xref: /linux/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi (revision e7d759f31ca295d589f7420719c311870bb3166f) 
1/*
2 * Copyright 2015 Timesys Corporation.
3 * Copyright 2015 General Electric Company
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License
12 *     version 2 as published by the Free Software Foundation.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include "imx6q-ba16.dtsi"
44
45/ {
46	mclk: clock-mclk {
47		compatible = "fixed-clock";
48		#clock-cells = <0>;
49		clock-frequency = <22000000>;
50	};
51
52	gpio-poweroff {
53		compatible = "gpio-poweroff";
54		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
55		status = "okay";
56	};
57
58	reg_wl18xx_vmmc: regulator-wl18xx {
59		compatible = "regulator-fixed";
60		regulator-name = "vwl1807";
61		regulator-min-microvolt = <3300000>;
62		regulator-max-microvolt = <3300000>;
63		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
64		startup-delay-us = <70000>;
65		enable-active-high;
66	};
67
68	reg_wlan: regulator-wlan {
69		compatible = "regulator-fixed";
70		regulator-name = "3P3V_wlan";
71		regulator-min-microvolt = <3300000>;
72		regulator-max-microvolt = <3300000>;
73		regulator-always-on;
74		regulator-boot-on;
75		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
76	};
77
78	sound {
79		compatible = "fsl,imx6q-ba16-sgtl5000",
80			     "fsl,imx-audio-sgtl5000";
81		model = "imx6q-ba16-sgtl5000";
82		ssi-controller = <&ssi1>;
83		audio-codec = <&sgtl5000>;
84		audio-routing =
85			"MIC_IN", "Mic Jack",
86			"Mic Jack", "Mic Bias",
87			"LINE_IN", "Line In Jack",
88			"Headphone Jack", "HP_OUT";
89		mux-int-port = <1>;
90		mux-ext-port = <4>;
91	};
92
93	aliases {
94		mdio-gpio0 = &mdio0;
95	};
96
97	mdio0: mdio-gpio {
98		compatible = "virtual,mdio-gpio";
99		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
100			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
101
102		#address-cells = <1>;
103		#size-cells = <0>;
104
105		switch: switch@0 {
106			compatible = "marvell,mv88e6085"; /* 88e6240*/
107			reg = <0>;
108
109			interrupt-parent = <&gpio2>;
110			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
111			interrupt-controller;
112			#interrupt-cells = <2>;
113
114			switch_ports: ports {
115				#address-cells = <1>;
116				#size-cells = <0>;
117			};
118
119			mdio {
120				#address-cells = <1>;
121				#size-cells = <0>;
122
123				switchphy0: switchphy@0 {
124					reg = <0>;
125					interrupt-parent = <&switch>;
126					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
127				};
128
129				switchphy1: switchphy@1 {
130					reg = <1>;
131					interrupt-parent = <&switch>;
132					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
133				};
134
135				switchphy2: switchphy@2 {
136					reg = <2>;
137					interrupt-parent = <&switch>;
138					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
139				};
140
141				switchphy3: switchphy@3 {
142					reg = <3>;
143					interrupt-parent = <&switch>;
144					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
145				};
146
147				switchphy4: switchphy@4 {
148					reg = <4>;
149					interrupt-parent = <&switch>;
150					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
151				};
152			};
153		};
154	};
155};
156
157&ecspi5 {
158	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
159	pinctrl-names = "default";
160	pinctrl-0 = <&pinctrl_ecspi5>;
161	status = "okay";
162
163	m25_eeprom: flash@0 {
164		compatible = "atmel,at25";
165		spi-max-frequency = <10000000>;
166		size = <0x8000>;
167		pagesize = <64>;
168		reg = <0>;
169		address-width = <16>;
170	};
171};
172
173&i2c1 {
174	pinctrl-names = "default", "gpio";
175	pinctrl-1 = <&pinctrl_i2c1_gpio>;
176	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
177	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
178
179	pca9547: mux@70 {
180		compatible = "nxp,pca9547";
181		reg = <0x70>;
182		#address-cells = <1>;
183		#size-cells = <0>;
184
185		mux1_i2c1: i2c@0 {
186			#address-cells = <1>;
187			#size-cells = <0>;
188			reg = <0x0>;
189
190			ads7830: ads7830@48 {
191				compatible = "ti,ads7830";
192				reg = <0x48>;
193			};
194
195			mma8453: mma8453@1c {
196				compatible = "fsl,mma8453";
197				reg = <0x1c>;
198			};
199		};
200
201		mux1_i2c2: i2c@1 {
202			#address-cells = <1>;
203			#size-cells = <0>;
204			reg = <0x1>;
205
206			eeprom: eeprom@50 {
207				compatible = "atmel,24c08";
208				reg = <0x50>;
209			};
210
211			mpl3115: mpl3115@60 {
212				compatible = "fsl,mpl3115";
213				reg = <0x60>;
214			};
215		};
216
217		mux1_i2c3: i2c@2 {
218			#address-cells = <1>;
219			#size-cells = <0>;
220			reg = <0x2>;
221		};
222
223		mux1_i2c4: i2c@3 {
224			#address-cells = <1>;
225			#size-cells = <0>;
226			reg = <0x3>;
227
228			sgtl5000: codec@a {
229				compatible = "fsl,sgtl5000";
230				reg = <0x0a>;
231				#sound-dai-cells = <0>;
232				clocks = <&mclk>;
233				VDDA-supply = <&reg_1p8v>;
234				VDDIO-supply = <&reg_3p3v>;
235			};
236		};
237
238		mux1_i2c5: i2c@4 {
239			#address-cells = <1>;
240			#size-cells = <0>;
241			reg = <0x4>;
242
243			pca9539: pca9539@74 {
244				compatible = "nxp,pca9539";
245				reg = <0x74>;
246				gpio-controller;
247				#gpio-cells = <2>;
248				interrupt-controller;
249				interrupt-parent = <&gpio2>;
250				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
251
252				P12-hog {
253					gpio-hog;
254					gpios = <10 0>;
255					output-low;
256					line-name = "PCA9539-P12";
257				};
258
259				P13-hog {
260					gpio-hog;
261					gpios = <11 0>;
262					output-low;
263					line-name = "PCA9539-P13";
264				};
265
266				P14-hog {
267					gpio-hog;
268					gpios = <12 0>;
269					output-low;
270					line-name = "PCA9539-P14";
271				};
272
273				P15-hog {
274					gpio-hog;
275					gpios = <13 0>;
276					output-low;
277					line-name = "PCA9539-P15";
278				};
279
280				P16-hog {
281					gpio-hog;
282					gpios = <14 0>;
283					output-low;
284					line-name = "PCA9539-P16";
285				};
286
287				P17-hog {
288					gpio-hog;
289					gpios = <15 0>;
290					output-low;
291					line-name = "PCA9539-P17";
292				};
293			};
294		};
295
296		mux1_i2c6: i2c@5 {
297			#address-cells = <1>;
298			#size-cells = <0>;
299			reg = <0x5>;
300		};
301
302		mux1_i2c7: i2c@6 {
303			#address-cells = <1>;
304			#size-cells = <0>;
305			reg = <0x6>;
306		};
307
308		mux1_i2c8: i2c@7 {
309			#address-cells = <1>;
310			#size-cells = <0>;
311			reg = <0x7>;
312		};
313	};
314};
315
316&i2c2 {
317	pinctrl-names = "default", "gpio";
318	pinctrl-1 = <&pinctrl_i2c2_gpio>;
319	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321};
322
323&i2c3 {
324	pinctrl-names = "default", "gpio";
325	pinctrl-1 = <&pinctrl_i2c3_gpio>;
326	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
327	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328};
329
330&iomuxc {
331	pinctrl_i2c1_gpio: i2c1gpiogrp {
332		fsl,pins = <
333			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
334			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
335		>;
336	};
337
338	pinctrl_i2c2_gpio: i2c2gpiogrp {
339		fsl,pins = <
340			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
341			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
342		>;
343	};
344
345	pinctrl_i2c3_gpio: i2c3gpiogrp {
346		fsl,pins = <
347			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
348			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
349		>;
350	};
351};
352
353&pmu {
354	secure-reg-access;
355};
356
357&usdhc2 {
358	status = "disabled";
359};
360
361&usdhc4 {
362	pinctrl-names = "default";
363	pinctrl-0 = <&pinctrl_usdhc4>;
364	bus-width = <4>;
365	vmmc-supply = <&reg_wl18xx_vmmc>;
366	no-1-8-v;
367	non-removable;
368	wakeup-source;
369	keep-power-in-suspend;
370	cap-power-off-card;
371	max-frequency = <25000000>;
372	#address-cells = <1>;
373	#size-cells = <0>;
374	status = "okay";
375
376	wlcore: wlcore@2 {
377		compatible = "ti,wl1837";
378		reg = <2>;
379		interrupt-parent = <&gpio2>;
380		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
381		tcxo-clock-frequency = <26000000>;
382	};
383};
384
385&pcie {
386	/* Synopsys, Inc. Device */
387	pci_root: root@0,0 {
388		compatible = "pci16c3,abcd";
389		reg = <0x00000000 0 0 0 0>;
390
391		#address-cells = <3>;
392		#size-cells = <2>;
393		#interrupt-cells = <1>;
394	};
395};
396
397&clks {
398	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
399			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
400			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
401			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
402			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
403			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
404	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
405				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
406				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
407				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
408				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
409				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
410};
411