1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board 4 * 5 * Copyright (C) 2012 Atmel, 6 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> 7 */ 8/dts-v1/; 9#include "at91sam9g25.dtsi" 10#include "at91sam9x5ek.dtsi" 11 12/ { 13 model = "Atmel AT91SAM9G25-EK"; 14 compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; 15}; 16 17&i2c0 { 18 camera@30 { 19 compatible = "ovti,ov2640"; 20 reg = <0x30>; 21 pinctrl-names = "default"; 22 pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; 23 resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; 24 pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; 25 clocks = <&pmc PMC_TYPE_SYSTEM 8>; 26 clock-names = "xvclk"; 27 assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; 28 assigned-clock-rates = <25000000>; 29 status = "okay"; 30 31 port { 32 ov2640_0: endpoint { 33 remote-endpoint = <&isi_0>; 34 bus-width = <8>; 35 }; 36 }; 37 }; 38}; 39 40&isi { 41 status = "okay"; 42 43 port { 44 isi_0: endpoint@0 { 45 reg = <0>; 46 remote-endpoint = <&ov2640_0>; 47 bus-width = <8>; 48 vsync-active = <1>; 49 hsync-active = <1>; 50 }; 51 }; 52}; 53 54&macb0 { 55 phy-mode = "rmii"; 56 status = "okay"; 57}; 58 59&mmc1 { 60 status = "disabled"; 61}; 62 63&spi0 { 64 status = "disabled"; 65}; 66