xref: /linux/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi (revision 57390019b68b83f96eb98f490367b9df1f2d77cb)
1// SPDX-License-Identifier: GPL-2.0 OR MIT
2//
3// Device Tree Source for i.MX6DL based congatec QMX6
4// System on Module
5//
6// Copyright 2018-2021 General Electric Company
7// Copyright 2018-2021 Collabora
8// Copyright 2016 congatec AG
9
10#include "imx6dl.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/sound/fsl-imx-audmux.h>
13
14/ {
15	memory@10000000 {
16		reg = <0x10000000 0x40000000>;
17	};
18
19	reg_3p3v: 3p3v {
20		compatible = "regulator-fixed";
21		regulator-name = "3P3V";
22		regulator-min-microvolt = <3300000>;
23		regulator-max-microvolt = <3300000>;
24	};
25
26	i2cmux {
27		compatible = "i2c-mux-gpio";
28		#address-cells = <1>;
29		#size-cells = <0>;
30		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
31		i2c-parent = <&i2c2>;
32
33		i2c5: i2c@0 {
34			reg = <0>;
35			#address-cells = <1>;
36			#size-cells = <0>;
37		};
38
39		i2c6: i2c@1 {
40			reg = <1>;
41			#address-cells = <1>;
42			#size-cells = <0>;
43		};
44	};
45};
46
47&audmux {
48	pinctrl-names = "default";
49	pinctrl-0 = <&pinctrl_audmux>;
50
51	mux-ssi1 {
52		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
53		fsl,port-config = <
54			(IMX_AUDMUX_V2_PTCR_TFSDIR |
55			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
56			IMX_AUDMUX_V2_PTCR_TCLKDIR |
57			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
58			IMX_AUDMUX_V2_PTCR_SYN)
59			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
60		>;
61	};
62
63	mux-aud6 {
64		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
65		fsl,port-config = <
66			IMX_AUDMUX_V2_PTCR_SYN
67			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
68		>;
69	};
70};
71
72&clks {
73	clocks = <&rtc_sqw>;
74	clock-names = "ckil";
75	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
76			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
77	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
78				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
79};
80
81&ecspi1 {
82	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
83	pinctrl-names = "default";
84	pinctrl-0 = <&pinctrl_spi1>;
85	status = "okay";
86
87	flash@0 {
88		#address-cells = <1>;
89		#size-cells = <1>;
90		compatible = "sst,sst25vf032b", "jedec,spi-nor";
91		spi-max-frequency = <20000000>;
92		reg = <0>;
93
94		partition@0 {
95			label = "bootloader";
96			reg = <0x0000000 0x100000>;
97		};
98
99		partition@100000 {
100			label = "user";
101			reg = <0x0100000 0x2fc000>;
102		};
103
104		partition@3fc000 {
105			label = "reserved";
106			reg = <0x03fc000 0x4000>;
107			read-only;
108		};
109	};
110};
111
112&fec {
113	pinctrl-names = "default";
114	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
115	phy-mode = "rgmii-id";
116	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
117	fsl,magic-packet;
118	phy-handle = <&phy0>;
119
120	mdio {
121		#address-cells = <1>;
122		#size-cells = <0>;
123
124		phy0: ethernet-phy@6 {
125			reg = <6>;
126			qca,clk-out-frequency = <125000000>;
127		};
128	};
129};
130
131&i2c1 {
132	clock-frequency = <100000>;
133	pinctrl-names = "default", "gpio";
134	pinctrl-0 = <&pinctrl_i2c1>;
135	pinctrl-1 = <&pinctrl_i2c1_gpio>;
136	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
137	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
138	status = "okay";
139};
140
141&i2c2 {
142	clock-frequency = <100000>;
143	pinctrl-names = "default", "gpio";
144	pinctrl-0 = <&pinctrl_i2c2>;
145	pinctrl-1 = <&pinctrl_i2c2_gpio>;
146	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
147	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
148	status = "okay";
149};
150
151&i2c3 {
152	clock-frequency = <100000>;
153	pinctrl-names = "default", "gpio";
154	pinctrl-0 = <&pinctrl_i2c3>;
155	pinctrl-1 = <&pinctrl_i2c3_gpio>;
156	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
157	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
158	status = "okay";
159
160	rtc: m41t62@68 {
161		compatible = "st,m41t62";
162		reg = <0x68>;
163
164		rtc_sqw: clock {
165			compatible = "fixed-clock";
166			#clock-cells = <0>;
167			clock-frequency = <32768>;
168		};
169	};
170};
171
172&i2c6 {
173	pmic@8 {
174		compatible = "fsl,pfuze100";
175		reg = <0x08>;
176
177		regulators {
178			sw1a_reg: sw1ab {
179				regulator-min-microvolt = <300000>;
180				regulator-max-microvolt = <1875000>;
181				regulator-boot-on;
182				regulator-always-on;
183				regulator-ramp-delay = <6250>;
184			};
185
186			sw1c_reg: sw1c {
187				regulator-min-microvolt = <300000>;
188				regulator-max-microvolt = <1875000>;
189				regulator-boot-on;
190				regulator-always-on;
191				regulator-ramp-delay = <6250>;
192			};
193
194			sw2_reg: sw2 {
195				regulator-min-microvolt = <800000>;
196				regulator-max-microvolt = <3300000>;
197				regulator-boot-on;
198				regulator-always-on;
199			};
200
201			sw3a_reg: sw3a {
202				regulator-min-microvolt = <400000>;
203				regulator-max-microvolt = <1975000>;
204				regulator-boot-on;
205				regulator-always-on;
206			};
207
208			sw3b_reg: sw3b {
209				regulator-min-microvolt = <400000>;
210				regulator-max-microvolt = <1975000>;
211				regulator-boot-on;
212				regulator-always-on;
213			};
214
215			sw4_reg: sw4 {
216				regulator-min-microvolt = <675000>;
217				regulator-max-microvolt = <3300000>;
218				regulator-boot-on;
219				regulator-always-on;
220			};
221
222			swbst_reg: swbst {
223				regulator-min-microvolt = <5000000>;
224				regulator-max-microvolt = <5150000>;
225			};
226
227			snvs_reg: vsnvs {
228				regulator-min-microvolt = <1000000>;
229				regulator-max-microvolt = <3000000>;
230				regulator-boot-on;
231				regulator-always-on;
232			};
233
234			vref_reg: vrefddr {
235				regulator-boot-on;
236				regulator-always-on;
237			};
238
239			/*
240			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
241			 * maintain backward compatibility with hw-rev. A.0
242			 */
243			vgen3_reg: vgen3 {
244				regulator-min-microvolt = <1800000>;
245				regulator-max-microvolt = <3300000>;
246				regulator-always-on;
247			};
248
249			vgen4_reg: vgen4 {
250				regulator-min-microvolt = <2500000>;
251				regulator-max-microvolt = <2500000>;
252				regulator-always-on;
253			};
254
255			vgen5_reg: vgen5 {
256				regulator-min-microvolt = <1800000>;
257				regulator-max-microvolt = <3300000>;
258				regulator-always-on;
259			};
260
261			/* supply voltage for eMMC */
262			vgen6_reg: vgen6 {
263				regulator-min-microvolt = <1800000>;
264				regulator-max-microvolt = <1800000>;
265				regulator-boot-on;
266				regulator-always-on;
267			};
268		};
269	};
270};
271
272&pcie {
273	reset-gpio = <&gpio1 20 0>;
274};
275
276&pwm4 {
277	pinctrl-names = "default";
278	pinctrl-0 = <&pinctrl_pwm4>;
279};
280
281&reg_arm {
282	vin-supply = <&sw1a_reg>;
283};
284
285&reg_pu {
286	vin-supply = <&sw1c_reg>;
287};
288
289&reg_soc {
290	vin-supply = <&sw1c_reg>;
291};
292
293&snvs_poweroff {
294	status = "okay";
295};
296
297&uart2 {
298	pinctrl-names = "default";
299	pinctrl-0 = <&pinctrl_uart2>;
300	status = "okay";
301};
302
303&uart3 {
304	pinctrl-names = "default";
305	pinctrl-0 = <&pinctrl_uart3>;
306	status = "okay";
307};
308
309&usbh1 {
310	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
311	vbus-supply = <&reg_5v>;
312	status = "okay";
313};
314
315&usbotg {
316	pinctrl-names = "default";
317	pinctrl-0 = <&pinctrl_usbotg>;
318};
319
320&usdhc2 {
321	/* MicroSD card slot */
322	pinctrl-names = "default";
323	pinctrl-0 = <&pinctrl_usdhc2>;
324	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
325	no-1-8-v;
326	keep-power-in-suspend;
327	wakeup-source;
328	vmmc-supply = <&reg_3p3v>;
329	status = "okay";
330};
331
332&usdhc3 {
333	/* eMMC module */
334	pinctrl-names = "default";
335	pinctrl-0 = <&pinctrl_usdhc3>;
336	non-removable;
337	bus-width = <8>;
338	no-1-8-v;
339	keep-power-in-suspend;
340	wakeup-source;
341	vmmc-supply = <&reg_3p3v>;
342	status = "okay";
343};
344
345&wdog1 {
346	pinctrl-names = "default";
347	pinctrl-0 = <&pinctrl_wdog>;
348	fsl,ext-reset-output;
349};
350
351&iomuxc {
352	pinctrl-names = "default";
353	pinctrl-0 = <&pinctrl_hog>;
354
355	qmx6mux: imx6qdl-qmx6 {
356		pinctrl_audmux: audmuxgrp {
357			fsl,pins = <
358				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
359				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
360				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
361				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
362			>;
363		};
364
365		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
366		pinctrl_enet: enet {
367			fsl,pins = <
368				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
369				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
370				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
371				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
372				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
373				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
374				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
375				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
376				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
377				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
378				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
379				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
380				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
381				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
382				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
383				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
384			>;
385		};
386
387		pinctrl_hog: hoggrp {
388			fsl,pins = <
389				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
390				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
391				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
392				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
393				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
394			>;
395		};
396
397		pinctrl_i2c1: i2c1 {
398			fsl,pins = <
399				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
400				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
401			>;
402		};
403
404		pinctrl_i2c1_gpio: i2c1-gpio {
405			fsl,pins = <
406				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
407				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
408			>;
409		};
410
411		pinctrl_i2c2: i2c2 {
412			fsl,pins = <
413				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
414				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
415			>;
416		};
417
418		pinctrl_i2c2_gpio: i2c2-gpio {
419			fsl,pins = <
420				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
421				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
422			>;
423		};
424
425		pinctrl_i2c3: i2c3 {
426			fsl,pins = <
427				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
428				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
429			>;
430		};
431
432		pinctrl_i2c3_gpio: i2c3-gpio {
433			fsl,pins = <
434				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
435				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
436			>;
437		};
438
439		pinctrl_phy_reset: phy-reset {
440			fsl,pins = <
441				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
442			>;
443		};
444
445		pinctrl_pwm4: pwm4 {
446			fsl,pins = <
447				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
448			>;
449		};
450
451		pinctrl_q7_backlight_enable: q7-backlight-enable {
452			fsl,pins = <
453				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
454			>;
455		};
456
457		pinctrl_q7_gpio0: q7-gpio0 {
458			fsl,pins = <
459				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
460			>;
461		};
462
463		pinctrl_q7_gpio1: q7-gpio1 {
464			fsl,pins = <
465				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
466			>;
467		};
468
469		pinctrl_q7_gpio2: q7-gpio2 {
470			fsl,pins = <
471				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
472			>;
473		};
474
475		pinctrl_q7_gpio3: q7-gpio3 {
476			fsl,pins = <
477				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
478			>;
479		};
480
481		pinctrl_q7_gpio4: q7-gpio4 {
482			fsl,pins = <
483				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
484			>;
485		};
486
487		pinctrl_q7_gpio5: q7-gpio5 {
488			fsl,pins = <
489				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
490			>;
491		};
492
493		pinctrl_q7_gpio6: q7-gpio6 {
494			fsl,pins = <
495				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
496			>;
497		};
498
499		pinctrl_q7_gpio7: q7-gpio7 {
500			fsl,pins = <
501				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
502			>;
503		};
504
505		pinctrl_q7_hda_reset: q7-hda-reset {
506			fsl,pins = <
507				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
508			>;
509		};
510
511		pinctrl_q7_lcd_power: lcd-power {
512			fsl,pins = <
513				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
514			>;
515		};
516
517		pinctrl_q7_sdio_power: q7-sdio-power {
518			fsl,pins = <
519				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
520			>;
521		};
522
523		pinctrl_q7_sleep_button: q7-sleep-button {
524			fsl,pins = <
525				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
526			>;
527		};
528
529		pinctrl_q7_spi_cs1: spi-cs1 {
530			fsl,pins = <
531				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
532			>;
533		};
534
535		/* SPI1 bus does not leave System on Module */
536		pinctrl_spi1: spi1 {
537			fsl,pins = <
538				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
539				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
540				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
541				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
542			>;
543		};
544
545		/* Debug connector on Q7 module */
546		pinctrl_uart2: uart2 {
547			fsl,pins = <
548				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
549				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
550			>;
551		};
552
553		pinctrl_uart3: uart3 {
554			fsl,pins = <
555				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
556				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
557			>;
558		};
559
560		pinctrl_usbotg: usbotg {
561			fsl,pins = <
562				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
563			>;
564		};
565
566		/* µSD card slot on Q7 module */
567		pinctrl_usdhc2: usdhc2 {
568			fsl,pins = <
569				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
570				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
571				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
572				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
573				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
574				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
575				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
576			>;
577		};
578
579		/* eMMC module on Q7 module */
580		pinctrl_usdhc3: usdhc3 {
581			fsl,pins = <
582				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
583				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
584				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
585				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
586				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
587				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
588				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
589				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
590				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
591				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
592			>;
593		};
594
595		pinctrl_usdhc4: usdhc4 {
596			fsl,pins = <
597				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
598				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
599				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
600				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
601				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
602				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
603			>;
604		};
605
606		pinctrl_wdog: wdog {
607			fsl,pins = <
608				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
609			>;
610		};
611	};
612};
613