xref: /linux/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts (revision 55d0969c451159cff86949b38c39171cab962069)
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2011 Freescale Semiconductor, Inc.
4// Copyright 2011 Linaro Ltd.
5
6/dts-v1/;
7#include "imx51.dtsi"
8
9/ {
10	model = "Freescale i.MX51 Babbage Board";
11	compatible = "fsl,imx51-babbage", "fsl,imx51";
12
13	chosen {
14		stdout-path = &uart1;
15	};
16
17	memory@90000000 {
18		device_type = "memory";
19		reg = <0x90000000 0x20000000>;
20	};
21
22	ckih1 {
23		clock-frequency = <22579200>;
24	};
25
26	clk_osc: clk-osc {
27		compatible = "fixed-clock";
28		#clock-cells = <0>;
29		clock-frequency = <26000000>;
30	};
31
32	clk_osc_gate: clk-osc-gate {
33		compatible = "gpio-gate-clock";
34		pinctrl-names = "default";
35		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
36		clocks = <&clk_osc>;
37		#clock-cells = <0>;
38		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
39	};
40
41	clk_audio: clk-audio {
42		compatible = "gpio-gate-clock";
43		pinctrl-names = "default";
44		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
45		clocks = <&clk_osc_gate>;
46		#clock-cells = <0>;
47		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
48	};
49
50	clk_usb: clk-usb {
51		compatible = "gpio-gate-clock";
52		pinctrl-names = "default";
53		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
54		clocks = <&clk_osc_gate>;
55		#clock-cells = <0>;
56		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
57	};
58
59	display1: disp1 {
60		compatible = "fsl,imx-parallel-display";
61		#address-cells = <1>;
62		#size-cells = <0>;
63		interface-pix-fmt = "rgb24";
64		pinctrl-names = "default";
65		pinctrl-0 = <&pinctrl_ipu_disp1>;
66
67		port@0 {
68		reg = <0>;
69
70			display0_in: endpoint {
71				remote-endpoint = <&ipu_di0_disp1>;
72			};
73		};
74
75		port@1 {
76			reg = <1>;
77
78			parallel_display_out: endpoint {
79				remote-endpoint = <&tfp410_in>;
80			};
81		};
82	};
83
84	display2: disp2 {
85		compatible = "fsl,imx-parallel-display";
86		interface-pix-fmt = "rgb565";
87		pinctrl-names = "default";
88		pinctrl-0 = <&pinctrl_ipu_disp2>;
89		status = "disabled";
90		display-timings {
91			native-mode = <&timing1>;
92			timing1: timing-claawvga {
93				clock-frequency = <27000000>;
94				hactive = <800>;
95				vactive = <480>;
96				hback-porch = <40>;
97				hfront-porch = <60>;
98				vback-porch = <10>;
99				vfront-porch = <10>;
100				hsync-len = <20>;
101				vsync-len = <10>;
102				hsync-active = <0>;
103				vsync-active = <0>;
104				de-active = <1>;
105				pixelclk-active = <0>;
106			};
107		};
108
109		port {
110			display1_in: endpoint {
111				remote-endpoint = <&ipu_di1_disp2>;
112			};
113		};
114	};
115
116	dvi-connector {
117		compatible = "dvi-connector";
118		digital;
119
120		port {
121			dvi_connector_in: endpoint {
122				remote-endpoint = <&tfp410_out>;
123			};
124		};
125	};
126
127	dvi-encoder {
128		compatible = "ti,tfp410";
129
130		ports {
131			#address-cells = <1>;
132			#size-cells = <0>;
133
134			port@0 {
135				reg = <0>;
136
137				tfp410_in: endpoint {
138					remote-endpoint = <&parallel_display_out>;
139				};
140			};
141
142			port@1 {
143				reg = <1>;
144
145				tfp410_out: endpoint {
146					remote-endpoint = <&dvi_connector_in>;
147				};
148			};
149		};
150	};
151
152	gpio-keys {
153		compatible = "gpio-keys";
154		pinctrl-names = "default";
155		pinctrl-0 = <&pinctrl_gpio_keys>;
156
157		key-power {
158			label = "Power Button";
159			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
160			linux,code = <KEY_POWER>;
161			wakeup-source;
162		};
163	};
164
165	leds {
166		compatible = "gpio-leds";
167		pinctrl-names = "default";
168		pinctrl-0 = <&pinctrl_gpio_leds>;
169
170		led-diagnostic {
171			label = "diagnostic";
172			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
173		};
174	};
175
176	reg_hub_reset: regulator-hub-reset {
177		compatible = "regulator-fixed";
178		pinctrl-names = "default";
179		pinctrl-0 = <&pinctrl_usbotgreg>;
180		regulator-name = "hub_reset";
181		regulator-min-microvolt = <5000000>;
182		regulator-max-microvolt = <5000000>;
183		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
184		enable-active-high;
185	};
186
187	sound {
188		compatible = "fsl,imx51-babbage-sgtl5000",
189			     "fsl,imx-audio-sgtl5000";
190		model = "imx51-babbage-sgtl5000";
191		ssi-controller = <&ssi2>;
192		audio-codec = <&sgtl5000>;
193		audio-routing =
194			"MIC_IN", "Mic Jack",
195			"Mic Jack", "Mic Bias",
196			"Headphone Jack", "HP_OUT";
197		mux-int-port = <2>;
198		mux-ext-port = <3>;
199	};
200
201	usbphy1: usbphy1 {
202		compatible = "usb-nop-xceiv";
203		pinctrl-names = "default";
204		pinctrl-0 = <&pinctrl_usbh1reg>;
205		clocks = <&clk_usb>;
206		clock-names = "main_clk";
207		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
208		vcc-supply = <&vusb_reg>;
209		#phy-cells = <0>;
210	};
211};
212
213&audmux {
214	pinctrl-names = "default";
215	pinctrl-0 = <&pinctrl_audmux>;
216	status = "okay";
217};
218
219&ecspi1 {
220	pinctrl-names = "default";
221	pinctrl-0 = <&pinctrl_ecspi1>;
222	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
223		   <&gpio4 25 GPIO_ACTIVE_LOW>;
224	status = "okay";
225
226	pmic: mc13892@0 {
227		compatible = "fsl,mc13892";
228		pinctrl-names = "default";
229		pinctrl-0 = <&pinctrl_pmic>;
230		spi-max-frequency = <6000000>;
231		spi-cs-high;
232		reg = <0>;
233		interrupt-parent = <&gpio1>;
234		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
235		fsl,mc13xxx-uses-adc;
236		fsl,mc13xxx-uses-rtc;
237
238		regulators {
239			sw1_reg: sw1 {
240				regulator-min-microvolt = <600000>;
241				regulator-max-microvolt = <1375000>;
242				regulator-boot-on;
243				regulator-always-on;
244			};
245
246			sw2_reg: sw2 {
247				regulator-min-microvolt = <900000>;
248				regulator-max-microvolt = <1850000>;
249				regulator-boot-on;
250				regulator-always-on;
251			};
252
253			sw3_reg: sw3 {
254				regulator-min-microvolt = <1100000>;
255				regulator-max-microvolt = <1850000>;
256				regulator-boot-on;
257				regulator-always-on;
258			};
259
260			sw4_reg: sw4 {
261				regulator-min-microvolt = <1100000>;
262				regulator-max-microvolt = <1850000>;
263				regulator-boot-on;
264				regulator-always-on;
265			};
266
267			vpll_reg: vpll {
268				regulator-min-microvolt = <1050000>;
269				regulator-max-microvolt = <1800000>;
270				regulator-boot-on;
271				regulator-always-on;
272			};
273
274			vdig_reg: vdig {
275				regulator-min-microvolt = <1650000>;
276				regulator-max-microvolt = <1650000>;
277				regulator-boot-on;
278			};
279
280			vsd_reg: vsd {
281				regulator-min-microvolt = <1800000>;
282				regulator-max-microvolt = <3150000>;
283			};
284
285			vusb_reg: vusb {
286				regulator-boot-on;
287			};
288
289			vusb2_reg: vusb2 {
290				regulator-min-microvolt = <2400000>;
291				regulator-max-microvolt = <2775000>;
292				regulator-boot-on;
293				regulator-always-on;
294			};
295
296			vvideo_reg: vvideo {
297				regulator-min-microvolt = <2775000>;
298				regulator-max-microvolt = <2775000>;
299			};
300
301			vaudio_reg: vaudio {
302				regulator-min-microvolt = <2300000>;
303				regulator-max-microvolt = <3000000>;
304			};
305
306			vcam_reg: vcam {
307				regulator-min-microvolt = <2500000>;
308				regulator-max-microvolt = <3000000>;
309			};
310
311			vgen1_reg: vgen1 {
312				regulator-min-microvolt = <1200000>;
313				regulator-max-microvolt = <1200000>;
314			};
315
316			vgen2_reg: vgen2 {
317				regulator-min-microvolt = <1200000>;
318				regulator-max-microvolt = <3150000>;
319				regulator-always-on;
320			};
321
322			vgen3_reg: vgen3 {
323				regulator-min-microvolt = <1800000>;
324				regulator-max-microvolt = <2900000>;
325				regulator-always-on;
326			};
327		};
328	};
329
330	flash: at45db321d@1 {
331		#address-cells = <1>;
332		#size-cells = <1>;
333		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
334		spi-max-frequency = <25000000>;
335		reg = <1>;
336
337		partition@0 {
338			label = "U-Boot";
339			reg = <0x0 0x40000>;
340			read-only;
341		};
342
343		partition@40000 {
344			label = "Kernel";
345			reg = <0x40000 0x3c0000>;
346		};
347	};
348};
349
350&esdhc1 {
351	pinctrl-names = "default";
352	pinctrl-0 = <&pinctrl_esdhc1>;
353	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
354	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
355	status = "okay";
356};
357
358&esdhc2 {
359	pinctrl-names = "default";
360	pinctrl-0 = <&pinctrl_esdhc2>;
361	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
362	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
363	status = "okay";
364};
365
366&fec {
367	pinctrl-names = "default";
368	pinctrl-0 = <&pinctrl_fec>;
369	phy-mode = "mii";
370	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
371	phy-reset-duration = <1>;
372	status = "okay";
373};
374
375&i2c1 {
376	pinctrl-names = "default";
377	pinctrl-0 = <&pinctrl_i2c1>;
378	status = "okay";
379};
380
381&i2c2 {
382	pinctrl-names = "default";
383	pinctrl-0 = <&pinctrl_i2c2>;
384	status = "okay";
385
386	sgtl5000: codec@a {
387		compatible = "fsl,sgtl5000";
388		reg = <0x0a>;
389		#sound-dai-cells = <0>;
390		clocks = <&clk_audio>;
391		VDDA-supply = <&vdig_reg>;
392		VDDIO-supply = <&vvideo_reg>;
393	};
394};
395
396&ipu_di0_disp1 {
397	remote-endpoint = <&display0_in>;
398};
399
400&ipu_di1_disp2 {
401	remote-endpoint = <&display1_in>;
402};
403
404&kpp {
405	pinctrl-names = "default";
406	pinctrl-0 = <&pinctrl_kpp>;
407	linux,keymap = <
408		MATRIX_KEY(0, 0, KEY_UP)
409		MATRIX_KEY(0, 1, KEY_DOWN)
410		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
411		MATRIX_KEY(0, 3, KEY_HOME)
412		MATRIX_KEY(1, 0, KEY_RIGHT)
413		MATRIX_KEY(1, 1, KEY_LEFT)
414		MATRIX_KEY(1, 2, KEY_ENTER)
415		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
416		MATRIX_KEY(2, 0, KEY_F6)
417		MATRIX_KEY(2, 1, KEY_F8)
418		MATRIX_KEY(2, 2, KEY_F9)
419		MATRIX_KEY(2, 3, KEY_F10)
420		MATRIX_KEY(3, 0, KEY_F1)
421		MATRIX_KEY(3, 1, KEY_F2)
422		MATRIX_KEY(3, 2, KEY_F3)
423		MATRIX_KEY(3, 3, KEY_POWER)
424	>;
425	status = "okay";
426};
427
428&pmu {
429	secure-reg-access;
430};
431
432&ssi2 {
433	status = "okay";
434};
435
436&uart1 {
437	pinctrl-names = "default";
438	pinctrl-0 = <&pinctrl_uart1>;
439	uart-has-rtscts;
440	status = "okay";
441};
442
443&uart2 {
444	pinctrl-names = "default";
445	pinctrl-0 = <&pinctrl_uart2>;
446	status = "okay";
447};
448
449&uart3 {
450	pinctrl-names = "default";
451	pinctrl-0 = <&pinctrl_uart3>;
452	uart-has-rtscts;
453	status = "okay";
454};
455
456&usbh1 {
457	pinctrl-names = "default";
458	pinctrl-0 = <&pinctrl_usbh1>;
459	vbus-supply = <&reg_hub_reset>;
460	fsl,usbphy = <&usbphy1>;
461	phy_type = "ulpi";
462	status = "okay";
463};
464
465&usbphy0 {
466	vcc-supply = <&vusb_reg>;
467};
468
469&usbotg {
470	dr_mode = "otg";
471	disable-over-current;
472	phy_type = "utmi_wide";
473	status = "okay";
474};
475
476&iomuxc {
477	pinctrl_audmux: audmuxgrp {
478		fsl,pins = <
479			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
480			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
481			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
482			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
483		>;
484	};
485
486	pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
487		fsl,pins = <
488			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
489		>;
490	};
491
492	pinctrl_clk26mhz_osc: clk26mhzoscgrp {
493		fsl,pins = <
494			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
495		>;
496	};
497
498	pinctrl_clk26mhz_usb: clk26mhzusbgrp {
499		fsl,pins = <
500			MX51_PAD_EIM_D17__GPIO2_1		0x85
501		>;
502	};
503
504	pinctrl_ecspi1: ecspi1grp {
505		fsl,pins = <
506			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
507			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
508			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
509			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
510			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
511		>;
512	};
513
514	pinctrl_esdhc1: esdhc1grp {
515		fsl,pins = <
516			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
517			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
518			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
519			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
520			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
521			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
522			MX51_PAD_GPIO1_0__GPIO1_0		0x100
523			MX51_PAD_GPIO1_1__GPIO1_1		0x100
524		>;
525	};
526
527	pinctrl_esdhc2: esdhc2grp {
528		fsl,pins = <
529			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
530			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
531			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
532			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
533			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
534			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
535			MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
536			MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
537		>;
538	};
539
540	pinctrl_fec: fecgrp {
541		fsl,pins = <
542			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
543			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
544			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
545			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
546			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
547			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
548			MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
549			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
550			MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
551			MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
552			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
553			MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
554			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
555			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
556			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
557			MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
558			MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
559			MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
560			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
561		>;
562	};
563
564	pinctrl_gpio_keys: gpiokeysgrp {
565		fsl,pins = <
566			MX51_PAD_EIM_A27__GPIO2_21		0x5
567		>;
568	};
569
570	pinctrl_gpio_leds: gpioledsgrp {
571		fsl,pins = <
572			MX51_PAD_EIM_D22__GPIO2_6		0x80000000
573		>;
574	};
575
576	pinctrl_i2c1: i2c1grp {
577		fsl,pins = <
578			MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
579			MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
580		>;
581	};
582
583	pinctrl_i2c2: i2c2grp {
584		fsl,pins = <
585			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
586			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
587		>;
588	};
589
590	pinctrl_ipu_disp1: ipudisp1grp {
591		fsl,pins = <
592			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
593			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
594			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
595			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
596			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
597			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
598			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
599			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
600			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
601			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
602			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
603			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
604			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
605			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
606			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
607			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
608			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
609			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
610			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
611			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
612			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
613			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
614			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
615			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
616			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
617			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
618		>;
619	};
620
621	pinctrl_ipu_disp2: ipudisp2grp {
622		fsl,pins = <
623			MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
624			MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
625			MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
626			MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
627			MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
628			MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
629			MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
630			MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
631			MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
632			MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
633			MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
634			MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
635			MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
636			MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
637			MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
638			MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
639			MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
640			MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
641			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
642			MX51_PAD_DI_GP4__DI2_PIN15		0x5
643		>;
644	};
645
646	pinctrl_kpp: kppgrp {
647		fsl,pins = <
648			MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
649			MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
650			MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
651			MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
652			MX51_PAD_KEY_COL0__KEY_COL0		0xe8
653			MX51_PAD_KEY_COL1__KEY_COL1		0xe8
654			MX51_PAD_KEY_COL2__KEY_COL2		0xe8
655			MX51_PAD_KEY_COL3__KEY_COL3		0xe8
656		>;
657	};
658
659	pinctrl_pmic: pmicgrp {
660		fsl,pins = <
661			MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
662		>;
663	};
664
665	pinctrl_uart1: uart1grp {
666		fsl,pins = <
667			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
668			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
669			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
670			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
671		>;
672	};
673
674	pinctrl_uart2: uart2grp {
675		fsl,pins = <
676			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
677			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
678		>;
679	};
680
681	pinctrl_uart3: uart3grp {
682		fsl,pins = <
683			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
684			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
685			MX51_PAD_EIM_D27__UART3_RTS		0x1c5
686			MX51_PAD_EIM_D24__UART3_CTS		0x1c5
687		>;
688	};
689
690	pinctrl_usbh1: usbh1grp {
691		fsl,pins = <
692			MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
693			MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
694			MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
695			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
696			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
697			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
698			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
699			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
700			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
701			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
702			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
703		>;
704	};
705
706	pinctrl_usbh1reg: usbh1reggrp {
707		fsl,pins = <
708			MX51_PAD_EIM_D21__GPIO2_5		0x85
709		>;
710	};
711
712	pinctrl_usbotgreg: usbotgreggrp {
713		fsl,pins = <
714			MX51_PAD_GPIO1_7__GPIO1_7		0x85
715		>;
716	};
717};
718