1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2013 Freescale Semiconductor, Inc. 4 5/dts-v1/; 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include "imx25.dtsi" 9 10/ { 11 model = "Freescale i.MX25 Product Development Kit"; 12 compatible = "fsl,imx25-pdk", "fsl,imx25"; 13 14 memory@80000000 { 15 device_type = "memory"; 16 reg = <0x80000000 0x4000000>; 17 }; 18 19 reg_fec_3v3: regulator-0 { 20 compatible = "regulator-fixed"; 21 regulator-name = "fec-3v3"; 22 regulator-min-microvolt = <3300000>; 23 regulator-max-microvolt = <3300000>; 24 gpio = <&gpio2 3 0>; 25 enable-active-high; 26 }; 27 28 reg_2p5v: regulator-1 { 29 compatible = "regulator-fixed"; 30 regulator-name = "2P5V"; 31 regulator-min-microvolt = <2500000>; 32 regulator-max-microvolt = <2500000>; 33 }; 34 35 reg_3p3v: regulator-2 { 36 compatible = "regulator-fixed"; 37 regulator-name = "3P3V"; 38 regulator-min-microvolt = <3300000>; 39 regulator-max-microvolt = <3300000>; 40 }; 41 42 reg_can_3v3: regulator-3 { 43 compatible = "regulator-fixed"; 44 regulator-name = "can-3v3"; 45 regulator-min-microvolt = <3300000>; 46 regulator-max-microvolt = <3300000>; 47 gpio = <&gpio4 6 0>; 48 }; 49 50 sound { 51 compatible = "fsl,imx25-pdk-sgtl5000", 52 "fsl,imx-audio-sgtl5000"; 53 model = "imx25-pdk-sgtl5000"; 54 ssi-controller = <&ssi1>; 55 audio-codec = <&codec>; 56 audio-routing = 57 "MIC_IN", "Mic Jack", 58 "Mic Jack", "Mic Bias", 59 "Headphone Jack", "HP_OUT"; 60 mux-int-port = <1>; 61 mux-ext-port = <4>; 62 }; 63 64 wvga: display { 65 model = "CLAA057VC01CW"; 66 bits-per-pixel = <16>; 67 fsl,pcr = <0xfa208b80>; 68 bus-width = <18>; 69 display-timings { 70 native-mode = <&wvga_timings>; 71 wvga_timings: 640x480 { 72 hactive = <640>; 73 vactive = <480>; 74 hback-porch = <45>; 75 hfront-porch = <114>; 76 hsync-len = <1>; 77 vback-porch = <33>; 78 vfront-porch = <11>; 79 vsync-len = <1>; 80 clock-frequency = <25200000>; 81 }; 82 }; 83 }; 84}; 85 86&audmux { 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_audmux>; 89 status = "okay"; 90}; 91 92&can1 { 93 pinctrl-names = "default"; 94 pinctrl-0 = <&pinctrl_can1>; 95 xceiver-supply = <®_can_3v3>; 96 status = "okay"; 97}; 98 99&esdhc1 { 100 pinctrl-names = "default"; 101 pinctrl-0 = <&pinctrl_esdhc1>; 102 cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 103 wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; 104 status = "okay"; 105}; 106 107&fec { 108 phy-mode = "rmii"; 109 pinctrl-names = "default"; 110 pinctrl-0 = <&pinctrl_fec>; 111 phy-supply = <®_fec_3v3>; 112 phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; 113 status = "okay"; 114}; 115 116&i2c1 { 117 clock-frequency = <100000>; 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_i2c1>; 120 status = "okay"; 121 122 codec: sgtl5000@a { 123 compatible = "fsl,sgtl5000"; 124 reg = <0x0a>; 125 clocks = <&clks 129>; 126 VDDA-supply = <®_2p5v>; 127 VDDIO-supply = <®_3p3v>; 128 }; 129}; 130 131&iomuxc { 132 imx25-pdk { 133 pinctrl_audmux: audmuxgrp { 134 fsl,pins = < 135 MX25_PAD_RW__AUD4_TXFS 0xe0 136 MX25_PAD_OE__AUD4_TXC 0xe0 137 MX25_PAD_EB0__AUD4_TXD 0xe0 138 MX25_PAD_EB1__AUD4_RXD 0xe0 139 >; 140 }; 141 142 pinctrl_can1: can1grp { 143 fsl,pins = < 144 MX25_PAD_GPIO_A__CAN1_TX 0x0 145 MX25_PAD_GPIO_B__CAN1_RX 0x0 146 MX25_PAD_D14__GPIO_4_6 0x80000000 147 >; 148 }; 149 150 pinctrl_esdhc1: esdhc1grp { 151 fsl,pins = < 152 MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 153 MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 154 MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 155 MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 156 MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 157 MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 158 MX25_PAD_A14__GPIO_2_0 0x80000000 159 MX25_PAD_A15__GPIO_2_1 0x80000000 160 >; 161 }; 162 163 pinctrl_fec: fecgrp { 164 fsl,pins = < 165 MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 166 MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 167 MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 168 MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 169 MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 170 MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 171 MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 172 MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 173 MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 174 MX25_PAD_A17__GPIO_2_3 0x80000000 175 MX25_PAD_D12__GPIO_4_8 0x80000000 176 >; 177 }; 178 179 pinctrl_i2c1: i2c1grp { 180 fsl,pins = < 181 MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 182 MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 183 >; 184 }; 185 186 pinctrl_kpp: kppgrp { 187 fsl,pins = < 188 MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 189 MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 190 MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 191 MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 192 MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 193 MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 194 MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 195 MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 196 >; 197 }; 198 199 pinctrl_lcd: lcdgrp { 200 fsl,pins = < 201 MX25_PAD_LD0__LD0 0xe0 202 MX25_PAD_LD1__LD1 0xe0 203 MX25_PAD_LD2__LD2 0xe0 204 MX25_PAD_LD3__LD3 0xe0 205 MX25_PAD_LD4__LD4 0xe0 206 MX25_PAD_LD5__LD5 0xe0 207 MX25_PAD_LD6__LD6 0xe0 208 MX25_PAD_LD7__LD7 0xe0 209 MX25_PAD_LD8__LD8 0xe0 210 MX25_PAD_LD9__LD9 0xe0 211 MX25_PAD_LD10__LD10 0xe0 212 MX25_PAD_LD11__LD11 0xe0 213 MX25_PAD_LD12__LD12 0xe0 214 MX25_PAD_LD13__LD13 0xe0 215 MX25_PAD_LD14__LD14 0xe0 216 MX25_PAD_LD15__LD15 0xe0 217 MX25_PAD_GPIO_E__LD16 0xe0 218 MX25_PAD_GPIO_F__LD17 0xe0 219 MX25_PAD_HSYNC__HSYNC 0xe0 220 MX25_PAD_VSYNC__VSYNC 0xe0 221 MX25_PAD_LSCLK__LSCLK 0xe0 222 MX25_PAD_OE_ACD__OE_ACD 0xe0 223 MX25_PAD_CONTRAST__CONTRAST 0xe0 224 >; 225 }; 226 227 pinctrl_uart1: uart1grp { 228 fsl,pins = < 229 MX25_PAD_UART1_RTS__UART1_RTS 0xe0 230 MX25_PAD_UART1_CTS__UART1_CTS 0xe0 231 MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 232 MX25_PAD_UART1_RXD__UART1_RXD 0xc0 233 >; 234 }; 235 }; 236}; 237 238&lcdc { 239 display = <&wvga>; 240 fsl,lpccr = <0x00a903ff>; 241 fsl,lscr1 = <0x00120300>; 242 fsl,dmacr = <0x00020010>; 243 pinctrl-names = "default"; 244 pinctrl-0 = <&pinctrl_lcd>; 245 status = "okay"; 246}; 247 248&nfc { 249 nand-on-flash-bbt; 250 status = "okay"; 251}; 252 253&kpp { 254 pinctrl-names = "default"; 255 pinctrl-0 = <&pinctrl_kpp>; 256 linux,keymap = < 257 MATRIX_KEY(0x0, 0x0, KEY_UP) 258 MATRIX_KEY(0x0, 0x1, KEY_DOWN) 259 MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) 260 MATRIX_KEY(0x0, 0x3, KEY_HOME) 261 MATRIX_KEY(0x1, 0x0, KEY_RIGHT) 262 MATRIX_KEY(0x1, 0x1, KEY_LEFT) 263 MATRIX_KEY(0x1, 0x2, KEY_ENTER) 264 MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) 265 MATRIX_KEY(0x2, 0x0, KEY_F6) 266 MATRIX_KEY(0x2, 0x1, KEY_F8) 267 MATRIX_KEY(0x2, 0x2, KEY_F9) 268 MATRIX_KEY(0x2, 0x3, KEY_F10) 269 MATRIX_KEY(0x3, 0x0, KEY_F1) 270 MATRIX_KEY(0x3, 0x1, KEY_F2) 271 MATRIX_KEY(0x3, 0x2, KEY_F3) 272 MATRIX_KEY(0x3, 0x2, KEY_POWER) 273 >; 274 status = "okay"; 275}; 276 277&ssi1 { 278 status = "okay"; 279}; 280 281&tsc { 282 status = "okay"; 283}; 284 285&tscadc { 286 status = "okay"; 287}; 288 289&uart1 { 290 pinctrl-names = "default"; 291 pinctrl-0 = <&pinctrl_uart1>; 292 uart-has-rtscts; 293 status = "okay"; 294}; 295 296&usbhost1 { 297 status = "okay"; 298}; 299 300&usbotg { 301 external-vbus-divider; 302 status = "okay"; 303}; 304