xref: /linux/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/input/input.h>
3#include <dt-bindings/thermal/thermal.h>
4#include "tegra30.dtsi"
5#include "tegra30-cpu-opp.dtsi"
6#include "tegra30-cpu-opp-microvolt.dtsi"
7
8/**
9 * This file contains common DT entry for all fab version of Cardhu.
10 * There is multiple fab version of Cardhu starting from A01 to A07.
11 * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
12 * A02 will have different sets of GPIOs for fixed regulator compare to
13 * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
14 * compatible with fab version A04. Based on Cardhu fab version, the
15 * related dts file need to be chosen like for Cardhu fab version A02,
16 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
17 * tegra30-cardhu-a04.dts.
18 * The identification of board is done in two ways, by looking the sticker
19 * on PCB and by reading board id eeprom.
20 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
21 * number is the fab version like here it is 002 and hence fab version A02.
22 * The (downstream internal) U-Boot of Cardhu display the board-id as
23 * follows:
24 * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
25 * In this Fab version is 02 i.e. A02.
26 * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
27 * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
28 * wide.
29 */
30
31/ {
32	model = "NVIDIA Tegra30 Cardhu evaluation board";
33	compatible = "nvidia,cardhu", "nvidia,tegra30";
34
35	aliases {
36		rtc0 = "/i2c@7000d000/tps65911@2d";
37		rtc1 = "/rtc@7000e000";
38		serial0 = &uarta;
39		serial1 = &uartc;
40	};
41
42	chosen {
43		stdout-path = "serial0:115200n8";
44	};
45
46	memory@80000000 {
47		reg = <0x80000000 0x40000000>;
48	};
49
50	pcie@3000 {
51		status = "okay";
52
53		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
54		avdd-pexb-supply = <&ldo1_reg>;
55		vdd-pexb-supply = <&ldo1_reg>;
56		avdd-pex-pll-supply = <&ldo1_reg>;
57		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
58		vddio-pex-ctl-supply = <&sys_3v3_reg>;
59		avdd-plle-supply = <&ldo2_reg>;
60
61		pci@1,0 {
62			nvidia,num-lanes = <4>;
63		};
64
65		pci@2,0 {
66			nvidia,num-lanes = <1>;
67		};
68
69		pci@3,0 {
70			status = "okay";
71			nvidia,num-lanes = <1>;
72		};
73	};
74
75	host1x@50000000 {
76		dc@54200000 {
77			rgb {
78				status = "okay";
79
80				nvidia,panel = <&panel>;
81			};
82		};
83	};
84
85	pinmux@70000868 {
86		pinctrl-names = "default";
87		pinctrl-0 = <&state_default>;
88
89		state_default: pinmux {
90			sdmmc1_clk_pz0 {
91				nvidia,pins = "sdmmc1_clk_pz0";
92				nvidia,function = "sdmmc1";
93				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
94				nvidia,tristate = <TEGRA_PIN_DISABLE>;
95			};
96			sdmmc1_cmd_pz1 {
97				nvidia,pins =	"sdmmc1_cmd_pz1",
98						"sdmmc1_dat0_py7",
99						"sdmmc1_dat1_py6",
100						"sdmmc1_dat2_py5",
101						"sdmmc1_dat3_py4";
102				nvidia,function = "sdmmc1";
103				nvidia,pull = <TEGRA_PIN_PULL_UP>;
104				nvidia,tristate = <TEGRA_PIN_DISABLE>;
105			};
106			sdmmc3_clk_pa6 {
107				nvidia,pins = "sdmmc3_clk_pa6";
108				nvidia,function = "sdmmc3";
109				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
110				nvidia,tristate = <TEGRA_PIN_DISABLE>;
111			};
112			sdmmc3_cmd_pa7 {
113				nvidia,pins =	"sdmmc3_cmd_pa7",
114						"sdmmc3_dat0_pb7",
115						"sdmmc3_dat1_pb6",
116						"sdmmc3_dat2_pb5",
117						"sdmmc3_dat3_pb4";
118				nvidia,function = "sdmmc3";
119				nvidia,pull = <TEGRA_PIN_PULL_UP>;
120				nvidia,tristate = <TEGRA_PIN_DISABLE>;
121			};
122			sdmmc4_clk_pcc4 {
123				nvidia,pins =	"sdmmc4_clk_pcc4",
124						"sdmmc4_rst_n_pcc3";
125				nvidia,function = "sdmmc4";
126				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
127				nvidia,tristate = <TEGRA_PIN_DISABLE>;
128			};
129			sdmmc4_dat0_paa0 {
130				nvidia,pins =	"sdmmc4_dat0_paa0",
131						"sdmmc4_dat1_paa1",
132						"sdmmc4_dat2_paa2",
133						"sdmmc4_dat3_paa3",
134						"sdmmc4_dat4_paa4",
135						"sdmmc4_dat5_paa5",
136						"sdmmc4_dat6_paa6",
137						"sdmmc4_dat7_paa7";
138				nvidia,function = "sdmmc4";
139				nvidia,pull = <TEGRA_PIN_PULL_UP>;
140				nvidia,tristate = <TEGRA_PIN_DISABLE>;
141			};
142			dap2_fs_pa2 {
143				nvidia,pins =	"dap2_fs_pa2",
144						"dap2_sclk_pa3",
145						"dap2_din_pa4",
146						"dap2_dout_pa5";
147				nvidia,function = "i2s1";
148				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
149				nvidia,tristate = <TEGRA_PIN_DISABLE>;
150			};
151			sdio3 {
152				nvidia,pins = "drive_sdio3";
153				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
154				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
155				nvidia,pull-down-strength = <46>;
156				nvidia,pull-up-strength = <42>;
157				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
158				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
159			};
160			uart3_txd_pw6 {
161				nvidia,pins =	"uart3_txd_pw6",
162						"uart3_cts_n_pa1",
163						"uart3_rts_n_pc0",
164						"uart3_rxd_pw7";
165				nvidia,function = "uartc";
166				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
167				nvidia,tristate = <TEGRA_PIN_DISABLE>;
168			};
169		};
170	};
171
172	serial@70006000 {
173		/delete-property/ dmas;
174		/delete-property/ dma-names;
175		status = "okay";
176	};
177
178	serial@70006200 {
179		compatible = "nvidia,tegra30-hsuart";
180		reset-names = "serial";
181		/delete-property/ reg-shift;
182		status = "okay";
183	};
184
185	pwm@7000a000 {
186		status = "okay";
187	};
188
189	panelddc: i2c@7000c000 {
190		status = "okay";
191		clock-frequency = <100000>;
192	};
193
194	i2c@7000c400 {
195		status = "okay";
196		clock-frequency = <100000>;
197	};
198
199	i2c@7000c500 {
200		status = "okay";
201		clock-frequency = <100000>;
202
203		/* ALS and Proximity sensor */
204		isl29028@44 {
205			compatible = "isil,isl29028";
206			reg = <0x44>;
207			interrupt-parent = <&gpio>;
208			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
209		};
210
211		i2cmux@70 {
212			compatible = "nxp,pca9546";
213			#address-cells = <1>;
214			#size-cells = <0>;
215			reg = <0x70>;
216			reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
217		};
218	};
219
220	i2c@7000c700 {
221		status = "okay";
222		clock-frequency = <100000>;
223	};
224
225	i2c@7000d000 {
226		status = "okay";
227		clock-frequency = <100000>;
228
229		wm8903: wm8903@1a {
230			compatible = "wlf,wm8903";
231			reg = <0x1a>;
232			interrupt-parent = <&gpio>;
233			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
234
235			gpio-controller;
236			#gpio-cells = <2>;
237
238			micdet-cfg = <0>;
239			micdet-delay = <100>;
240			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
241		};
242
243		pmic: tps65911@2d {
244			compatible = "ti,tps65911";
245			reg = <0x2d>;
246
247			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
248			#interrupt-cells = <2>;
249			interrupt-controller;
250			wakeup-source;
251
252			ti,system-power-controller;
253
254			#gpio-cells = <2>;
255			gpio-controller;
256
257			vcc1-supply = <&vdd_ac_bat_reg>;
258			vcc2-supply = <&vdd_ac_bat_reg>;
259			vcc3-supply = <&vio_reg>;
260			vcc4-supply = <&vdd_5v0_reg>;
261			vcc5-supply = <&vdd_ac_bat_reg>;
262			vcc6-supply = <&vdd2_reg>;
263			vcc7-supply = <&vdd_ac_bat_reg>;
264			vccio-supply = <&vdd_ac_bat_reg>;
265
266			regulators {
267				vdd1_reg: vdd1 {
268					regulator-name = "vddio_ddr_1v2";
269					regulator-min-microvolt = <1200000>;
270					regulator-max-microvolt = <1200000>;
271					regulator-always-on;
272				};
273
274				vdd2_reg: vdd2 {
275					regulator-name = "vdd_1v5_gen";
276					regulator-min-microvolt = <1500000>;
277					regulator-max-microvolt = <1500000>;
278					regulator-always-on;
279				};
280
281				vddctrl_reg: vddctrl {
282					regulator-name = "vdd_cpu,vdd_sys";
283					regulator-min-microvolt = <800000>;
284					regulator-max-microvolt = <1250000>;
285					regulator-coupled-with = <&vdd_core>;
286					regulator-coupled-max-spread = <300000>;
287					regulator-max-step-microvolt = <100000>;
288					regulator-always-on;
289
290					nvidia,tegra-cpu-regulator;
291				};
292
293				vio_reg: vio {
294					regulator-name = "vdd_1v8_gen";
295					regulator-min-microvolt = <1800000>;
296					regulator-max-microvolt = <1800000>;
297					regulator-always-on;
298				};
299
300				ldo1_reg: ldo1 {
301					regulator-name = "vdd_pexa,vdd_pexb";
302					regulator-min-microvolt = <1050000>;
303					regulator-max-microvolt = <1050000>;
304				};
305
306				ldo2_reg: ldo2 {
307					regulator-name = "vdd_sata,avdd_plle";
308					regulator-min-microvolt = <1050000>;
309					regulator-max-microvolt = <1050000>;
310				};
311
312				/* LDO3 is not connected to anything */
313
314				ldo4_reg: ldo4 {
315					regulator-name = "vdd_rtc";
316					regulator-min-microvolt = <1200000>;
317					regulator-max-microvolt = <1200000>;
318					regulator-always-on;
319				};
320
321				ldo5_reg: ldo5 {
322					regulator-name = "vddio_sdmmc,avdd_vdac";
323					regulator-min-microvolt = <3300000>;
324					regulator-max-microvolt = <3300000>;
325					regulator-always-on;
326				};
327
328				ldo6_reg: ldo6 {
329					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
330					regulator-min-microvolt = <1200000>;
331					regulator-max-microvolt = <1200000>;
332				};
333
334				ldo7_reg: ldo7 {
335					regulator-name = "vdd_pllm,x,u,a_p_c_s";
336					regulator-min-microvolt = <1200000>;
337					regulator-max-microvolt = <1200000>;
338					regulator-always-on;
339				};
340
341				ldo8_reg: ldo8 {
342					regulator-name = "vdd_ddr_hs";
343					regulator-min-microvolt = <1000000>;
344					regulator-max-microvolt = <1000000>;
345					regulator-always-on;
346				};
347			};
348		};
349
350		nct1008: temperature-sensor@4c {
351			compatible = "onnn,nct1008";
352			reg = <0x4c>;
353			vcc-supply = <&sys_3v3_reg>;
354			interrupt-parent = <&gpio>;
355			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
356			#thermal-sensor-cells = <1>;
357		};
358
359		vdd_core: tps62361@60 {
360			compatible = "ti,tps62361";
361			reg = <0x60>;
362
363			regulator-name = "tps62361-vout";
364			regulator-min-microvolt = <500000>;
365			regulator-max-microvolt = <1500000>;
366			regulator-coupled-with = <&vddctrl_reg>;
367			regulator-coupled-max-spread = <300000>;
368			regulator-max-step-microvolt = <100000>;
369			regulator-boot-on;
370			regulator-always-on;
371			ti,vsel0-state-high;
372			ti,vsel1-state-high;
373
374			nvidia,tegra-core-regulator;
375		};
376	};
377
378	spi@7000da00 {
379		status = "okay";
380		spi-max-frequency = <25000000>;
381
382		flash@1 {
383			compatible = "winbond,w25q32", "jedec,spi-nor";
384			reg = <1>;
385			spi-max-frequency = <20000000>;
386		};
387	};
388
389	pmc@7000e400 {
390		status = "okay";
391		nvidia,invert-interrupt;
392		nvidia,suspend-mode = <1>;
393		nvidia,cpu-pwr-good-time = <2000>;
394		nvidia,cpu-pwr-off-time = <200>;
395		nvidia,core-pwr-good-time = <3845 3845>;
396		nvidia,core-pwr-off-time = <0>;
397		nvidia,core-power-req-active-high;
398		nvidia,sys-clock-req-active-high;
399		core-supply = <&vdd_core>;
400	};
401
402	ahub@70080000 {
403		i2s@70080400 {
404			status = "okay";
405		};
406	};
407
408	mmc@78000000 {
409		status = "okay";
410		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
411		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
412		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
413		bus-width = <4>;
414	};
415
416	mmc@78000600 {
417		status = "okay";
418		bus-width = <8>;
419		non-removable;
420	};
421
422	usb@7d008000 {
423		status = "okay";
424	};
425
426	usb-phy@7d008000 {
427		vbus-supply = <&usb3_vbus_reg>;
428		status = "okay";
429	};
430
431	backlight: backlight {
432		compatible = "pwm-backlight";
433
434		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
435		power-supply = <&vdd_bl_reg>;
436		pwms = <&pwm 0 5000000>;
437
438		brightness-levels = <0 4 8 16 32 64 128 255>;
439		default-brightness-level = <6>;
440	};
441
442	clk32k_in: clock-32k {
443		compatible = "fixed-clock";
444		clock-frequency = <32768>;
445		#clock-cells = <0>;
446	};
447
448	cpus {
449		cpu0: cpu@0 {
450			cpu-supply = <&vddctrl_reg>;
451			operating-points-v2 = <&cpu0_opp_table>;
452			#cooling-cells = <2>;
453		};
454
455		cpu1: cpu@1 {
456			cpu-supply = <&vddctrl_reg>;
457			operating-points-v2 = <&cpu0_opp_table>;
458			#cooling-cells = <2>;
459		};
460
461		cpu2: cpu@2 {
462			cpu-supply = <&vddctrl_reg>;
463			operating-points-v2 = <&cpu0_opp_table>;
464			#cooling-cells = <2>;
465		};
466
467		cpu3: cpu@3 {
468			cpu-supply = <&vddctrl_reg>;
469			operating-points-v2 = <&cpu0_opp_table>;
470			#cooling-cells = <2>;
471		};
472	};
473
474	gpio-keys {
475		compatible = "gpio-keys";
476
477		key-power {
478			label = "Power";
479			interrupt-parent = <&pmic>;
480			interrupts = <2 0>;
481			linux,code = <KEY_POWER>;
482			debounce-interval = <100>;
483			wakeup-source;
484		};
485
486		key-volume-down {
487			label = "Volume Down";
488			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
489			linux,code = <KEY_VOLUMEDOWN>;
490			debounce-interval = <10>;
491		};
492
493		key-volume-up {
494			label = "Volume Up";
495			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
496			linux,code = <KEY_VOLUMEUP>;
497			debounce-interval = <10>;
498		};
499	};
500
501	panel: panel {
502		compatible = "chunghwa,claa101wb01";
503		ddc-i2c-bus = <&panelddc>;
504
505		power-supply = <&vdd_pnl1_reg>;
506		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
507
508		backlight = <&backlight>;
509	};
510
511	vdd_ac_bat_reg: regulator-acbat {
512		compatible = "regulator-fixed";
513		regulator-name = "vdd_ac_bat";
514		regulator-min-microvolt = <5000000>;
515		regulator-max-microvolt = <5000000>;
516		regulator-always-on;
517	};
518
519	cam_1v8_reg: regulator-cam {
520		compatible = "regulator-fixed";
521		regulator-name = "cam_1v8";
522		regulator-min-microvolt = <1800000>;
523		regulator-max-microvolt = <1800000>;
524		enable-active-high;
525		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
526		vin-supply = <&vio_reg>;
527	};
528
529	cp_5v_reg: regulator-5v0cp {
530		compatible = "regulator-fixed";
531		regulator-name = "cp_5v";
532		regulator-min-microvolt = <5000000>;
533		regulator-max-microvolt = <5000000>;
534		regulator-boot-on;
535		regulator-always-on;
536		enable-active-high;
537		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
538	};
539
540	emmc_3v3_reg: regulator-emmc {
541		compatible = "regulator-fixed";
542		regulator-name = "emmc_3v3";
543		regulator-min-microvolt = <3300000>;
544		regulator-max-microvolt = <3300000>;
545		regulator-always-on;
546		regulator-boot-on;
547		enable-active-high;
548		gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
549		vin-supply = <&sys_3v3_reg>;
550	};
551
552	modem_3v3_reg: regulator-modem {
553		compatible = "regulator-fixed";
554		regulator-name = "modem_3v3";
555		regulator-min-microvolt = <3300000>;
556		regulator-max-microvolt = <3300000>;
557		enable-active-high;
558		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
559	};
560
561	pex_hvdd_3v3_reg: regulator-pex {
562		compatible = "regulator-fixed";
563		regulator-name = "pex_hvdd_3v3";
564		regulator-min-microvolt = <3300000>;
565		regulator-max-microvolt = <3300000>;
566		enable-active-high;
567		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
568		vin-supply = <&sys_3v3_reg>;
569	};
570
571	vdd_cam1_ldo_reg: regulator-cam1 {
572		compatible = "regulator-fixed";
573		regulator-name = "vdd_cam1_ldo";
574		regulator-min-microvolt = <2800000>;
575		regulator-max-microvolt = <2800000>;
576		enable-active-high;
577		gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
578		vin-supply = <&sys_3v3_reg>;
579	};
580
581	vdd_cam2_ldo_reg: regulator-cam2 {
582		compatible = "regulator-fixed";
583		regulator-name = "vdd_cam2_ldo";
584		regulator-min-microvolt = <2800000>;
585		regulator-max-microvolt = <2800000>;
586		enable-active-high;
587		gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
588		vin-supply = <&sys_3v3_reg>;
589	};
590
591	vdd_cam3_ldo_reg: regulator-cam3 {
592		compatible = "regulator-fixed";
593		regulator-name = "vdd_cam3_ldo";
594		regulator-min-microvolt = <3300000>;
595		regulator-max-microvolt = <3300000>;
596		enable-active-high;
597		gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
598		vin-supply = <&sys_3v3_reg>;
599	};
600
601	vdd_com_reg: regulator-com {
602		compatible = "regulator-fixed";
603		regulator-name = "vdd_com";
604		regulator-min-microvolt = <3300000>;
605		regulator-max-microvolt = <3300000>;
606		regulator-always-on;
607		regulator-boot-on;
608		enable-active-high;
609		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
610		vin-supply = <&sys_3v3_reg>;
611	};
612
613	vdd_fuse_3v3_reg: regulator-fuse {
614		compatible = "regulator-fixed";
615		regulator-name = "vdd_fuse_3v3";
616		regulator-min-microvolt = <3300000>;
617		regulator-max-microvolt = <3300000>;
618		enable-active-high;
619		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
620		vin-supply = <&sys_3v3_reg>;
621	};
622
623	vdd_pnl1_reg: regulator-pnl1 {
624		compatible = "regulator-fixed";
625		regulator-name = "vdd_pnl1";
626		regulator-min-microvolt = <3300000>;
627		regulator-max-microvolt = <3300000>;
628		regulator-always-on;
629		regulator-boot-on;
630		enable-active-high;
631		gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
632		vin-supply = <&sys_3v3_reg>;
633	};
634
635	vdd_vid_reg: regulator-vid {
636		compatible = "regulator-fixed";
637		regulator-name = "vddio_vid";
638		regulator-min-microvolt = <5000000>;
639		regulator-max-microvolt = <5000000>;
640		enable-active-high;
641		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
642		gpio-open-drain;
643		vin-supply = <&vdd_5v0_reg>;
644	};
645
646	sound {
647		compatible = "nvidia,tegra-audio-wm8903-cardhu",
648			     "nvidia,tegra-audio-wm8903";
649		nvidia,model = "NVIDIA Tegra Cardhu";
650
651		nvidia,audio-routing =
652			"Headphone Jack", "HPOUTR",
653			"Headphone Jack", "HPOUTL",
654			"Int Spk", "ROP",
655			"Int Spk", "RON",
656			"Int Spk", "LOP",
657			"Int Spk", "LON",
658			"Mic Jack", "MICBIAS",
659			"IN1L", "Mic Jack";
660
661		nvidia,i2s-controller = <&tegra_i2s1>;
662		nvidia,audio-codec = <&wm8903>;
663
664		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
665		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
666			GPIO_ACTIVE_LOW>;
667
668		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
669			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
670			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
671		clock-names = "pll_a", "pll_a_out0", "mclk";
672
673		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
674				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
675
676		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
677					 <&tegra_car TEGRA30_CLK_EXTERN1>;
678	};
679
680	thermal-zones {
681		cpu-thermal {
682			polling-delay-passive = <1000>; /* milliseconds */
683			polling-delay = <5000>; /* milliseconds */
684
685			thermal-sensors = <&nct1008 1>;
686
687			trips {
688				trip0: cpu-alert0 {
689					/* throttle at 57C until temperature drops to 56.8C */
690					temperature = <57000>;
691					hysteresis = <200>;
692					type = "passive";
693				};
694
695				trip1: cpu-crit {
696					/* shut down at 60C */
697					temperature = <60000>;
698					hysteresis = <2000>;
699					type = "critical";
700				};
701			};
702
703			cooling-maps {
704				map0 {
705					trip = <&trip0>;
706					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
707							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
708							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
709							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
710				};
711			};
712		};
713	};
714};
715