xref: /linux/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2011 Freescale Semiconductor, Inc.
4// Copyright 2011 Linaro Ltd.
5
6/dts-v1/;
7#include "imx51.dtsi"
8
9/ {
10	model = "Freescale i.MX51 Babbage Board";
11	compatible = "fsl,imx51-babbage", "fsl,imx51";
12
13	chosen {
14		stdout-path = &uart1;
15	};
16
17	memory@90000000 {
18		device_type = "memory";
19		reg = <0x90000000 0x20000000>;
20	};
21
22	ckih1 {
23		clock-frequency = <22579200>;
24	};
25
26	clk_osc: clk-osc {
27		compatible = "fixed-clock";
28		#clock-cells = <0>;
29		clock-frequency = <26000000>;
30	};
31
32	clk_osc_gate: clk-osc-gate {
33		compatible = "gpio-gate-clock";
34		pinctrl-names = "default";
35		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
36		clocks = <&clk_osc>;
37		#clock-cells = <0>;
38		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
39	};
40
41	clk_audio: clk-audio {
42		compatible = "gpio-gate-clock";
43		pinctrl-names = "default";
44		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
45		clocks = <&clk_osc_gate>;
46		#clock-cells = <0>;
47		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
48	};
49
50	clk_usb: clk-usb {
51		compatible = "gpio-gate-clock";
52		pinctrl-names = "default";
53		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
54		clocks = <&clk_osc_gate>;
55		#clock-cells = <0>;
56		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
57	};
58
59	display1: disp1 {
60		compatible = "fsl,imx-parallel-display";
61		#address-cells = <1>;
62		#size-cells = <0>;
63		interface-pix-fmt = "rgb24";
64		pinctrl-names = "default";
65		pinctrl-0 = <&pinctrl_ipu_disp1>;
66
67		port@0 {
68		reg = <0>;
69
70			display0_in: endpoint {
71				remote-endpoint = <&ipu_di0_disp1>;
72			};
73		};
74
75		port@1 {
76			reg = <1>;
77
78			parallel_display_out: endpoint {
79				remote-endpoint = <&tfp410_in>;
80			};
81		};
82	};
83
84	display2: disp2 {
85		compatible = "fsl,imx-parallel-display";
86		interface-pix-fmt = "rgb565";
87		pinctrl-names = "default";
88		pinctrl-0 = <&pinctrl_ipu_disp2>;
89		status = "disabled";
90		display-timings {
91			native-mode = <&timing1>;
92			timing1: timing-claawvga {
93				clock-frequency = <27000000>;
94				hactive = <800>;
95				vactive = <480>;
96				hback-porch = <40>;
97				hfront-porch = <60>;
98				vback-porch = <10>;
99				vfront-porch = <10>;
100				hsync-len = <20>;
101				vsync-len = <10>;
102				hsync-active = <0>;
103				vsync-active = <0>;
104				de-active = <1>;
105				pixelclk-active = <0>;
106			};
107		};
108
109		port {
110			display1_in: endpoint {
111				remote-endpoint = <&ipu_di1_disp2>;
112			};
113		};
114	};
115
116	dvi-connector {
117		compatible = "dvi-connector";
118		digital;
119
120		port {
121			dvi_connector_in: endpoint {
122				remote-endpoint = <&tfp410_out>;
123			};
124		};
125	};
126
127	dvi-encoder {
128		compatible = "ti,tfp410";
129
130		ports {
131			#address-cells = <1>;
132			#size-cells = <0>;
133
134			port@0 {
135				reg = <0>;
136
137				tfp410_in: endpoint {
138					remote-endpoint = <&parallel_display_out>;
139				};
140			};
141
142			port@1 {
143				reg = <1>;
144
145				tfp410_out: endpoint {
146					remote-endpoint = <&dvi_connector_in>;
147				};
148			};
149		};
150	};
151
152	gpio-keys {
153		compatible = "gpio-keys";
154		pinctrl-names = "default";
155		pinctrl-0 = <&pinctrl_gpio_keys>;
156
157		key-power {
158			label = "Power Button";
159			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
160			linux,code = <KEY_POWER>;
161			wakeup-source;
162		};
163	};
164
165	leds {
166		compatible = "gpio-leds";
167		pinctrl-names = "default";
168		pinctrl-0 = <&pinctrl_gpio_leds>;
169
170		led-diagnostic {
171			label = "diagnostic";
172			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
173		};
174	};
175
176	reg_hub_reset: regulator-hub-reset {
177		compatible = "regulator-fixed";
178		pinctrl-names = "default";
179		pinctrl-0 = <&pinctrl_usbotgreg>;
180		regulator-name = "hub_reset";
181		regulator-min-microvolt = <5000000>;
182		regulator-max-microvolt = <5000000>;
183		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
184		enable-active-high;
185	};
186
187	sound {
188		compatible = "fsl,imx51-babbage-sgtl5000",
189			     "fsl,imx-audio-sgtl5000";
190		model = "imx51-babbage-sgtl5000";
191		ssi-controller = <&ssi2>;
192		audio-codec = <&sgtl5000>;
193		audio-routing =
194			"MIC_IN", "Mic Jack",
195			"Mic Jack", "Mic Bias",
196			"Headphone Jack", "HP_OUT";
197		mux-int-port = <2>;
198		mux-ext-port = <3>;
199	};
200
201	usbphy1: usbphy1 {
202		compatible = "usb-nop-xceiv";
203		pinctrl-names = "default";
204		pinctrl-0 = <&pinctrl_usbh1reg>;
205		clocks = <&clk_usb>;
206		clock-names = "main_clk";
207		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
208		vcc-supply = <&vusb_reg>;
209		#phy-cells = <0>;
210	};
211};
212
213&audmux {
214	pinctrl-names = "default";
215	pinctrl-0 = <&pinctrl_audmux>;
216	status = "okay";
217};
218
219&ecspi1 {
220	pinctrl-names = "default";
221	pinctrl-0 = <&pinctrl_ecspi1>;
222	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
223		   <&gpio4 25 GPIO_ACTIVE_LOW>;
224	status = "okay";
225
226	pmic: mc13892@0 {
227		compatible = "fsl,mc13892";
228		pinctrl-names = "default";
229		pinctrl-0 = <&pinctrl_pmic>;
230		spi-max-frequency = <6000000>;
231		spi-cs-high;
232		reg = <0>;
233		interrupt-parent = <&gpio1>;
234		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
235		fsl,mc13xxx-uses-adc;
236		fsl,mc13xxx-uses-rtc;
237
238		regulators {
239			sw1_reg: sw1 {
240				regulator-min-microvolt = <600000>;
241				regulator-max-microvolt = <1375000>;
242				regulator-boot-on;
243				regulator-always-on;
244			};
245
246			sw2_reg: sw2 {
247				regulator-min-microvolt = <900000>;
248				regulator-max-microvolt = <1850000>;
249				regulator-boot-on;
250				regulator-always-on;
251			};
252
253			sw3_reg: sw3 {
254				regulator-min-microvolt = <1100000>;
255				regulator-max-microvolt = <1850000>;
256				regulator-boot-on;
257				regulator-always-on;
258			};
259
260			sw4_reg: sw4 {
261				regulator-min-microvolt = <1100000>;
262				regulator-max-microvolt = <1850000>;
263				regulator-boot-on;
264				regulator-always-on;
265			};
266
267			vpll_reg: vpll {
268				regulator-min-microvolt = <1050000>;
269				regulator-max-microvolt = <1800000>;
270				regulator-boot-on;
271				regulator-always-on;
272			};
273
274			vdig_reg: vdig {
275				regulator-min-microvolt = <1650000>;
276				regulator-max-microvolt = <1650000>;
277				regulator-boot-on;
278			};
279
280			vsd_reg: vsd {
281				regulator-min-microvolt = <1800000>;
282				regulator-max-microvolt = <3150000>;
283			};
284
285			vusb_reg: vusb {
286				regulator-boot-on;
287			};
288
289			vusb2_reg: vusb2 {
290				regulator-min-microvolt = <2400000>;
291				regulator-max-microvolt = <2775000>;
292				regulator-boot-on;
293				regulator-always-on;
294			};
295
296			vvideo_reg: vvideo {
297				regulator-min-microvolt = <2775000>;
298				regulator-max-microvolt = <2775000>;
299			};
300
301			vaudio_reg: vaudio {
302				regulator-min-microvolt = <2300000>;
303				regulator-max-microvolt = <3000000>;
304			};
305
306			vcam_reg: vcam {
307				regulator-min-microvolt = <2500000>;
308				regulator-max-microvolt = <3000000>;
309			};
310
311			vgen1_reg: vgen1 {
312				regulator-min-microvolt = <1200000>;
313				regulator-max-microvolt = <1200000>;
314			};
315
316			vgen2_reg: vgen2 {
317				regulator-min-microvolt = <1200000>;
318				regulator-max-microvolt = <3150000>;
319				regulator-always-on;
320			};
321
322			vgen3_reg: vgen3 {
323				regulator-min-microvolt = <1800000>;
324				regulator-max-microvolt = <2900000>;
325				regulator-always-on;
326			};
327		};
328	};
329
330	flash: at45db321d@1 {
331		#address-cells = <1>;
332		#size-cells = <1>;
333		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
334		spi-max-frequency = <25000000>;
335		reg = <1>;
336
337		partition@0 {
338			label = "U-Boot";
339			reg = <0x0 0x40000>;
340			read-only;
341		};
342
343		partition@40000 {
344			label = "Kernel";
345			reg = <0x40000 0x3c0000>;
346		};
347	};
348};
349
350&esdhc1 {
351	pinctrl-names = "default";
352	pinctrl-0 = <&pinctrl_esdhc1>;
353	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
354	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
355	status = "okay";
356};
357
358&esdhc2 {
359	pinctrl-names = "default";
360	pinctrl-0 = <&pinctrl_esdhc2>;
361	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
362	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
363	status = "okay";
364};
365
366&fec {
367	pinctrl-names = "default";
368	pinctrl-0 = <&pinctrl_fec>;
369	phy-mode = "mii";
370	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
371	phy-reset-duration = <1>;
372	status = "okay";
373};
374
375&i2c1 {
376	pinctrl-names = "default";
377	pinctrl-0 = <&pinctrl_i2c1>;
378	status = "okay";
379};
380
381&i2c2 {
382	pinctrl-names = "default";
383	pinctrl-0 = <&pinctrl_i2c2>;
384	status = "okay";
385
386	sgtl5000: codec@a {
387		compatible = "fsl,sgtl5000";
388		reg = <0x0a>;
389		#sound-dai-cells = <0>;
390		clocks = <&clk_audio>;
391		VDDA-supply = <&vdig_reg>;
392		VDDIO-supply = <&vvideo_reg>;
393	};
394};
395
396&ipu_di0_disp1 {
397	remote-endpoint = <&display0_in>;
398};
399
400&ipu_di1_disp2 {
401	remote-endpoint = <&display1_in>;
402};
403
404&kpp {
405	pinctrl-names = "default";
406	pinctrl-0 = <&pinctrl_kpp>;
407	linux,keymap = <
408		MATRIX_KEY(0, 0, KEY_UP)
409		MATRIX_KEY(0, 1, KEY_DOWN)
410		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
411		MATRIX_KEY(0, 3, KEY_HOME)
412		MATRIX_KEY(1, 0, KEY_RIGHT)
413		MATRIX_KEY(1, 1, KEY_LEFT)
414		MATRIX_KEY(1, 2, KEY_ENTER)
415		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
416		MATRIX_KEY(2, 0, KEY_F6)
417		MATRIX_KEY(2, 1, KEY_F8)
418		MATRIX_KEY(2, 2, KEY_F9)
419		MATRIX_KEY(2, 3, KEY_F10)
420		MATRIX_KEY(3, 0, KEY_F1)
421		MATRIX_KEY(3, 1, KEY_F2)
422		MATRIX_KEY(3, 2, KEY_F3)
423		MATRIX_KEY(3, 3, KEY_POWER)
424	>;
425	status = "okay";
426};
427
428&pmu {
429	secure-reg-access;
430};
431
432&ssi2 {
433	status = "okay";
434};
435
436&uart1 {
437	pinctrl-names = "default";
438	pinctrl-0 = <&pinctrl_uart1>;
439	uart-has-rtscts;
440	status = "okay";
441};
442
443&uart2 {
444	pinctrl-names = "default";
445	pinctrl-0 = <&pinctrl_uart2>;
446	status = "okay";
447};
448
449&uart3 {
450	pinctrl-names = "default";
451	pinctrl-0 = <&pinctrl_uart3>;
452	uart-has-rtscts;
453	status = "okay";
454};
455
456&usbh1 {
457	pinctrl-names = "default";
458	pinctrl-0 = <&pinctrl_usbh1>;
459	vbus-supply = <&reg_hub_reset>;
460	fsl,usbphy = <&usbphy1>;
461	phy_type = "ulpi";
462	status = "okay";
463};
464
465&usbphy0 {
466	vcc-supply = <&vusb_reg>;
467};
468
469&usbotg {
470	dr_mode = "otg";
471	disable-over-current;
472	phy_type = "utmi_wide";
473	status = "okay";
474};
475
476&iomuxc {
477	imx51-babbage {
478		pinctrl_audmux: audmuxgrp {
479			fsl,pins = <
480				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
481				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
482				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
483				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
484			>;
485		};
486
487		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
488			fsl,pins = <
489				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
490			>;
491		};
492
493		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
494			fsl,pins = <
495				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
496			>;
497		};
498
499		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
500			fsl,pins = <
501				MX51_PAD_EIM_D17__GPIO2_1		0x85
502			>;
503		};
504
505		pinctrl_ecspi1: ecspi1grp {
506			fsl,pins = <
507				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
508				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
509				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
510				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
511				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
512			>;
513		};
514
515		pinctrl_esdhc1: esdhc1grp {
516			fsl,pins = <
517				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
518				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
519				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
520				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
521				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
522				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
523				MX51_PAD_GPIO1_0__GPIO1_0		0x100
524				MX51_PAD_GPIO1_1__GPIO1_1		0x100
525			>;
526		};
527
528		pinctrl_esdhc2: esdhc2grp {
529			fsl,pins = <
530				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
531				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
532				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
533				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
534				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
535				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
536				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
537				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
538			>;
539		};
540
541		pinctrl_fec: fecgrp {
542			fsl,pins = <
543				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
544				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
545				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
546				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
547				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
548				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
549				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
550				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
551				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
552				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
553				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
554				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
555				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
556				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
557				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
558				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
559				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
560				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
561				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
562			>;
563		};
564
565		pinctrl_gpio_keys: gpiokeysgrp {
566			fsl,pins = <
567				MX51_PAD_EIM_A27__GPIO2_21		0x5
568			>;
569		};
570
571		pinctrl_gpio_leds: gpioledsgrp {
572			fsl,pins = <
573				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
574			>;
575		};
576
577		pinctrl_i2c1: i2c1grp {
578			fsl,pins = <
579				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
580				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
581			>;
582		};
583
584		pinctrl_i2c2: i2c2grp {
585			fsl,pins = <
586				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
587				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
588			>;
589		};
590
591		pinctrl_ipu_disp1: ipudisp1grp {
592			fsl,pins = <
593				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
594				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
595				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
596				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
597				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
598				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
599				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
600				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
601				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
602				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
603				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
604				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
605				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
606				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
607				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
608				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
609				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
610				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
611				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
612				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
613				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
614				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
615				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
616				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
617				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
618				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
619			>;
620		};
621
622		pinctrl_ipu_disp2: ipudisp2grp {
623			fsl,pins = <
624				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
625				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
626				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
627				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
628				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
629				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
630				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
631				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
632				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
633				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
634				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
635				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
636				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
637				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
638				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
639				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
640				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
641				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
642				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
643				MX51_PAD_DI_GP4__DI2_PIN15		0x5
644			>;
645		};
646
647		pinctrl_kpp: kppgrp {
648			fsl,pins = <
649				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
650				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
651				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
652				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
653				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
654				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
655				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
656				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
657			>;
658		};
659
660		pinctrl_pmic: pmicgrp {
661			fsl,pins = <
662				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
663			>;
664		};
665
666		pinctrl_uart1: uart1grp {
667			fsl,pins = <
668				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
669				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
670				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
671				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
672			>;
673		};
674
675		pinctrl_uart2: uart2grp {
676			fsl,pins = <
677				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
678				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
679			>;
680		};
681
682		pinctrl_uart3: uart3grp {
683			fsl,pins = <
684				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
685				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
686				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
687				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
688			>;
689		};
690
691		pinctrl_usbh1: usbh1grp {
692			fsl,pins = <
693				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
694				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
695				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
696				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
697				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
698				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
699				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
700				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
701				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
702				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
703				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
704			>;
705		};
706
707		pinctrl_usbh1reg: usbh1reggrp {
708			fsl,pins = <
709				MX51_PAD_EIM_D21__GPIO2_5		0x85
710			>;
711		};
712
713		pinctrl_usbotgreg: usbotgreggrp {
714			fsl,pins = <
715				MX51_PAD_GPIO1_7__GPIO1_7		0x85
716			>;
717		};
718	};
719};
720