-lanes = <0>;
205				clock-noncontinuous;
206				link-frequencies = /bits/ 64 <297000000>;
207			};
208		};
209	};
210};
211
212&i2c2 {
213	clock-frequency = <100000>;
214	pinctrl-names = "default";
215	pinctrl-0 = <&pinctrl_h100_i2c2>;
216	status = "okay";
217};
218
219&iomuxc {
220	h100 {
221		pinctrl_h100_hdmi: h100-hdmi {
222			fsl,pins = <
223				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
224			>;
225		};
226
227		pinctrl_h100_i2c1: h100-i2c1 {
228			fsl,pins = <
229				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
230				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
231			>;
232		};
233
234		pinctrl_h100_i2c2: h100-i2c2 {
235			fsl,pins = <
236				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
237				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
238			>;
239		};
240
241		pinctrl_h100_leds: pinctrl-h100-leds {
242			fsl,pins = <
243				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
244				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
245				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
246			>;
247		};
248
249		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
250			fsl,pins = <
251				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
252			>;
253		};
254
255		pinctrl_h100_sgtl5000: h100-sgtl5000 {
256			fsl,pins = <
257				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
258				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
259				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
260				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
261				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
262			>;
263		};
264
265		pinctrl_h100_tc358743: h100-tc358743 {
266			fsl,pins = <
267				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
268			>;
269		};
270
271		pinctrl_h100_uart2: h100-uart2 {
272			fsl,pins = <
273				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
274				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
275			>;
276		};
277
278		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
279			fsl,pins = <
280				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
281			>;
282		};
283
284		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
285			fsl,pins = <
286				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
287			>;
288		};
289
290		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
291			fsl,pins = <
292				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
293			>;
294		};
295
296		pinctrl_h100_usdhc2: h100-usdhc2 {
297			fsl,pins = <
298				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
299				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
300				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
301				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
302				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
303				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
304				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
305				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
306			>;
307		};
308
309		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
310			fsl,pins = <
311				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
312				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
313				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
314				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
315				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
316				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
317				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
318				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
319			>;
320		};
321
322		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
323			fsl,pins = <
324				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
325				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
326				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
327				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
328				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
329				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
330				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
331				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
332			>;
333		};
334	};
335};
336
337&mipi_csi {
338	status = "okay";
339
340	port {
341		mipi_csi2_in: endpoint {
342			remote-endpoint = <&tc358743_out>;
343			data-lanes = <1 2 3 4>;
344			clock-lanes = <0>;
345			clock-noncontinuous;
346			link-frequencies = /bits/ 64 <297000000>;
347		};
348	};
349};
350
351&ssi1 {
352	status = "okay";
353};
354
355&uart2 {
356	pinctrl-names = "default";
357	pinctrl-0 = <&pinctrl_h100_uart2>;
358	status = "okay";
359};
360
361&usbh1 {
362	disable-over-current;
363	vbus-supply = <&reg_usbh1_vbus>;
364	status = "okay";
365};
366
367&usbotg {
368	disable-over-current;
369	pinctrl-names = "default";
370	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
371	vbus-supply = <&reg_usbotg_vbus>;
372	status = "okay";
373};
374
375&usdhc2 {
376	pinctrl-names = "default", "state_100mhz", "state_200mhz";
377	pinctrl-0 = <&pinctrl_h100_usdhc2>;
378	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
379	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
380	vmmc-supply = <&reg_3p3v>;
381	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
382	status = "okay";
383};
384