1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Gateworks Corporation 4 */ 5 6/dts-v1/; 7#include <dt-bindings/gpio/gpio.h> 8#include "imx6q.dtsi" 9 10/ { 11 model = "Gateworks Ventana GW5400-A"; 12 compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q"; 13 14 /* these are used by bootloader for disabling nodes */ 15 aliases { 16 i2c0 = &i2c1; 17 i2c1 = &i2c2; 18 i2c2 = &i2c3; 19 led0 = &led0; 20 led1 = &led1; 21 led2 = &led2; 22 ssi0 = &ssi1; 23 spi0 = &ecspi1; 24 usb0 = &usbh1; 25 usb1 = &usbotg; 26 }; 27 28 chosen { 29 bootargs = "console=ttymxc1,115200"; 30 }; 31 32 leds { 33 compatible = "gpio-leds"; 34 pinctrl-names = "default"; 35 pinctrl-0 = <&pinctrl_gpio_leds>; 36 37 led0: led-user1 { 38 label = "user1"; 39 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ 40 default-state = "on"; 41 linux,default-trigger = "heartbeat"; 42 }; 43 44 led1: led-user2 { 45 label = "user2"; 46 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ 47 default-state = "off"; 48 }; 49 50 led2: led-user3 { 51 label = "user3"; 52 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ 53 default-state = "off"; 54 }; 55 }; 56 57 memory@10000000 { 58 device_type = "memory"; 59 reg = <0x10000000 0x40000000>; 60 }; 61 62 pps { 63 compatible = "pps-gpio"; 64 pinctrl-names = "default"; 65 pinctrl-0 = <&pinctrl_gpio_leds>; 66 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; 67 status = "okay"; 68 }; 69 70 regulators { 71 compatible = "simple-bus"; 72 #address-cells = <1>; 73 #size-cells = <0>; 74 75 reg_1p0v: regulator@0 { 76 compatible = "regulator-fixed"; 77 reg = <0>; 78 regulator-name = "1P0V"; 79 regulator-min-microvolt = <1000000>; 80 regulator-max-microvolt = <1000000>; 81 regulator-always-on; 82 }; 83 84 reg_3p3v: regulator@1 { 85 compatible = "regulator-fixed"; 86 reg = <1>; 87 regulator-name = "3P3V"; 88 regulator-min-microvolt = <3300000>; 89 regulator-max-microvolt = <3300000>; 90 regulator-always-on; 91 }; 92 93 reg_usb_h1_vbus: regulator@2 { 94 compatible = "regulator-fixed"; 95 reg = <2>; 96 regulator-name = "usb_h1_vbus"; 97 regulator-min-microvolt = <5000000>; 98 regulator-max-microvolt = <5000000>; 99 regulator-always-on; 100 }; 101 102 reg_usb_otg_vbus: regulator@3 { 103 compatible = "regulator-fixed"; 104 reg = <3>; 105 regulator-name = "usb_otg_vbus"; 106 regulator-min-microvolt = <5000000>; 107 regulator-max-microvolt = <5000000>; 108 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 109 enable-active-high; 110 }; 111 }; 112 113 sound { 114 compatible = "fsl,imx6q-ventana-sgtl5000", 115 "fsl,imx-audio-sgtl5000"; 116 model = "sgtl5000-audio"; 117 ssi-controller = <&ssi1>; 118 audio-codec = <&codec>; 119 audio-routing = 120 "MIC_IN", "Mic Jack", 121 "Mic Jack", "Mic Bias", 122 "Headphone Jack", "HP_OUT"; 123 mux-int-port = <1>; 124 mux-ext-port = <4>; 125 }; 126}; 127 128&audmux { 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_audmux>; 131 status = "okay"; 132}; 133 134&ecspi1 { 135 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 136 pinctrl-names = "default"; 137 pinctrl-0 = <&pinctrl_ecspi1>; 138 status = "okay"; 139 140 flash: flash@0 { 141 compatible = "sst,w25q256", "jedec,spi-nor"; 142 spi-max-frequency = <30000000>; 143 reg = <0>; 144 }; 145}; 146 147&fec { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_enet>; 150 phy-mode = "rgmii-id"; 151 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 152 status = "okay"; 153}; 154 155&hdmi { 156 ddc-i2c-bus = <&i2c3>; 157 status = "okay"; 158}; 159 160&i2c1 { 161 clock-frequency = <100000>; 162 pinctrl-names = "default"; 163 pinctrl-0 = <&pinctrl_i2c1>; 164 status = "okay"; 165 166 eeprom1: eeprom@50 { 167 compatible = "atmel,24c02"; 168 reg = <0x50>; 169 pagesize = <16>; 170 }; 171 172 eeprom2: eeprom@51 { 173 compatible = "atmel,24c02"; 174 reg = <0x51>; 175 pagesize = <16>; 176 }; 177 178 eeprom3: eeprom@52 { 179 compatible = "atmel,24c02"; 180 reg = <0x52>; 181 pagesize = <16>; 182 }; 183 184 eeprom4: eeprom@53 { 185 compatible = "atmel,24c02"; 186 reg = <0x53>; 187 pagesize = <16>; 188 }; 189 190 gpio: pca9555@23 { 191 compatible = "nxp,pca9555"; 192 reg = <0x23>; 193 gpio-controller; 194 #gpio-cells = <2>; 195 }; 196 197 rtc: ds1672@68 { 198 compatible = "dallas,ds1672"; 199 reg = <0x68>; 200 }; 201}; 202 203&i2c2 { 204 clock-frequency = <100000>; 205 pinctrl-names = "default"; 206 pinctrl-0 = <&pinctrl_i2c2>; 207 status = "okay"; 208 209 pmic: pmic@8 { 210 compatible = "fsl,pfuze100"; 211 reg = <0x08>; 212 213 regulators { 214 sw1a_reg: sw1ab { 215 regulator-min-microvolt = <300000>; 216 regulator-max-microvolt = <1875000>; 217 regulator-boot-on; 218 regulator-always-on; 219 regulator-ramp-delay = <6250>; 220 }; 221 222 sw1c_reg: sw1c { 223 regulator-min-microvolt = <300000>; 224 regulator-max-microvolt = <1875000>; 225 regulator-boot-on; 226 regulator-always-on; 227 regulator-ramp-delay = <6250>; 228 }; 229 230 sw2_reg: sw2 { 231 regulator-min-microvolt = <800000>; 232 regulator-max-microvolt = <3950000>; 233 regulator-boot-on; 234 regulator-always-on; 235 }; 236 237 sw3a_reg: sw3a { 238 regulator-min-microvolt = <400000>; 239 regulator-max-microvolt = <1975000>; 240 regulator-boot-on; 241 regulator-always-on; 242 }; 243 244 sw3b_reg: sw3b { 245 regulator-min-microvolt = <400000>; 246 regulator-max-microvolt = <1975000>; 247 regulator-boot-on; 248 regulator-always-on; 249 }; 250 251 sw4_reg: sw4 { 252 regulator-min-microvolt = <800000>; 253 regulator-max-microvolt = <3300000>; 254 }; 255 256 swbst_reg: swbst { 257 regulator-min-microvolt = <5000000>; 258 regulator-max-microvolt = <5150000>; 259 }; 260 261 snvs_reg: vsnvs { 262 regulator-min-microvolt = <1000000>; 263 regulator-max-microvolt = <3000000>; 264 regulator-boot-on; 265 regulator-always-on; 266 }; 267 268 vref_reg: vrefddr { 269 regulator-boot-on; 270 regulator-always-on; 271 }; 272 273 vgen1_reg: vgen1 { 274 regulator-min-microvolt = <800000>; 275 regulator-max-microvolt = <1550000>; 276 }; 277 278 vgen2_reg: vgen2 { 279 regulator-min-microvolt = <800000>; 280 regulator-max-microvolt = <1550000>; 281 }; 282 283 vgen3_reg: vgen3 { 284 regulator-min-microvolt = <1800000>; 285 regulator-max-microvolt = <3300000>; 286 }; 287 288 vgen4_reg: vgen4 { 289 regulator-min-microvolt = <1800000>; 290 regulator-max-microvolt = <3300000>; 291 regulator-always-on; 292 }; 293 294 vgen5_reg: vgen5 { 295 regulator-min-microvolt = <1800000>; 296 regulator-max-microvolt = <3300000>; 297 regulator-always-on; 298 }; 299 300 vgen6_reg: vgen6 { 301 regulator-min-microvolt = <1800000>; 302 regulator-max-microvolt = <3300000>; 303 regulator-always-on; 304 }; 305 }; 306 }; 307}; 308 309&i2c3 { 310 clock-frequency = <100000>; 311 pinctrl-names = "default"; 312 pinctrl-0 = <&pinctrl_i2c3>; 313 status = "okay"; 314 315 accelerometer: mma8450@1c { 316 compatible = "fsl,mma8450"; 317 reg = <0x1c>; 318 }; 319 320 codec: sgtl5000@a { 321 compatible = "fsl,sgtl5000"; 322 reg = <0x0a>; 323 clocks = <&clks IMX6QDL_CLK_CKO>; 324 VDDA-supply = <&sw4_reg>; 325 VDDIO-supply = <®_3p3v>; 326 }; 327 328 touchscreen: egalax_ts@4 { 329 compatible = "eeti,egalax_ts"; 330 reg = <0x04>; 331 interrupt-parent = <&gpio7>; 332 interrupts = <12 2>; 333 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; 334 }; 335}; 336 337&ldb { 338 status = "okay"; 339}; 340 341&pcie { 342 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; 343 status = "okay"; 344}; 345 346&ssi1 { 347 status = "okay"; 348}; 349 350&uart1 { 351 pinctrl-names = "default"; 352 pinctrl-0 = <&pinctrl_uart1>; 353 status = "okay"; 354}; 355 356&uart2 { 357 pinctrl-names = "default"; 358 pinctrl-0 = <&pinctrl_uart2>; 359 status = "okay"; 360}; 361 362&uart5 { 363 pinctrl-names = "default"; 364 pinctrl-0 = <&pinctrl_uart5>; 365 status = "okay"; 366}; 367 368&usbotg { 369 vbus-supply = <®_usb_otg_vbus>; 370 pinctrl-names = "default"; 371 pinctrl-0 = <&pinctrl_usbotg>; 372 disable-over-current; 373 status = "okay"; 374}; 375 376&usbh1 { 377 vbus-supply = <®_usb_h1_vbus>; 378 status = "okay"; 379}; 380 381&usdhc3 { 382 pinctrl-names = "default"; 383 pinctrl-0 = <&pinctrl_usdhc3>; 384 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 385 vmmc-supply = <®_3p3v>; 386 status = "okay"; 387}; 388 389&iomuxc { 390 pinctrl_audmux: audmuxgrp { 391 fsl,pins = < 392 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 393 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 394 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 395 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 396 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 397 >; 398 }; 399 400 pinctrl_ecspi1: ecspi1grp { 401 fsl,pins = < 402 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 403 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 404 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 405 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ 406 >; 407 }; 408 409 pinctrl_enet: enetgrp { 410 fsl,pins = < 411 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 412 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 413 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 414 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 415 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 416 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 417 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 418 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 419 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 420 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 421 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 422 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 423 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 424 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 425 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 426 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 427 >; 428 }; 429 430 pinctrl_gpio_leds: gpioledsgrp { 431 fsl,pins = < 432 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ 433 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ 434 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ 435 >; 436 }; 437 438 pinctrl_i2c1: i2c1grp { 439 fsl,pins = < 440 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 441 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 442 >; 443 }; 444 445 pinctrl_i2c2: i2c2grp { 446 fsl,pins = < 447 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 448 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 449 >; 450 }; 451 452 pinctrl_i2c3: i2c3grp { 453 fsl,pins = < 454 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 455 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 456 >; 457 }; 458 459 pinctrl_pcie: pciegrp { 460 fsl,pins = < 461 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ 462 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ 463 >; 464 }; 465 466 pinctrl_pps: ppsgrp { 467 fsl,pins = < 468 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ 469 >; 470 }; 471 472 pinctrl_uart1: uart1grp { 473 fsl,pins = < 474 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 475 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 476 >; 477 }; 478 479 pinctrl_uart2: uart2grp { 480 fsl,pins = < 481 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 482 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 483 >; 484 }; 485 486 pinctrl_uart5: uart5grp { 487 fsl,pins = < 488 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 489 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 490 >; 491 }; 492 493 pinctrl_usbotg: usbotggrp { 494 fsl,pins = < 495 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 496 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ 497 >; 498 }; 499 500 pinctrl_usdhc3: usdhc3grp { 501 fsl,pins = < 502 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 503 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 504 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 505 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 506 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 507 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 508 >; 509 }; 510}; 511