xref: /linux/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi (revision d27bb0246e5356dbef4d923e72c680bf893885a8)
1// SPDX-License-Identifier: GPL-2.0
2#include "tegra20.dtsi"
3
4/*
5 * Toradex Colibri T20 Module Device Tree
6 * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
7 * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
8 * Colibri T20 512MB IT V1.2A
9 */
10/ {
11	memory@0 {
12		/*
13		 * Set memory to 256 MB to be safe as this could be used on
14		 * 256 or 512 MB module. It is expected from bootloader
15		 * to fix this up for 512 MB version.
16		 */
17		reg = <0x00000000 0x10000000>;
18	};
19
20	host1x@50000000 {
21		hdmi@54280000 {
22			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
23			nvidia,hpd-gpio =
24				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
25			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
26			vdd-supply = <&reg_3v3_avdd_hdmi>;
27		};
28	};
29
30	gpio@6000d000 {
31		lan-reset-n-hog {
32			gpio-hog;
33			gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
34			output-high;
35			line-name = "LAN_RESET#";
36		};
37
38		/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
39		npwe-hog {
40			gpio-hog;
41			gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
42			output-high;
43			line-name = "Tri-state nPWE";
44		};
45
46		/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
47		rdnwr-hog {
48			gpio-hog;
49			gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
50			output-low;
51			line-name = "Not tri-state RDnWR";
52		};
53	};
54
55	pinmux@70000014 {
56		pinctrl-names = "default";
57		pinctrl-0 = <&state_default>;
58
59		state_default: pinmux {
60			/* Analogue Audio AC97 to WM9712 (On-module) */
61			audio-refclk {
62				nvidia,pins = "cdev1";
63				nvidia,function = "plla_out";
64				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
65				nvidia,tristate = <TEGRA_PIN_DISABLE>;
66			};
67			dap3 {
68				nvidia,pins = "dap3";
69				nvidia,function = "dap3";
70				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
71				nvidia,tristate = <TEGRA_PIN_DISABLE>;
72			};
73
74			/*
75			 * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
76			 * (All on-module), SODIMM Pin 45 Wakeup
77			 */
78			gpio-uac {
79				nvidia,pins = "uac";
80				nvidia,function = "rsvd2";
81				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
82				nvidia,tristate = <TEGRA_PIN_DISABLE>;
83			};
84
85			/*
86			 * Buffer Enables for nPWE and RDnWR (On-module,
87			 * see GPIO hogging further down below)
88			 */
89			gpio-pta {
90				nvidia,pins = "pta";
91				nvidia,function = "rsvd4";
92				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
93				nvidia,tristate = <TEGRA_PIN_DISABLE>;
94			};
95
96			/*
97			 * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
98			 * SYS_CLK_REQ (All on-module)
99			 */
100			pmc {
101				nvidia,pins = "pmc";
102				nvidia,function = "pwr_on";
103				nvidia,tristate = <TEGRA_PIN_DISABLE>;
104			};
105
106			/*
107			 * Colibri Address/Data Bus (GMI)
108			 * Note: spid and spie optionally used for SPI1
109			 */
110			gmi {
111				nvidia,pins = "atc", "atd", "ate", "dap1",
112					      "dap2", "dap4", "gmd", "gpu",
113					      "irrx", "irtx", "spia", "spib",
114					      "spic", "spid", "spie", "uca",
115					      "ucb";
116				nvidia,function = "gmi";
117				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
118				nvidia,tristate = <TEGRA_PIN_ENABLE>;
119			};
120			/* Further pins may be used as GPIOs */
121			gmi-gpio1 {
122				nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
123				nvidia,function = "hdmi";
124				nvidia,tristate = <TEGRA_PIN_ENABLE>;
125			};
126			gmi-gpio2 {
127				nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
128				nvidia,function = "rsvd4";
129				nvidia,tristate = <TEGRA_PIN_ENABLE>;
130			};
131
132			/* Colibri BL_ON */
133			bl-on {
134				nvidia,pins = "dta";
135				nvidia,function = "rsvd1";
136				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
137				nvidia,tristate = <TEGRA_PIN_ENABLE>;
138			};
139
140			/* Colibri Backlight PWM<A>, PWM<B> */
141			sdc {
142				nvidia,pins = "sdc";
143				nvidia,function = "pwm";
144				nvidia,tristate = <TEGRA_PIN_ENABLE>;
145			};
146
147			/* Colibri DDC */
148			ddc {
149				nvidia,pins = "ddc";
150				nvidia,function = "i2c2";
151				nvidia,pull = <TEGRA_PIN_PULL_UP>;
152				nvidia,tristate = <TEGRA_PIN_ENABLE>;
153			};
154
155			/*
156			 * Colibri EXT_IO*
157			 * Note: dtf optionally used for I2C3
158			 */
159			ext-io {
160				nvidia,pins = "dtf", "spdi";
161				nvidia,function = "rsvd2";
162				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
163				nvidia,tristate = <TEGRA_PIN_ENABLE>;
164			};
165
166			/*
167			 * Colibri Ethernet (On-module)
168			 * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
169			 */
170			ulpi {
171				nvidia,pins = "uaa", "uab", "uda";
172				nvidia,function = "ulpi";
173				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
174				nvidia,tristate = <TEGRA_PIN_DISABLE>;
175			};
176			ulpi-refclk {
177				nvidia,pins = "cdev2";
178				nvidia,function = "pllp_out4";
179				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
180				nvidia,tristate = <TEGRA_PIN_DISABLE>;
181			};
182
183			/* Colibri HOTPLUG_DETECT (HDMI) */
184			hotplug-detect {
185				nvidia,pins = "hdint";
186				nvidia,function = "hdmi";
187				nvidia,tristate = <TEGRA_PIN_ENABLE>;
188			};
189
190			/* Colibri I2C */
191			i2c {
192				nvidia,pins = "rm";
193				nvidia,function = "i2c1";
194				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
195				nvidia,tristate = <TEGRA_PIN_ENABLE>;
196			};
197
198			/*
199			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
200			 * today's display need DE, disable LCD_M1
201			 */
202			lm1 {
203				nvidia,pins = "lm1";
204				nvidia,function = "rsvd3";
205				nvidia,tristate = <TEGRA_PIN_ENABLE>;
206			};
207
208			/* Colibri LCD (L_* resp. LDD<*>) */
209			lcd {
210				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
211					      "ld4", "ld5", "ld6", "ld7",
212					      "ld8", "ld9", "ld10", "ld11",
213					      "ld12", "ld13", "ld14", "ld15",
214					      "ld16", "ld17", "lhs", "lsc0",
215					      "lspi", "lvs";
216				nvidia,function = "displaya";
217				nvidia,tristate = <TEGRA_PIN_ENABLE>;
218			};
219			/* Colibri LCD (Optional 24 BPP Support) */
220			lcd-24 {
221				nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
222					      "lpp", "lvp1";
223				nvidia,function = "displaya";
224				nvidia,tristate = <TEGRA_PIN_ENABLE>;
225			};
226
227			/* Colibri MMC */
228			mmc {
229				nvidia,pins = "atb", "gma";
230				nvidia,function = "sdio4";
231				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
232				nvidia,tristate = <TEGRA_PIN_ENABLE>;
233			};
234
235			/* Colibri MMCCD */
236			mmccd {
237				nvidia,pins = "gmb";
238				nvidia,function = "gmi_int";
239				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
240				nvidia,tristate = <TEGRA_PIN_ENABLE>;
241			};
242
243			/* Colibri MMC (Optional 8-bit) */
244			mmc-8bit {
245				nvidia,pins = "gme";
246				nvidia,function = "sdio4";
247				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
248				nvidia,tristate = <TEGRA_PIN_ENABLE>;
249			};
250
251			/*
252			 * Colibri Parallel Camera (Optional)
253			 * pins multiplexed with others and therefore disabled
254			 * Note: dta used for BL_ON by default
255			 */
256			cif-mclk {
257				nvidia,pins = "csus";
258				nvidia,function = "vi_sensor_clk";
259				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
260				nvidia,tristate = <TEGRA_PIN_ENABLE>;
261			};
262			cif {
263				nvidia,pins = "dtb", "dtc", "dtd";
264				nvidia,function = "vi";
265				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
266				nvidia,tristate = <TEGRA_PIN_ENABLE>;
267			};
268
269			/* Colibri PWM<C>, PWM<D> */
270			sdb_sdd {
271				nvidia,pins = "sdb", "sdd";
272				nvidia,function = "pwm";
273				nvidia,tristate = <TEGRA_PIN_ENABLE>;
274			};
275
276			/* Colibri SSP */
277			ssp {
278				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
279				nvidia,function = "spi4";
280				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
281				nvidia,tristate = <TEGRA_PIN_ENABLE>;
282			};
283
284			/* Colibri UART-A */
285			uart-a {
286				nvidia,pins = "sdio1";
287				nvidia,function = "uarta";
288				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
289				nvidia,tristate = <TEGRA_PIN_ENABLE>;
290			};
291			uart-a-dsr {
292				nvidia,pins = "lpw1";
293				nvidia,function = "rsvd3";
294				nvidia,tristate = <TEGRA_PIN_ENABLE>;
295			};
296			uart-a-dcd {
297				nvidia,pins = "lpw2";
298				nvidia,function = "hdmi";
299				nvidia,tristate = <TEGRA_PIN_ENABLE>;
300			};
301
302			/* Colibri UART-B */
303			uart-b {
304				nvidia,pins = "gmc";
305				nvidia,function = "uartd";
306				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
307				nvidia,tristate = <TEGRA_PIN_ENABLE>;
308			};
309
310			/* Colibri UART-C */
311			uart-c {
312				nvidia,pins = "uad";
313				nvidia,function = "irda";
314				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
315				nvidia,tristate = <TEGRA_PIN_ENABLE>;
316			};
317
318			/* Colibri USB_CDET */
319			usb-cdet {
320				nvidia,pins = "spdo";
321				nvidia,function = "rsvd2";
322				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
323				nvidia,tristate = <TEGRA_PIN_ENABLE>;
324			};
325
326			/* Colibri USBH_OC */
327			usbh-oc {
328				nvidia,pins = "spih";
329				nvidia,function = "spi2_alt";
330				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
331				nvidia,tristate = <TEGRA_PIN_ENABLE>;
332			};
333
334			/* Colibri USBH_PEN */
335			usbh-pen {
336				nvidia,pins = "spig";
337				nvidia,function = "spi2_alt";
338				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
339				nvidia,tristate = <TEGRA_PIN_ENABLE>;
340			};
341
342			/* Colibri VGA not supported */
343			vga {
344				nvidia,pins = "crtp";
345				nvidia,function = "crt";
346				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
347				nvidia,tristate = <TEGRA_PIN_ENABLE>;
348			};
349
350			/* I2C3 (Optional) */
351			i2c3 {
352				nvidia,pins = "dtf";
353				nvidia,function = "i2c3";
354				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
355				nvidia,tristate = <TEGRA_PIN_ENABLE>;
356			};
357
358			/* JTAG_RTCK */
359			jtag-rtck {
360				nvidia,pins = "gpu7";
361				nvidia,function = "rtck";
362				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
363				nvidia,tristate = <TEGRA_PIN_ENABLE>;
364			};
365
366			/*
367			 * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
368			 * (All On-module)
369			 */
370			gpio-gpv {
371				nvidia,pins = "gpv";
372				nvidia,function = "rsvd2";
373				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
374				nvidia,tristate = <TEGRA_PIN_DISABLE>;
375			};
376
377			/*
378			 * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
379			 * (All On-module); Colibri CAN_INT
380			 */
381			gpio-dte {
382				nvidia,pins = "dte";
383				nvidia,function = "rsvd1";
384				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
385				nvidia,tristate = <TEGRA_PIN_DISABLE>;
386			};
387
388			/* NAND (On-module) */
389			nand {
390				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
391					      "kbce", "kbcf";
392				nvidia,function = "nand";
393				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
394				nvidia,tristate = <TEGRA_PIN_DISABLE>;
395			};
396
397			/* Onewire (Optional) */
398			owr {
399				nvidia,pins = "owc";
400				nvidia,function = "owr";
401				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
402				nvidia,tristate = <TEGRA_PIN_ENABLE>;
403			};
404
405			/* Power I2C (On-module) */
406			i2cp {
407				nvidia,pins = "i2cp";
408				nvidia,function = "i2cp";
409				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
410				nvidia,tristate = <TEGRA_PIN_DISABLE>;
411			};
412
413			/* RESET_OUT */
414			reset-out {
415				nvidia,pins = "ata";
416				nvidia,function = "gmi";
417				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
418				nvidia,tristate = <TEGRA_PIN_DISABLE>;
419			};
420
421			/*
422			 * SPI1 (Optional)
423			 * Note: spid and spie used for Colibri Address/Data
424			 *       Bus (GMI)
425			 */
426			spi1 {
427				nvidia,pins = "spid", "spie", "spif";
428				nvidia,function = "spi1";
429				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
430				nvidia,tristate = <TEGRA_PIN_ENABLE>;
431			};
432
433			/*
434			 * THERMD_ALERT# (On-module), unlatched I2C address pin
435			 * of LM95245 temperature sensor therefore requires
436			 * disabling for now
437			 */
438			lvp0 {
439				nvidia,pins = "lvp0";
440				nvidia,function = "rsvd3";
441				nvidia,tristate = <TEGRA_PIN_ENABLE>;
442			};
443		};
444	};
445
446	tegra_ac97: ac97@70002000 {
447		status = "okay";
448		nvidia,codec-reset-gpio =
449			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
450		nvidia,codec-sync-gpio =
451			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
452	};
453
454	serial@70006040 {
455		compatible = "nvidia,tegra20-hsuart";
456		reset-names = "serial";
457		/delete-property/ reg-shift;
458	};
459
460	serial@70006300 {
461		compatible = "nvidia,tegra20-hsuart";
462		reset-names = "serial";
463		/delete-property/ reg-shift;
464	};
465
466	nand-controller@70008000 {
467		status = "okay";
468
469		nand@0 {
470			reg = <0>;
471			#address-cells = <1>;
472			#size-cells = <1>;
473			nand-bus-width = <8>;
474			nand-on-flash-bbt;
475			nand-ecc-algo = "bch";
476			nand-is-boot-medium;
477			nand-ecc-maximize;
478			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
479		};
480	};
481
482	/*
483	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
484	 * board)
485	 */
486	i2c@7000c000 {
487		clock-frequency = <400000>;
488	};
489
490	/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
491	hdmi_ddc: i2c@7000c400 {
492		clock-frequency = <10000>;
493	};
494
495	/* GEN2_I2C: unused */
496
497	/* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */
498
499	/* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */
500	i2c@7000d000 {
501		status = "okay";
502		clock-frequency = <100000>;
503
504		pmic@34 {
505			compatible = "ti,tps6586x";
506			reg = <0x34>;
507			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
508			ti,system-power-controller;
509			#gpio-cells = <2>;
510			gpio-controller;
511			sys-supply = <&reg_module_3v3>;
512			vin-sm0-supply = <&reg_3v3_vsys>;
513			vin-sm1-supply = <&reg_3v3_vsys>;
514			vin-sm2-supply = <&reg_3v3_vsys>;
515			vinldo01-supply = <&reg_1v8_vdd_ddr2>;
516			vinldo23-supply = <&reg_module_3v3>;
517			vinldo4-supply = <&reg_module_3v3>;
518			vinldo678-supply = <&reg_module_3v3>;
519			vinldo9-supply = <&reg_module_3v3>;
520
521			regulators {
522				reg_3v3_vsys: sys {
523					regulator-name = "VSYS_3.3V";
524					regulator-always-on;
525				};
526
527				vdd_core: sm0 {
528					regulator-name = "VDD_CORE_1.2V";
529					regulator-min-microvolt = <1200000>;
530					regulator-max-microvolt = <1200000>;
531					regulator-always-on;
532				};
533
534				sm1 {
535					regulator-name = "VDD_CPU_1.0V";
536					regulator-min-microvolt = <1000000>;
537					regulator-max-microvolt = <1000000>;
538					regulator-always-on;
539				};
540
541				reg_1v8_vdd_ddr2: sm2 {
542					regulator-name = "VDD_DDR2_1.8V";
543					regulator-min-microvolt = <1800000>;
544					regulator-max-microvolt = <1800000>;
545					regulator-always-on;
546				};
547
548				/* LDO0 is not connected to anything */
549
550				/*
551				 * +3.3V_ENABLE_N switching via FET:
552				 * AVDD_AUDIO_S and +3.3V
553				 * see also +3.3V fixed supply
554				 */
555				ldo1 {
556					regulator-name = "AVDD_PLL_1.1V";
557					regulator-min-microvolt = <1100000>;
558					regulator-max-microvolt = <1100000>;
559					regulator-always-on;
560				};
561
562				ldo2 {
563					regulator-name = "VDD_RTC_1.2V";
564					regulator-min-microvolt = <1200000>;
565					regulator-max-microvolt = <1200000>;
566				};
567
568				/* LDO3 is not connected to anything */
569
570				ldo4 {
571					regulator-name = "VDDIO_SYS_1.8V";
572					regulator-min-microvolt = <1800000>;
573					regulator-max-microvolt = <1800000>;
574					regulator-always-on;
575				};
576
577				/* Switched via FET from regular +3.3V */
578				ldo5 {
579					regulator-name = "+3.3V_USB";
580					regulator-min-microvolt = <3300000>;
581					regulator-max-microvolt = <3300000>;
582					regulator-always-on;
583				};
584
585				ldo6 {
586					regulator-name = "AVDD_VDAC_2.85V";
587					regulator-min-microvolt = <2850000>;
588					regulator-max-microvolt = <2850000>;
589				};
590
591				reg_3v3_avdd_hdmi: ldo7 {
592					regulator-name = "AVDD_HDMI_3.3V";
593					regulator-min-microvolt = <3300000>;
594					regulator-max-microvolt = <3300000>;
595				};
596
597				reg_1v8_avdd_hdmi_pll: ldo8 {
598					regulator-name = "AVDD_HDMI_PLL_1.8V";
599					regulator-min-microvolt = <1800000>;
600					regulator-max-microvolt = <1800000>;
601				};
602
603				ldo9 {
604					regulator-name = "VDDIO_RX_DDR_2.85V";
605					regulator-min-microvolt = <2850000>;
606					regulator-max-microvolt = <2850000>;
607					regulator-always-on;
608				};
609
610				ldo_rtc {
611					regulator-name = "VCC_BATT";
612					regulator-min-microvolt = <3300000>;
613					regulator-max-microvolt = <3300000>;
614					regulator-always-on;
615				};
616			};
617		};
618
619		/* LM95245 temperature sensor */
620		temp-sensor@4c {
621			compatible = "national,lm95245";
622			reg = <0x4c>;
623		};
624	};
625
626	pmc@7000e400 {
627		nvidia,suspend-mode = <1>;
628		nvidia,cpu-pwr-good-time = <5000>;
629		nvidia,cpu-pwr-off-time = <5000>;
630		nvidia,core-pwr-good-time = <3845 3845>;
631		nvidia,core-pwr-off-time = <3875>;
632		nvidia,sys-clock-req-active-high;
633		core-supply = <&vdd_core>;
634
635		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
636		i2c-thermtrip {
637			nvidia,i2c-controller-id = <3>;
638			nvidia,bus-addr = <0x34>;
639			nvidia,reg-addr = <0x14>;
640			nvidia,reg-data = <0x8>;
641		};
642	};
643
644	memory-controller@7000f400 {
645		emc-table@83250 {
646			reg = <83250>;
647			compatible = "nvidia,tegra20-emc-table";
648			clock-frequency = <83250>;
649			nvidia,emc-registers =   <0x00000005 0x00000011
650				0x00000004 0x00000002 0x00000004 0x00000004
651				0x00000001 0x0000000a 0x00000002 0x00000002
652				0x00000001 0x00000001 0x00000003 0x00000004
653				0x00000003 0x00000009 0x0000000c 0x0000025f
654				0x00000000 0x00000003 0x00000003 0x00000002
655				0x00000002 0x00000001 0x00000008 0x000000c8
656				0x00000003 0x00000005 0x00000003 0x0000000c
657				0x00000002 0x00000000 0x00000000 0x00000002
658				0x00000000 0x00000000 0x00000083 0x00520006
659				0x00000010 0x00000008 0x00000000 0x00000000
660				0x00000000 0x00000000 0x00000000 0x00000000>;
661		};
662		emc-table@133200 {
663			reg = <133200>;
664			compatible = "nvidia,tegra20-emc-table";
665			clock-frequency = <133200>;
666			nvidia,emc-registers =   <0x00000008 0x00000019
667				0x00000006 0x00000002 0x00000004 0x00000004
668				0x00000001 0x0000000a 0x00000002 0x00000002
669				0x00000002 0x00000001 0x00000003 0x00000004
670				0x00000003 0x00000009 0x0000000c 0x0000039f
671				0x00000000 0x00000003 0x00000003 0x00000002
672				0x00000002 0x00000001 0x00000008 0x000000c8
673				0x00000003 0x00000007 0x00000003 0x0000000c
674				0x00000002 0x00000000 0x00000000 0x00000002
675				0x00000000 0x00000000 0x00000083 0x00510006
676				0x00000010 0x00000008 0x00000000 0x00000000
677				0x00000000 0x00000000 0x00000000 0x00000000>;
678		};
679		emc-table@166500 {
680			reg = <166500>;
681			compatible = "nvidia,tegra20-emc-table";
682			clock-frequency = <166500>;
683			nvidia,emc-registers =   <0x0000000a 0x00000021
684				0x00000008 0x00000003 0x00000004 0x00000004
685				0x00000002 0x0000000a 0x00000003 0x00000003
686				0x00000002 0x00000001 0x00000003 0x00000004
687				0x00000003 0x00000009 0x0000000c 0x000004df
688				0x00000000 0x00000003 0x00000003 0x00000003
689				0x00000003 0x00000001 0x00000009 0x000000c8
690				0x00000003 0x00000009 0x00000004 0x0000000c
691				0x00000002 0x00000000 0x00000000 0x00000002
692				0x00000000 0x00000000 0x00000083 0x004f0006
693				0x00000010 0x00000008 0x00000000 0x00000000
694				0x00000000 0x00000000 0x00000000 0x00000000>;
695		};
696		emc-table@333000 {
697			reg = <333000>;
698			compatible = "nvidia,tegra20-emc-table";
699			clock-frequency = <333000>;
700			nvidia,emc-registers =   <0x00000014 0x00000041
701				0x0000000f 0x00000005 0x00000004 0x00000005
702				0x00000003 0x0000000a 0x00000005 0x00000005
703				0x00000004 0x00000001 0x00000003 0x00000004
704				0x00000003 0x00000009 0x0000000c 0x000009ff
705				0x00000000 0x00000003 0x00000003 0x00000005
706				0x00000005 0x00000001 0x0000000e 0x000000c8
707				0x00000003 0x00000011 0x00000006 0x0000000c
708				0x00000002 0x00000000 0x00000000 0x00000002
709				0x00000000 0x00000000 0x00000083 0x00380006
710				0x00000010 0x00000008 0x00000000 0x00000000
711				0x00000000 0x00000000 0x00000000 0x00000000>;
712		};
713	};
714
715	/* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
716	usb@c5004000 {
717		status = "okay";
718		#address-cells = <1>;
719		#size-cells = <0>;
720
721		ethernet@1 {
722			compatible = "usbb95,772b";
723			reg = <1>;
724			local-mac-address = [00 00 00 00 00 00];
725		};
726	};
727
728	usb-phy@c5004000 {
729		status = "okay";
730		nvidia,phy-reset-gpio =
731			<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
732		vbus-supply = <&reg_lan_v_bus>;
733	};
734
735	clk32k_in: clock-xtal3 {
736		compatible = "fixed-clock";
737		#clock-cells = <0>;
738		clock-frequency = <32768>;
739	};
740
741	opp-table-emc {
742		/delete-node/ opp-760000000;
743	};
744
745	reg_lan_v_bus: regulator-lan-v-bus {
746		compatible = "regulator-fixed";
747		regulator-name = "LAN_V_BUS";
748		regulator-min-microvolt = <5000000>;
749		regulator-max-microvolt = <5000000>;
750		enable-active-high;
751		gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
752	};
753
754	reg_module_3v3: regulator-module-3v3 {
755		compatible = "regulator-fixed";
756		regulator-name = "+V3.3";
757		regulator-min-microvolt = <3300000>;
758		regulator-max-microvolt = <3300000>;
759		regulator-always-on;
760	};
761
762	sound {
763		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
764			     "nvidia,tegra-audio-wm9712";
765		nvidia,model = "Toradex Colibri T20";
766		nvidia,audio-routing =
767			"Headphone", "HPOUTL",
768			"Headphone", "HPOUTR",
769			"LineIn", "LINEINL",
770			"LineIn", "LINEINR",
771			"Mic", "MIC1";
772		nvidia,ac97-controller = <&tegra_ac97>;
773		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
774			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
775			 <&tegra_car TEGRA20_CLK_CDEV1>;
776		clock-names = "pll_a", "pll_a_out0", "mclk";
777	};
778};
779