1/* 2 * Copyright 2012-2017 <LW@KARO-electronics.de> 3 * based on imx53-qsb.dts 4 * Copyright 2011 Freescale Semiconductor, Inc. 5 * Copyright 2011 Linaro Ltd. 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45#include "imx53.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "Ka-Ro electronics TX53 module"; 50 compatible = "karo,tx53", "fsl,imx53"; 51 52 /* Will be filled by the bootloader */ 53 memory@70000000 { 54 device_type = "memory"; 55 reg = <0x70000000 0>; 56 }; 57 58 aliases { 59 can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */ 60 can1 = &can1; 61 ipu = &ipu; 62 reg-can-xcvr = ®_can_xcvr; 63 usbh1 = &usbh1; 64 usbotg = &usbotg; 65 }; 66 67 clocks { 68 ckih1 { 69 clock-frequency = <0>; 70 }; 71 }; 72 73 mclk: clock-mclk { 74 compatible = "fixed-clock"; 75 #clock-cells = <0>; 76 clock-frequency = <26000000>; 77 }; 78 79 gpio-keys { 80 compatible = "gpio-keys"; 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pinctrl_gpio_key>; 83 84 key-power { 85 label = "Power Button"; 86 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; 87 linux,code = <116>; /* KEY_POWER */ 88 wakeup-source; 89 }; 90 }; 91 92 leds { 93 compatible = "gpio-leds"; 94 pinctrl-names = "default"; 95 pinctrl-0 = <&pinctrl_stk5led>; 96 97 led-user { 98 label = "Heartbeat"; 99 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; 100 linux,default-trigger = "heartbeat"; 101 }; 102 }; 103 104 reg_2v5: regulator-2v5 { 105 compatible = "regulator-fixed"; 106 regulator-name = "2V5"; 107 regulator-min-microvolt = <2500000>; 108 regulator-max-microvolt = <2500000>; 109 }; 110 111 reg_3v3: regulator-3v3 { 112 compatible = "regulator-fixed"; 113 regulator-name = "3V3"; 114 regulator-min-microvolt = <3300000>; 115 regulator-max-microvolt = <3300000>; 116 }; 117 118 reg_can_xcvr: regulator-can-xcvr { 119 compatible = "regulator-fixed"; 120 regulator-name = "CAN XCVR"; 121 regulator-min-microvolt = <3300000>; 122 regulator-max-microvolt = <3300000>; 123 pinctrl-names = "default"; 124 pinctrl-0 = <&pinctrl_can_xcvr>; 125 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; 126 }; 127 128 reg_usbh1_vbus: regulator-usbh1-vbus { 129 compatible = "regulator-fixed"; 130 regulator-name = "usbh1_vbus"; 131 regulator-min-microvolt = <5000000>; 132 regulator-max-microvolt = <5000000>; 133 pinctrl-names = "default"; 134 pinctrl-0 = <&pinctrl_usbh1_vbus>; 135 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 136 enable-active-high; 137 }; 138 139 reg_usbotg_vbus: regulator-usbotg-vbus { 140 compatible = "regulator-fixed"; 141 regulator-name = "usbotg_vbus"; 142 regulator-min-microvolt = <5000000>; 143 regulator-max-microvolt = <5000000>; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&pinctrl_usbotg_vbus>; 146 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; 147 enable-active-high; 148 }; 149 150 sound { 151 compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000"; 152 model = "tx53-audio-sgtl5000"; 153 ssi-controller = <&ssi1>; 154 audio-codec = <&sgtl5000>; 155 audio-routing = 156 "MIC_IN", "Mic Jack", 157 "Mic Jack", "Mic Bias", 158 "Headphone Jack", "HP_OUT"; 159 /* '1' based port numbers according to datasheet names */ 160 mux-int-port = <1>; 161 mux-ext-port = <5>; 162 }; 163}; 164 165&audmux { 166 pinctrl-names = "default"; 167 pinctrl-0 = <&pinctrl_ssi1>; 168 status = "okay"; 169}; 170 171&can1 { 172 pinctrl-names = "default"; 173 pinctrl-0 = <&pinctrl_can1>; 174 xceiver-supply = <®_can_xcvr>; 175 status = "okay"; 176}; 177 178&can2 { 179 pinctrl-names = "default"; 180 pinctrl-0 = <&pinctrl_can2>; 181 xceiver-supply = <®_can_xcvr>; 182 status = "okay"; 183}; 184 185&ecspi1 { 186 pinctrl-names = "default"; 187 pinctrl-0 = <&pinctrl_ecspi1>; 188 status = "okay"; 189 190 cs-gpios = < 191 &gpio2 30 GPIO_ACTIVE_HIGH 192 &gpio3 19 GPIO_ACTIVE_HIGH 193 >; 194 195}; 196 197&esdhc1 { 198 cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 199 fsl,wp-controller; 200 pinctrl-names = "default"; 201 pinctrl-0 = <&pinctrl_esdhc1>; 202 status = "okay"; 203}; 204 205&esdhc2 { 206 cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 207 fsl,wp-controller; 208 pinctrl-names = "default"; 209 pinctrl-0 = <&pinctrl_esdhc2>; 210 status = "okay"; 211}; 212 213&fec { 214 pinctrl-names = "default"; 215 pinctrl-0 = <&pinctrl_fec>; 216 phy-mode = "rmii"; 217 phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 218 phy-handle = <&phy0>; 219 mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ 220 status = "okay"; 221 222 mdio { 223 #address-cells = <1>; 224 #size-cells = <0>; 225 226 phy0: ethernet-phy@0 { 227 reg = <0>; 228 interrupt-parent = <&gpio2>; 229 interrupts = <4 IRQ_TYPE_EDGE_FALLING>; 230 device_type = "ethernet-phy"; 231 }; 232 }; 233}; 234 235&i2c1 { 236 pinctrl-names = "default", "gpio"; 237 pinctrl-0 = <&pinctrl_i2c1>; 238 pinctrl-0 = <&pinctrl_i2c1_gpio>; 239 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 240 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 241 clock-frequency = <400000>; 242 status = "okay"; 243 244 rtc1: rtc@68 { 245 compatible = "dallas,ds1339"; 246 reg = <0x68>; 247 pinctrl-names = "default"; 248 pinctrl-0 = <&pinctrl_ds1339>; 249 interrupt-parent = <&gpio4>; 250 interrupts = <20 IRQ_TYPE_EDGE_FALLING>; 251 trickle-resistor-ohms = <250>; 252 trickle-diode-disable; 253 }; 254}; 255 256&iomuxc { 257 pinctrl-names = "default"; 258 pinctrl-0 = <&pinctrl_hog>; 259 260 pinctrl_hog: hoggrp { 261 /* pins not in use by any device on the Starterkit board series */ 262 fsl,pins = < 263 /* CMOS Sensor Interface */ 264 MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4 265 MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4 266 MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4 267 MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4 268 MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4 269 MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4 270 MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4 271 MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4 272 MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4 273 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4 274 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4 275 MX53_PAD_GPIO_0__GPIO1_0 0x1f4 276 /* Module Specific Signal */ 277 /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */ 278 /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */ 279 MX53_PAD_EIM_D29__GPIO3_29 0x1f4 280 MX53_PAD_EIM_EB3__GPIO2_31 0x1f4 281 /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */ 282 /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */ 283 MX53_PAD_EIM_A19__GPIO2_19 0x1f4 284 MX53_PAD_EIM_A20__GPIO2_18 0x1f4 285 MX53_PAD_EIM_A21__GPIO2_17 0x1f4 286 MX53_PAD_EIM_A22__GPIO2_16 0x1f4 287 MX53_PAD_EIM_A23__GPIO6_6 0x1f4 288 MX53_PAD_EIM_A24__GPIO5_4 0x1f4 289 MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4 290 MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4 291 MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4 292 MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4 293 /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */ 294 /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */ 295 MX53_PAD_GPIO_13__GPIO4_3 0x1f4 296 MX53_PAD_EIM_CS0__GPIO2_23 0x1f4 297 MX53_PAD_EIM_CS1__GPIO2_24 0x1f4 298 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4 299 MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4 300 MX53_PAD_EIM_EB0__GPIO2_28 0x1f4 301 MX53_PAD_EIM_EB1__GPIO2_29 0x1f4 302 MX53_PAD_EIM_OE__GPIO2_25 0x1f4 303 MX53_PAD_EIM_LBA__GPIO2_27 0x1f4 304 MX53_PAD_EIM_RW__GPIO2_26 0x1f4 305 MX53_PAD_EIM_DA8__GPIO3_8 0x1f4 306 MX53_PAD_EIM_DA9__GPIO3_9 0x1f4 307 MX53_PAD_EIM_DA10__GPIO3_10 0x1f4 308 MX53_PAD_EIM_DA11__GPIO3_11 0x1f4 309 MX53_PAD_EIM_DA12__GPIO3_12 0x1f4 310 MX53_PAD_EIM_DA13__GPIO3_13 0x1f4 311 MX53_PAD_EIM_DA14__GPIO3_14 0x1f4 312 MX53_PAD_EIM_DA15__GPIO3_15 0x1f4 313 >; 314 }; 315 316 pinctrl_can1: can1grp { 317 fsl,pins = < 318 MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 319 MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 320 >; 321 }; 322 323 pinctrl_can2: can2grp { 324 fsl,pins = < 325 MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 326 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 327 >; 328 }; 329 330 pinctrl_can_xcvr: can-xcvrgrp { 331 fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */ 332 }; 333 334 pinctrl_ds1339: ds1339grp { 335 fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>; 336 }; 337 338 pinctrl_ecspi1: ecspi1grp { 339 fsl,pins = < 340 MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 341 MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 342 MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 343 MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 344 MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 345 MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 346 >; 347 }; 348 349 pinctrl_esdhc1: esdhc1grp { 350 fsl,pins = < 351 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 352 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 353 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 354 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 355 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 356 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 357 MX53_PAD_EIM_D24__GPIO3_24 0x1f0 358 >; 359 }; 360 361 pinctrl_esdhc2: esdhc2grp { 362 fsl,pins = < 363 MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 364 MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 365 MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 366 MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 367 MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 368 MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 369 MX53_PAD_EIM_D25__GPIO3_25 0x1f0 370 >; 371 }; 372 373 pinctrl_fec: fecgrp { 374 fsl,pins = < 375 MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 376 MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 377 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 378 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 379 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 380 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 381 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 382 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 383 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 384 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 385 >; 386 }; 387 388 pinctrl_gpio_key: gpio-keygrp { 389 fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>; 390 }; 391 392 pinctrl_i2c1: i2c1grp { 393 fsl,pins = < 394 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 395 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 396 >; 397 }; 398 399 pinctrl_i2c1_gpio: i2c1-gpiogrp { 400 fsl,pins = < 401 MX53_PAD_EIM_D21__GPIO3_21 0x400001e6 402 MX53_PAD_EIM_D28__GPIO3_28 0x400001e6 403 >; 404 }; 405 406 pinctrl_i2c3: i2c3grp { 407 fsl,pins = < 408 MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4 409 MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 410 >; 411 }; 412 413 pinctrl_i2c3_gpio: i2c3-gpiogrp { 414 fsl,pins = < 415 MX53_PAD_GPIO_3__GPIO1_3 0x400001e6 416 MX53_PAD_GPIO_6__GPIO1_6 0x400001e6 417 >; 418 }; 419 420 pinctrl_nand: nandgrp { 421 fsl,pins = < 422 MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 423 MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 424 MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 425 MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 426 MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 427 MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 428 MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 429 MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4 430 MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4 431 MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4 432 MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4 433 MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4 434 MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4 435 MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4 436 MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4 437 >; 438 }; 439 440 pinctrl_pwm2: pwm2grp { 441 fsl,pins = < 442 MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 443 >; 444 }; 445 446 pinctrl_ssi1: ssi1grp { 447 fsl,pins = < 448 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 449 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 450 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 451 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 452 >; 453 }; 454 455 pinctrl_ssi2: ssi2grp { 456 fsl,pins = < 457 MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 458 MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 459 MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 460 MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 461 MX53_PAD_EIM_D27__GPIO3_27 0x1f0 462 >; 463 }; 464 465 pinctrl_stk5led: stk5ledgrp { 466 fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>; 467 }; 468 469 pinctrl_uart1: uart1grp { 470 fsl,pins = < 471 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 472 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 473 MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 474 MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 475 >; 476 }; 477 478 pinctrl_uart2: uart2grp { 479 fsl,pins = < 480 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 481 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 482 MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 483 MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 484 >; 485 }; 486 487 pinctrl_uart3: uart3grp { 488 fsl,pins = < 489 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 490 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 491 MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 492 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 493 >; 494 }; 495 496 pinctrl_usbh1: usbh1grp { 497 fsl,pins = < 498 MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */ 499 >; 500 }; 501 502 pinctrl_usbh1_vbus: usbh1-vbusgrp { 503 fsl,pins = < 504 MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */ 505 >; 506 }; 507 508 pinctrl_usbotg_vbus: usbotg-vbusgrp { 509 fsl,pins = < 510 MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */ 511 MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */ 512 >; 513 }; 514}; 515 516&ipu { 517 status = "okay"; 518}; 519 520&nfc { 521 pinctrl-names = "default"; 522 pinctrl-0 = <&pinctrl_nand>; 523 nand-bus-width = <8>; 524 nand-ecc-mode = "hw"; 525 nand-on-flash-bbt; 526 status = "okay"; 527}; 528 529&pwm2 { 530 pinctrl-names = "default"; 531 pinctrl-0 = <&pinctrl_pwm2>; 532}; 533 534&sdma { 535 fsl,sdma-ram-script-name = "sdma-imx53.bin"; 536}; 537 538&ssi1 { 539 status = "okay"; 540}; 541 542&ssi2 { 543 status = "disabled"; 544}; 545 546&uart1 { 547 pinctrl-names = "default"; 548 pinctrl-0 = <&pinctrl_uart1>; 549 uart-has-rtscts; 550 status = "okay"; 551}; 552 553&uart2 { 554 pinctrl-names = "default"; 555 pinctrl-0 = <&pinctrl_uart2>; 556 uart-has-rtscts; 557 status = "okay"; 558}; 559 560&uart3 { 561 pinctrl-names = "default"; 562 pinctrl-0 = <&pinctrl_uart3>; 563 uart-has-rtscts; 564 status = "okay"; 565}; 566 567&usbh1 { 568 pinctrl-names = "default"; 569 pinctrl-0 = <&pinctrl_usbh1>; 570 phy_type = "utmi"; 571 disable-over-current; 572 vbus-supply = <®_usbh1_vbus>; 573 status = "okay"; 574}; 575 576&usbotg { 577 phy_type = "utmi"; 578 dr_mode = "peripheral"; 579 disable-over-current; 580 vbus-supply = <®_usbotg_vbus>; 581 status = "okay"; 582}; 583