1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2016 Eckelmann AG. 4 * Copyright (C) 2013 Freescale Semiconductor, Inc. 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/gpio/gpio.h> 10 11#include "imx6dl.dtsi" 12 13/ { 14 model = "Eckelmann CI 4X10 Board"; 15 compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; 16 17 chosen { 18 stdout-path = &uart3; 19 }; 20 21 memory@10000000 { 22 device_type = "memory"; 23 reg = <0x10000000 0x40000000>; 24 }; 25 26 rmii_clk: clock-rmii { 27 /* This clock is provided by the phy (KSZ8091RNB) */ 28 compatible = "fixed-clock"; 29 #clock-cells = <0>; 30 clock-frequency = <50000000>; 31 clock-output-names = "enet_ref_pad"; 32 }; 33 34 reg_usb_h1_vbus: regulator-usb-h1-vbus { 35 pinctrl-names = "default"; 36 pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; 37 compatible = "regulator-fixed"; 38 regulator-name = "usb_h1_vbus"; 39 regulator-min-microvolt = <5000000>; 40 regulator-max-microvolt = <5000000>; 41 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 42 enable-active-high; 43 }; 44 45 siox { 46 compatible = "eckelmann,siox-gpio"; 47 pinctrl-names = "default"; 48 pinctrl-0 = <&pinctrl_siox>; 49 din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; 50 dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; 51 dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; 52 dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; 53 }; 54}; 55 56&can1 { 57 pinctrl-names = "default"; 58 pinctrl-0 = <&pinctrl_flexcan1>; 59 status = "okay"; 60}; 61 62&can2 { 63 pinctrl-names = "default"; 64 pinctrl-0 = <&pinctrl_flexcan2>; 65 status = "okay"; 66}; 67 68&clks { 69 clocks = <&rmii_clk>; 70 clock-names = "enet_ref_pad"; 71 assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; 72 assigned-clock-parents = <&rmii_clk>; 73}; 74 75&ecspi2 { 76 pinctrl-names = "default"; 77 pinctrl-0 = <&pinctrl_ecspi2>; 78 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; 79 status = "okay"; 80 81 flash@0 { 82 compatible = "everspin,mr25h256"; 83 reg = <0>; 84 spi-max-frequency = <15000000>; 85 }; 86}; 87 88&ecspi1 { 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_ecspi1>; 91 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; 92 status = "okay"; 93 94 tpm@0 { 95 compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; 96 reg = <0>; 97 spi-max-frequency = <10000000>; 98 }; 99}; 100 101&gpio2 { 102 gpio-line-names = "buzzer", "", "", "", "", "", "", "", 103 "", "", "", "", "", "", "", "", 104 "", "", "", "", "", "", "", "", 105 "", "", "", "", "", "", "", ""; 106}; 107 108&gpio4 { 109 gpio-line-names = "", "", "", "", "", "", "", "in2", 110 "prio2", "prio1", "aux", "", "", "", "", "", 111 "", "", "", "", "", "", "", "", 112 "", "", "", "", "", "", "", ""; 113}; 114 115&gpio6 { 116 gpio-line-names = "", "", "", "", "", "", "", "", 117 "", "", "", "", "", "", "", "in1", 118 "", "", "", "", "", "", "", "", 119 "", "", "", "", "", "", "", ""; 120}; 121 122&i2c1 { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&pinctrl_i2c1>; 125 status = "okay"; 126 127 temperature-sensor@49 { 128 compatible = "ad,ad7414"; 129 reg = <0x49>; 130 }; 131 132 rtc@51 { 133 compatible = "nxp,pcf2127"; 134 reg = <0x51>; 135 }; 136}; 137 138&iomuxc { 139 pinctrl-names = "default"; 140 pinctrl-0 = <&pinctrl_hog>; 141 142 pinctrl_hog: hog { 143 fsl,pins = < 144 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ 145 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ 146 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ 147 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ 148 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ 149 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ 150 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ 151 MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ 152 153 >; 154 }; 155 156 pinctrl_ecspi1: ecspi1grp { 157 fsl,pins = < 158 MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 159 MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 160 MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 161 MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 162 >; 163 }; 164 165 pinctrl_ecspi2: ecspi2grp { 166 fsl,pins = < 167 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 168 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 169 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 170 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 171 >; 172 }; 173 174 pinctrl_enet: enetgrp { 175 fsl,pins = < 176 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 177 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 178 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 179 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 180 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 181 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 182 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 183 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 184 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 185 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 186 MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 187 >; 188 }; 189 190 pinctrl_flexcan1: flexcan1grp { 191 fsl,pins = < 192 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 193 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 194 >; 195 }; 196 197 pinctrl_flexcan2: flexcan2grp { 198 fsl,pins = < 199 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 200 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 201 >; 202 }; 203 204 pinctrl_i2c1: i2c1grp { 205 fsl,pins = < 206 /* without SION i2c doesn't detect bus busy */ 207 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 208 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 209 >; 210 }; 211 212 pinctrl_pcie: pciegrp { 213 fsl,pins = < 214 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 215 >; 216 }; 217 218 pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { 219 fsl,pins = < 220 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 221 >; 222 }; 223 224 pinctrl_siox: sioxgrp { 225 fsl,pins = < 226 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ 227 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ 228 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ 229 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ 230 >; 231 }; 232 233 pinctrl_uart1_dte: uart1grp { 234 fsl,pins = < 235 MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 236 MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 237 MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 238 MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 239 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ 240 MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ 241 MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ 242 >; 243 }; 244 245 pinctrl_uart2_dte: uart2grp { 246 fsl,pins = < 247 MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 248 MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 249 MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 250 MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 251 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ 252 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ 253 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ 254 >; 255 }; 256 257 pinctrl_uart3_dce: uart3grp { 258 fsl,pins = < 259 MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 260 MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 261 >; 262 }; 263 264 pinctrl_uart4_dce: uart4grp { 265 fsl,pins = < 266 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 267 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 268 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 269 >; 270 }; 271 272 pinctrl_uart5_dce: uart5grp { 273 fsl,pins = < 274 MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 275 MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 276 MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ 277 >; 278 }; 279 280 pinctrl_usbh1: usbh1grp { 281 fsl,pins = < 282 MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 283 >; 284 }; 285 286 pinctrl_usdhc3: usdhc3grp { 287 fsl,pins = < 288 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 289 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 290 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 291 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 292 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 293 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 294 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 295 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 296 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 297 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 298 >; 299 }; 300}; 301 302&fec { 303 pinctrl-names = "default"; 304 pinctrl-0 = <&pinctrl_enet>; 305 phy-mode = "rmii"; 306 phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; 307 phy-handle = <&phy>; 308 status = "okay"; 309 310 mdio { 311 #address-cells = <1>; 312 #size-cells = <0>; 313 314 phy: ethernet-phy@1 { 315 compatible = "ethernet-phy-ieee802.3-c22"; 316 reg = <1>; 317 }; 318 }; 319}; 320 321&pcie { 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_pcie>; 324 reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; 325 status = "okay"; 326}; 327 328&uart1 { 329 pinctrl-names = "default"; 330 pinctrl-0 = <&pinctrl_uart1_dte>; 331 uart-has-rtscts; 332 fsl,dte-mode; 333 dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 334 dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 335 dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 336 status = "okay"; 337}; 338 339&uart2 { 340 pinctrl-names = "default"; 341 pinctrl-0 = <&pinctrl_uart2_dte>; 342 uart-has-rtscts; 343 fsl,dte-mode; 344 dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 345 dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; 346 dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; 347 status = "okay"; 348}; 349 350&uart3 { 351 pinctrl-names = "default"; 352 pinctrl-0 = <&pinctrl_uart3_dce>; 353 status = "okay"; 354}; 355 356&uart4 { 357 pinctrl-names = "default"; 358 pinctrl-0 = <&pinctrl_uart4_dce>; 359 rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; 360 status = "okay"; 361}; 362 363&uart5 { 364 pinctrl-names = "default"; 365 pinctrl-0 = <&pinctrl_uart5_dce>; 366 rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; 367 status = "okay"; 368}; 369 370&usbh1 { 371 pinctrl-names = "default"; 372 pinctrl-0 = <&pinctrl_usbh1>; 373 vbus-supply = <®_usb_h1_vbus>; 374 status = "okay"; 375}; 376 377&usbotg { 378 dr_mode = "peripheral"; 379 status = "okay"; 380}; 381 382&usdhc3 { 383 pinctrl-names = "default"; 384 pinctrl-0 = <&pinctrl_usdhc3>; 385 bus-width = <8>; 386 non-removable; 387 status = "okay"; 388}; 389