xref: /linux/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts (revision 8c5ce9094b0e2d62abc719b21069073f8fa2b930)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2017 Beckhoff Automation GmbH & Co. KG
4 * based on imx53-qsb.dts
5 */
6
7/dts-v1/;
8#include "imx53.dtsi"
9
10/ {
11	model = "Beckhoff CX9020 Embedded PC";
12	compatible = "bhf,cx9020", "fsl,imx53";
13
14	chosen {
15		stdout-path = &uart2;
16	};
17
18	memory@70000000 {
19		device_type = "memory";
20		reg = <0x70000000 0x20000000>,
21		      <0xb0000000 0x20000000>;
22	};
23
24	display-0 {
25		#address-cells = <1>;
26		#size-cells = <0>;
27		compatible = "fsl,imx-parallel-display";
28		interface-pix-fmt = "rgb24";
29		pinctrl-names = "default";
30		pinctrl-0 = <&pinctrl_ipu_disp0>;
31
32		port@0 {
33			reg = <0>;
34
35			display0_in: endpoint {
36				remote-endpoint = <&ipu_di0_disp0>;
37			};
38		};
39
40		port@1 {
41			reg = <1>;
42
43			display0_out: endpoint {
44				remote-endpoint = <&tfp410_in>;
45			};
46		};
47	};
48
49	dvi-connector {
50		compatible = "dvi-connector";
51		ddc-i2c-bus = <&i2c2>;
52		digital;
53
54		port {
55			dvi_connector_in: endpoint {
56				remote-endpoint = <&tfp410_out>;
57			};
58		};
59	};
60
61	dvi-converter {
62		compatible = "ti,tfp410";
63
64		ports {
65			#address-cells = <1>;
66			#size-cells = <0>;
67
68			port@0 {
69				reg = <0>;
70
71				tfp410_in: endpoint {
72					remote-endpoint = <&display0_out>;
73				};
74			};
75
76			port@1 {
77				reg = <1>;
78
79				tfp410_out: endpoint {
80					remote-endpoint = <&dvi_connector_in>;
81				};
82			};
83		};
84	};
85
86	leds {
87		compatible = "gpio-leds";
88
89		led-pwr-r {
90			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
91			default-state = "off";
92		};
93
94		led-pwr-g {
95			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
96			default-state = "on";
97		};
98
99		led-pwr-b {
100			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
101			default-state = "off";
102		};
103
104		led-sd1-b {
105			linux,default-trigger = "mmc0";
106			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
107		};
108
109		led-sd2-b {
110			linux,default-trigger = "mmc1";
111			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
112		};
113	};
114
115	regulator-3p2v {
116		compatible = "regulator-fixed";
117		regulator-name = "3P2V";
118		regulator-min-microvolt = <3200000>;
119		regulator-max-microvolt = <3200000>;
120		regulator-always-on;
121	};
122
123	reg_usb_vbus: regulator-vbus {
124		compatible = "regulator-fixed";
125		regulator-name = "usb_vbus";
126		regulator-min-microvolt = <5000000>;
127		regulator-max-microvolt = <5000000>;
128		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
129		enable-active-high;
130	};
131};
132
133&esdhc1 {
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_esdhc1>;
136	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
137	bus-width = <4>;
138	status = "okay";
139};
140
141&esdhc2 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_esdhc2>;
144	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
145	bus-width = <4>;
146	status = "okay";
147};
148
149&fec {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pinctrl_fec>;
152	phy-mode = "rmii";
153	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
154	status = "okay";
155};
156
157&i2c2 {
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_i2c2>;
160	status = "okay";
161};
162
163&ipu_di0_disp0 {
164	remote-endpoint = <&display0_in>;
165};
166
167&uart2 {
168	pinctrl-names = "default";
169	pinctrl-0 = <&pinctrl_uart2>;
170	fsl,dte-mode;
171	status = "okay";
172};
173
174&usbh1 {
175	vbus-supply = <&reg_usb_vbus>;
176	phy_type = "utmi";
177	status = "okay";
178};
179
180&usbotg {
181	dr_mode = "peripheral";
182	status = "okay";
183};
184
185&vpu {
186	status = "okay";
187};
188
189&iomuxc {
190	pinctrl-names = "default";
191	pinctrl-0 = <&pinctrl_hog>;
192
193	pinctrl_hog: hoggrp {
194		fsl,pins = <
195			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
196			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
197			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
198			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
199			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
200		>;
201	};
202
203	pinctrl_esdhc1: esdhc1grp {
204		fsl,pins = <
205			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
206			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
207			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
208			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
209			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
210			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
211			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
212			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
213			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
214		>;
215	};
216
217	pinctrl_esdhc2: esdhc2grp {
218		fsl,pins = <
219			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
220			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
221			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
222			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
223			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
224			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
225			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
226			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
227			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
228		>;
229	};
230
231	pinctrl_fec: fecgrp {
232		fsl,pins = <
233			MX53_PAD_FEC_MDC__FEC_MDC		0x4
234			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
235			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
236			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
237			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
238			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
239			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
240			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
241			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
242			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
243		>;
244	};
245
246	pinctrl_i2c2: i2c2grp {
247		fsl,pins = <
248			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
249			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
250		>;
251	};
252
253	pinctrl_ipu_disp0: ipudisp0grp {
254		fsl,pins = <
255			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
256			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
257			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
258			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
259			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
260			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
261			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
262			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
263			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
264			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
265			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
266			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
267			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
268			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
269			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
270			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
271			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
272			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
273			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
274			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
275			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
276			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
277			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
278			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
279			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
280			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
281			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
282			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
283			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
284		>;
285	};
286
287	pinctrl_uart2: uart2grp {
288		fsl,pins = <
289			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
290			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
291			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
292			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
293		>;
294	};
295};
296