xref: /linux/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2018
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
5 */
6
7/dts-v1/;
8#include "imx53-kp.dtsi"
9
10/ {
11	model = "K+P imx53 DDC";
12	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
13
14	backlight_lcd: backlight {
15		compatible = "pwm-backlight";
16		pwms = <&pwm2 0 50000>;
17		power-supply = <&reg_backlight>;
18		brightness-levels = <0 24 28 32 36
19				     40 44 48 52 56
20				     60 64 68 72 76
21				     80 84 88 92 96 100>;
22		default-brightness-level = <20>;
23	};
24
25	lcd_display: display {
26		compatible = "fsl,imx-parallel-display";
27		#address-cells = <1>;
28		#size-cells = <0>;
29		interface-pix-fmt = "rgb24";
30		pinctrl-names = "default";
31		pinctrl-0 = <&pinctrl_disp>;
32
33		port@0 {
34			reg = <0>;
35
36			display1_in: endpoint {
37				remote-endpoint = <&ipu_di1_disp1>;
38			};
39		};
40
41		port@1 {
42			reg = <1>;
43
44			lcd_display_out: endpoint {
45				remote-endpoint = <&lcd_panel_in>;
46			};
47		};
48	};
49
50	lcd_panel: lcd-panel {
51		compatible = "koe,tx14d24vm1bpa";
52		backlight = <&backlight_lcd>;
53		power-supply = <&reg_3v3>;
54
55		port {
56			lcd_panel_in: endpoint {
57				remote-endpoint = <&lcd_display_out>;
58			};
59		};
60	};
61
62	reg_backlight: regulator-backlight {
63		compatible = "regulator-fixed";
64		regulator-name = "backlight-supply";
65		regulator-min-microvolt = <15000000>;
66		regulator-max-microvolt = <15000000>;
67		regulator-always-on;
68	};
69};
70
71&fec {
72	status = "okay";
73};
74
75&i2c3 {
76	adc@48 {
77		compatible = "ti,ads1015";
78		reg = <0x48>;
79		#address-cells = <1>;
80		#size-cells = <0>;
81
82		channel@4 {
83			reg = <4>;
84			ti,gain = <2>;
85			ti,datarate = <4>;
86		};
87
88		channel@6 {
89			reg = <6>;
90			ti,gain = <2>;
91			ti,datarate = <4>;
92		};
93	};
94
95	gpio-expander2@21 {
96		compatible = "nxp,pcf8574";
97		reg = <0x21>;
98		interrupts = <109>;
99		#gpio-cells = <2>;
100		gpio-controller;
101	};
102};
103
104&iomuxc {
105	imx53-kp-ddc {
106		pinctrl_disp: dispgrp {
107			fsl,pins = <
108				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
109				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
110				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
111				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
112				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
113				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
114				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
115				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
116				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
117				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
118				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
119				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
120				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
121				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
122				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
123				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
124				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
125				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
126				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
127				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
128				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
129				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
130				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
131				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
132				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
133				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
134				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
135			>;
136		};
137	};
138};
139
140&ipu_di1_disp1 {
141	remote-endpoint = <&display1_in>;
142};
143
144&pmic {
145	fsl,mc13xxx-uses-touch;
146};
147