xref: /linux/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
4 * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
5 */
6
7#include "imx53.dtsi"
8
9/ {
10	model = "TQ TQMa53";
11	compatible = "tq,tqma53", "fsl,imx53";
12
13	memory@70000000 {
14		device_type = "memory";
15		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
16	};
17
18	reg_3p3v: regulator-3p3v {
19		compatible = "regulator-fixed";
20		regulator-name = "3P3V";
21		regulator-min-microvolt = <3300000>;
22		regulator-max-microvolt = <3300000>;
23		regulator-always-on;
24	};
25};
26
27&esdhc2 {
28	pinctrl-names = "default";
29	pinctrl-0 = <&pinctrl_esdhc2>,
30		    <&pinctrl_esdhc2_cdwp>;
31	vmmc-supply = <&reg_3p3v>;
32	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
33	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
34	status = "disabled";
35};
36
37&uart3 {
38	pinctrl-names = "default";
39	pinctrl-0 = <&pinctrl_uart3>;
40	status = "disabled";
41};
42
43&ecspi1 {
44	pinctrl-names = "default";
45	pinctrl-0 = <&pinctrl_ecspi1>;
46	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
47		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
48	status = "disabled";
49};
50
51&esdhc3 { /* EMMC */
52	pinctrl-names = "default";
53	pinctrl-0 = <&pinctrl_esdhc3>;
54	vmmc-supply = <&reg_3p3v>;
55	non-removable;
56	bus-width = <8>;
57	status = "okay";
58};
59
60&iomuxc {
61	pinctrl-names = "default";
62	pinctrl-0 = <&pinctrl_hog>;
63
64	imx53-tqma53 {
65		pinctrl_hog: hoggrp {
66			fsl,pins = <
67				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
68				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
69				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
70				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
71				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
72				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
73				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
74				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
75				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
76				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
77				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
78			>;
79		};
80
81		pinctrl_audmux: audmuxgrp {
82			fsl,pins = <
83				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
84				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
85				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
86				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
87			>;
88		};
89
90		pinctrl_can1: can1grp {
91			fsl,pins = <
92				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
93				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
94			>;
95		};
96
97		pinctrl_can2: can2grp {
98			fsl,pins = <
99				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
100				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
101			>;
102		};
103
104		pinctrl_cspi: cspigrp {
105			fsl,pins = <
106				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
107				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
108				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
109			>;
110		};
111
112		pinctrl_ecspi1: ecspi1grp {
113			fsl,pins = <
114				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
115				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
116				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
117			>;
118		};
119
120		pinctrl_esdhc2: esdhc2grp {
121			fsl,pins = <
122				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
123				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
124				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
125				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
126				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
127				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
128			>;
129		};
130
131		pinctrl_esdhc2_cdwp: esdhc2cdwp {
132			fsl,pins = <
133				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
134				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
135			>;
136		};
137
138		pinctrl_esdhc3: esdhc3grp {
139			fsl,pins = <
140				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
141				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
142				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
143				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
144				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
145				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
146				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
147				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
148				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
149				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
150			>;
151		};
152
153		pinctrl_fec: fecgrp {
154			fsl,pins = <
155				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
156				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
157				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
158				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
159				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
160				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
161				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
162				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
163				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
164				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
165			>;
166		};
167
168		pinctrl_i2c2: i2c2grp {
169			fsl,pins = <
170				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
171				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
172			>;
173		};
174
175		pinctrl_i2c3: i2c3grp {
176			fsl,pins = <
177				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
178				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
179			>;
180		};
181
182		pinctrl_uart1: uart1grp {
183			fsl,pins = <
184				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
185				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
186			>;
187		};
188
189		pinctrl_uart2: uart2grp {
190			fsl,pins = <
191				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
192				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
193			>;
194		};
195
196		pinctrl_uart3: uart3grp {
197			fsl,pins = <
198				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
199				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
200			>;
201		};
202	};
203};
204
205&uart1 {
206	pinctrl-names = "default";
207	pinctrl-0 = <&pinctrl_uart1>;
208	uart-has-rtscts;
209	status = "disabled";
210};
211
212&uart2 {
213	pinctrl-names = "default";
214	pinctrl-0 = <&pinctrl_uart2>;
215	status = "disabled";
216};
217
218&can1 {
219	pinctrl-names = "default";
220	pinctrl-0 = <&pinctrl_can1>;
221	status = "disabled";
222};
223
224&can2 {
225	pinctrl-names = "default";
226	pinctrl-0 = <&pinctrl_can2>;
227	status = "disabled";
228};
229
230&i2c3 {
231	pinctrl-names = "default";
232	pinctrl-0 = <&pinctrl_i2c3>;
233	status = "disabled";
234};
235
236&cspi {
237	pinctrl-names = "default";
238	pinctrl-0 = <&pinctrl_cspi>;
239	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
240		   <&gpio1 21 GPIO_ACTIVE_LOW>;
241	status = "disabled";
242};
243
244&i2c2 {
245	pinctrl-names = "default";
246	pinctrl-0 = <&pinctrl_i2c2>;
247	status = "okay";
248
249	pmic: mc34708@8 {
250		compatible = "fsl,mc34708";
251		reg = <0x8>;
252		fsl,mc13xxx-uses-rtc;
253		interrupt-parent = <&gpio2>;
254		interrupts = <6 4>; /* PATA_DATA6, active high */
255	};
256
257	sensor1: lm75@48 {
258		compatible = "lm75";
259		reg = <0x48>;
260	};
261
262	eeprom: eeprom@50 {
263		compatible = "atmel,24c64";
264		pagesize = <32>;
265		reg = <0x50>;
266	};
267};
268
269&fec {
270	pinctrl-names = "default";
271	pinctrl-0 = <&pinctrl_fec>;
272	phy-mode = "rmii";
273	status = "disabled";
274};
275